Used Shandon Hyperclean 1 Grossing Station for sale (82,331)

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. Nwjdjyx Irljpfx Aa Ioh 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Condition: good (used), Year of construction: 1990, Ref. -No.: 10301 Manufacturer: TITAN Type: RU 350 x 1-1500 Year of construction: 1990 Nwedpjycpv Sefx Aa Ish Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm

Condition: used, Year of construction: 1972, Dreh-Øüber Bett 400 mm Dreh-Øüber Support 220 mm turning length 1000 mm spindle turning speed range 12,5 - 2000 U/min spindle taper Bajonett 55022 spindle bore 47 mm feeds - longitudinal 0,07 - 4,16 mm/U feeds - cross 0.035 - 2,08 mm/U thread - mm pitch mm thread - inch 2 - 24 Gang/ inch. rapid travel - longitudinal/face 3,4 / 1,7 m/min spindle drive 11 kW power capacity 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992 Nedpfovzhhyox Aa Iowh

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Nedpfx Aozg H R Tea Iowh Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Cone SA40 DECKEL Spindle speed: from 40 to 2000 RPM Table size: 600 x 210 mm Horizontally tiltable head Straight table Spindle motor: 2 speeds Motor: 1,3 kW Feeds: X - Z auto / Y manual Voltage: 380 V Width: 1200 mm Depth with electrical panel: 1200 mm Height:1600 mm Weight: approx 900 kg

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Cone CM4 DECKEL Spindle speed: from 40 to 2000 RPM Horizontally tiltable head Spindle motor: 2 speeds Motor: 1,5 kW Feeds: X - Z auto / Y manual Supplied without table only with one 4 concentric jaws Ø 140 mm Voltage: 380 V Width: 1200 mm Depth: 1200 mm Total height: 1600 mm Weight: approx 900 KG Nwedpfezg H R Hox Aa Ieh

Condition: used, Year of construction: 2003, Welding Rotator SAF POSISAF 1E Shelf diameter: Ø 295 mm Year of construction: 2003 Maxi Capacity: 100 kg Manual Swivel Rotation by speed varitator right/left Voltage: 220 V mono Total dimensions on support: 400 x 400 mm x H 1100 mm Njdjzg Hwtopfx Aa Iewh

Condition: used, Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Nwjdpfxjzg Hvpo Aa Ioh Width: 2200 mm Height in horizontal position: 1700 mm Weight: approx 4 T

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T Nwodjzg Hulopfx Aa Ieh

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm Nedpfxezg Hk He Aa Iewh 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Technical details: pipe system - processing diameter: 200 mm pipe system - inlet: 200 mm volume flow ventilator - shred: 1200 m³/h electrics - voltage/frequency: 400/50 V/Hz filter cartridge type: Stahlwolle filter surface area: 450 x 450 mm total power requirement: 570 W weight of the machine approx.: 55 kg dimension machine xH: 0,55 x 0,9 x 0,83 m Dust mist suction and filter - Oil mist extraction system -suction Ø 300 x 90mm right side -exhaust air 430 x 300mm ceiling side -2x condensate drain 1 1/4" (blind plug) Nwsdpfeu Nv Arox Aa Ish The Ultra Cleaner type UC 1 is suitable for direct extraction from machining centers using emulsion, with a machining chamber volume between 1 m³ and 4 m³. *

Condition: used, mileage: 382,416 km, power: 290 kW (394.29 HP), first registration: 10/2007, fuel type: diesel, empty load weight: 6,450 kg, maximum load weight: 8,550 kg, tire size: 305 / 70 R 22.5/10mm, axle configuration: 4x2, next inspection (TÜV): 01/2025, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, total width: 25,500 mm, front tire size: 305 / 70 R 22.5/10mm, operation weight: 15,000 kg, Equipment: air conditioning,

Condition: used, Year of construction: 1994, Technical Specifications: - Manufacturer: IST - Year of manufacture: 1994 - Working width: 1300 mm Nsdjzf N Tnjpfx Aa Ijwh - With 3D mirrors - Number of tubes (viewed from above): 1 - Tube positioned at an angle - Electrode spacing 1620 mm - Suitable for drying edges - Suitable for mercury and gallium tubes. - Tube power 80 W/cm - For mounting on an existing conveyor - Location: in storage - Volts, Hz 400 / 50 - Good condition

