Used Sinmag Hydraulic Dough Divider for sale (17,845)

Condition: used, Indexing head with tailstock DECKEL Center height: 100 mm Gear ratio: 40:1 Spindle bore: 26 mm - 3-jaw chuck FORKARDT, Type F 160 with one set of step jaws Nwsdpfx Aoxcbp Nsgrjl - Crank handle with index plate and sector arms - Swiveling crank handle with index plate for direct dividing - 1 index plate with hole numbers: 36, 37, 40, 58 - 24-step index position (15° increments), graduated scale on the main spindle - Tailstock center with dovetail guide - Complete indexing head rotatable and tiltable on base plate Dimensions (L x W x H): 600 x 400 x 270 mm Net weight: 67 kg Indexing head in need of repair: - Key strip for dovetail guide is missing - Lever for index positioning is broken - Swivel mechanism is stiff

Condition: used, Hydraulic power unit with piston pump PUMPEN WART in Erkrath High-pressure pump, high-pressure hydraulic unit (in need of repair) Type SJK2C Serial No. 48315, Order No. 230045 Year of manufacture: approx. 1975 Pressure capacity: 1000 bar (according to nameplate) Flow rate: 25 liters/min (according to nameplate) Flow rate: 25 liters/min (at 0 bar) Flow rate: approx. 3 liters/min (at 1000 bar) Piston pump with 2 pistons, 50 mm stroke 280 double strokes per minute Tank capacity: approx. 100 liters Nwodpfjxcimpsx Agrel Motor power: approx. 11 kW Power connection: 380 volts, 50 Hz Required space (L x W x H): 1000 x 600 x 1200 mm Weight: approx. 350 kg No proper function during test run, although the unit was last used on a test bench. Possible issues due to extended downtime and storage period. Sale without functional guarantee, without technical demonstration, at a special price.

Condition: used, Hydraulic Cylinder, Double-Acting Piston diameter: approx. 160 mm Piston rod diameter: 100 mm Cylinder stroke: approx. 170 mm Operating pressure: approx. 300 bar Compression force at 300 bar = 60 metric tons - Thread on piston rod Nwsdpjxcivdofx Agrol - Spherical rod end on cylinder for pin Ø 90 mm Retracted installation length: 850 mm Net weight: 200 kg Cylinder was used for test purposes and is in as-new condition.

Condition: used, axle configuration: 3 axles, first registration: 09/2016, total length: 13,680 mm, total width: 2,550 mm, suspension: air, tire size: 235/75R17.5, wheelbase: 9,500 mm, color: blue, Year of construction: 2016, Equipment: ABS, Total loading floor length, from front to ramp: 950 cm. Flat loading floor length: 810 cm. Internal height: 309 cm. Length from front: 370 cm. Height from front to roof: 261 cm. Sliding roof / Edscha roof. Nsdpfx Agezk H Uyorewl = Further information = Axle configuration Tire size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Double tires; tire tread depth left inner: 50%; tire tread depth left outer: 50%; tire tread depth right inner: 50%; tire tread depth right outer: 50% Rear axle 2: Double tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 50%; tire tread depth right outer: 50% Rear axle 3: Double tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 70%; tire tread depth right outer: 70% Weights Unladen weight: 9,200 kg Payload: 38,800 kg GVW: 48,000 kg Identification Model number: HYDRAULIC RAMP / FORK LIFT - MAC = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: good (used), Zmatik Sf500L rolling mill. The machine was in operation until recently. The belt needs to be replaced. Nwsdpfjxm Rmrjx Agrel

