Used Spinner U5-2520 for sale (460)

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 13R22.5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2026, Equipment: air conditioning, cruise control, trailer coupling, = Additional options and accessories = - Immobiliser - Sun visor = Remarks = Hodey Tyfyspfx Algsu Cabin type: Active Time - Sleeper Country of origin: SPAIN Displacement: 12,900cc Dimension: 9,100 x 2,550 x 3,100 Brakes: Disc Brakes (Front/Rear) Steering: LH Drive Construction: Chassis Type: AT380T47H - SG64 Chassis Length: 6.56m Shipping Dimension: L 9.1 x W 2.55 x H 3.1m Capacity Liters: 290L Rear Axle: HR-TP Colour: 50105- White IC 194 Rear Overhang 1990mm FMS Data Interface Rear Multi Leaf spring 13 leaps Front Reinforced parabolic suspension Load 9000-32000 Rear Axle Ratio 4.67 Drive Tire 325/95R24 Electronic Brake System + Brake Assist System Safety Hor. Filter Cartridge Horizontal Air Filter 630cc air compressor Standard air tank plating Steel Air tanks 90A alternator Air processing unit free discharge Horizontal battery positioned on side frame Standar Grey Plastic Part Mechanical Cab Suspension At low roof cab Roof in standard color Standard reverse STD temp climate Fabric air susp driver seat Lower Exhaust Pipe Engine Speed 1900 RPM Steel front bumper Front Anti Roll Bar Rear Anti Roll Bar Logistic Mode Off Bulb Rear Light Mechanical Battery Switch Fabric sta 2 way Adj pass PTO pre-equipment Expansion Module Engine Plate Radiator Guard Provision Radio and CB Cross member D 120 KN Revere Monotone Buzzer Steel Wheels Grey IC44 Chassis Standard Equipment MPH/KPH Speedometer Soft Touch Steering wheel Pre Heater Tyre Inflation Hose VIN Code check digit Warning Triangle Radice VIN WJM STD setting c11/c13 1 bunk without protection net Pre filter high performance transparent ZF 16S 2520 TO GBOX Standard H Lamps Electronic Horn Plates in ECC Language Jacking Equipment = More information = Tyre size: 13R22.5 Suspension: leaf suspension GVW: 41.000 kg

