Used Solenoid Valve 3/2 for sale (103,486)

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. Nwedpfx Aoyug R Rjdrji The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: good (used), mileage: 815,045 km, power: 279 kW (379.33 HP), first registration: 04/2006, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 6,980 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel-air, total length: 10,800 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2006, Volvo FM380 6x2 – 2/3 Berdex Livestock Stock – 54m³ – Weighbridge – I-Shift Transmission Date of Manufacture: 25-04-2006 Mileage: 815,045 km VIN: YV2JN50CX6A611773 Registration: BR-XX-33 APK/TÜV valid until: 13-05-2026 3-deck Berdex livestock box Tail lift with weighing system I-Shift automatic transmission Original Dutch truck = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,130 cc Nsdpfx Adoy D Adgjrewi Transmission Gearbox: I-Shift, 12-speed, automatic Axle Configuration Front axle: Tyres: 385/65R22.5; Max. axle load: 8,000 kg; Left tire tread: 70%; Right tire tread: 70%; Suspension: leaf springs Rear axle 1: Tyres: 295/80R22.5; Twin tires; Max. axle load: 11,500 kg; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70%; Suspension: air suspension Rear axle 2: Tyres: 385/65R22.5; Lifting axle; Max. axle load: 7,500 kg; Left tread: 60%; Right tread: 60%; Suspension: air suspension Weights Unladen weight: 14,576 kg Payload: 12,424 kg Gross vehicle weight: 27,000 kg Bodywork Body make: Volvo Condition Technical condition: good Visual condition: good Identification Registration no.: BR-XX-33 Further Information Please contact VAEX The Truck Traders for more information.

Condition: excellent (used), mileage: 508,877 km, power: 110 kW (149.56 HP), first registration: 09/1991, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, Year of construction: 1991, Tail lift: Yes WVML044053G070621 = More information = Empty weight: 5.260 kg Carrying capacity: 5.140 kg GVW: 10.400 kg Technical condition: very good Visual appearance: very good Registration number: 1WBE674 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Nodpfjymrvpsx Adrjwi Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2009, total length: 13,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65/22.5, wheelbase: 9,000 mm, color: white, Year of construction: 2009, Equipment: ABS, = Additional options and accessories = - Disc brakes = Further information = Axle configuration Nwjdpfjy Dftwox Adrji Tyre size: 385/65/22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 10%; Tyre tread right: 10% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Weights Unladen weight: 7,596 kg Payload: 31,404 kg Gross vehicle weight: 39,000 kg Condition Technical condition: very good Visual condition: very good Further information Please contact Bas Wolfs or Bas Wolfs for more information.

