Used Support - Longitudinal - Transverse - for sale (14,474)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 11,400 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction, with slight preload in the center, turntable with robust ball bearing race, support wedges with holder, quarter-shell fenders in front of and behind each axle. Tie-down points, low-bed trailer: above the front axle: 2 pairs of ring tie-down points, each 5 tons, at the front on the outrigger low-bed: 4 pairs of tie-down points, each 6 tons, on the sides in the low-bed 5 pairs of tie-down points, each 5 tons, between the longitudinal beams Tow hitch, trailer turntable Tow fork with tested 40 mm drawbar eye, mechanically adjustable in length by 6 x 100 mm and lockable (Tow fork length 1,700 - 2,300 mm) Axles + Suspension BPW drum brake axles, each 10 tons axle load, spring plates. Axle endurance brake test for 105 km/h, rear axle can be manually removed. Air suspension with raising & lowering valve Wheels and Tires 235 / 75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, with connecting lines to the towing vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, rotating beacon with holder, switched via parking lights (light can be removed), 2 pairs of warning signs, double LED illuminated and extendable to 3,300 mm, removable with plug, 2 x 7-pole tamper-proof plugs at the front, with connecting cable, 1 x 7-pole agricultural plug, voltage converter 12/24 Volt (only for electrical system, not for ABS/EBS) Podpsi Ri N Ajfx Afljgp Floor Steel/diamond plate floor on the outrigger, perforated sheet covering between the longitudinal and transverse beams. Axle cover is not designed to be driven over, widening to 3,000 or 3,300 mm is possible. Operating instructions Note! A special permit is required for a 10,000 kg axle load. The permit must be applied for separately in each federal state; the legislator does not have to give a guarantee for 20 tons GVW. Customer risk. A special permit is required if the overall length of the train exceeds 18,750 mm. Observe country-specific registration regulations. The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Observe the BO circle!!! Registration / Signs Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG - FGV), prepared for single-row license plate holder, warning sign according to ECE - 70, contour marking with reflective strips according to ECE R 048 Painting Frame at the front hot-dip galvanized incl. passivation, frame at the rear RAL 9006 silver, tow fork KTL black Note: Archive images!

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system Pedpfx Afozf Nk Telegp • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: good (used), Code: 0425 Pgodpfxezguwho Afljp Brand: NOVAMAC - ITALY Model: P 530 Single-phase 5-works combined machine for woodworking, joinery, furniture, custom-made furniture, wooden joinery, DIY and various Technical specifications: Single-phase motors v. 220 Configuration: Surface planer: Table length mm 1400 Table width mm 300 N° 3 blades Side guide adjustable from 0 to 45° – Motor 2,5 Hp Thickness planer: Thickness height mm 200 Table mm 300 x 540 Automatic feed 6 mt/min Spindle moulder: Shaft diameter mm 30 Max stroke mm 100 Max cutter diameter mm 155 Speed 3000/6000 rpm Motor 1,5 Hp Circular saw: Blade diameter mm 300 Hole 30 Cutting height mm 80 Speed 3000 rpm Motor power 2 Hp Squaring carriage 1000 mm Adjustable support square 0 to 45° Mortising machine: Work surface mm 400 x 220 mm Longitudinal stroke mm 120 Transverse stroke mm 120 Height adjustable work surface Kit OMAS with spindle head and tools for spindle moulder Overall dimensions of assembled machine mm 1600 x 1800 x 1100 h Overall dimensions for transport mm 1600 x 1400 x 1100 h Weight kg 340

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, STARVISION DH 2012 Portal Milling Machine – available for short-term delivery The STARVISION DH 2012 is a high-precision portal milling machine for machining large and heavy workpieces. Ideal for mold making, mechanical engineering, or contract manufacturing, as well as for demanding machining tasks with high requirements for stability, dynamics, and accuracy. Your benefits at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / lease purchase possible ✔ High rigidity for heavy machining ✔ 24 months warranty Why STARVISION: STARVISION stands for modern portal milling machines with high precision and efficient machining. Thanks to its stable portal design, powerful drives, and high-quality components, the machine is ideally suited for demanding applications. Technical features: Control system: HEIDENHAIN TNC 7 control HEIDENHAIN TFT screen 19" HEIDENHAIN motors, measuring systems, and electronic handwheel Cooling: Internal coolant supply (ICS) 70 bar Tool changer: 60-position chain magazine with dual gripper Chip removal: Hinged belt chip conveyor (transverse) Double screw conveyor (longitudinal) Preparation: Preparation for 4th axis (rotary table) Enclosure: Podjq Ixc Tepfx Afljgp Full enclosure, closed at the top Accuracy: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Your advantages as a JMT customer: ✔ Official sales partner in Germany ✔ Technical support and on-site service ✔ Fast supply of spare parts ✔ Training and instruction included