Year of construction: 2021, condition: used, functionality: fully functional, This is a Hobart Premax AUPT-10B double-basket hood-type dishwasher, manufactured in 2021. It includes a matching supply and drain table. First commissioning: 07/11/2023 / Operating hours: 1450 / Washing cycles: 30008 This premium double-basket hood-type dishwasher offers double the capacity for simultaneously washing two baskets. The PERMANENT-CLEAN dirt removal system removes coarse dirt into an external filter. This saves operating costs and protects the machine. To ensure that hygienic final rinse temperatures are reached even when connected to a cold water supply, the machine has an automatic program time extension. For corner installations, we recommend that the right side of the machine is accessible for maintenance. We recommend water treatment for water hardness of 1°dH or higher. The machine has undergone a thorough inspection in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. The original list price of the machine with this equipment at the time of purchase was: €37,570.00 (gross). Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 1345 x 915 x 1510 mm (+200 mm PERMANENT CLEAN system) Supply/drain table each 1200 mm Height with hood open: approx. 1995 mm Power connection: V: 400 / kW: 22.5 / A: 36.1 / Hz: 50 Weight: 252 Serial number: 867206655 Year of manufacture: 2021 Condition: used, major inspection carried out, fully functional. Further information: Basket size: 500 x 500 mm Tank capacity approx. 80 liters Water consumption approx. 1.4 L/basket Insertion height 440 mm Capacity up to max. 140 baskets/h, 2520 plates/h, 5040 glasses/h 8 automatic programs: Short, Standard, Intensive, Eco, Continuous wash, Cutlery, Hygiene and Heavy-duty programs. Program duration: 52/70/170/180 sec. and special programs Heat and sound insulated hood Multi-setting: The heating capacity can be reduced on-site from 12.4 kW to 6.2 kW when connected to a hot water supply. Self-cleaning program Filter contamination sensor USB interface for exporting operating and hygiene data Completely ready for connection: Supply and drain hoses, connection cable, liquid detergent dosing pump, rinse aid dosing pump, rinse pump, drain pump, backflow preventer Hood, tank, frame, wash arms and housing made of CrNi steel 1.4301 4 plate baskets P-18-12, 1 universal basket C-01-07 Subject to changes and errors. Hjdszmttuepfx Algsu Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 09:00 to 13:00 and from 14:00 to 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: new, fuel type: diesel, fuel: diesel, Equipment: air conditioning, airbag, central locking, differential lock, parking heater, trailer coupling, From our product range, we offer you: Equipment vehicle logistics GW-L2, all-wheel drive, on a rugged MAN TGM 13.290 chassis. A vehicle for many tasks. Equally suitable for severe weather operations as it is for establishing a water supply over long distances, even in difficult terrain during forest and vegetation fires. As a modular replacement for rescue and equipment vehicles or with water tanks for transporting firefighting water. Or... ...just right for your needs! Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 hp (213 kW) with automatic transmission • Same-track single tires for high off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire engine red) • Cab with auxiliary heater Superstructure: • High-quality superstructure made of rust and corrosion-resistant material • Two spacious side equipment compartments • Fold-out steps for each side equipment compartment • Individually customized equipment storage systems made of stainless steel to your specifications Tail lift: • BÄR tail lift BC2000 • Aluminum platform Bär BC2000 S4-C4 • Platform dimensions 1810 mm x 2520 mm (height/length x width) • 2-button foot control • 2-fold roll-off safety • LED platform lights Safety and Lighting • LED mini light bar on the vehicle roof / 2 LED front flashers • Pneumatic special signal system MARTIN-HORN • Rearview camera Hsdpfx Aljzmy Apsgju • Comprehensive LED lighting in the crew cabin and all equipment compartments • LED ambient lighting on the superstructure and auxiliary headlights • Pneumatic LED light mast with remote control We would be happy to provide you with a specific offer and show you the vehicle in detail at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer but is for informational purposes only. Subject to prior sale!

Condition: used, Year of construction: 2020, operating hours: 756 h, Equipment: all wheel drive, MAKE: GEHL MODEL: AL340 YEAR: 2020 CE MARKED: YES OPERATING HOURS: 760 HOURS TIRES/UNDERCARRIAGE: 90% POWER: 26KW Hodpfszv Iwyjx Algeu ENGINE: YANMAR 3TNV88 WEIGHT: 2520 KG OPTIONS: QUICK-RELEASE SYSTEM EXTRA FUNCTIONS STREET LIGHTING 20 KM/H KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: like new (used), Year of construction: 2016, operating hours: 12,000 h, Spinner TTC300-52 SMMCY – Turn-milling center, year of manufacture 2016 Control system: Siemens Sinumerik 840D sl, 2-channel operation Operating hours: approx. 12,000 h (meter reading: 12,137.0 h) Condition: very good, from ongoing production Safety standard: EN ISO 23125:BA3 (Chapter 3.4.5) Working area Hsdpozzvd Ejfx Algsu Max. swing diameter: approx. 400 mm Max. turning diameter: approx. 200 mm Max. turning length: approx. 400 mm Travel distances X1 / X2 / Z: 180 / 110 / 450 mm Y-axis: +40 / −40 mm Rapid traverse rates X1 / X2 / Y / Z: 15 / 15 / 15 / 24 m/min Main spindle Max. speed: 5,000 min⁻¹ Chuck size: 210 mm Spindle bore: 42 mm Power: 15 / 19 kW (S1 / S6 40 %) Torque: 95 / 121 Nm Counter spindle Max. speed: 7,000 min⁻¹ Chuck size: 130 mm Power: 6 / 8.5 kW (S1 / S3 25 %) Torque: 49 / 68 Nm Tool turret 2 × driven turret, BMT45 interface All positions driven, max. 6,000 min⁻¹ Power: 2.3 / 3.5 kW (S1 / S3 40 %) Torque: 7 / 11 Nm Detailed configuration available upon request Equipment Y-axis C-axis main and counter spindle Driven tools Chip conveyor Complete machine documentation / manuals available Connections & Units Voltage: 3/PE ~400 V, 50/60 Hz Connected power: approx. 25 kVA Operating current / fuse rating: 34 A / 35 A Hydraulics: 70 bar, tank approx. 10 l Pneumatics: 6 bar Coolant tank: approx. 150 l Central lubrication: approx. 2–3 l Sound pressure level: 70 dB(A) Transport Weight: approx. 4,600 kg (incl. counter spindle, net) Dimensions: 2,500 × 1,900 × 2,165 mm

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AS0456, SPINNER TTS-Duplex High-Performance Precision Turning Machine with multiple slide systems for simultaneous machining with several turrets in parallel with TWO turrets, positioned in the upper right and lower left of the working area Slide System 1, upper right with travel in X1 = 180 mm Y1 = 90 mm (+/- 45mm) Z1 = 704 mm Slide System 2, lower left with travel in X2 = 180 mm Z2 = 620 mm Tool holder on turret system BMT45 SPINDLE 1, version up to 5,000 rpm - 65mm Bar capacity 65mm SPINDLE 2, version up to 5,000 rpm - 65mm Bar capacity 65mm CNC CLAMPING FORCE ADJUSTMENT on Spindle 1 FOOT SWITCH CNC CLAMPING FORCE ADJUSTMENT on Spindle 2 SPINDLE COOLING, Spindle 2 FOOT SWITCH Control system SIEMENS 840DE with the following basic features: - SPINNER - SPIOS 24" Touch control panel for I4.0 applications - Control panel rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color display with multi-touch functionality - User memory 2 GByte - 15 zero point offsets - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL WHEEL on the control panel, integrating the following functions into a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the block -> all important functions of the setup mode integrated into one control element - SHOPTURN - 4-axis machining with a rotary axis - 3D SIMULATION of the finished part - REMNANT MATERIAL DETECTION - DXF reader - 4-axis turning/balanced cutting - "FORCE-CONTROL" - operation against a fixed stop - Rolling peeling - skiving of straight or helical internal and external gears Energy-saving function incl. automatic machine shutdown CHIP CONVEYOR as a hinged belt conveyor exiting to the right, incl. integrated coolant tank with a capacity of approx. 200l and a return pump at 100l/min at 0.9 bar. COOLANT SYSTEM as an additional tank, completely wired incl. accessories Capacity approx. 800l, incl. low-pressure pump 50l/min at 15bar, High-pressure pump 22l/min at 80bar Coolant nozzle in the working area EXHAUST DUST NOZZLE D=200mm DOOR AUTOMATION for the working area door UNIMAG interface for bar loader magazines WORKPIECE HOLDING DEVICE for holding workpieces WORKPIECE CONVEYOR STANDARD DOCUMENTATION in German consisting of machine manual and CNC manuals is delivered in digital form on the control system. STANDARD PAINTING in two colors, light gray RAL7035 and blue-gray RAL5008 Electrical version EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN system (5-conductor) Tool holder package Hodpey S Tlwsfx Algeu Notes: The price includes warranty services only within Germany. For new and demonstration machines, the pictures are not necessarily of the individual machine, but of comparable machines. Illustrated accessories such as clamping devices or tool holders are included in the scope of delivery only to the extent listed in the technical description. Please request a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Year of construction: 2010, condition: used, A Spinner CNC lathe in need of repair is offered. Control: FANUC Series 31i-A, spindle operating hours: approx. 36824h. The lower turret is locked but incorrectly indicates unlocked status. A broken spring is suspected as the cause. Documentation available. Inspection by appointment possible. Hodpfxoz Akwcj Algsu

Condition: good (used), Year of construction: 2023, functionality: fully functional, Spinner TC 600, Year of manufacture 2023, Fanuc 32 i TB control system, Travel range X/Z 275/700 mm, Chip conveyor, Tailstock, 16-station turret, VDI 40, Hsdezua Nfspfx Algou C-axis, Powered tool holders, 3-jaw chuck, Ø 250 mm, Accessories.

Condition: used, Year of construction: 2012, x-travel 760 mm y-travel 460 mm z-travel 460 mm control TNC 620 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 14 / 10 kW Torque 89 / 63,7 Nm tool taper SK 40 table surface area 900 x 410 mm max. table load 350 kg T-slots 4x number of toolpositions 24 pos. max. tool diameter 130 mm max. tool length 200 mm max. tool weight 8,0 kg rapid traverse ( X / Y / Z ) 36 m/min total power requirement 20 kVA weight of the machine ca. 3,3 t dimensions of the machine ca. 3,0 x 2,5 x 2,9 m Hedpfx Alszgibuogeu CNC Machiningcenter Vertical SPINNER - VC 750

Condition: excellent (used), Year of construction: 2016, operating hours: 13,100 h, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: TNC 620, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 3-axis machining center Manufacturer: Spinner Type: VC-450 Year of manufacture: 2016 Control system: Heidenhain TNC-620 Operating hours: approx. 13,100 h Serial number: BV XXXX Technical parameters: ----- Hodpfxjzytzfo Algsu • Travel ranges X-Y-Z: 450 x 400 x 400 mm • Work table 770 x 410 mm • Max. workpiece weight: 200 kg • Spindle: 15,000 rpm • Tool magazine: 24 x HSK-A63 • Coolant system 20 bar including internal coolant supply, bed flushing, ..paper band filter with 300L additional tank volume • LED work area lighting • Oil mist extraction • 3D touch probe • Chip conveyor • Machine weight: approx. 3.5 t • Dimensions: 2,400 x 1,700 x 2,500 mm Accessories: ----- • Documentation

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: VT0479, VC850 travels: X850, Y510, Z510 mm High-performance milling spindle up to 12,000 rpm as a built-in hybrid spindle with direct drive, without belt Tool holder on spindle SK40 DIN69871 with pull stud DIN69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in X/Y/Z axis SIEMENS 840DE control with the following basic features: - SPINNER - SPIOS 24" touch panel for I4.0 applications - Control panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point offsets - 1 free USB interface - Ethernet interface standard In the latest generation of SIEMENS "SINUMERIK ONE" control - SPINNER - SPIOS 24" touch panel for I4.0 applications - Control panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point offsets - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL-WHEEL on the control panel, integrating the following functions into a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the block -> all important functions of the setup mode integrated into one control element - SHOPMILL - 3D SIMULATION - REMNANT MATERIAL RECOGNITION - DXF reader Fully integrated 1-axis TILTING TABLE, centrally mounted in the working area on the table, with: - Pivoting cheek approx. 580mm long for 3-sided machining - Swivel range of the A-tilting axis is infinite - Counter bearing to support the rotary table bridge UNIVERSAL CHIP CONVEYOR VC850 PREPARATION of the spindle FOR HIGH PRESSURE for the use of the additional tank up to 22 bar HIGH-PRESSURE TANK 22 bar Additional compressed air on the spindle head Compressed air centrally through the milling spindle, alternatively to coolant nozzle in the working area PREPARATION FOR SPINNER STANDARD MEASURING PROBE Wireless SPINDLE PROBE universal robot interface UNIROB CLAMPING HYDRAULICS incl. 2 pcs. 4/4-way VALVE for workpiece clamping up to 200 bar hydraulically STANDARD DOCUMENTATION GERMAN consisting of machine manual and CNC manuals is supplied in digital form on the control. Paper manuals available at an additional cost LIFTING LUGS for crane unloading, set consisting of 4 pcs. mandatory for crane transport STANDARD PAINTING two-tone in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Hsdjy S Tpiepfx Algou Mains frequency 50Hz (+/-2%) TN network (5-conductor) Notes: The price includes warranty services only within Germany. For new and demonstration machines, the images are not necessarily images of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are only included in the scope of supply to the extent listed in the technical description. Ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: excellent (used), Year of construction: 2014, Spinner VC 750 CNC machining center Year of manufacture: 2014 X-axis travel: 760 mm Y-axis travel: 460 mm Z-axis travel: 460 mm Control system: Sinumerik 840D SolutionLine Spindle speed range - main spindle max. 12,000 rpm Drive power - main spindle 14 / 10 kW Torque 89 / 63.7 Nm Tool holder: SK 40 Table surface area: 900 x 410 mm Max. table load: 350 kg Number of tool positions: 32 Max. tool diameter: 130 mm Max. tool length: 200 mm Max. tool weight: 8.0 kg Rapid traverse rate (X / Y / Z): 36 m/min Total power consumption: 20 kVA Machine weight: approx. 3.3 t Space requirement: approx. 3.0 x 2.5 x 2.9 m Linear measuring systems Hodpfezuba Sex Algsu Chip conveyor

Condition: like new (used), Year of construction: 2021, operating hours: 900 h, functionality: fully functional, Control: FANUC Series 32i Model B Swing over bed: 600 mm Max. turning diameter: 400 mm Max. turning length: 650 mm Spindle bore: D65 mm X-axis travel: 275 mm Z-axis travel: 700 mm C-axis: 0.001 degree Rapid traverses (X / Z): 15 / 24 m/min Spindle speed: 5,000 rpm Hsdpfx Aezd Evcolgju Drive power: 34 kW Torque: 325 Nm Tool stations: 12 (all stations driven) Tool holder: VDI40 Speed of driven tools: 6000 rpm Weight: approx. 5800 kg Dimensions (L x W x H): 2800 x 1750 x 2090 mm Equipments, accessories: - Programmable C-axis - Driven tool turret - Chip conveyor - Coolant system - Static tool holders - Driven tool holders - Tool setter / Tool measuring arm - D200 mm hydraulic 3 jaws chuck - Tailstock - Manuals The machine is barely used and is in mint condition. Immediately available.

Condition: good (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 400 mm, turning length: 500 mm, turning diameter: 280 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 515 mm, Well-maintained SPINNER TC400 CNC lathe manufactured in 2012 and equipped with Siemens Sinumerik 840D ShopTurn control. The machine is in good technical condition, regularly serviced and ready for immediate operation. Hedpfx Alezarxwegeu This machine is equipped with a tailstock and is ideal for the machining of shafts, flanges and precision turned components. Its rigid construction and reliable Siemens control system ensure excellent machining accuracy and productivity. The machine can be inspected under power by prior arrangement.

Condition: used, Year of construction: 2006, operating hours: 29,199 h, functionality: fully functional, machine/vehicle number: AK0272, Equipment: documentation/manual, - Year of manufacture: 2006 - Fully functional, powered on, ready for demonstration - With driven tools - With sub spindle - Siemens 840 D control - Incl. chip conveyor - Swing diameter over bed: 685 mm - Centre distance: 526 mm Hjdpexgrymofx Algou - Travel paths: X 240 mm / Z 640 mm / B 520 mm - Rapid traverses (X, Z, B): 18 / 24 / 24 m/min Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: used, Year of construction: 2016, Used 2016 SPINNER U-1520 Machining Centre Supplied with Siemens SINUMERIK 840 control, 12,000 RPM spindle, 32-station tool changer, 80 bar high-pressure coolant, air through spindle, Renishaw probe, touch probe, and additional Ø650 mm rotary table. ----- SPECIFICATION: TRAVELS: - X Axis: 1,500 mm - Y Axis: 500 mm - Z Axis: 600 mm - 4 Continuous Axes + 1 Positioned Axis TABLE: - Rotary Table Diameter: 650 mm - Fixed table: 920x540mm SPINDLE: - Max Speed: 12,000 rpm - Taper: SK40 - Air Through Spindle Hsdpfozx Ehnsx Algou TOOL CHANGER: - Capacity: 32 Tools COOLANT EQUIPMENT: - High Pressure Coolant: 80 bar GENERAL: - Control: Siemens SINUMERIK - Renishaw Probe - Touch Probe - Year of Construction: 2016 Control: Siemens 840D Spec: Travel X 1500 Y500 Z600 | Spindle Speed 12000RPM | SK40 Accessories: 5 axis Table, Fixed Table, 32 Tool Changer

Condition: excellent (used), Year of construction: 2010, Spinner Tc400 52mc CNC turning machine Hjdozua Etopfx Algsu Year of manufacture: 2010 Control system: Siemens 840D SolutionLine Turning length: 550 mm Turning diameter: 280 mm Spindle speed (max.): 5,000 rpm Travel in X-axis: 200 mm Travel in Z-axis: 515 mm Rapid traverse rate X-axis: 15 m/min Rapid traverse rate Z-axis: 24 m/min Overall height: 1,800 mm Overall length: 2,100 mm Overall width: 1,350 mm Quill travel: 500 mm Quill diameter: 60 mm Quill stroke: 125 mm Total weight: 4,000 kg Chuck outer diameter: 225 mm Equipment: Chip conveyor Automatic door

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,160 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Table length: 1,320 mm Table width: 610 mm Accuracy: ±0.01 mm Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Hjdpszzx Hiefx Algeu Spindle speed: max. 12,000 RPM MACHINE DETAILS Control system model: Siemens Sinumerik 840D Input voltage: 400 V Weight: 7,000 kg EQUIPMENT Chip conveyor Documentation Oil mist separator Note: The machine has undergone regular electronic and mechanical maintenance. New ball screws were installed approximately 1 year ago.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 410 mm Table length: 650 mm Table width: 450 mm Table load capacity: 250 kg Workpiece length: max. 650 mm Workpiece width: max. 450 mm Workpiece height: max. 450 mm Workpiece weight: max. 250 kg Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Accuracy: ±0.015 mm Spindle speed: max. 12,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840D Input voltage: 400 V Input current type: Three-phase Hjdpfx Aozzx H Aolgeu Dimensions & Weight Dimensions (L x W x H): 2,000 x 3,000 x 2,500 mm Total weight: 4,000 kg EQUIPMENT Oil mist separator Spindle cooling (20 bar) Documentation ShopMill function Note: The machine has been regularly maintained electronically and mechanically. New ball screws and linear guides were installed approximately 2 years ago.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: AB0704, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 810 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Hsdpfx Alszzx Hcjgou Workpiece weight: max. 1,000 kg Table load: 1,000 kg Spindle speed: max. 8,000 RPM Number of tool positions in the tool magazine: 32 MACHINE DETAILS Control model: Siemens Sinumerik 810D Total weight: 5,000 kg Input voltage: 400 V Type of input current: Three-phase EQUIPMENT CE marking Chip conveyor Spindle speed continuously adjustable 20 bar spindle cooling Paper filter Shopmill Note: The machine has been regularly maintained. One slot in the tool changer is defective.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, SPINNER TC300-52 SMCY – CNC turning center, manufactured in 2012 including bar feeder Spinner Servo-Load 80-1500 and tool package Availability: expected November/December 2026, as soon as the replacement machine is delivered. The machine is currently in continuous production and operating at full capacity – inspections while powered and in operation are possible at any time by appointment. It has been running continuously in a single-shift operation. Operating hours: 25,000 hours General - Manufacturer: SPINNER Werkzeugmaschinenfabrik GmbH, Sauerlach - Type: TC30052SMCY | Machine no. AZ0145 | Manufactured in 2012 - Control: Siemens Sinumerik 840D sl, ShopTurn - Connection: 3/PE ~ 400 V, 50/60 Hz, I_B 34 A, I_N 35 A - Weight approx. 3,700 kg | Dimensions approx. 2.0 × 1.6 × 2.0 m Working area - Max. swing diameter approx. 300 mm - Max. turning diameter approx. 250 mm - Max. turning length approx. 400 mm - Travels X 180 / Y Z approx. 500 mm - Rapid traverse X/Z 15 / 24 m/min Turret 1 - Max. 5,000 min⁻¹ | 15 kW (S1) | 95 Nm (S1) - Bar capacity 52 mm | C-axis Hsdpfx Aljzx Subegsu Turret 2 (counter-spindle) - Max. 7,000 min⁻¹ | 6 kW | 38 Nm | C-axis Tool turret - 12 tools, VDI 25 - 12 rotating tool stations, max. 6,000 min⁻¹ - Power 5.9 / 2.2 kW (S6 40 % / S1) - Torque 14.75 / 9.5 Nm (S6 40 % / S1) Operating materials - Coolant tank approx. 150 l | Hydraulic tank approx. 11 l | Central lubrication approx. 2–3 l Bar feeder SPINNER Servo-Load 80-1500 - Original Spinner, factory-matched to the machine - Bar length up to 1,500 mm, diameter up to 52 mm - Servo-electric, separate control panel, including guide tubes Scope of supply - Counter-spindle, C-axis, Y-axis, driven tools - Bar feeder Servo-Load 80-1500 - Chip conveyor, chip tray, coolant system - Tool cabinet with driven and static tool holders, drilling bar holders, collets - Complete documentation Pictures and a video of the tools, documentation, and scope of supply will follow in the next few days. Terms and conditions Sale of a used machine from ongoing production, as is, with no warranty of any kind. Price net ex works plus VAT. Dismantling and transport can be arranged upon request. Technical data according to the manufacturer's original documentation. Equipment and condition without guarantee, to be checked on the machine before purchase. If you have any questions or would like to arrange an inspection, please do not hesitate to contact me at any time.