Year of construction: 2026, condition: used, NEW, built in 2026 Automatic loading and unloading station. Suitable for solid wood, MDF, gypsum board, cement fiber board, and planks. Examples: Doors, planks, MDF panels, cabinet fronts, gypsum board, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed andwith a set loading and unloading capacity. This allows you to easily automateyour loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel. Technical Specifications: - Manufacturer: Ka-Ma - Model: KR-1300-1 - Working width: 1,300 mm - Includes belt conveyor, length 3,000 mm - Working height: 930 ± 50 mm - PLC control, operated via a touch panel, Siemens S7-1200 - Loading and unloading of parts via 2 suction plates, length 442 mm - Automatic signal upon completion of the loading process Nwodpfx Aoy S S Htja Ieh - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 85 kg, continuous operation 65 kg - Max. component width: 1,300 mm - Max. component length: approx. 2,850 mm - Max. conveyor belt speed: continuously variable up to max. 10 m/min. - Electric motor power: 1.5 kW- Electronic components: Schneider Electronics and Siemens - Weight: 1,200 kg Optional: 2-circuit vacuum system with 4 additional suction cups and the ability to lift the panels 15 mm on one side before vertical movement; required for all materials that can be vacuum-sealed. YouTube link:?v=WpRUnvPFqN0

Condition: used, Year of construction: 1997, machine/vehicle number: MR1TLL97037, - Manufacturer Cefla / Sorbini - Type T / 20-SP-1 - year of construction 1997 - Working width 1300 mm - working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side right - Filler application cylinder ~250 mm - Hard chrome-plated metering roller 174 mm - Hard chrome-plated smoothing roller 245 mm - Reverse drive Nwjdpfx Aszf N E Rja Ieh - Belt transport - Belt control - Length ~ 1640 mm - width 2590 mm - height ~ 1700 mm - Feed rate 6 - 24 m/min - Total connection 4.5 kW - Weight 2,000 kg - With switch cabinet - Volt, Hz 400 / 50 - Location, not in stock

Condition: used, mileage: 96,650 km, power: 130 kW (176.75 HP), first registration: 05/2022, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space volume: 28 m³, loading space length: 5,086 mm, loading space width: 2,480 mm, loading space height: 2,253 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), ATEGO 818 L Deep Freeze Box Body 5.10 m with Doors + Tail Lift 1 tonne * Body: KIESLING with side door on the right + temperature partition * THERMOKING T-600 R (diesel engine) and standby cooling 380 V ELECTRIC * Deep freeze -25° C * Chilled goods 0° C & heating mode +25° C – full range of temperature options * Vehicle no. for customer inquiries: 4430 * Engine configuration Euro VI, E * Active Brake Assist * Rear axle differential lock * Air conditioning * Lane departure warning * Environmental badge (green) * High performance engine brake * Light sensor * Air suspension, rear axle * Rain sensor * Full service history * Electronic Stability Program (ESP) * Driver airbag * Electronic braking system with ABS and ASR * Comfort driver's suspension seat * Electric windows, both sides * Mercedes PowerShift 3 * Reversing warning system, combined with hazard warning system * Central locking system * Cruise control * Two-seater * High storage compartment on engine tunnel * AdBlue tank 35 l * Work lights for maneuvering assistance * Roof hatch/ventilation flap roof * Transmission G 70-6/5.94-0.74 * Main mirror, electric, driver's side * Heating, electronic compressed air supply unit * Plastic fuel tank 120 l, left * Engine OM934, R4, 5.1 l, 130 kW (177 HP), 750 Nm * Wheelbase 3620 mm * S-Cab ClassicSpace, 2.30 m, tunnel * Side sunblind, driver's side * Heavy-duty anti-roll bar, rear axle * Pre-equipment for toll collection * Tubeless tires, 215/75 R 17.5 front/rear axle * Digital tachograph, 2nd generation * Weight variant 7.49 t (3.6/4.6) * 2/3-door No liability for printing or typographical errors Sales to business customers only Subject to prior sale and changes. All information is subject to confirmation, errors and prior sale reserved. This description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The definitive description is the one in the sales contract. * TOP SERVICE + QUALITY * We can gladly offer you a LEASING-FINANCING-HIRE PURCHASE proposal Warranty insurance available on request from the insurer * TÜV / UVV tail lift / tachograph inspection and installation of OBU device by our local partners * Export registration plates for 30 days All export documents can be provided upon request, but must be arranged individually * Toll for Toll-Collect can be arranged in house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * Always over 200 vehicles in stock Nwsdpfoxtrp Usx Aa Ieh