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,950 kg, maximum load weight: 15,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,080 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Fliegl “V-Stream” frame Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy arms based on 20" dimensions for 7.15 m and 7.45 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) Note! Not suitable for 20" containers, or only possible if the container has a tunnel or opening at the front center measuring approx. 200 mm in length and 800 mm in width! Swivel mount with heavy-duty ball bearing swivel ring Wheel chocks with holders Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Quarter-shell fenders in front and half-shell fenders in the rear Includes mud flaps for fenders Large Fliegl mud flap mounted transversely on the underrun protection at the rear *Trailer coupling system (turntable) Drawbar with certified 40 mm drawbar eye *Axles + Suspension Pedpfxozfp S Ds Afljgp SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy maintenance. Air reservoir capacity: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lift & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly “TPMS” tire pressure monitoring system according to ECE R 141, display in the towing vehicle via EBS *Wheels and tires 445/45 R19.5", brand selected by the manufacturer Steel rims, factory silver *Electrical system 24 volts, multi-chamber lights, yellow LED side lighting Yellow LED side lighting linked to the turn signals “Flashing side lights” 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, additional LED work light(s) at the rear, activated via the reverse light LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of registration/license plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Chassis galvanized or painted in colour of choice

Condition: excellent (used), Year of construction: 2016, operating hours: 3,500 h, Quaser MF 500 C Quaser MF 500 C machining center with Siemens 828 D control, manufactured in 2016, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE compliant!! Technical data: Year of manufacture: 2016 Working area and travels: Pgodpfjzdityjx Aflep X-axis (longitudinal): 550 mm Y-axis (transverse): 800 mm Z-axis (vertical): 610 mm A-axis (swiveling range): +30° to -120° C-axis (rotational axis): 360° (continuous) Table diameter / clamping surface: Ø 410 mm Maximum workpiece size: Ø 500 mm × H 300 mm Maximum table load: 200 kg Spindle taper: BT 40 Speed: 12,000 rpm Drive power: 15 kW Tool positions: 30 Number of simultaneous axes: 5 Rapid traverse: 36 m/min Weight: 7750 kg About the machine: Offered is a Quaser MF 500 C machining center with a Siemens 828 D control. This machining center is in very good original condition. It comes from a company where it was only used to a limited extent for prototype manufacturing. Key features: The Quaser MF 500 C is a powerful, vertical 5-axis simultaneous machining center from the Taiwanese manufacturer Quaser. It is designed for the highly precise complete machining of complex workpieces in the aerospace, mold making, and general precision engineering industries. Stable construction: The machine is built to be massive and heavy, ensuring maximum stiffness and vibration damping, even during heavy machining. Tilting table: The swiveling round table enables full 5-axis machining. With support devices (counter bearings), workpieces weighing up to 500 kg can often be clamped. The Quaser MF 500 C has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Quaser MF 500 C on site while it is powered up. You can find more milling machines from well-known manufacturers on our website.

Condition: excellent (used), JET is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as: Tenoning / Finger Jointing / Drilling Mortising / Milling / 4/5 axes profiling. Technical data: Full digital NC axes N. 5 Interpolated linear axes N. 3 Interpolated rotating axes N. 2 Longitudinal X axis 1,800 / 2,200 mm Transversal Y axis 1,300 mm Vertical Z axis 650 mm Length of clamp support table 1,400 / 1,800 mm A axis - Unlimited C axis +/- 180° Pedpfx Afeirmyqeljgp

