Used T.a.c. Input/Output Module for sale (10,922)

Condition: good (used), Serial No. A5E03915601 FS:07 Input: 30AC 400-480V 47-63Hz 10.1A Output: 30AC 0-Input V, 0-550Hz. 7.7A Engine 3kW / 4hp Width: 70 mm Height: 195 mm Ndedpfx Aqjyrqf Hexec Depth: 163 mm Weight: 1392 g Condition: Good, second-hand

Condition: good (used), Osram 897 4121 152 1217 BS Modul Ndodpfx Aqjvx T N Djxjc We have eleven pcs in stock, price is for one pc only.

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Ndedeyug Hxepfx Aqxsc The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI Nedpfx Aqsyug R Roxsdc controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Year of construction: 1988, condition: used, Module filter, free-standing with 4 stainless steel feet with adjusting screws Volume: 197 l Operating pressure: 10 bar Max. operating temperature: 121 °C Ndodpfoxwy U Hjx Aqxjc Length: 0,442 m Width: 0,442 m Height: 1,93 m Material: Stainless steel Base construction: standing on feet Features: Closure with 12 clamp screws; tank connections DN 50; with all fittings, pressure gauge Height of the sieve pipe: = 0.99 m; diameter of the sieve pipe 47 mm

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Mean Well, DIN rail switching power supply -Type: SDR-240-48 -Input: 100-240 VAC 2.6 A 50/60 Hz -Output: 48 V / 5 A -Number: 11x power supply units available -Price: per piece -Dimensions: 125/65/H125 mm Ndodpfx Aexxh Ecoqxsc -Weight: 1 kg/piece

Condition: ready for operation (used), Fanuc A06B-6079-H106 Servo Amplifier Module – without cover and nameplate, professionally fully overhauled and tested with 12 months warranty, used, minor signs of wear, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Ndjdjx Dwm Tspfx Aqxsc

Condition: new, Siemens 6SL3120-1TE21-0AD0 Single Motor Module SN T-R36180169, unused, in sealed original packaging, 100% functional, delivery scope as per photos. Ndsdpfx Aqsx Dxg Uexjc

Condition: new, Siemens 6SL3120-1TE22-4AD0 Single Motor Module SN T-PN6307735, unused, in sealed original packaging, 100% functional, delivery contents as per photos. Ndodpfx Aex Dxhreqxjc

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Ndjdswuqfyopfx Aqxec Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included In excellent working condition

Year of construction: 2016, condition: used, THERMATOOL CFI 200 HF Welder for tube production, 200 kW solid-state high frequency welding system, manufactured in 2016. THERMATOOL CFI 200 HF Welder, designed for reliable high-frequency welding applications with advanced automatic load matching AUTOMATCH and THERMAVIEW remote control. With interconnecting cables, it is ready for re-installation. In excellent worling conditions. TECHNICAL SPECIFICATIONS - Manufacturer: THERMATOOL - Model: CFI 200 - Year: 2016 - Continuous Output Power: 5 - 200 kW - Nominal Welding Frequency: 400 kHz - Total System Power: 307 kVA - Input Voltage: 400 V - Input Frequency: 50 Hz - Input Current: 464 A - Control Voltage: 110 V SCOPE OF SUPPLY HF CABINET - Compact Rugged Enclosure Design - Water Cooled High Frequency Power Transistor Modules - High Frequency Capacitor Bank - Single Axis Table. - Water Flow and Temperature Protection - ‘Automatch’ - Automatic load matching system - Output Weld Lead Assembly DC CABINET Power Supply - SCR Power Controller/Stabiliser - Solid State Low Ripple Filter - Automatic Speed Power Control - Heavy Duty Power Transformer THERMAVIEW Remote Control Console - PC Panel with Thermaview software - Power Control - Pushbuttons and Control Switches - Analog Indication Meters OUTPUT BUSBAR - Straight output busbar CABLES / PIPING - Existing interconnecting cables - Existing distilled water interconnecting piping WORKCOILS - 5 workcoils in the range 25 – 76.2mm Ndjdpfx Aqozi Twrsxec BENEFITS ✓ Solid-state technology for reliable operation ✓ Automatic load matching to optimize welding performance ✓ Integrated THERMAVIEW control for convenient operation and monitoring ✓ Suitable for a wide range of tube diameters with five included work coils ✓ Designed for efficient production and dependable welding performance For more information, contact Continuous Output Power: 5 - 200 kW Nominal Welding Frequency: 400 kHz Total System Power: 307 kVA Input Voltage: 400 V Input Frequency: 50 Hz Input Current: 464 A Control Voltage: 110 V