Condition: used, mileage: 96,650 km, power: 130 kW (176.75 HP), first registration: 05/2022, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, number of seats: 2, loading space volume: 28 m³, loading space length: 5,086 mm, loading space width: 2,480 mm, loading space height: 2,253 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), ATEGO 818 L Refrigerated Box Body 5.10 m with Doors + Tail Lift 1 ton * Body: KIESLING with right-hand side door + temperature partition Nsdoxtrqfjpfx Aa Iowh * THERMOKING T-600 R (diesel engine) and stationary cooling 380 V ELECTRIC * Deep freeze -25°C * Fresh service 0°C & heating mode +25°C – all temperature ranges possible * Vehicle No. for customer inquiries: 4430 * Engine Euro VI, E * Active Brake Assist * Rear axle differential lock * Air conditioning * Lane keeping assist * Environmental sticker (green) * High performance engine brake * Light sensor * Air suspension, rear axle * Rain sensor * Full service history * Stability control system (ESP) * Driver airbag * Electronic braking system with ABS and ASR * Comfort driver suspension seat * Electric windows, both sides * Mercedes PowerShift 3 * Reversing warning system, combined with hazard warning lights * Central locking system * Cruise control * Two-seater * Overhead storage, high, on engine tunnel * AdBlue tank 35 l * Work spotlight for maneuvering * Roof hatch/ventilation flap * Transmission G 70-6/5.94-0.74 * Main mirror, electric, driver’s side * Electronic compressed air supply unit for heating * Plastic fuel tank 120 l, left * Engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm * Wheelbase 3620 mm * S-Cab ClassicSpace, 2.30 m, tunnel * Sun blind, side, driver’s side * Stabilizer for extreme heavy loads, rear axle * Pre-equipment for toll recording * Tubeless tires, 215/75 R 17.5 front/rear * Digital tachograph, 2nd generation * Weight variant 7.49 t (3.6/4.6) * 2/3-door No liability for printing or typographical errors Sale only to traders Subject to errors and prior sale* Amendments, prior sale, and errors expressly excepted. The description serves to identify the vehicle and does not constitute a guarantee in the sense of sales law. Only the description according to the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING-FINANCING-HIRE PURCHASE offer Warranty insurance available on request from the insurer * TÜV / UVV tail lift / tachograph inspection and installation of OBU device by our local partners * Customs plates for 30 days All export customs documents possible, must be requested individually * TOLL for Toll-Collect can be arranged in-house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * over 200 vehicles in stock at all times

Condition: new, Year of construction: 2022, Paint mist extraction New device Year of manufacture: 2022 Ideal for woodworking companies, joineries/cabinetmaking shops, and trades in general Highly efficient air purification with a high separation rate Mobile unit for use at various locations in the workshop Easy handling Certified for ATEX Zone 2 Long filter service life Ready-to-plug-in delivery Extraction nozzle diameter: 300 mm Dimensions (L x W x H): approx. 1012 x 1135 x 1405 mm Nsdpfsw I Uygox Aa Iowh Connection: 1.5 kW / 400 V Filter area: 1 m² Maximum noise emission sound pressure level: 72 dB(A) Maximum volume flow: 500 Pa Weight: 175 kg Incl. starter set for FAG 1-4 (€445) Diameter: 300 mm (3 m hose, 2 hose clamps, 1 collar with flanged ring, 1 closure flap for exterior wall) Availability: short-term Location: Hochheim