Condition: excellent (used), Year of construction: 2010, Technical specifications: Travel ranges (X/Y/Z): 1460 / 610 / 500 mm Clamping capacity 4th axis: 320 mm CNC control: SIEMENS 840 D - SL Number of axes: 3 Spindle mount: ISO 40 Max. workpiece weight: 800 kg Number of positions in the tool changer: 32 Spindle speed: 12,000 RPM Dimensions (length x width x height): approx. 420 x 2500 x 3000 mm Machine weight: approx. 9.5 tons Accessories: Chip conveyor Hodpjzn Rdaefx Algju The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Spinner MCV 610, Year of manufacture: 2007, Control system: Siemens Sinumerik 840 D, Travel range X/Y/Z: 610/500/500 mm, Spindle speed: up to 10,000 rpm, Spindle taper: SK 40, Tool changer: 24 positions, Hjdszt Iuyopfx Algju Table size: 1000 x 600 mm.

Condition: good (used), Year of construction: 2015, operating hours: 6,600 h, 1 used machining centre Manufacturer: Spinner Hjdpfxeyngc Te Algju Model: VC 750 Year of manufacture: 2015 Control: Heidenhain iTNC 530 Approx. 6,600 spindle hours Travel: X 760 mm Y 460 mm Z 460 mm Clamping table: 900 x 410 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Tool changer: 24 positions Workpiece weight: 350 kg Equipped with: Robot automation Heidenhain iTNC 530

Condition: ready for operation (used), Year of construction: 2012, A CNC vertical machining center is offered. Travel X/Y/Z: 1000mm/500mm/570mm, table dimensions X/Y: 1200mm/500mm, max. workpiece weight: 800kg, distance from spindle nose to table: approx. 120-690mm, tool holder: SK40, max. spindle speed: 10000rpm, tool magazine: 24, max. tool diameter: approx. 80mm, max. tool length: approx. 300mm, max. tool weight: approx. 7kg, rapid traverse X/Y: 24m/min, rapid traverse Z: 20m/min, positioning accuracy: approx. 8-12µm, control: Heidenhain TNC 620. Machine dimensions X/Y/Z: approx. 2700mm/2550mm/2770mm, machine weight: approx. 5100kg. Inspection possible by appointment. Hjdszipgispfx Algju