Condition: used, functionality: unexamined, Extensive collection of a modular Emerson PACSystems RSTi-EP industrial controller. Standalone CPU with decentralized peripherals via ProfiNet. Offered as a complete package: controller, 2 network adapters, numerous digital and analog I/O modules. Suitable for building a complete control node or for expanding or providing spare parts for existing systems. Components: - 1x EPSCPE100 controller (CPU); 2x STXPNS001 ProfiNet slave adapter - 14x ST-1218 (digital input 8x24 V DC); 6x ST-2328 (digital output 8x24 V DC) - 10x ST-3218 (analog input 8x 4-20 mA); 7x ST-4214 (analog output 4x 4-20 mA) - Total of 40 modules: 112 DI, 48 DO, 80 AI, 28 AO - From an industrial environment, sold as is, no warranty/guarantee of functionality; only sold as a complete set, not individually. More equipment and devices are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Njdozmaq Hopfx Aqxjdc Sold on behalf of a customer through the Köck auction house. Located in Eastern Austria, exact address available upon request. Pick-up by the buyer.

Condition: ready for operation (used), Baldor BSC1005-24-HR servo drive, INPUT 320VDC, ID/No: 20707A, serial number: BDDBB20667, used, in good condition, 100% operational, delivery as per photos. Nedpjy Npyfefx Aqxsdc

Condition: ready for operation (used), Baldor DBSC1005-GAAW-2 servo drive INPUT DC320V ID/No: ASR28687G Serial number: 4699MG17225, used, in good condition, 100% functional, delivery as per photos. Ndodpfxoy Np Dko Aqxjc

Condition: ready for operation (used), * Brand: Metso/CFBK * Dim. vibrating chute: 4600 mm x 1100 mm Ndsdpfsy H Iwqex Aqxec * Driving: 18,5 kW E-motor * Incl.: steel construction * Excl.: hopper

Condition: good (used), Servo drive, servo card, input processor, control card, input card, control unit, converter, controller, servo module, axis amplifier, velocity control unit, spindle amplifier module, servo amplifier -Manufacturer: Stöber, transistor amplifiers -Type: TAS 1016 -Input: 230 V 50/60 Hz -Output: 0...160V 10.3A -Dimensions: 270/220/55 mm Njdpfx Aqozk D Tyjxjdc -Weight: 3.4 kg

Condition: new, PNOZ m EF 8DI4DO 772142 Njdszgf Abjpfx Aqxjdc PILZ Partially unpacked for photography – unused item from stock clearance.

Condition: used, Available quantity: 6 units. Used power component / industrial electronics module from Alstom Cegelec for industrial automation and drive technology. Manufacturer: Alstom Cegelec Model: Minisemi-D 380 415 160 Njdszgf E Aepfx Aqxedc Manufacturer's part number: 029.135 724 Version: GO V3.1 Device type: Power electronics module Application area: Industrial automation Condition: Used

Condition: new, Siemens SIMODRIVE 611 power module, 6SN1123-1AB00-0CA3 New Siemens SIMODRIVE 611 power module. The module has not been used. The original packaging has been opened. Manufacturer: Siemens Product series: SIMODRIVE 611 Type: 6SN1123-1AB00-0CA3 Device type: Power module Design: 2-axis module Ndsdpfszcgynsx Aqxjc Rated current: 50 A Cooling: Internal cooling Motor rated current, feed axis: 18 A Motor rated current, main spindle: 24 A

Condition: used, Used Siemens SIMODRIVE 611 power module. This item was removed from an industrial plant. Manufacturer: Siemens Product series: SIMODRIVE 611 Ndjdpjzcg A Asfx Aqxsc Type: 6SN1123-1AA00-0DA2 Device type: Power module Design: 1-axis power module Module carrier: SIMODRIVE 611

Condition: new, New Siemens SIMODRIVE 611 power module. The original packaging has been opened. The module is unused. Manufacturer: Siemens Product series: SIMODRIVE 611 Type: 6SN1123-1AA00-0BA1 Device type: Power module Design: 1-axis power module Assembly group carrier: SIMODRIVE 611 Ndodpfszcg A Nex Aqxjc Available quantity: 1 piece

Condition: good (used), Year of construction: 2022, functionality: fully functional, overall weight: 125 kg, input voltage: 230 V, total length: 1,500 mm, total height: 1,000 mm, total width: 700 mm, Equipment: documentation/manual, Siemens S7 PLC training and testing system AP2, electronics technician for automation technology – conveyor system Manufacturer: Stepp Fabrikautomation GmbH & Co. KG Year of manufacture: 2022 Control system: Siemens S7 PLC Description: For sale is a complete, professionally manufactured training and testing system for training in the field of electronics/automation technology. The system was manufactured by Stepp Fabrikautomation GmbH & Co. KG as a special machine and is used for the practical execution of tasks for the final examination, part 2 (AP2), for electronics technicians for automation technology. The module enables the complete execution of an automation task, from electrical wiring to PLC programming, commissioning, and troubleshooting. Technical equipment: Siemens S7 PLC control system Complete control cabinet with industrial wiring Voltage supply and protection technology Input/output circuitry Control of a conveyor system Nedpfjzp Iqmex Aqxsdc Motor drive with power unit Sensors and actuators Operating and signaling elements Terminal and documentation system Areas of application: Training for electronics technicians for automation technology AP2 examination preparation Vocational schools and technical training centers In-house training and further education Advantages: Industrial design based on special machine construction Not a simple training system, but a practice-oriented machine design Realistic simulation of an automation task Ready for immediate use Ideal for training apprentices Condition: Very good condition, year of manufacture 2022, fully functional. Scope of delivery: Complete testing/training module Control cabinet Conveyor system PLC control system Existing documentation

Condition: excellent (used), RAMA Modular Belt Conveyor – 3.00 m x 250 mm – Stainless Steel RAMA industrial conveyor belt with a modular belt, designed for the continuous and controlled transport of products or packaging between different stages of a processing or packaging line. The equipment features a 250 mm wide plastic modular belt with an approximate length of 3 meters, mounted on a structure made primarily of stainless steel. It incorporates adjustable side guides that allow the product to be kept correctly oriented during its movement. Ndjdpfxezxww Ie Aqxec Its compact and linear design allows it to be used as a connecting element between different machines, facilitating a continuous and automated production flow. MAIN FEATURES -Manufacturer: RAMA -Type: Modular belt conveyor -Approximate length: 3.00 m -Belt width: 250 mm -Configuration: linear -Plastic modular belt -Continuous product transport -Motorized drive -Product side guides -Adjustable guides for format adaptation -Construction primarily in stainless steel -Open and accessible structure -Adjustable support legs -Hygienic design for the food industry -Suitable for continuous industrial operation -Integrable with process and packaging machinery PROCESS The product or packaging is received from the previous machine and is transported continuously by the motorized modular belt. The side guides control its trajectory and maintain an adequate position during transport until it is discharged to the next piece of equipment. It can be used for: -Connecting machines -Transporting empty packaging -Transporting full packaging -Product transfer -Feeding filling and closing machines -Output from packaging machines -Feeding inspection equipment -Transport to end-of-line equipment APPLICATIONS Especially suitable for the food, canning, beverage industries, and filling and packaging lines that require a simple and robust solution to connect different pieces of equipment. Depending on the format and adjustment of the guides, it can be used to transport cans, jars, bottles, trays, packages, and other packaging or products compatible with a modular belt. The combination of 3 m length, 250 mm width, modular belt, and adjustable guides provides a versatile solution for automating the internal transport of products. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Indramat, AC servo controller from CNC machining center Mikron VC500D -Type: TDM 1.2-30-300-W0 -Number: 3x servo controllers available -Price: per piece -Dimensions: 325/390/H105 mm Nsdpjztplyjfx Aqxsdc -Weight: 8.2 kg

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: PXI-6229, For sale: 2 units of National Instruments PXI-6229 Multifunction I/O DAQ modules, in fully working condition. Manufacturer: National Instruments (NI) Model: PXI-6229 Quantity: 2 units Condition: Used – Fully Tested and Working Tested with: NI MAX (Measurement & Automation Explorer) – operation verified Analog inputs: 32 AI (16-Bit, 250 kS/s) Analog outputs: 4 AO Digital I/O: 48 DIO Interface: PXI Counter/Timer: Two 32-bit counters/timers Both units have been thoroughly tested using NI MAX software and have proven to be fully functional. The operation of all analog and digital channels has been confirmed. Removed from a working industrial environment; no faults or irregularities found. Ideal for laboratory automation, research, design verification, and manufacturing testing. Ndjdpfx Aqozh H Ihoxjc Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection for safe delivery. Please contact us if you have any questions!