Used Stas Ferrostar 55 Cbm for sale (12,784)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: Ijdpfsy Urtfox Anmeba The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, mileage: 695,423 km, power: 184 kW (250.17 HP), first registration: 08/2007, fuel type: diesel, empty load weight: 7,180 kg, maximum load weight: 7,745 kg, overall weight: 15,000 kg, tire size: 285/70 R19,5, axle configuration: 2 axles, wheelbase: 4,800 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, Equipment: ABS, central locking, cruise control, differential lock, truck registration, | DAF LF 55.250 Flatbed | Palfinger PBS-1500 Tailgate Lift, 1500 kg capacity | EURO 4 | Sliding roof | Electric windows, electric mirrors | Manual transmission | Cruise control | Engine exhaust brake | Tool box | Errors and prior sale excepted. Isdpfx Anozm I N Domsba

Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line including a Kraus Maffei Injection Molding Machine, Model 50/55 CX with Krauss Maffei handling unit, Model LRX 100 (serial 2118838); tray unstacking station; discharge blower, collection device and tray filling station; and Kemapack GmbH strapping/wrapping machine. Ibsdpemn Tu Hofx Anmea

Condition: good (used), Year of construction: 1995, 1 used radial drilling machine Manufacturer: Breda Type: R 55 / 1250 Technical data: Drilling capacity: 55 mm Overhang: 1200 mm Drill spindle taper: MK 5 Drill spindle stroke: 310 mm Spindle speeds, 12 steps: 30 - 1200 rpm Right-hand and left-hand rotation Feed rate, 8 steps: 0.06 - 1 mm/rev Drive power: 4.4 kW Vertical movement of the arm: 705 mm Clamping of the arm and drilling unit: hydraulic Usable machine bed with 4 T-slots: 1325 x 910 mm Coolant system Iodpjzlgvtofx Anmjba Space requirement: approx. L 2100 x H 2500 x W 1000 mm Weight: approx. 3000 kg

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM Ibjdpfx Anshp Rc Iemja FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: excellent (used), Year of construction: 1987, Elektra Beckum used wood band saw BAS 315/5 WN55 Year of manufacture: 1987 Serial No.: 2106584 Saw blade length: 2240mm Voltage: 230 volts Cutting depth: 170mm Parallel stop Base frame Ijdpfxsvkyd Sj Anmeba Location: from stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, minimax ti 55es LL – Table saw The illustration shows the T 55 i elite s in its standard version. The professional machine for skilled tradespeople, featuring a pivoting milling spindle and 4 speeds. M Digital: motor-driven height adjustment and pivoting. Sturdy steel and cast iron construction. Oversized milling unit made of cast iron, pivoting up to -45° to the rear. LED display of milling speeds. Fast, trouble-free speed change via eccentric clamping. Clockwise/counterclockwise rotation. Ibjdpfjdqzh Rex Anmea Display of height and inclination with 1/10 mm accuracy. Heavy-duty professional fence: with fine adjustment via rack and pinion, with numerical display, aluminum fence cheeks, 3-way positioning for quick repetition of the setting. Scope of delivery: Aluminum fence cheeks Arched milling guard Table extension on the left and right Model: minimax ti 55es LL Article no.: 5502252 Technical data Dimensions of the work table: 2500 x 655 mm Dimensions of the format sliding table Usable length of the spindle: 125 mm Max. tool diameter: 240 mm Max. tool diameter (lowered): 230 mm Max. tool diameter (dovetail cutter): 320 mm Spindle inclination: 0 to -45 degrees Speeds: 3500/6000/8000/10000 min-1 Motor power 400 V/ 50 Hz / S6-40%: 5.0 kW Dust extraction port diameter: 2 x 120 mm