Condition: new, Work and assembly table New unit Year of manufacture: 2023 The ergonomic work and assembly table ErgoPlan EP1 is equipped with a workbench top made of selected, solid red beech wood. The surface is waxed and polished. The stepless height adjustment under load is smooth and precise – even with asymmetrical loading of the table top. TECHNICAL DATA Workbench top without clamps: 1,700 x 640 x 120 mm 2 clamp keys: Front clamp made of solid cast/steel construction, rear clamp robust aluminum guide (with adjustable guide prism and plastic sliding guide) Table top thickness: 120 / 60 mm Useful stroke: 300 mm Overall height ErgoPlan: 780 mm Weight of the workbench top: approx. 95 kg Weight: approx. 240 kg The attached panel on the back serves as a protective cover against shearing and as a crush protection cover. The lifting unit is concealed in the left lifting column and is therefore protected from dirt and damage. Load capacity up to 400 kg Overall height max. 1080 mm 2 bench hooks Ergoplan, consisting of aluminum round bench hooks with ball lock 30 mm, length 200 mm Njdjkwhwzepfx Aa Iswh 1 vertical clamp for securing the workpiece from above, with 1 indexing pin, adjustable up to 200 mm workpiece thickness, 360° swiveling Availability: short-term Location: Flörsheim

Year of construction: 2018, condition: new, Demonstration machine Year of manufacture: 2018 With full warranty Features and technical data: Functionality · Room geometry capture via laser measurements · Total station function: standard measurement points can be augmented by custom measurement points · Complex 360° panoramic capture from each room scan · Image and measurement functions for every detail · Complete photographic documentation · Preview panorama display via HottScan app · Data transfer via USB stick or WiFi with app Technical Data Overview Angle meter features Measurement range: Horizontal 347°, Vertical 180° Accuracy: 0.01°, relative Njdpfx Aow I Uizsa Iswh Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05–80 m Laser class: 2 Laser type: 650 nm; < 1 mW Laser spot diameter (at distance): 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & light conditions Operation User interface: Control panel with soft-touch keys and LED lighting/Display of battery capacity/status and error indicators Data exchange Flash memory: 32 GB, USB and WiFi Range: 50 m (depending on environment) Power supply Power adapter: 14.8 V, 1.2 A, with a cut-off voltage of 16.8 V, primary voltage 100 V – 240 V, 19.5 VA, 50/60 Hz Battery: operating range between 11.2 V and 16.8 V Runtime: Up to 11.5 hours, depending on use of LED lighting; approx. 8 hours under typical use Environmental Conditions Operating temperature: operation and battery charging: +0° to +40° C Storage temperature: -20° to +50° C Dust and moisture: IP 40 Special Features · Hot Swap: the replaceable battery can be exchanged during operation in just seconds · Integrated lighting assists in poor lighting conditions · Mobility: Lightweight (approx. 4.7 kg) combined with a foldable tripod makes the HottScan HS-1 a compact tool for on-site inspection and maintenance jobs Your Advantages · Mobility (light weight) and long battery life · Avoidance of multiple on-site visits · Battery change within seconds · Free loan device in case of servicing from the 3rd business day Includes HottScan Room Modeler full version Software for generating a 3D room model from scanner data, export of quantity data in CSV format, geometry export in DWG/DXF format with layer structure, and Collada format Performance scope · Simple room modeling from first-person perspective · Export of quantity data in CSV format · Geometry export: DWG/DXF format with layer structure and Collada format with textures; continual post-processing possible in all 3D CAD programs Includes transport case for HottScan 3D room scanner · Weather-, corrosion- and temperature-resistant aluminum sheet · Lid and bottom profiles welded at the seam · 2 stainless steel hinges · 2 lever-lock clasps · Continuous rubber seal providing dust and splash water protection · Temperature resistance from -40°C to +80°C Interior · Egg-crate foam in the lid · Foam insert in the base with product-shaped cut-outs Availability: Short notice Location: Flörsheim