Condition: used, Year of construction: 2009, Used overhauled filling triblock ALFATEK Elvira 16-20-3 year 2009 Initially, the ALFATEK Elvira 16-20-3 filling triblock, created in 2009, stands as a benchmark of engineering excellence for bottling in glass containers. 1. Model Description and Operational Capability Configured for an impressive throughput of 4,000 bottles per hour (BPH), it specifically targets handling 0.75-liter glass containers. Furthermore, the Filling Triblock Alfatek Elvira integrates three main operational modules: the rinser, the filler, and the capper. Each module is meticulously tailored for a distinct phase of the bottling process, ensuring a streamlined operation. 2. Rinsing Unit of the Filling triblock Alfatek Elvira The Filling Triblock Alfatek Elvira is equipped with 16 grippers, the rinsing system ensures containers are thoroughly cleaned before filling. Consequently, the gripping mechanism is ingeniously designed to handle glass containers with the utmost care, thereby preventing any potential damage. 3. Filling Mechanism Moreover, the filling segment incorporates 20 valves, operating on a high vacuum principle to achieve precise filling. This method not only ensures uniform fill levels across all containers but also allows for efficient dispensing of liquids of varying viscosities, thanks to the selection of fixed nozzles. 4. Capping System Subsequently, the capping unit, fitted with three heads, is adept at applying aluminum screw caps with unparalleled precision. It demonstrates the exceptional versatility of the Filling Triblock Alfatek Elvira in handling various cap types, thus ensuring a consistent secure seal consistently. 5. Safety Measures and Maintenance Protocols Additionally, the Filling Triblock Alfatek Elvira adheres to stringent industrial safety standards, featuring comprehensive protective measures for operator safety. Presently stored under optimal conditions, it is accompanied by a complete set of maintenance manuals. This pivotal aspect is crucial for maintaining the machine’s operational efficiency and extending its longevity. 6. Electrical Specifications and Mechanical Design Nwedpfxovgt H Eo Adrsi Requiring an electrical supply of 380 V at 50 Hz is perfectly aligned with standard industrial requirements. Moreover, its clockwise rotational movement is thoughtfully designed for seamless integration into existing production setups, thereby facilitating effortless adoption. 7. Conclusion of the Filling Triblock Alfatek Elvira In conclusion, the ALFATEK Elvira 16-20-3 triblock from 2009 epitomizes advanced engineering, effectively optimizing rinsing, filling, and capping operations in bottling processes. Its technical configuration renders it ideally suited for robust application within the bottling industry, achieving high marks for operational efficiency, precision, and reliability. The meticulous design assures compatibility with a broad range of bottling requirements, securely positioning it as a valuable asset in production environments. Ultimately, the incorporation of transition words aims to enhance the flow and coherence of the analysis, ensuring a comprehensive understanding of the machine’s capabilities.

Condition: excellent (used), axle configuration: 3 axles, first registration: 11/2011, tire size: 385/55/22.5, Year of construction: 2011, Lifting roof Nwsdpfsyxw A Tex Adrji Separate floor/two-cylinder system Independent operation Remote control = Further information = Tyre size: 385/55/22.5 Rear axle 1: Steered; Tyre tread left: 65%; Tyre tread right: 65% Rear axle 2: Tyre tread left: 65%; Tyre tread right: 65% Unladen weight: 10,800 kg Technical condition: very good Visual condition: very good

Condition: like new (used), Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 1,250 m/min, rapid traverse Y-axis: 620 m/min, rapid traverse Z-axis: 620 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain iTCN530, workpiece weight (max.): 1,000 kg, rotational speed (min.): 15,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Nwedpoyybpmjfx Adrei Weight kg: 8.000

Condition: like new (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, Including control panel, control PC, and software as shown in the pictures. EXW – self-collection on site. The purchasing company must sign a sales contract and disclose/confirm its beneficial owners. Furthermore, the signatory must complete a Postident identification. Nsdpfx Adoyam S Sjrewi

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8328, Offer Number: M08L/8328 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: RH60 Constr. year: 1988 Njdpfjwi S Aiox Adrjwi diameter range: 8,5 mm number of dies: 2 number of stations: 4 cutting length: 55 mm shaft length under head: 55 mm output - pieces/min: 200 press power: 30 to Location: In our warehouse

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8001, Offer Number: M08L/8001 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO in 2nd and 3rd Make: ASAHI OKUMA Type: ORH120 Constr. year: 1988 diameter range: 14 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 100 mm shaft length under head: 90 mm output - pieces/min: 100 Nodpfowi S Raex Adrjwi press power: 120 to Location: In our warehouse

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: M08L/8327, Offer Number: M08L/8327 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: RH60 Constr. year: 1989 diameter range: 3-8,5 mm number of dies: 2 number of stations: 4 cutting length: 55 mm Nwjdjwi S Apspfx Adroi shaft length under head: 55 mm output - pieces/min: 200 press power: 30 to Location: In our warehouse

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M08L/7162, Offer Number: M08L/7162 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off Make: HILGELAND Type: CF5AZ Constr. year: 1979 Nodpfxewi Tavs Adrswi diameter range: 8-16 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 160 mm shaft length under head: 130 mm output - pieces/min: 100 Location: In our warehouse