Condition: good (used), mileage: 74,346 km, power: 85 kW (115.57 HP), first registration: 03/2021, fuel type: electric, axle configuration: 4x2, wheelbase: 3,920 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 2, total length: 5,930 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 3,300 mm, loading space width: 1,780 mm, loading space height: 1,910 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, power mirror, seat heater, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Rear-view camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 936 kg, Unladen weight: 2564 kg, Gross vehicle weight: 3500 kg, Cabin type: Single cab, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Rear-view camera, Lighting type: Halogen lamp, Air conditioning, Seat heating, Bluetooth, Engine power: 85 kW (114 hp), Fuel: Electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Side paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, 55 kWh AC automatic, original Dutch vehicle = Further Information = General Information Number of doors: 1 License plate: VJT-74-N Weights Unladen weight: 2,564 kg Payload: 936 kg GVWR: 3,500 kg Functional Loading area height: 68 cm Maintenance APK (Technical Inspection): Valid until 04.2027 Condition Technical condition: good Ijdpfozbhyasx Anmjba Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €236 per month (delivery van, 72 months); Please inquire for further information and conditions.

Condition: new, SIMOTICS SD MOTOR TYPE: 1CV3282C Low-voltage motor, IEC squirrel-cage rotor, self-cooled, IP55, thermal class 155(F) downrated to 130(B), gray cast iron housing, Basic line, Premium Efficiency IE3, 60Hz, P60: IE2, 6-pole * Frame size 280M * 55kW (50Hz) 66kW (60Hz) 3 AC 50Hz 400VD/690VY * 3 AC 60Hz 460VD IM B3, 3 PTC thermistors for shutdown (2 terminals), connection box on top. Ibodpfjgpgymsx Anmsa

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 55 EVO The Minipack Replay 55 EVO is a manual shrink film packaging machine with hood, designed for medium production volumes. – Throughput up to 300 units per hour – Usable sealing bar dimensions: 540 × 390 mm – Max. product dimensions: 500 × 380 × 200 mm Isdpfx Asx Tr N Donmjba – Max. film roll dimensions: Ø 250 × 600 mm – Working table height: 925 mm – Machine dimensions (closed): 1,260 × 810 × 1,165 mm – Machine dimensions (open): 1,260 × 810 × 1,310 mm – Machine weight (net/gross): 105 / 126 kg

Condition: ready for operation (used), machine/vehicle number: XLRAE55GF0L350661, mileage: 161,802 km, power: 163 kW (221.62 HP), first registration: 03/2009, fuel type: diesel, empty load weight: 11,290 kg, Year of construction: 2009, For sale is a used vacuum truck/vacuum vehicle, ideally suited for construction sites, tunnel construction, sewer cleaning, or industrial vacuuming applications. Ibjdpfx Anjzcvvlemea Vehicle details: Vehicle type: Vacuum truck Superstructure: Cylindrical tank with pump and suction system Application area: Tunnel construction, construction site, industry Condition: Used, fully functional Robust design for heavy-duty applications Suction and emptying system included

Condition: used, Year of construction: 2022, We are selling, on behalf of a customer, a used Zaug side snowplow, model SG 50K-440-4-55, manufactured in 2022. Ibodszl I E Ajpfx Anmja Side wing snowplow SG50K440 Suspension elements (cable system), 4 pieces Blade length A: 440 cm Clearing width B at a swing-out angle of 55 degrees: 360 cm Plow height: 106 cm Weight with mounting plate DIN 76060-A: approx. 1150 kg Further details are available upon request from Mr. Walter Christian at the following telephone number: . Email address: christian.. Location: 93095 Hagelstadt

Condition: used, empty load weight: 5,300 kg, maximum load weight: 27,700 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 03/2000, loading space length: 7,300 mm, loading space width: 2,300 mm, loading space height: 1,450 mm, loading space volume: 24 m³, total length: 2,550 mm, total width: 3,200 mm, suspension: air, tire size: 385 / 65 R 22,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2-axle, SAF axles, air suspension, ABS (anti-lock braking system), folding U-guard, chute Body: Aluminum round body 24cm³ with inserted steel floor, empty weight: 5,300 kg SAF axles, disc brakes, steel floor inserted on aluminum, ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ibsdpevhhrlsfx Anmja - .

Condition: good (used), functionality: fully functional, battery capacity: 700 Ah, remaining battery capacity: 55 %, battery voltage: 48 V, total length: 1,225 mm, total width: 425 mm, total height: 785 mm, overall weight: 1,118 kg, fuel type: electric, Forklift battery 48V 5PzS700, battery tested, 55% remaining capacity Ibsdszl Dn Tepfx Anmja Year of manufacture: unknown Dimensions (l x w x h): 1220mm x 425mm x 785mm Weight: 1118kg Battery was serviced and tested by a specialist company. Capacity test (C5 discharge test): 390/700 Ah battery Remaining capacity: 55% Equipped with an Aquamatik filling system (BFS) Includes terminal bolts, but WITHOUT end connections.

Year of construction: 1997, condition: good (used), Output: 55.6 kW Iodpfx Ansg A Rq Eemsba Two cooling circuits: 2 x 27.8 kW Refrigerant: R 22 (uncharged) Year of manufacture: 1997

Condition: new, Year of construction: 2026, machine/vehicle number: 20260102011, fuel type: diesel, power: 50 kW (67.98 HP), motor manufacturer: Cummins 4BTA3.9-G2, General information Field of application: Construction Weights Empty weight: 1.176 kg Functional Generator capacity: 55 kVA Dimensions of cargo space: 250 x 100 x 125 cm CE mark: yes Other information Fuel consumption: 10 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A42 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 87 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery Iedpfx Aneyy H T Romoba - Control Panel - Steel canopy - Tank

Condition: used, Second-hand machine Long-belt grinding machine Motor power: 4 PS / 3 kW Motor speed: 2,890 rpm Table dimensions: approx. 2,460 mm x 900 mm Manual table height adjustment Transport dimensions: approx. 3,600 x 1,600 x 1,450 mm Ibjdpfxjzk Nvme Anmja Weight: approx. 500 kg Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Ibedezk Nq Rspfx Anmea Features and technical specifications: Automatic height and swivel adjustment of the spindle with decimal pulses Mechanical display of spindle height and electrical display of tilt adjustment Hinged hood with aluminium guides Adjustable table top opening via table slide System for quick tool change with long tables and extendable workpiece support Table size 2500 x 780 mm Spindle adjustment – 45° to +45° Spindle diameter 30 mm Spindle stroke 230 mm Max. table opening: 300 mm 5.5 kW motor with automatic star-delta start with clockwise and anti-clockwise rotation Speeds: 3000/4500/6000/8000/10000 rpm Electronic programming of spindle height, spindle tilt and stop position (milling stop) Extraction at top and bottom: 120 mm Dimensions 2570 x 1450 mm Weight approx. 670 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, machine is unused Features and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Useful length of the spindle: 125 mm - Spindle mandrel diameter: 30 mm - Speed display: LED display on the front of the machine - Max. tool diameter (standard): 240 mm - Maximum tool diameter that can be lowered: 230 mm - Maximum tool diameter for profile milling: 240 mm - Maximum tool diameter for tenon milling: 320 mm - Work table length: 1,200 mm - Work table width: 530 mm - Table height: 900 mm - Slide carriage length: 1,200 mm Ibodpezk Nn Aefx Anmoa - Slide carriage width: 360 mm - Slide carriage height: 142 mm - Extraction nozzle diameter: 2 × 120 mm - Drive motor power: 5.0 kW - Mains voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: at short notice Storage location: DE-63934 Röllbach

Year of construction: 2004, condition: used, functionality: unexamined, ASYS Rommel PCB Transport System – Items 1x LAG 55 WA Magazine Loader 2x TRM 01-S (1x OK, 1x spare part) 1x LAG 55 WA 470 Magazine Loader 1x LBE 55 WA 470 Magazine Unloader 2x FPS 30 Transport and Buffer Module - All devices are untested; however, where a power connector was present, at least the display was switched on and booted. - For an additional charge, we can arrange shipping or assist with it. Ibedpfezktx Ejx Anmoa