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 THE ADVANTAGES 4 workstations on one machine 80, 300, and 1000 mm radii Nwedekwhwlopfx Aa Ish Straight and curved grinding back panel 150 mm belt height Pneumatic belt tension Continuously variable pneumatic unit oscillation Solid cast iron unit – ensures consistently good grinding results Dust extraction around the entire work table Only the highest quality components Because we are confident in our products – 5-year warranty Each machine is handcrafted in our hometown (Rehnen) Lifetime spare parts supply GS & BG dust tested Motor power: 4 KW Grinding belt size: 150 x 2700 mm Grinding belt speed: 15 m/sec Table size: 345 x 2000 mm Space requirement: 2000 x 3000 mm Weight: 560 kg Dust extraction diameter: 140 mm Availability: short-term Location: Hochheim

Condition: used, mileage: 25,000 km, power: 81 kW (110.13 HP), first registration: 01/2022, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 02/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Remote control, heated exterior mirrors, heated driver's seat, ladder rack, first owner, complete service history, very clean, nationwide delivery 296 EUR + VAT, tow hitch incl. installation 790 EUR + VAT. Test drive and warranty available upon request, No.: 657 Nodszhc I Rjpfx Aa Iewh Opening hours: Mon-Fri 8:00 a.m. - 12:00 p.m. and 1:30 p.m. - 5:00 p.m., Saturdays from 9:00 a.m. - 11:30 a.m. More vehicles available at:

Condition: used, mileage: 162,705 km, power: 93 kW (126.44 HP), first registration: 09/2014, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2026, color: blue, gearing type: mechanical, emission class: euro5, number of seats: 7, total length: 6,635 mm, total width: 2,130 mm, total height: 2,360 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Iveco Daily 35S13 Pickup with flatbed, first owner, 162,000 km, well-maintained with service records, Iveco, 162,000 km. Slight engine noise from the valve train, possibly caused by rattling hydraulic tappets. Nodpfx Aaezf Tqqj Iowh EQUIPMENT: Standard equipment: Airbag, driver's side; Drive type: rear-wheel drive; Design: S-series; Brake assistant; Electronic stability program (ESP); Anti-lock braking system (ABS); Traction control system (ASR); Rear axle suspension: parabolic; Front axle suspension: leaf spring; Electric windows; Tinted windshield and side windows; Generator 120 A; Gearbox: 5-speed; Body/superstructure: flatbed, double cab, standard; Fuel filler neck in B-pillar (for standard cab); Fuel tank: 70 liters; Engine: 2.3 liters - 93 kW Diesel; Radio preparation with speakers; Wheelbase: 3750 mm; Low emissions according to exhaust standard Euro 5; Headlights: H4; Power steering; Seats in the cab: passenger double seat with headrests; Daytime running lights; Underrun protection on the side; Immobilizer; Central locking with remote control; Permissible total weight: 3.50 t. Special equipment: Trailer coupling: ball head on the trailer hitch; Trailer socket 13-pin; Audio system: radio with CD player; Exterior mirrors, electrically adjustable and heated; Tachograph; Digital tachograph; Long material carrier with cab protection for pickup trucks; Seat cover/upholstery: artificial leather, etc. Appointments and test drives by telephone arrangement. The information provided on the Internet is a non-binding description. It does not constitute a guarantee of characteristics. The seller is not liable for typing and data transmission errors. Errors and prior sale are subject to change.

Condition: used, High-speed milling spindle, HENNINGER Type 814 / 5131 / 1:5 / 15000 Maximum speed: 15,000 rpm at 70% duty cycle Gear ratio: 1:5 Power transmission: up to approx. 2.5 kW Overhang: 110 mm (machine spindle to clamping nut) Tool holder: MK4 with M16 draw-in thread Collets, Type OZ16, Ø: 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm Weight: 6.5 kg Good condition. Nwjdpsf Axn Uofx Aa Ijh

Condition: used, axle configuration: 3 axles, first registration: 10/2007, color: other, Year of construction: 2007, Empty weight: 6.740 kg Axle 1: left 10 mm right 10 mm Nwjdpfx Aajyvf Dfs Ioh Axle 2: left 12 mm right 12 mm Axle 3: left 10mm right 10 mm

Condition: used, axle configuration: 3 axles, first registration: 02/2018, color: other, Year of construction: 2018, Empty weight: 6.470 kg Nsdpfeym Aw Djx Aa Iswh Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm