Used Straw; Cutters for sale (2,802)

Year of construction: 2020, condition: used, module 4 diameter 180 mm Bore diameter 40 mm width 67 mm 5 Nedpem Avwzsfx Akuewg weight 15 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request

Year of construction: 2020, condition: used, module 10 diameter 180 mm Bore diameter 40 mm width 75 mm 2 weight 14 kg Milling cutter is as new, without signs of use Nwodpfjm Avwwex Akujg Other used rack and pinion group cutters up to module 10 on request

Condition: like new (used), functionality: fully functional, overall weight: 3,500 kg, Year of construction: 2023, operating hours: 8 h, 3 units available Dimensions: 4,284 x 1,100 x 1,903 mm (L x W x H) Operating weight fully equipped: 3,500 kg Transmission: hydrostatic Engine power: 54.6 kW Engine: Kubota V3307 CR-T EW03 Nodpsyyigmefx Akuswg Digging capacity: 50 to 500 m/h Working depth: 200 to 630 mm Working width: 80 to 140 mm Control: Remote control with proportional servo controls (PPC)

Condition: new, Sind cutter 200 liters with vacuum Type: SVC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Nwodoul Tm Ejpfx Akueg Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 63 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Condition: good (used), Kronen dicer/cutter slicer Type: KUJ-7 Power supply: 230 V, 1 Ph, 50/60 Hz Power:1.1 kW Distance between knives: 20 mm/15 mm/5 mm Nedpfjy Akymex Akuewg Dimensions: 900 mm x 1050 mm x 1750 mm.

Condition: excellent (used), Urschel RA-D Dicer/Cutter/Slicer Height: 2000 mm Width: 1150 mm Length: 1000 mm Nedjy Akq Sjpfx Akuewg Power supply: 400V 50Hz 3N Total power: 3.7 kW Stainless steel Included cutting blade sets: 4 / 8 mm

Condition: used, functionality: fully functional, overall dimensions 1600x1300x1500 mm; bowl 60 l; power supply 400 V, 50 Hz; compressed air; power 18 kW; Nwsdjyzpxljpfx Akusg 3 knives speeds; knives motor 4.5/8/17 kW; 2 bowl speeds; bow motor 0.6/0.9 kW; 1 mixing speed without reverse; mixing motor 1.85 kW; mechanical thermometer; weight 1300 kg.

Condition: excellent (used), Year of construction: 2002, Maximum jumbo roll width 1300 mm Jumbo roll diameter max 1000 mm (1200 mm without splice table) Winding diameter max 600 mm Nodpfx Asxyihnekuewg Operating speed 300 m/min Cutting width possible from 20 mm Year of manufacture 2002 Accessories: - 1 unwind tension shaft D 76 mm - 2 friction winding shafts D 76 mm - 10 upper and lower knives - 1 edge guiding system - 1 cutting table - 1 extraction system for edge trims - silicone-coated guide rollers, suitable for adhesive tapes - with documentation

Condition: good (used), Year of construction: 1990, Macmon M 100 E tool milling machine with 2-axis Elesta-Heidenhain digital readout from training department , rigid table , SK 40 spindle holder. Good working condition, can be demonstrated under power by arrangement. Nodpfx Aorazzrskuswg

Condition: good (used), Year of construction: 1975, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle holder, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Nwedju Ezb Ejpfx Akusg

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Njdpfx Ajv Azb Njkujwg

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display, the machine is in good condition. Rigid table, SK 40 spindle taper, accessories: various collets and arbor holders, counterholder. Good, operational condition. Can be demonstrated under power by arrangement. Nwsdpexbx R Uofx Akujg

Condition: excellent (used), Year of construction: 1979, Deckel FP2 Aktiv tool milling machine with 3-axis Heidenhain TNC 111 Aktiv digital readout. The machine is in very good condition and comes from a state training department. Fixed table, SK 40 spindle taper. Accessories: various collets and arbor holders, tailstock. Very good, ready-to-operate condition. Can be demonstrated under power by arrangement. Nedpoxyhmvsfx Akujwg

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories: various collets and arbor holders, counter support. Good, operational condition. Can be demonstrated under power by arrangement. Nedpfx Akoxu Uvtjuswg

Condition: good (used), Year of construction: 1980, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, fixed table, SK 40 spindle taper, accessories: various collets and milling arbors, counterholder. Good operational condition. Can be demonstrated under power by appointment. Njdpfx Aksxdr Uxouewg

Condition: good (used), Year of construction: 1981, Deckel FP3L Active with 3-axis Heidenhain Active digital display, rigid table, vertical milling head, SK 40 S20x2 spindle mount. Good working condition. Ready for live demonstration upon request. Nedpfxewg S Nkj Akuswg

Condition: excellent (used), Year of construction: 1989, HYDRAULIC VENEER CUTTER Brand : TORWEGGE Model : 3200 Hydro Year : 80'S Machine brought up to standard (DEKRA inspection 03/2023), functional, offered as is, without overhaul. A video of our tests July 2024 MACHINING CAPACITIES : - Cutting length: 3200 mm - Max. cutting width: 60 cm - Passage height 100 mm - 50-70 kP/cm² pressure COMPOSITION : - Robust welded steel-mechanical frame - Ground cast-iron support table Front clearance 40cm Floor height (working height): 0.9-1m depending on installation Front lighting - Control panel mounted on articulated bracket - Rear table with 2 auxiliary extensions (PxL) 1x1.35m Electrically controlled pusher guide Working length 2.12m Distance between supports 30cm Nodpfx Ajrx S Ucjkuswg Manual precision adjustment Dimension indicator on ruler 2 flow recovery ejectors ELECTRICAL CHARACTERISTICS : - Power supply : 400v.Triphasé+N 50Hz - Installed power: 15 kW approx. (2 motors, hydraulic pump and pusher) Machine supplied with electrical diagrams 2 boxes with knives OPERATOR SAFETY : - Lockable disconnect switch - Mushroom-type stops - Two-hand safety control device - Frontal light curtain - Key lock for blade change - Safety contacts on removable housings - Ejectors at end of cycle to advance workpiece onto table Dimensions for transport (WxDxH): - Main frame: 4800 x 1300 x h.1750 mm. Estimated weight: 3000 Kg - Rear guide, on pallet: 2.20 x 1.20 x h1.00mm Estimated weight: 300 kgs Functional machine offered without overhaul.

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Nedpfx Aeyxy S Rskujwg Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: good (used), Year of construction: 2011, Marelec Portio 1 Portion Cutter The fixed-weight portion cutter PORTIO 1 is used for portioning flat products such as chicken fillets, tenders, deboned thigh meat or salmon, with a vertical cut programmed to a fixed weight. This portioner for poultry is also used to cut to a programmed fixed thickness on more rounded poultry products. Nwodeywgrujpfx Akujg Key benefits Optimized yield Unparalleled accuracy Modular belt Upgradable to PORTIO 3 Adding options User-friendly software interface MATRIX P production reports Extremely hygienic, easy to clean Service Low noise Manufacturer:Marelec Model:Portio 1 Year:2011 Capacity:Max 17 cuts/sec. Cameras:1 Belt width:254 mm Max. product dimensions:940x240x150 mm Machine dimensions LxWxH:3.425x1.307x1.569 mm Machine weight:950 kg.

Condition: ready for operation (used), Manufacturer: OTT Type: TKS Nsdpjhir A Hsfx Akujwg working height: 800 mm Dimension: W 1.060 x L 720 x H 930 mm weight approx.: 120 kg Condition: used

Condition: excellent (used), functionality: fully functional, cutting length (max.): 3,100 mm, Veneer Guillotine Casati Macchine CIP31 Working length: 3100 mm Total length: 4070 mm Nedpfx Aoyzzccekujwg

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Nwedpfx Ajyxq Ucekueg

Condition: new, Year of construction: 2024, neu 2024 2517 prompt, Zwischenverkauf v Deutschland 36720 € 701.35 € 1 1500x3000 mm Hypertherm Powermax 125 25 mm 25 mm 57 mm 25 mm 125 A 24 m/min 1/10 mm 400 kg/m² 3560 mm 1960 mm 1500 mm 650 kg Nwodpfx Akowva Iaeuog DEMO MACHINE compressed air powered plasma sourceHYPERTHERM Powermax 125 CNC-workbench software (external PC not included) Height adjustment by arc voltage Set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTION: Suction bridge (prepared for suction diam. 160 mm)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Prinz PC120 in excellent condition for sale. 12 m stacking length, 120x120 cm cutting size. 12 kW main motor. 6 programmable templates. Automatic size adjustment. Nodpfxermiy Ao Akuowg

Condition: good (used), Offer consisting of: Polar 115E, year of manufacture 1995, side air tables, hydraulic lifting device on the left Nwsdeyxy U Sopfx Akusg