Year of construction: 2010, condition: used, machine/vehicle number: INS5, Technical Specifications & Performance Data This Divider Inserter by OMA is engineered for reliable insertion of cardboard partitions into cases at high efficiency. Built in 2010, it offers robust performance for industrial packaging and beverage production, making it a strong addition to any used bottling line or second hand packaging setup seeking improved product protection during transport. Manufacturer: OMA Model: INS ALV Year: 2010 Production speed: approximately 1200 cases/hour Case formats: 6-bottle and 12-bottle cases Head configuration: single-head Included equipment: vibratory belt/conveyor for partition handling Electrical supply: 230 V, 50 Hz Installed power: 1 kW Weight: 1000 kg Marking: CE Advanced Automation & Control Systems The machine is equipped with a dual-sided control interface, featuring a redundant keypad on both sides of the frame to improve operability and access for line personnel. This layout streamlines adjustments, format changes, and maintenance tasks, enabling safer and more efficient operation. The single-head design supports consistent partition placement with reduced complexity and quick routine checks. Production Line Integration Capabilities Designed for seamless integration within industrial packaging lines, this Divider Inserter can operate inline with case erectors, bottle/case packers, and case sealers. It suits both retrofit projects and new installations in beverage production environments. Format compatibility includes 6- and 12-bottle case patterns, with straightforward changeover procedures supported by the dual-sided controls. The unit handles corrugated carton cases and cardboard dividers commonly used to protect bottles during logistics, making it a practical fit for bottling equipment and broader packaging machinery layouts. Machine Condition & Maintenance History The machine is currently in production and available for testing. Its ongoing operation demonstrates maintained performance and readiness for integration into a working used bottling line or industrial packaging line with minimal commissioning time. Operational Performance & Versatility With a throughput of approximately 1200 cases per hour, the OMA INS ALV supports mid-speed lines requiring dependable partition insertion to minimize bottle-to-bottle contact. The included vibratory belt ensures smooth partition feeding and orientation, enhancing process stability and reducing jams. The single-head configuration prioritizes accuracy and mechanical simplicity, which translates into consistent results and lower routine service requirements. Installation Requirements & Site Preparation The unit operates on a standard 230 V, 50 Hz electrical supply with a modest installed power of 1 kW, supporting energy-efficient operation. Its 1000 kg construction delivers stability during high-duty cycles while remaining compact enough for typical packaging hall layouts. The machine’s footprint is well-suited for integration along existing conveyor systems upstream of case sealing and downstream of case packing. Nsdpfsyh E Avsx Agrjwl Safety Standard...

Condition: good (used), functionality: fully functional, Year of construction: 2014, Equipment: hydraulics, quick-change device, We are selling a "POWERTILT" from the leading manufacturer BERGAUER, with HKS rotary actuator BVC 250, with 2 bolts, d=70mm, and HYDRAULIC quick coupler Verachtert CW 30! Suitable for various excavators and CW20, CW30, and CW40 buckets (560mm clear distance between the "hooks"). Manufacturer: BERGAUER (very good quality manufacturer!) Bucket and coupling mounting: 70mm bolts For bucket shank width of 300mm The tilt coupler has seen little use and is in very good condition. Construction made of HARDOX. Bushings and bolts are in top condition, see photos. Nwedpsyzncpefx Agrel Sale is made excluding any warranty or guarantee. Sale only to dealers or commercial customers. The price is €7,500.00 NET plus 19% VAT. New price: €15,000.00 net. Collection in Bad Staffelstein or transport to you for an extra charge (we will gladly calculate transport costs if you provide the destination). We also have a package of excavator buckets and a sorting grapple with a Verachtert quick coupler for sale; check out our other offers!

Condition: new, Year of construction: 2024, neu 2024 7307 prompt, Zwischenverkauf v Italien 11400 € 197.76 € 1 10300 € 100 to horizontal verschiebbar 500 mm 900 mm 1050 mm 25 mm/s 2 mm/s 2 kW 1900 mm 1000 mm Njdswiqu Dspfx Agrjwl 2400 mm 1250 kg 650 mm STROKE 500 MM 2 speeds machine table can be liftet with chains control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH

Condition: ready for operation (used), Engine: CAT 3054 DI-T(EPA), power/speed: 78.5kW(107hp)/2300rpm, max. power: 80.5kW (110hp), diesel tank capacity: 160l. Hydraulic system: Hydraulic pumps: 1) circuit: 92l/min, 2) circuit: 73.6l/min, 3) circuit: 18.4l/min, 4) circuit: 8l/min, system pressure: 250bar, hydraulic tank capacity: 350l. Crawler chassis: type: B1, tractive force: 75kN, travel speed: 2.2km/h, specific ground pressure: 5.3N/cm², total width: 2200mm, length of crawler tracks: 1900mm, ground clearance: 390mm, oscillation possibility: +18°/-8°. Drilling equipment: permissible torque: 20kNm, total length: 5765mm, feed length: 4300mm, max. boom length: 4000mm, feed force: 40kN, retraction force: 60kN, feed speed: 9m/min, retraction speed: 9m/min, fast feed: 47m/min, fast retraction: 47m/min. Transport dimensions X/Y/Z: 6470mm/2200mm/2560mm, weight: 8500kg. Documentation available. Nwsdpotpp Ifefx Agrjl

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Nedpfxjyxgr Ro Agrjwl

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Nsdpoya Hwzjfx Agrewl

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Nwedpfxjyq R D Hs Agrjl

Condition: used, Year of construction: 2021, Load capacity: 4.5t, shaft diameter: 68mm, max. hydraulic pressure: 370bar, rotator flow rate: approx. 25-40l/min, torque: 850Nm, bending moment: 3000Nm. An on-site inspection is possible. Nwsdpoz Da R Eefx Agrel

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Nsdoy U Nqbspfx Agrjwl

Year of construction: 1959, condition: used, The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible. Nwodozv T Iwopfx Agrel

Year of construction: 1992, condition: used, Pressing force 40 t Effective stroke 500 mm power capacity 17 kW tracking travel 48 mm Overrun time 110 ms safety distance 176 mm Condition: used Nedpfxezdvcaj Agrjwl Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2024, tank capacity / l working pressure / bar feed pressure / bar Nwsdpfx Agoyn R Sxjrel weight / kg required space 1,72 x 1,00 x 1,81 m HYDAC hydraulic unit CA2R05H07.4-155-03-20X+3055404+G24-XXX Condition: As new

Condition: new, functionality: fully functional, load capacity: 45,000 kg, total length: 9,000 mm, Hydraulics Condition: New unit Technical condition: New Nsdpfx Ageyyfl Esrswl Description: Extension cylinder for Linde Reachstacker series 357 C4230TL5 - C4535TL5

Condition: used, Year of construction: 2008, Manufacturer: Fritz Müller Machine type: Hydraulic drawing press Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 General overhaul: 2008 Total drawing force, press ram: 1,000 – 12,000 kN Drawing force: 7,000 kN Holding force per cylinder: 200 – 1,250 kN Ram surface area: 3,500 × 2,200 mm Max. ram stroke: 1,330 mm Max. drawing depth: 430 mm Distance, table – holding cylinder, top dead center: 2,700 mm Distance, table – holding cylinder, bottom dead center: 1,420 mm Distance, table – ram, top dead center: 2,500 mm Distance, table – ram, bottom dead center: 1,200 / 1,600 mm Hydraulic table cushion, one-piece: Nsdpfx Aoy Ndz Rsgrjwl Displacement force: 800 – 2,500 kN Stroke: 0 – 300 mm Cushion surface area: 2,700 × 1,200 mm Table clamping surface: 3,500 × 2,200 mm Clear width between guides: 3,550 mm Max. tool weight: 32 t Max. plate width: 2,200 mm Max. plate length: 1,600 mm Sheet metal thickness: 0.5 – 2.5 mm Feeding height above table: 650 – 900 mm Max. single part weight: 40 kg Max. stack height: 450 mm Max. weight per plate stack: 4.5 t Single or double plate feeding possible Electronic double sheet control available Rapid descent speed: max. 500 mm/s, unregulated Working speed: 30 – 115 mm/s Return speed: 30 – 600 mm/s Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: used, power capacity 1,5 kW working pressure / bar pump capacity / l/min Make: AC motors Type: FCA 0L-4 Nsdpfx Agezcgg Ierswl Power: 1.5kW - 1.8kW Rotation: 1400 rpm - 1680 rpm Tank volume: approx. 14 liters

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WE OFFER AN BEAUTIFULL CONDITION DEEP DRAWN PRESS 160 TON WITH BACK FORCE BOTTOM 70 TON MACHINE WAS BUILD ON ORDER MACHINE WAS USED ONLY A COUPLE TIMES PER YEAR FOR SOME SMALL PARTS. CONDITION IS EXCELLENT . NEWER RUN A PRODUCTION. WE CAN ALSO DELIVER MACHINE FOR A CUSTOMER TABLE SIZE: 1030 X 630 OPEN GAP: 740 MM TOTAL WEIGHT APPROX 8000KG DIMENSION 1500 X 1500 X 4000 Nwedpevxbn Uefx Agrjl

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, WE OFFER AN VERY NICE DUNKES PRESS Nwjdovldx Nspfx Agrjl MACHINE IS READY FOR OPERATION.

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Technical Data: - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm Nwjdpfx Aexuhzcjgrsl - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: excellent (used), Year of construction: 2017, Motor from Lammers Antriebstechnik 11kW, 1470/min Nsdpfxsrm Nhlj Agrowl Valves: HYDAC Pump 30 cm³/rev Tank 250 liters Pressure 100 bar max Oil HLP 46

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works Nwsdpsi Amnpjfx Agrjl - available for immediate delivery -