Used Stapler Center Fritz Gmbh Tpw 30 Al- Pa for sale (92,190)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. Dcjdpjy Urtfsfx Agmok The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2021, condition: good (used), Styrofoam press / compact screw compactor for EPS (Styrofoam®) and XPS, EPS packaging or production waste, Heger – used: Dodpozk Da Hefx Agmsck Price ex works: only €9,950 (net)! Manufacturer: Heger GmbH, Herrenberg Type: Tiger 130 T Year of manufacture: 2021 3x400V, former new price: EUR 15,000 Throughput 1) up to 15 kg/h Achievable compression 1) up to 250 kg/m³ Processable material densities up to 30 g/l Processable molded part height up to 300 mm Effective feed opening (W x D) 700 x 360 mm Block size 130 x 130 mm Installation dimensions (L x W x H) 2,824 x 440 x 1,602 mm Machine weight 310 kg Electrical connection power 1.5 kW Supply voltage (EU) 3 x 230 V 50 Hz 3 x 400 V 50 Hz Supply voltage (USA) 3 x 230 V 60 Hz 3 x 480 V 60 Hz CE marking Condition: good – very good, little use Available: immediately Location: 25813 Husum

Condition: as good as new (ex-display), Year of construction: 2025, Basically a new machine, it was demonstrated at our in-house trade fair (3 days). 5 operating hours. Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow: 6,000 m³/h Rated volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 165 L Dimensions (L/W/H) in mm: 2963 x 994 x 2346 Weight: 880 kg Dodpfx Agebqachjmsck Location: Available from warehouse 54634 Bitburg Immediately available Subject to prior sale.

Condition: new, Year of construction: 2025, Exhibition model – sold at a special price Sold at a special price Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow: 6,000 m³/h Rated volumetric flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Dedjcdy I Topfx Agmjck Special feature: The unit is equipped with a noise silencer – therefore extremely quiet – can be sold with or without it. Location: Available from stock at 54634 Bitburg.

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition model – new Sold at a special price Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 6,000 m³/h Rated volume flow: 5,089 m³/h Vacuum: 2280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Available from Bitburg warehouse Dodscdrzdspfx Agmock Subject to prior sale.

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Djdpfx Aehkzu Ajgmjck Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2024, Description High-quality housing made of galvanized steel Powerful, economical motors Dcedpfx Aefc A Urogmsk As an option, intake nozzle can be positioned at the top or bottom Uniform filter bags for all variants Chip collection in chip containers The modularly designed models in the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the raw air-side fan, creating particularly effective overpressure filtration. Durable, high-quality components and an all-metal housing made of galvanized sheet steel provide investment security, as do the diverse retrofitting options. The particularly attractive price and short assembly times also contribute to making the AL-KO AAS the right choice. Technical data AL-KO AAS 3013 Intake nozzle 200 mm Nominal flow rate 2,500 m³/h Maximum flow rate 3,300 m³/h Maximum negative pressure 2,700 Pa Filter area 3 x 2.2 m² Chip collection volume 3 x 175 liters Motor power 3.0 kW / 400 V Dimensions (L x W x H) 2486 x 578 x 2115 mm Weight: 139 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. Dcodswld Upjpfx Agmok If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Technical Parameters 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing Dcjdpfowld Tfsx Agmok - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Year of construction: 2025, condition: new, Universal Testing Machine PM50 Dcedpfx Asydazusgmek Force: 50 kN Crosshead Travel: 1200 mm Test Area: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Resolution (Travel): 0.01 mm Test Speed: 0.03 - 1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, which means that a "quick test" can be performed even without a PC. For tests requiring data storage and curve recording, our basic software enables you to control the machine and evaluate results. The software allows you to generate different test sequences and create test reports. Furthermore, you can export raw data for further processing in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips/accessories: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: new, Universal Testing Machine PM50 Force: 50 kN Crosshead travel: 1200 mm Installation space: 400 mm Overall height: 1817 mm Weight: approx. 380 kg Resolution: 0.01 mm Testing speed: 0.03-1000 mm/min Return speed: 1000 mm/min Load cell: 50 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for a "quick test" even without a PC. For tests that require data storage and recording of the curve, we offer the basic software, which allows you to control and evaluate the test. This enables you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Dcsdpfx Agjd R Dp Esmok Pressure plates, bending devices, shear devices, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: excellent (used), mileage: 197,000 km, power: 251 kW (341.26 HP), first registration: 07/2021, fuel type: diesel, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,000 mm, loading space width: 2,550 mm, Year of construction: 2021, operating hours: 76 h, Equipment: crane, Unladen weight: 11,985 kg Payload: 9,615 kg Gross vehicle weight: 21,600 kg Body manufacturer: Palfinger PK 12002-EH D CE marking: yes Technical condition: very good Visual condition: very good Djdpfewmcpnsx Agmock Price: On request

