Used Serrmac Drill Press for sale (17,111)

Condition: used, Year of construction: 1966, Press force: 200 t Stroke: 600 mm Frame width: 1100 mm Shut height (stroke up): 1100 mm Table area: 1000 x 1000 mm Cushion force in table: 63 t Cushion stroke in table: 250 mm Cushion area in table: 800 x 750 mm Bwsdpjzyniwjfx Aqwet Table height above floor: 800 mm Ram area: 1000 x 1000 mm

Condition: excellent (used), Year of construction: 2014, feed length X-axis: 300 mm, feed length Y-axis: 300 mm, feed length Z-axis: 500 mm, General Aspects MAIN MOVEMENTS Maximum drilling depth - Z-axis: 500 mm Table, longitudinal movement - X-axis: 300 mm Table, vertical movement - Y-axis: 300 mm Drilling slide, piece support - W-axis: 50 mm DRILLING SPINDLE Drilling diameter without pre-drill, optimal: 3 – 12 mm Distance between the bits: 250 mm Drilling spindle, rotation speed min - max: 0 - 6.000 rpm Drilling spindle motor power: 7.5 kW (S1) Cannon drill holder, for diameters less than 6 mm: Ø 10 x 40 mm Bwjdpfxou Au Duo Aqwjt Cannon drill holder, for diameters greater than 6 mm: Ø 25 x 70 mm CLAMPING TABLE Fixed clamping table, surface dimensions: 500 x 600 mm Maximum load capacity of the fixed table: 1.000 kg Standard type clamping slots: 18 mm OIL Cutting oil flow rate: 50 lt./min Cutting oil pressure: 90 bar Hydraulic pump motor power: 7.5 kW Hydraulic pump motor capacity: 600 lt Adjustable temperature: 27°-30°C DIMENSIONS AND WEIGHTS Width x length: 4.450 x 3.000 mm Approximate weight: 2.210 Kg POWER SUPPLY Electrical power supply: 400 V/3-phase/50-60 Hz Compressed air: 6 bar Total installed power: 25 kW

Condition: used, Year of construction: 1975, Press force: 200 t Stroke: 600 mm Frame width: 1910 mm Side frame opening: 1000 mm Bjdpfx Aqezynf Eswswt Shut height (stroke up): 800 mm Table area: 1900 x 1150 mm Cushion force in table: 80 t Cushion stroke in table: 300 mm Cushion area in table: 1500 x 950 mm Table height above floor: 800 mm

Condition: used, Year of construction: 1957, Press force: 100 tons Stroke: 30 - 160 mm Strokes per minute: 40/min Throat depth: 315 mm Passage between frame walls: 400 mm Shut height (max. stroke, adjustment up): 460 mm Table area: 910 x 680 mm Table opening: 400 mm Table height above floor: 800 mm Bwsdpozymurefx Aqwet Ram area: 630 x 400 mm

Condition: used, Year of construction: 1972, Press force: 150 t Stroke: 180 mm Frame width: 300 mm Bwodpfxjzymlqe Aqwjt Side frame opening: 180 mm Shut height (stroke up): 300 mm Table area: 570 x 410 mm Table height above floor: 875 mm Ram area: 180 mm Downstroke speed: 250 mm/s Upstroke speed: 160 mm/s

Condition: excellent (used), Offer consisting of: Heidelberg SM52-2P, year of manufacture 2004, complete N+P available. Bwjdpfoy Aictjx Aqwet

Condition: used, Year of construction: 1987, Press force: 160 t Stroke: 200 mm Throat depth: 360 mm Passage between frame columns: 590 mm Shut height (stroke up): 500 mm Table area: 920 x 700 mm Table opening: 150 mm Table height above floor: 960 mm Ram area: 620 x 560 mm Downstroke speed: 390 mm/s Bwedpozymdaefx Aqwot

Condition: used, Year of construction: 1975, Press brake manufactured by FISCHER, model HAKS 10/3200. Pressing force approximately 100 tons. Year of manufacture 1975. Brief summary provided – a full technical translation will follow if required for this lot. Bwedpfezymazex Aqwjt

Condition: used, Year of construction: 1994, Pressing force: 100 t Stroke: 600 mm Bwodpjzyl Nbofx Aqwet Frame width: 910 mm Side frame opening: 685 mm

Condition: used, Year of construction: 1980, Press force: 250 t Stroke: 250 mm Frame width: 1125 mm Side frame opening: 700 mm Shut height (stroke up): 800 mm Bwedpfezyl Hajx Aqwst Table area: 1100 x 900 mm Cushion force in table: 63 t Cushion stroke in table: 100 mm Cushion area in table: 700 x 400 mm Table height above floor: 960 mm

Condition: used, Year of construction: 1978, Press force: 500 t Stroke: 600 mm Frame width: 1550 mm Side frame opening: 1250 mm Shut height (stroke up): 900 mm Table area: 1200 x 1300 mm Bwjdozyl Drjpfx Aqwst Cushion force in table: 250 t Cushion stroke in table: 150 mm Cushion area in table: 950 x 950 mm Table height above floor: 1245 mm

Condition: used, Year of construction: 1987, Pressing force: 65 t Stroke: 1100 mm Bwodpfx Aqozyl Dfewet Frame width: 930 mm Side frame opening: 705 mm

Condition: used, Year of construction: 1979, Press force: 1000 t Stroke: 350 mm Frame width: 3030 mm Side frame opening: 1450 x 1400 mm Shut height (stroke up): 1400 mm Table area: 3000 x 2000 mm Table height above floor: 430 mm Ram area: 3000 x 2000 mm Downstroke speed: 300 mm/s Upstroke speed: 340 mm/s Note: The machine is partially disassembled and currently in storage. Bwsdpfx Aqjzyl Anewot

Condition: ready for operation (used), travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, space requirement width: 950 mm, space requirement length: 1,300 mm, space requirement height: 1,670 mm, spindle stroke: 95 mm, Coordinated drilling machine, tapping machine, milling machine with digital display X: 600mm Y: 500mm Spindle stroke: 95mm 2 speed stages 2-axis digital control Dimensions: 1300mm x 950mm x 1670mm (L x W x H) Albrecht drill chuck: 0-10 Pneumatically adjustable Heidenhain digital display You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Bsdpfx Aszyqqweqwowt Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Alzmetall AB 45 S Pillar Drill Machine, Drilling Machine Speed: 25-640 rpm Overhang: 350 mm Quill stroke: 180 mm Drilling capacity in steel: 45 mm Dimensions: approx. 1200 mm x 800 mm x 2300 mm (W x D x H) Bwodpfx Ajzyp Axsqwst Weight: 950 kg You are welcome to come by for an inspection. We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HaRo2020, total width: 800 mm, total height: 1,100 mm, total length: 1,200 mm, briquette diameter: 60 mm, overall weight: 300 kg, warranty duration: 12 months, type of input current: AC, input voltage: 400 V, power: 3 kW (4.08 HP), Equipment: emergency stop, Our new HaRo2020 briquetting press, with a capacity of up to 40 kg/h, automatic tongs, and pre-compactor, is manufactured by ourselves. You can only purchase this machine directly from us, as we do not use intermediaries. The briquetting presses are CE-compliant and manufactured according to the latest standards. Since we produce most of the components in-house, we can offer the machine at a particularly competitive price. Price is exclusive of VAT. Bedpfx Ajw A Hvdsqwewt The new hydraulic unit is equipped with a SILENCE-PUMP, making the machine extremely quiet in operation. Another benefit of the helical gearing in the pump is increased durability. Everything is made in Germany! You are welcome to visit us and test the machine with your own material. When purchasing our briquetting press, you will receive a detailed and comprehensive German (PDF) operating manual for this machine. The input material must have a moisture content below 15%—ideally 10 to 12%—for sawdust and planer shavings. Technical Data – Hydraulic unit: 3.0 kW (connected load) – Power consumption per hour: approx. 1.8–2.0 kWh – Throughput: approx. 15–40 kg/h – Voltage: 400 V – Frequency: 50 Hz – Circuit protection: 16 A plug – Power cable length: 3 m – Hydraulic control with Bosch Rexroth valves – Briquette diameter: 60 mm (length varies according to material) – Motor equipped with motor protection switch and emergency stop—for operator and machine safety, including motor protection – No electronic components prone to failure such as controllers, sensors, or complicated electronics – Pressing without additives – Counter-pressure adapts fully automatically to your material – Thanks to the pre-compactor, bulky shavings are no problem – No adjustments or monitoring of the pressure required – Fully automatic operation Spare parts supply is guaranteed, as we manufacture the machines in small series in our facility in Germany. The large oil tank ensures that the oil will not overheat during continuous operation. Machine dimensions: Length: 1.25 m Width: 0.82 m Height: 1.11 m Feed hopper: Diameter approx. 80 cm x height 60 cm Weight: 300 kg The briquetting press is immediately operational and does not require installation—just plug it in and start working. The machine can be viewed and tested on-site. You are welcome to send us a sample of your material for testing; we find this is the most effective method.

Year of construction: 1985, condition: used, Max. pressing force: 150t, bending length: 4050mm, backgauge: 750mm, control: Cybelec CNC 7200 P, weight: approx. 15t. Equipped with hydraulic tool clamping, crowning system, height-programmable backgauge, two control panels and two pneumatic bending aids. Including stand with various upper tools and dies as well as various special accessories manufactured in-house. Documentation available. An on-site inspection is possible. Bsdpfx Aezx Ehboqwjwt

Year of construction: 2000, condition: used, - 5 printing units (letterpress) with magnetic cylinder - 1 flexographic coating unit - 6 UV drying units (air-cooled) - Rotary die-cutting unit with magnetic cylinder - GAP Master - BST POWER SCOPE 3000 "Pro Mark Edition" - video system for print quality control Bodpfx Aqezx N Hhswjwt The scope of supply also includes a rotary die-cutting unit for the back of the web; this can be used in place of the flexographic coating unit. Maximum web width: 340 mm Minimum web width: 120 mm

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: FLA52084COGAG5E0, Tapered die set for LAMEC 520/182 press / die set Bodpfezxz U Rex Aqwewt - Ø6.0 x 65 / 40

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 331.00465, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 16 t, stroke length: 100 mm, operating speed: 90 mm/s, overall weight: 950 kg, Model:PE6-16 Pressure/Tonnage: 16 Tons Distance Over Bed: 600mm Full Length Top and Bottom Tooling Guarding Bsdpfx Aqozux Rujwowt Control: CNC 402

Condition: used, Year of construction: 2013, pressing force: 500 t, total length: 6,000 mm, total width: 3,000 mm, total height: 5,000 mm, overall weight: 200,000 kg, Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Ram cushion: Force: 2,000 kN Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces. Pressing force max.: 500 t Dimensions (LxWxH) approx.: 6000 x 3000 x 5000 mm Weight approx.: 200,000 kg Year of construction: 2,013 Condition: in working order Terms of payment: 100% prepayment before pick-up Bedpfozyd Hlox Aqwjwt Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 1999, machine/vehicle number: 80858, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 150 t, stroke length: 200 mm, total length: 4,400 mm, total width: 1,700 mm, total height: 2,500 mm, overall weight: 10,400 kg, Equipment: CE marking, HACO ERM 40150 (80858) Technical condition: Used Bending length: 4100 mm Bwodpfx Aezxg Hxeqwst Tonnage: 150 T Type of press brake: Synchronized Back gauge: Y1 + Y2 + X-R CNC controlled Back gauge length: 800 mm Crowning: Yes (CNC controlled) Daylight opening: 400 mm Stroke: 200 mm Control: BC 45 Robosoft graphical control Motor power: 15.0 kW 400V Tooling: Yes, 1 set of bending tools Tooling standard: European standard Overall length: 4400 mm Overall depth: 1700 mm Overall height: 2500 mm Weight: 10,400 kg Serial number: 80858 Year of manufacture: 1999 Delivery and installation at your location are, of course, possible; delivery costs and any additional costs will be discussed.

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 82885, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 135 t, stroke length: 200 mm, total length: 3,500 mm, total width: 1,700 mm, total height: 2,500 mm, overall weight: 7,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HACO ERM 30135 (82885) Completely rebuilt, including a new control system. Technical condition: As new. Bending length: 3100 mm Tonnage: 135 tons Type of press brake: Synchronized Back gauge: Y1 + Y2 + X CNC controlled, R-axis manual Back gauge length: 800 mm Crowning: Yes (manual) Throat depth: 400 mm Overhang: 250 mm Stroke: 200 mm Bjdpfezxgrhjx Aqwewt Control system: ATS 595 Motor power: 15.0 kW, 400V Tooling: Yes, multiple sets of bending tools Tooling standard: European standard Year of manufacture: 2007 Overall length: 3500 mm Overall depth: 1700 mm Overall height: 2500 mm Delivery and installation at your location are possible; delivery costs and any additional charges will be discussed separately.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 83888, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 150 t, distance table to ram: 3,150 mm, total length: 4,100 mm, total height: 2,500 mm, overall weight: 8,500 kg, Equipment: CE marking, documentation/manual, HACO ERM 36150 (83888) Technical condition: New Bending length: 3600 mm Tonnage: 150T Type of press brake: Synchronized Back gauge: Y1 + Y2 + X CNC controlled, R-axis manual Back gauge length: 800 mm Crowning: Yes (manual) Daylight opening: 400 mm Control system: EASYBEND 2D Motor power: 15.0 kW, 400V Tooling: Yes, multiple sets of bending tools Tooling standard: European standard Total length: 4100 mm Total depth: 1700 mm Total height: 2500 mm Weight: 8500 kg Bsdpfszxgrbsx Aqwjwt Serial number: 83888 Delivery and installation at your location are possible; delivery costs and any additional charges will be discussed.

Condition: good (used), Storage location: 3092 Manufacturer: WEBO (presumably) Type/Model: B3 Drilling capacity: 6 mm Spindle mount: Drill chuck Speed range: 1,600 to 9,000 rpm Overhang: 100 mm Table: 230 x 180 mm Stroke: 50 mm Total power consumption: kW Motor: FDM120/40.3401/2, 2,880 rpm Accessories/Equipment: Condition: good Bwjdpfx Aqjzx Rxrjwot Footprint: 230 x 270 mm Weight: Dimensions: 230 x 440 x 400 mm