Condition: used, mileage: 145,086 km, power: 175 kW (237.93 HP), first registration: 02/2016, fuel type: diesel, overall weight: 16,020 kg, axle configuration: 2 axles, color: beige, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typos, and prior sale: Mercedes Benz 1524, 2-compartment garbage truck (Vehicle 853) First registration: February 25, 2016 145,086 km Ibjdpfx Aszi Ignenmsa 10,544 operating hours Engine: 7,698 cc 175 kW / 240 hp Bluetec 6 Permissible total weight: 16,020 kg Unladen weight: 5,050 kg Payload: 10,970 kg Rotating beacon on top, front Various work lights on the sides and rear Sun visor Leaf/air suspension Tires: 305/70R19.5, approximately 80% tread remaining all around Large storage compartment, open, driver's side, center Rearview camera 2 x LED reversing lights Mattocchia 2-compartment body, approximately 12 cbm, manufactured 10/2016 Operation from the driver's side, front and rear, and the passenger side, front and rear 2 seats Heated driver's seat 2 x electric windows, mirrors, heated mirrors Manual roof Multi-function steering wheel Fully automatic transmission Radio/CD Large screen Distance control cruise control with emergency braking assistant, lane keeping assist Price: €20,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typos, and prior sale are subject to change.

Condition: used, maximum load weight: 32,090 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Trailer STC 30 Code L4BH, for chemicals First registration: 01/2023 Iodszkybmepfx Anmsba German registration, from first owner Approximate unladen weight: 6,910 kg Stainless steel chassis, highly polished BPW axles with large disc brakes, 430 mm 1st axle: lift axle Crank-operated support legs, steel, for full load 6 tires, size 385/65 R 22.5, tread depth 70 to 80% Aluminum rims KNORR trailer EBS Tank: 30,000 liters, made of stainless steel 1.4571 AISI 316 Ti Operating pressure: 3.0 bar / Test pressure: 4.0 bar Insulation: 100 mm glass wool 1 compartment with 3 bulkheads 4 manhole covers 1 venting valve, Fort Vale 1 safety valve 1 check valve Air line on the right side, DN 50, with TW 50 connection at the front right Heating preparation for 4-channel hot water 1 outlet, DN 100, uninsulated, with sampling tap at the rear right and TW 80 coupling 1 purging device Pneumatic bottom valve Hoses, left and right, DN 150, approx. 6 m long RENTING is the new BUYING; with us, it is also available as a full-service rental.

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Isdpfx Aoziiypjnmsba Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: excellent (used), mileage: 215 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,590 mm, first registration: 12/2024, emission class: euro6, color: silver, driver cabin: day cab, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, power assisted steering, sliding door, traction control, = Additional Options and Accessories = - Apple CarPlay - Heated exterior mirrors - Electric windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver's seat - Height-adjustable steering wheel - Wireless charging function for mobile phones - Air conditioning - LED daytime running lights - Metallic paint - Front center armrest - Radio DAB MP3 Bluetooth 4.0 - Spare wheel - Sliding side door - Immobilizer - Two rear doors - Partition - Partition without window = Additional Information = General Information Number of doors: 5 Cabin: single Registration number: V-55-LKG Technical Information Number of cylinders: 4 Engine displacement: 1,997 cc Transmission: 6 gears, manual transmission Front axle: Max. axle load: 1950 kg; steered Maximum rear axle load: 2000 kg Dimensions Length/Height: L4H3 Iedpsy H Iniefx Anmoba Dimensions (L x W x H): 569 x 208 x 250 cm Weights Unladen weight: 2,028 kg Payload: 1,472 kg GVWR: 3,500 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) Interior Interior: gray Consumption Average fuel consumption: 5.9 l/100km Fuel consumption in urban areas: 5.6 l/100km Fuel consumption in extra-urban areas: 6.1 l/100km Maintenance APK (Periodic Technical Inspection): valid until 12/2027 Condition Technical condition: very good Optical condition: very good Number of keys: 2 (2 remote controls)

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of manufacture: 2008 injection unit: Screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : clamping force: 35 t tie bar distance: 320x320 mm size of clamping platens: 540x540 mm Ejector: hydraulic clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Control with hot runners x 6 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service Krauss Maffei in Germany. It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/width/height: 3.50x1.40x1.70 m Ibsdpfszc Nfyjx Anmoa Drive: Pumps/motor: 11 kW Heating power: 3,78 kW Total power: 14,78 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request