Condition: excellent (used), mileage: 680,000 km, power: 537 kW (730.12 HP), first registration: 08/2015, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 10,500 kg, permissible axle load (axle 3): 8,500 kg, loading space length: 6,350 mm, loading space width: 2,550 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Low noise - Intarder - Refrigerator - Alloy wheels - Air suspension - Air horn - Sun visor - Auxiliary heater - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication system - Towing jaw Dcsdpfswtfvwox Agmek = Further Information = Axle configuration Maximum front axle load: 9,000 kg Rear axle 1: Max. axle load: 10,500 kg; Suspension: air suspension Rear axle 2: Twin tyres; Lift axle; Max. axle load: 8,500 kg; Suspension: air suspension Weights Unladen weight: 15,100 kg Payload: 12,900 kg Gross vehicle weight (GVW): 28,000 kg Functionality Body manufacturer: Palfinger PK 18502-SH E CE marking: yes Condition Technical condition: very good Visual condition: good Identification Registration number: 10-BXP-5

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. Dsdpowlc Stsfx Agmjck With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Dedeun R Ufjpfx Agmsck Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Dcodpfx Agoun R N Asmek Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, empty load weight: 50 kg, input frequency: 50 Hz, Tool tempering heating: 9 kW. Temperature: 150°C. Dcedpfezab A Esx Agmek

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Dcedpfoi Ar Rujx Agmsk Repeatability: 0.03 mm/m Max. table load: 1500 kg

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake vacuum (max.): 2,400 mbar, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 30 m², total height: 2,350 mm, total length: 3,000 mm, total width: 1,100 mm, overall weight: 900 kg, Dust extractor, chip extractor, self-cleaning pneumatic vacuum filter Alko Mobil Power JET 300 The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. The fan is mounted on the clean air side, minimizing the risk of explosion. Ideally suited for wide belt sanders and all types of dry dust generated in various technological processes. Fan power: 7.5 kW Dcjdpfx Asy A Iwcsgmjk Capacity: 6000 m3/h Vacuum: 2400 Pa Connection diameter: 300 mm Air return Stock number: 1130

Condition: excellent (used), functionality: fully functional, mileage: 117,000 km, power: 251 kW (341.26 HP), first registration: 11/2020, fuel type: diesel, maximum load weight: 14,880 kg, overall weight: 26,000 kg, tire condition: 70 %, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6d, suspension: steel-air, number of seats: 2, total length: 11,000 mm, total width: 2,550 mm, total height: 3,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,000 kg, permissible axle load (axle 3): 8,000 kg, loading space length: 9,050 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Year of construction: 2020, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, differential lock, electronic stability program (ESP), fog lights, full service history, hill-start assist, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, power assisted steering, power mirror, soot filter, start-stop system, tachograph, tail-lift, tire pressure monitoring, truck registration, ADDRESS/Location: 13089 Berlin-Pankow LIKE NEW Complete and up-to-date service history with Volvo Payload: 14,880 kg, 23 parking spaces 2.0 t tail lift with a 2 m extension VEB (Volvo Engine Brake) staged braking assistant Automatic transmission Air conditioning Dsdezkmffjpfx Agmock Rearview camera Adaptive cruise control 6x2, 3rd axle with liftable and steerable axle New MOT/technical inspection upon delivery Electric windows Central locking Electrically adjustable exterior mirrors Sun visor Trade-in possible Delivery possible Location/outdoor area: Pankow

Condition: used, mileage: 97,420 km, power: 243 kW (330.39 HP), first registration: 10/2012, overall weight: 21,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, loading space length: 5,500 mm, total length: 7,600 mm, total width: 2,500 mm, total height: 3,350 mm, Equipment: ABS, air conditioning, all wheel drive, * Iveco Trakker AD 190T33W/P, Palfinger Abroller T 10, Winterdienstfahrzeug, wenig Laufleistung * Abroller Palfinger T 10 * hydr. Verriegelung * Radstand ca. 4,50 m * Euro 5 * 8 Gang + Splitt Schaltgetriebe * Klima * Federung: Blatt/Luft * ABS * Anbauplatte vorne * hydr. SW * Zusatzbeleuchtung * Lampenbügel + 4 x Zusatzleuchten * Salzstreuerhydraulik * AD-Blue * Staubox Dsdpfx Asziv Hcegmock * 2 x Rundumlicht * Multifunktionslenkrad * AHK + DL- Anschlüsse * Allrad * Diffenzialsperren * 2x Luftsitz * Radio CD * el. FHFrontscheibenheizung * Rückfahrcamera * Tempomat * Bedienpult Beilhack für Anbauplatte * Reifen 385/65R22,5 ca. 80% * 315/80R22,5 ca. 80% * gegen Aufpreis mit * Salzstreuer * Schneepflug * Abrollcontainer * deutsches Fahrzeug * Behördenfahrzeug * Laufleistungsnachweise * * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * * WhatsApp

Condition: good (used), Year of construction: 2010, Used heatable / coolable vacuum / pressure vessel with agitator Last use: pharmacy, cosmetics Item number:10816 Volume: 1410 liters Dsdpfxorz Nnbe Agmjck Type: hanging Material (wetted parts): 1.4571 / AISI316 Version: with double jacket Operating pressure according to type plate: +1/+3 bar Max. Max. operating temperature: 0/ +150 °C Tank dimensions: Manhole: 500mm Outer diameter: 1320mm Total height: 1530mm Total width: 1780mm Cylindrical height: 1230mm materials: Interior: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Equipment: Type plate: Yes Agitator Spray head nozzle Empty weight: 955Kg

Condition: like new (used), Equipment: type plate available, Used stainless steel transport container Prepared for agitator Type: SBPA150 Item number: 10796 Dsdpfx Ager A Engsmsck Volume: 173 liters Type: Upright design on pallet Design: Single-walled, 1.5mm wall thickness Material (wetted parts): 1.4301 stainless steel Surface: Satin-finished outside, IIId inside Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: 1/2 hinged lid Underbody: dished bottom with outlet bead Tank dimensions: Tank diameter: 650mm Total height: 815mm Pallet: 675 x 719mm Equipment: 1x 1/2 hinged lid on the top, latching function (lid can be latched in open 90° position) Stainless steel sheet metal grates underneath the hinged lid, screwed, removable DN50 ball valve outlet fitting DIN11851 Galvanized transport pallet Type plate

Condition: used, Year of construction: 2002, Rico Unpacking System Varia with S7 control The machine is dusty but in good condition. Dsdpfx Ajziwyqegmjck

Condition: good (used), Tow hitch, trailer coupling, jaw coupling -Manufacturer: AL-KO, axle braked Dsdpsyvrulofx Agmsck -Type: B 2000-4 -Brake: Type 3081 A -Brake drum: Ø 325 mm Recess Ø 160 mm / Bolt circle Ø 205 mm -Dimensions: see photos -Transport dimensions: 1750/660/H340 mm -Weight: 134 kg