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M08L/8922, Offer Number: M08L/8922 Machinetype: 2 die - 3 blow transfer header Info: PKO , Stripper , Variable speed Make: NAKASHIMADA Type: PF860 Constr. year: 1985 diameter range: 8 (9,5) mm number of dies: 2 number of stations (incl. cut off): 4 max. cut-off length: 80 mm shaft length under head: 60 mm Njdpfswi Tflsx Adrswi output - pieces/min: 50-120 press power: 70 to Location: In our warehouse

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M08E/9110, Offer Number: M08E/9110 Machinetype: 2 die - 3 blow transfer header Make: NAKASHIMADA Type: NP80 Constr. year: 1992 diameter range: 10 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 100 mm shaft length under head: 80 mm output - pieces/min: 150 Nwjdpfxeyya Rps Adrsi press power: 60 t Location: Europe

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: M08L/8464, Offer Number: M08L/8464 Machinetype: 2 die - 3 blow transfer header Info: PKO Njdpfx Adswi Sz Eorewi Make: OMEGA Type: 123G Constr. year: 1995 diameter range: 3-8,5mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 60 mm shaft length under head: 55 mm output - pieces/min: 250 Location: In our warehouse

Condition: used, Used Cuccolini model VPM900 2/X stainless steel 3-deck screen. Screen measures approximately 900mm diameter. Unit has 0.73Kw, 1440rpm BOMEC vibrator motor. Weight: Estimated: Kg200.0 Dimensions: 1100mm X 1100mm Equipped With: Fitted with 300 micron & 500 micron ball tray screens. Can also include spare 710micron ball tray screen. Njdeygvncopfx Adrswi

Year of construction: 2004, condition: excellent (used), GRAEWE - SANDERN 2 CHAMBERS UNDERWATER VACUUM CALIBRATION TANK V-32-2-3, 3 meters long Nedpfx Aeyc E Nnsdrjwi 2-chamber tank with 2 bypass filters Year of manufacture 2004 Without spraying / Full immersion calibration tank Electric feed, forward and reverse

Condition: good (used), Year of construction: 1956, machine/vehicle number: 5866, POLYGRAPH thread sewing machine 39 3/4 /2, machine number 5866, working width 39 cm, year of manufacture 1956, in good condition, immediately available. If interested, we will also be happy to inform you about other machines in our inventory. Nodpfx Aoxbzgxjdrswi You are welcome to inspect the machine at our premises by prior appointment.

Condition: used, Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen. Nedpfxoyi Ex Ne Adrowi

Condition: good (used), Year of construction: 2004, Machine is good working condition. Nwedeyufn Iepfx Adrji Control unit Heidenhain TNC 530 Parts shown by hand not come.

Condition: good (used), Year of construction: 2023, machine/vehicle number: 11141057, Offer 25033 Technical data: - Total lifting capacity: 1,600 kg - Lifting capacity per chain strand: 800 kg - Lifting height – chain travel approx.: 8 m - 2 lifting speeds: 3.0 / 12.0 m/min - Drive: 400 V - Weight approx.: 160 kg Nwsdpfx Adswwiwaerji - Space requirements without chain box approx.: W 650 x H 350 x D 650 mm - Space requirements with chain box approx.: W 650 x H 850 x D 650 mm - Handheld remote control - 1 piece separate redirect support for the second chain strand - 1 piece load pick-up with threaded rod

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU immediately available ex works Nwedpfxsfifbbs Adrei Freight costs on request

Condition: good (used), Gathering machine POLIGRAPH 39 3/4 -2, manufactured in 1955, machine number 5743, in good condition, immediately available. Nwodpfxjhawuyo Adrei

Condition: new, incl. continuous 150 cm ramp / Low loading height / Lashing eyes in floor Technical Data: • Brand: Martz • Model: BAU-3 260/2 S 2.7T • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/Main inspection: 2 years from first registration Nwjdpfx Adox Tbkkjrji • Internal dimensions (LxWxH): 260 x 150 x 25 cm • External dimensions (LxWxH): 460 x 210 x 164 cm • Loading height (floor): 34 cm • Permissible gross weight: 2,700 kg • Unladen weight: 522 kg • Payload: 2,178 kg • Chassis: Low loader (wheels next to the platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, retrofittable DESCRIPTION • Robust, walk-on steel mudguards with continuous safety anti-slip strips • Phenolic resin coated plywood floor, anti-slip and waterproof • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Steel loading ramp mounted on shaft • Strong eccentric locks • Insertion points at all 4 corners for tarpaulin frame, mesh attachment, drop side extensions or front wall extension • Robust support legs at the ramp • Lift assistance for ramp • Extra low chassis for shallow ramp angle • With bucket rest • 8x recessed lashing eyes in side frame profile (600dAN/kg), TÜV certified • Maintenance-free KNOTT rubber torsion axles • Reverse-automatics • KNOTT overrun mechanism and parking brake • Very stable, bolted reinforced V-drawbar • 13-pin plug • Reversing light • Large, high-visibility safety lighting • Lane marker lights at rear • Integrated rear fog light • Rear frame lighting recessed • Automatic jockey wheel centrally mounted Optional accessories (on request): • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Toolbox • Reversing light • Lashing straps • and much more. New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document shipping possible in advance or temporary license plates (Germany) can be provided - Export license plates including customs declaration available Descriptions and images are copyright protected!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been specialized dealers & repair workshop for Brian James / Blyss / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, changes and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Including continuous ramp 150 cm / Low loading height / Floor-mounted lashing eyes Technical Data: • Brand: Martz • Model: BAU-3 300/2 S • Vehicle type: Construction machine trailer • Vehicle condition: New vehicle • First registration: None • MOT/Technical Inspection: 2 years from first registration • Internal dimensions (LxWxH): 298 x 153 x 25 cm • External dimensions (LxWxH): 499 x 211 x 162 cm • Loading height (floor): 34 cm • Permissible gross weight: 2,700 kg • Unladen weight: 545 kg • Payload: 2,155 kg • Chassis: Low loader (wheels beside the platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, retrofittable DESCRIPTION • Robust, walkable steel mudguards • Grating step boards at rear on both sides • Phenolic plywood floor, continuous jointless, anti-slip, and waterproof • Very stable welded steel frame • Frame fully hot-dip galvanized • Steel ramp, upright on shaft, 164 cm • Heavy-duty eccentric locks • Corner posts with tool-free removable locks for rear panel • Insertion points in all 4 corners for tarpaulin fittings, mesh sides, sidewall extensions, or front wall extension • Robust support feet at the ramp • Ramp lifting aid • Very low chassis for shallow approach angle • With bucket support • 10x recessed lashing rings in the side frame profile (1000daN/kg) TÜV certified • Three-sided perforated rail (Combi Protect Rail), can also be used with load bars and lashing straps – round holes 25 mm, elongated holes 54x25 mm • Maintenance-free rubber torsion axles by BPW/AL-KO • Automatic reverse function • BPW/AL-KO overrun brake and parking brake • Very stable bolted V-drawbar REINFORCED • 13-pin connector • Reversing lights • Large safety lighting system • Directional tail lamps • Integrated rear fog light • Lighting recessed in rear frame • Centrally positioned automatic jockey wheel Optional retrofittable accessories – please inquire: • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Tool box • Reversing lights • Lashing straps • ...and much more Nodpfx Adsx Tbkwsrjwi New vehicle with warranty and MOT. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration certificate can be sent in advance or transit plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! For more than 30 years, we have been specialist dealers and repair workshop for Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberte, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix, and many more brands. - Errors, omissions, and prior sale excepted -