Condition: good (used), Mikron WF 41C CNC Universal Milling and Boring Machine Professional, extremely robust MIKRON WF 41C CNC universal milling and boring machine. Thanks to its sturdy construction, the machine is ideally suited for workshops, prototype manufacturing, maintenance, or demanding toolmaking applications. The machine is equipped with the proven HEIDENHAIN TNC 155 contouring control. It is extremely easy to program directly at the machine thanks to plain-language conversational guidance; it supports graphic simulations and allows for the easy loading of external CNC programs via the serial interface (ideal for CAD/CAM applications). Technical Data Overview CNC Control Model: HEIDENHAIN TNC 155 Pgedpfezcqf Iox Aflsp Operating modes: Manual operation (like digital readout), positioning with manual input, single block, block sequence, program test (graphic simulation) Interface: V.24 / RS-232-C for data transfer Feed Drives & Travel Ranges X-axis travel (table longitudinal, automatic): 630 mm Y-axis travel (spindle slide transverse, automatic): 500 mm Z-axis travel (table vertical, automatic): 460 mm Feed rate: Infinitely variable from 1 – 3000 mm/min in all 3 axes Rapid traverse speed: X- and Y-axis: 6000 mm/min | Z-axis: 4000 mm/min Max. vertical installation height: 559 mm (between vertical milling head and angle table) Milling spindle drive Spindle speeds: 21 gear stages Speed ​​range: 31.5 – 3150 rpm Spindle motor power: 6.0 / 8.0 kW Tool holder: ISO 40 / M16 with pull stud groove (SK 40 DIN 2080) Quill travel (vertical): 90 mm Table geometry & workpiece capacity Angle table clamping surface: 500 x 1000 mm T-slots: 7 (spacing: 63 mm, width: 14-H7 mm) Vertical clamping surface: 397 x 550 mm (with 4 x 4 M16 threaded holes, 90 mm spacing) Max. recommended workpiece weight: 500 kg Electrics & cooling Electrical connected load: 13.5 kW Coolant tank volume: approx. 100 liters Dimensions & weights Machine dimensions (machine only): 1745 mm (L) x 1501 mm (W) x 2124 mm (H) Max. operating footprint (incl. control arm): 2930 mm (L) x 2115 mm (W) x 2125 mm (H) Machine weight (net): 3100 kg (incl. vertical milling head and angle table) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, mileage: 321,661 km, power: 315 kW (428.28 HP), first registration: 02/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, * ABS Pgedpfsy Dwl Eox Aflep * ASR (traction control) * Radio * Cruise control * Hill-start assist * Electric windows * Electrically adjustable mirrors * Heated mirrors * Roof hatch * Driver comfort seat * Heated seats * Trailer hitch * On-board computer * Central locking * Rear window * Rotating beacon orange * Sun visor * Longitudinal and transverse differential locks * AP axles * Air horns * 2-line air connection * Driving mode: offroad * Hydraulic connection for trailer * 12-speed * Suspension: leaf/air * Payload: 12,260 kg * Continuous brake: High Performance Engine Brake ----Special body: Crane: Atlas 126.3 E, foldable, radio remote control, 3-stage hydraulic extension, fully hydraulic support, 6th and 7th hydraulic circuits for slewing and grab operation. Read load chart: Lifts 5.6 t at 2 m, 3.13 t at 3.8 m, 2.11 t at 5.5 m, 1.6 t at 7.2 m, and 1.28 t at 8.9 m.----Body: VDL roll-off tipper S-14T-5000 for containers 4.5-5.5 m length, 14,000 kg lifting capacity, sliding arm, extendable rear underrun protection, in-cab controls.----Tinted windscreen Sale to business customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE, PARTICULARLY REGARDING EQUIPMENT AND ACCESSORIES. All sales agreements, invoices, pro forma invoices, orders, and sales discussions are based on our General Terms and Conditions (see Legal Notice).

Condition: used, mileage: 356,048 km, power: 300 kW (407.89 HP), first registration: 08/2008, fuel type: diesel, overall weight: 33,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 01/2025, color: white, gearing type: semi-automatic, emission class: euro4, Equipment: ABS, air conditioning, * ABS * ASR * Radio * On-board computer * Rear view camera * Cruise control * Hill start assist * Electric windows * Electric mirrors adjustable * Heated mirrors * Central locking * Fog lights * Roof hatch * Rear window Psdpfsw A Tz Tjx Aflegp * Driver's air seat * Longitudinal and transverse locks * AP axles * Steel bumper * Air dryer * Alloy rims * Orange rotating beacon * 16-speed * Suspension: leaf * Continuous brake: engine brake ----Structure: Putzmeister concrete pump BSF 42-5.16HLS, max. delivery pressure 85 bar, max. delivery capacity 160 m³/h, distribution boom M42-5, Z-fold, 5 arms, reach height max. 42 mtr, reach max. 38 mtr, reach depth max. 29.5 mtr, unfolding height 8.6 mtr, length of end hose 4 mtr/DN 125, delivery line (pipe DN) 125mm, radio remote control + cable remote control, fully hydraulic 4-point Support, central lubrication. Operating hours read: 5,581 h Sale only to commercial customers. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales discussions (see legal notice).

Condition: used, mileage: 350 km, power: 129 kW (175.39 HP), color: white, gearing type: automatic, loading space length: 45,000 mm, loading space width: 18,000 mm, loading space height: 19,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph will be happy to assist you by phone at: ! 2 vehicles available ! Engine: 3.0 l D EVIe 129 kW (176 hp), Transmission: HI-MATIC 8-speed automatic, Rear axle: leaf spring suspension, Bench seat for passenger with 3-point seatbelt in the center seat, Standard headrests, Seatbelt pretensioner on passenger side, Seat covers in fabric, Light and rain sensor, Parking sensors (rear), Tire pressure monitoring system (TPMS), Side vehicle designation, Proactive steering assistant with lane keeping assist (ELK), Emergency braking assistant AEBS with City Brake, Model year 2024, Exterior mirrors, electrically adjustable and heated, Storage compartment above the cab, Driver drowsiness warning system, Speed limiter 160 km/h, Traffic sign recognition with intelligent speed assist (ISA), Electric windows for front doors, Front airbags for driver and passenger with seatbelt pretensioners, AdBlue tank 20 liters, Towing capacity 3.5 t, Reinforced parabolic spring rear axle, single-layer, Fuel tank 63 l, Transverse leaf spring suspension at the front, standard plastic, Rear axle ratio i 3.12, Diesel particulate filter, Automatic torque converter transmission HI-MATIC 8HP, Comfort sound insulation, Cargo area lights, 3 LED, Rear door opening angle 260°, Load lights on the outside of the rear doors, Seat heating, Luxury seat for driver with armrest and lumbar support, adjustable in height, inclination, and longitudinal direction, hydraulically suspended, heated, Preparation for digital EC tachograph 4.1, Additional speed limiter, Mirror for body width 2200 mm, category IV, Rear view camera with dynamic lines, Radiator grille with chrome inserts, My Iveco infotainment system, 10 inches, Leather steering wheel, USB socket on driver and passenger side, Air conditioning with automatic climate control, Adaptive cruise control (ACC), Air conditioning compressor 170ccm, White IC 194, Bridgestone 225/65R16 Four Season tires. Pjdpfx Ajyg U H Refljgp We will be happy to provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with a customized offer. Errors and prior sale excepted! Mr. Rudolph will be happy to assist you by phone at: You can find more information on our website: ... ESP, particulate filter, partition = More information = Engine displacement: 2,998 cc GVWR: 3,500 kg Please contact Tobias Ebert for further information.

Condition: new, Year of construction: 2024, functionality: fully functional, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 12 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 845 x 390 mm - T-slots: number / width x distance: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 950 x 250 mm - T-slots: number / width x distance: 3 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 420 mm - Transverse (Y): 220 mm - Vertical (Z): 380 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 65 - 2,600 rpm. Pgsdpfxjvt Tn Ae Aflop - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 - 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 90 - 470 mm - Distance spindle center to column - min./max.: 120 - 340 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 - 2,600 rpm. - Distance spindle center / table: 100 - 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 1,000 mm/min. - Rapid traverse (X,Y,Z axes): 1,000 mm/min. Motors: - Main drive power: 2.2 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Condition: new, Number of boring spindles 1 St. Boring depth max. 150 mm Motor output 1,8 kW Götzinger HR 150 - Hoffmann system ----- The machine that gives you the highest precision when drilling two levels guaranteed. Frame and slot drilling machine, enables drilling in two levels in one clamping. - Well thought-out, precise and practical stop system - particularly smooth and play-free grid positioning, Feed and transverse adjustment - Guidance systems for the highest demands - Special drill chuck - precise, quiet concentricity - for drilling levels via digital display - Two side stops offer enormous advantages, center stop on request - Continuous front stop with position markings - Drilling pattern depending on the wood profile - free choice, in a 12 mm grid Special grids also possible - integrated dust extraction - the exchangeable additional equipment (e.g. drill heads, Psdpfx Afsytx T Islsgp Miter stops, parapet railing device, side and folding stops) can be easily installed without tools. and dismantle. Technical data: Drilling unit ----- Height adjustment in 2 levels via digital display Height adjustment 100 mm pneumatically Drilling stroke/depth 150 mm by hand Transverse adjustment 320 mm via grid Drilling pattern width 12 mm pitch, standard Three-phase motor 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3-1.8 KW Tool holder ----- Special drill chuck with 2 tool changing inserts 1 x M10, 1 x D 16 stop system ----- 2 side stops can be swiveled in/out 1 longitudinal stop (tube) with adjustable folding stop approx. 1500 mm Elongated hole stop left and right Workpiece clamping ----- pneumatically via foot valve Dust extraction Special accessories - see PDF attachment ----- Price of the above mentioned machine on request! ----- Recommended accessories (additional charge): Two-jaw chuck 2–20 mm, replacement part: EUR 648.00 Chassis: EUR 295.00 2 workpiece support arms (left/right), approx. 800 mm, swivelling: EUR 1,298.00 ----- (technical data according to manufacturer - no guarantee!)

Condition: used, mileage: 152,139 km, power: 368 kW (500.34 HP), first registration: 07/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 11 m³, loading space length: 4,900 mm, loading space width: 2,300 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, navigation system, parking heater, * Sun visor * Power steering Pgedsyawqxepfx Aflep * EDC * ABS * ASR * Radio * Navigation system * On-board computer * Auxiliary heating * Cruise control * Air horns * Hill start assist * Digital speedometer * Electric window lifter * Electric adjustable mirror * Heated mirrors * Central locking * Roof hatch * Heated seats * Cool box * Longitudinal and transverse locks * Off-road reduction * AP axles * Orange rotating beacon * Top air intake * Air dryer * Alloy wheels * Tandem trailer coupling * Hydraulic connection for trailer * Foldable underrun protection * Driver's comfort seat/leather * 16-speed * Suspension: leaf-air * Payload: 9400 * Continuous brake: engine brake ----Special structure: Crane: Palfinger Epsilon M 120 L TR, at the rear, hydraulic. Support, pilot control, high seat, 2x hydraulic extensions, oil cooler, read load diagram: 6.20m=1.72 tonnes/ 7.80m =1.32 tonnes/ 9.30m=1.0 tonnes----Construction: CTM 2-way tipper, steel, with on-board control on the left (2x rams), raised bulkhead, excavator protection Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT+ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: used, mileage: 152,139 km, power: 368 kW (500.34 HP), first registration: 07/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 11 m³, loading space length: 4,900 mm, loading space width: 2,300 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, navigation system, parking heater, * Sun visor * Power steering * EDC * ABS * ASR * Radio * Navigation system Psdpfjyawqrex Aflegp * On-board computer * Auxiliary heating * Cruise control * Air horns * Hill start assist * Digital speedometer * Electric window lifter * Electric adjustable mirror * Heated mirrors * Central locking * Roof hatch * Heated seats * Cool box * Longitudinal and transverse locks * Off-road reduction * AP axles * Orange rotating beacon * Top air intake * Air dryer * Alloy wheels * Tandem trailer coupling * Hydraulic connection for trailer * Foldable underrun protection * Driver's comfort seat/leather * 16-speed * Suspension: leaf-air * Payload: 9400 * Continuous brake: engine brake ----Special structure: Crane: Palfinger Epsilon M 120 L TR, at the rear, hydraulic. Support, pilot control, high seat, 2x hydraulic extensions, oil cooler, read load diagram: 6.20m=1.72 tonnes/ 7.80m =1.32 tonnes/ 9.30m=1.0 tonnes----Construction: CTM 2-way tipper, steel, with on-board control on the left (2x rams), raised bulkhead, excavator protection Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT+ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: new, overall weight: 2,400 kg, color: black, gearing type: mechanical, suspension: other, New HU/AU inspection, for 2 horses. Color: black/black. Full polyester horse trailer, Bücker Long-Life, sandwich construction. Permissible total weight: 2400 kg. Interior dimensions: 3445.00 x 1690.00 x 2390.00 mm. Aluminum sandwich floor. Rear ramp. Bücker Long-Life. Rubber glued and sealed on the floor and rear ramp. Rear ramp rubber with tread strips. Lockable, man-height entry door. Tinted opening windows. Hot-dip galvanized frame with welded longitudinal and transverse beams. Bücker Body-Protect chassis. Shock absorbers for 100 km/h. Safety box bar system, height and length adjustable. Interior equipped with kick protection, side padding and interior lighting. 2 removable feed troughs. Partition with PVC clear film. Lockable saddle room with two saddle holders, pull-out storage compartment, broom, shovel, bridle and whip holder, mirror and interior lighting. Support wheel, automatic. 13-pin connector. Extras: Aluminum rim "Black Shadow", polished black, additional €419.33 net. Premium Careliner M saddle room with pull-out saddle holder, additional €251.26 net. BI-LED lighting, additional €301.68 net. Panoramic roof, additional €587.39 net. FOR US, THE CONDITION AND OVERALL IMPRESSION ARE DECISIVE; THE PRICE COMES SECOND. Purchase price plus 4.9% freight costs and €40.00 for vehicle documents. If you have any further questions, please do not hesitate to contact Mr. Faller at . //*TRADE-IN, PART EXCHANGE OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information without guarantee.* You can find more offers on our website: . The description and specified data do not constitute a guarantee and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale are subject to change! Psdpel Tnv Dofx Afljgp

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee. Pedpfx Afjzb U Epslsgp

Condition: reconditioned (used), Year of construction: 2010, operating hours: 31,600 h, functionality: fully functional, machine/vehicle number: 3078, Travel range Z = 400 mm Y = 200 mm X = 410 mm Power / thrust force Z-Y 2.5 kW / 550 daN (linear motor option = 7.2 kW / 350 daN) X 4.8 kW / > 550 daN X-Y-Z Travel speed 40 m/min (linear motor option = 50 m/min) X-Y-Z-W Acceleration 8 m/s2 / 0.8 g (linear motor option = 10.4 m/s2 / 1.1 g) X-Y-Z-W Resolution 0.0001 mm MAIN SPINDLE + C1 Power 7.5 kW Torque / peak 22 / 28 Nm Measuring system direct Resolution 0.0001° Accuracy 0.001° Bar passage Ø 32 mm Turning spindle speed 72,000°/min Turning clamping force 4,900 N at 6 bar AXIS B (TILT AXIS OF TOOL HOLDER SPINDLE) Power 4.3 kW Torque / peak 119 / 226 Nm Angular travel -25° / +115° Measuring system direct Resolution 0.0001° Accuracy 0.001° Rotational speed 36,000°/min Supporting torque 200 Nm TOOL HOLDER SPINDLE Power 5 kW Torque 6 to 800 min-1 Max. speed 30,000 min-1 Clamping force of the tool holder 2,000 N Blocking torque mechanical blocking via straight-tooth gearing Tool shank taper HSK 40 (A or E) Tool clamping power 1000 daN TOOL CHANGER Number of stations 30 (for HSK 40) CNC control Fanuc 30i/31i type Y-axis (transverse axis) Travel 200 mm Power 4.8 kW Feed power 240 daN Resolution 0.0001 mm Max. rapid traverse G0 50 m/min Pgsdpfx Ajyf Angoflep Max. feedrate G1 20 m/min Measuring system glass scale Z-axis (longitudinal axis) Travel 400 mm Power 7.2 kW Feed power 360 daN Resolution 0.0001 mm Max. rapid traverse G0 50 m/min Max. feedrate G1 20 m/min Measuring system glass scale Includes coolant unit 8 kW and integration of an emergency stop system. Inventory no. 2220114, machine comprising: CONTROL Fanuc 30i/31i, with 14’’ screen LINEAR MOTOR FEED OPTION for Y and Z axes TURNING-MILLING FUNCTION with integration of an indexing system (8 positions) on the tool holder spindle, transformation of the tool magazine for HSK40-A tool holders, increase of the spindle speed to 5500 min-1 4-POSITION PART RECOVERY UNIT “PRM” FOR MACHINING THE 6TH FACE: In idle state, the unit is located protected under the main C1 spindle. The recovery unit moves on the W-axis, which is parallel to the C-axis. Max. speed W-axis: 40 m/min. Travel on W-axis: 310 mm. With 2 vices – power at 5 bar: 3500 N 1 tailstock INCREASED SPINDLE PASSAGE increase from 1 to 50 mm (main spindle) TOOL MEASUREMENT DEVICE “RENISHAW” T27 Measurement of the length of the turning tool. Routine detection by M-code. Automatic tool breakage monitoring. TOOL MAGAZINE EXTENSION Increase in the number of tools from 30 to 60 stations COOLANT THROUGH THE SPINDLE 100 bar, 25 L/min, 400 L tank ADAPTATION AND PREPARATION OF HP THROUGH THE MILLING SPINDLE Mechanical and electrical integration of the turning clutch. PART UNLOADING CONVEYOR Output to the left of the machine PAPER BAND FILTER SYSTEM CLAMPING SYSTEM FOR F-48 CLAMPS ADAPTATION FOR W-20 CLAMPS PREPARATION FOR INTEGRATION OF A BAR FEEDER Subject to errors and omissions, the technical specifications are provided without commitment.

Condition: used, mileage: 174,542 km, power: 348 kW (473.15 HP), first registration: 05/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2026, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, * Sun visor * ABS * ASR * ESP * Radio * Cruise control * Air horns * Hill start assist * Electric windows * Electrically adjustable mirrors * Heated mirrors * Central locking * Fog lights * Sunroof * Rear window * Driver's comfort seat * Seat heating * Longitudinal and transverse locks * Off-road driving program * Steel bumper * 360° rotating beacon (orange) * Air intake on top * Air dryer * Central lubrication system * Tandem trailer coupling * Duomatik air connection Pgodpfx Afezbv R Helep * Maintained according to service schedule * Active Brake Assist * Lane Keeping Assist * 12-speed * Suspension: leaf spring * Payload: 14,560 * Continuous brake: electronically controlled engine brake ----Body: Meiller roll-off tipper RS 21.60 for 4.5-6 m containers/total container length, 21,000 kg lifting capacity, push arm, axle support, internal operation.----Vehicle is maintained according to service schedule at MAN; last service performed in 07/25 at 153,000 km! For sale to commercial businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see legal notice) form the basis for all purchase agreements, invoices, pro forma invoices, orders and sales negotiations.

Condition: as good as new (ex-display), Technical data: System: SSI Schäfer Type: K-SW-4300 Included in delivery: 1x Side panel, grade II Length: approx. 4,294 mm Profile type: C115/22/2 C-profile: approx. 115 x 22 x 2 mm Unit weight: approx. 13.23 kg Information: - for KDR levels in PR and WR systems Pgsdpfx Afsibl Eyeljp from SSI Schäfer, for supporting longitudinal and transverse profiles as well as roller rails - also suitable for bent configurations - can be used both at an angle and horizontally

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902029406, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 06/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images; the vehicle may still be in use. Chassis, semi-trailer, transport company Fine-grain steel, welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approximately 8,040 mm long, 6 coil supports (coil pockets, internal dimensions 82 x 52 mm), coil cover with screen-printed panels and steel crossbars, 2 gap band covers for the coil well, each approximately 293 mm wide, tare weight approximately 13 kg per cover, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, note: to attach the straps in conjunction with the side panels, the side panels must be opened! 9 pairs of lashing eyes, each rated at 5 tons, embedded in the area of the coil well, 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without slide-out compensation, note: free support foot clearance or free rear swivel radius approximately 1930 mm, without supports, extension ladder at the rear, door latch on the side, 2 chocks with holder, aluminum side impact protection, bracket positioned transversely to the longitudinal beam and attached to the longitudinal beam to support aluminum slats, aluminum underrun protection, semi-elliptical fenders, with anti-splash flaps according to EC regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stake pockets embedded in the outer frame, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 19219, 2 stake pockets embedded centrally in the floor, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 192198, note: stake pockets/recesses are not designed for the sole securing of long materials, pipes, etc., without wrapping. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight, air suspension, Podpewhp A Djfx Aflogp without lift axle. The images are archive images; the vehicle may still be in use.

Condition: used, mileage: 300 km, power: 129 kW (175.39 HP), color: green, gearing type: automatic, loading space length: 45,000 mm, loading space width: 18,000 mm, loading space height: 19,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph will be happy to assist you by phone at: Sliding door on the passenger side, seat belts with warning signal for driver and passenger, seat belt color standard, seats not heated, seat covers in fabric, light and rain sensor, high beam control manual, body manufacturer interface, parking sensors rear, tire pressure monitoring system (TPMS), storage compartment above the cab, speed limiter 160 km/h, traffic sign recognition with intelligent speed assist (ISA), electric windows for front doors, preparation for alcohol interlock system, left-hand drive for right-hand traffic, front airbags for driver and passenger with seat belt pretensioners, AdBlue tank 20 liters under the cab, parabolic spring rear axle reinforced, single-leaf, transverse leaf spring suspension front standard plastic, towing capacity 3.5 t, automatic torque converter transmission HI-MATIC 8HP, comfort noise insulation, plastic side wall and door panel high, wooden floor + wheel arch cover, extended partition to the cargo area, rear doors with step on both sides, cargo area lights 3 LED, rear doors opening angle 260°, comfort headrests, bench seat for passenger with multi-function storage compartment and storage box, comfort seat for driver with armrest and lumbar support, adjustable in height, inclination and longitudinal direction, hydraulically sprung, full LED headlights front, preparation for digital EU tachograph 4.1, trailer socket 12V 13-pin, fog lights, heated windshield, mirrors for body width 2200 mm Category IV, rear view camera with dynamic guide lines, rear cross traffic alert with brake intervention (RCTA), turning assistant oncoming traffic with brake intervention (TA) and emergency brake assist with City Brake, exterior mirrors electrically adjustable and heated, lane change assist with door opening warning on both sides + turning assistant passenger side, My Iveco infotainment 10 inch with navigation inductive charging cradle, hot water auxiliary heating, air conditioning with automatic climate control, leather steering wheel with function buttons for radio, telephone, cruise control and menu navigation, intelligent traffic jam assist (TJA) adaptive cruise control (ACC) with Stop & Go, electronic differential lock (EDS) Traction Plus with hill descent assist, fuel tank 86 l between frame longitudinal members, trailer coupling ball head, electric parking brake, tires 235/65 R16, Launch Green Metallic, and more. We would be happy to provide you with a quote for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with an individual offer. Errors and prior sale are subject to change! Mr. Rudolph will be happy to assist you by phone at: You can find more information on our homepage: ... ESP, navigation system, particulate filter, partition = More information = Engine displacement: 2,998 cc GVWR: 3,500 kg Pgedpfxjzayv Ro Afljp Please contact Tobias Ebert for more information.

Condition: used, mileage: 300 km, power: 129 kW (175.39 HP), color: green, gearing type: automatic, loading space length: 45,000 mm, loading space width: 18,000 mm, loading space height: 19,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph will be happy to assist you by phone at: Podpfx Afozayv Dslsgp Sliding door on the passenger side, seat belts with warning signal for driver and passenger, seat belt color standard, seats not heated, seat covers in fabric, light and rain sensor, high beam control manual, body manufacturer interface, parking sensors rear, tire pressure monitoring system (TPMS), storage compartment above the cab, speed limiter 160 km/h, traffic sign recognition with intelligent speed assist (ISA), electric windows for front doors, preparation for alcohol interlock system, left-hand drive for right-hand traffic, front airbags for driver and passenger with seat belt pretensioners, AdBlue tank 20 liters under the cab, parabolic spring rear axle reinforced, single-leaf, transverse leaf spring suspension front standard plastic, towing capacity 3.5 t, automatic torque converter transmission HI-MATIC 8HP, comfort noise insulation, plastic side wall and door panel high, wooden floor + wheel arch cover, extended partition to the cargo area, rear doors with step on both sides, cargo area lights 3 LED, rear doors opening angle 260°, comfort headrests, bench seat for passenger with multi-function storage compartment and storage box, comfort seat for driver with armrest and lumbar support, adjustable in height, inclination and longitudinal direction, hydraulically sprung, full LED headlights front, preparation for digital EU tachograph 4.1, trailer socket 12V 13-pin, fog lights, heated windshield, mirrors for body width 2200 mm Category IV, rear view camera with dynamic guide lines, rear cross traffic alert with brake intervention (RCTA), turning assistant oncoming traffic with brake intervention (TA) and emergency brake assist with City Brake, exterior mirrors electrically adjustable and heated, lane change assist with door opening warning on both sides + turning assistant passenger side, My Iveco infotainment 10 inch with navigation inductive charging cradle, hot water auxiliary heating, air conditioning with automatic climate control, leather steering wheel with function buttons for radio, telephone, cruise control and menu navigation, intelligent traffic jam assist (TJA) adaptive cruise control (ACC) with Stop & Go, electronic differential lock (EDS) Traction Plus with hill descent assist, fuel tank 86 l between frame longitudinal members, trailer coupling ball head, electric parking brake, tires 235/65 R16, Launch Green Metallic, and more. We would be happy to provide you with a quote for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with an individual offer. Errors and prior sale are subject to change! Mr. Rudolph will be happy to assist you by phone at: You can find more information on our homepage: ... ESP, navigation system, particulate filter, partition = More information = Engine displacement: 2,998 cc GVWR: 3,500 kg Please contact Tobias Ebert for more information.

Condition: good (used), various counter bearing support blocks, rollers 5-fold adjustable for transverse and longitudinal rotation to relieve e.g. the welding rotary table or to transport pipes different versions Height adjustment in steps or stepless different heights Pgedpfxsl Dwnls Aflep The carriers themselves have a load capacity of up to 8 tons prices from 480.-€ to 850.-€

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801012811, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, available in multiple units Podpfxjza Agro Aflogp Chassis, semi-trailer, forwarding agent: fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, frame in reinforced design for vehicle loading, outer frame with "Load-Lock profile" approximately every 400 mm for lashing straps, 10 pairs of lashing points recessed in the outer frame at the top/outside, each rated at 10 tons, foldable rear supports, 2 wheel chocks with holder, aluminum side underrun protection, steel underrun protection galvanized, quarter panel fenders in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, 1 spare wheel holder for 1 wheel, with wheel fastening kit, 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking devices recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, the foremost position is a foldable locking device, 10 pairs of stake pockets recessed in the outer frame, internal dimension 70 x 40 mm, 10 stake pockets recessed in the middle of the floor, internal dimension 70 x 40 mm, 2 lashing/stake rails recessed transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). Bottom with angle plate as a closure, open halfway down. For lashing and inserting stakes 80 x 80 mm. Arrangement: Position 2 and 4 according to Fliegl data sheet, 20 stake pockets, hot-dip galvanized, storage space for aluminum ramps, ramps can be slid in from the rear, 3 pairs of foldable eyelets 10 tons in the outer frame (1 in front of the headboard and 2 in the rear area), Axles + suspension: SAF disc brake axles, air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, operation "3x brake", axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system: 2-line compressed air braking system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, with lifting and lowering valve, 2 ride heights, adjustable via hand control, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm, ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm, vehicle - driving stability system Wheels and tires: 435/50 R19.5, brand according to manufacturer's choice, steel rims Electrical system: 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights on the side, 1 on the left and 1 on the right, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, LED illuminated and extendable to 4000 mm, additional 7-pin socket in the underrun protection at the rear Floor: Sieve plate, approximately 30 mm thick, on longitudinal girders for high point load capacity for forklift axle load up to a maximum of 7100 kg, Front wall / front corner posts: 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in box profile, front wall additionally covered with 1250 mm h