Used Table: Rotary, Swivel, And Tilting Table for sale (28,497)

Condition: new, table diameter 715 mm table load 500 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1 UpM T-slots 6 x M16 Tilt Angle 90-180-110 ° Fedpfoyv Nxzex Aptopi Tilting Speed 30 sn min./90° weight of the machine ca. 675 kg

Condition: new, table diameter 900 mm table load 1.000 kg Frontal Loading Center (A) 150 mm Fedpfx Ajyv I Rijptepi Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1,1 UpM T-slots 6 x M16 Tilt Angle 90-180-105 ° Tilting Speed 30 sn min./90° dimensions 2100x920x1100 mm weight of the machine ca. 930 kg

Condition: good (used), Year of construction: 1990, Table milling machine with power feed Tilting spindle Fsdpfxsyy I R Re Aptopi With table extension on both sides

Condition: good (used), Year of construction: 1982, machine/vehicle number: 1501-2, Offer 26128 Technical Data: - Max. load capacity in horizontal position: 5000 kg - Faceplate diameter: 1150 mm - Faceplate motorized tilting: 0 - 130° - Rotary movement electronically steplessly adjustable - Right and left rotation - Welding current transmission: approx. 500 A Fjdpsy Ec Emofx Aptepi - Drive: 400 V - Table height in horizontal position: approx. 1220 mm - Handheld remote control - Required space: approx. W 1350 x H 1220 x D 1900 mm - Weight: approx. 3500 kg - Adapter plate with clamping device for round material

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model Fsdpfx Apswugczotjpi 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: like new (used), Year of construction: 2014, functionality: fully functional, UNUSED GSA T320 CNC Tilting and rotating table. Full specification on request. Item in new condition having never been used. Available now.. Fpedpoxy Iq Uefx Aptji Contact us for further information.

Condition: like new (used), Kitagawa MR200 rotary table Fedpfoy H Ewnsx Aptopi Condition: new, unused The table has been kept in storage and not used

Condition: new, The rotary type cleaning unit allow to process parts directly on board the work-cells avoiding costly transport operations. The transfer of the components takes place with an in-built rotary index transfer system which guarantees satellite positioning at loading / unloading and inner operations. Considerable flexibility in the change of costumized jigs as components holders. Elimination of packaging costs and transport costs Re-equipment of the plant in a very short time Number of satellites to be selected in accordance with a defined and accurate washing, blowing and drying process; These plants are fit for the treatment with aqueous detergent solutions, as: Fedpfx Ajwdfyqoptepi Critical machined parts and delicate parts with blind holes and threaten holes, compoenent as: valve bodies, automatic actuators, burner bodies, water meters, friction flywheels, gas valves, hydraulic, pneumatic multichannel distributorss. a.s.o.).

Condition: excellent (used), Year of construction: 2019, ⚡ Optimize your production – faster, more efficiently, without chaos! ⚡ Are you looking for a solution that will improve the organization of production, packaging or picking? Fpedpfxoy Awamo Aptji Discover the professional Virginio Nastri carousel table – designed for maximum efficiency and ergonomics. ⚙️ How does it work? The device operates on the principle of a rotating carousel – products are placed on a circular platform that rotates around its axis. -Elements are transferred to the next stages of the process in a smooth and orderly manner -Constant speed ensures work rhythm and reduces downtime -Ergonomic access from all sides increases operator comfort 🔗 Complete system – ready to work. The set also includes a Virginio Nastri CB/M3 conveyor belt , which enables automatic feeding of products – a perfect complement to the entire production line. 💡 Why is it worth it? ✔️ Increased work efficiency, ✔️better work station organization ✔️real time and cost savings ✔️high-quality workmanship – a proven brand ✔️ ready-made solution for integration with the production line. We have various models of carousels – for boxes or bags

Year of construction: 1964, condition: used, -WKG 429- Fpodjg Nt Dbjpfx Aptji We are offering a grinding machine from Naxos Union. This is a vertical rotary table surface grinding machine with 2 vertical grinding spindle units. Technical data: Manufacturer: Naxos Union Type: FRDA 600/1000 Year of manufacture: 1964 Rotary table: Ø 1100mm Grinding wheel Ø: Shrink-fit arbor 475/254 Grinding wheel Ø: Plain arbor 457/357 Weight: 8t Grinding method: Segment grinding Segment grinding heads: 2 pcs Accessories: Dressing device Water tank with paper band filter Marposs control

Condition: used, rotary table 400mm Fsdpjvpvh Rsfx Aptspi

Condition: used, table diameter 790 mm table load 500 Kg swivelling range 0 - 135 Grad turning speeds max. 2,0 U/min connected load frequency 400 V weight 0,95 t Dimensions (LxWxH) 1,4 x 0,8 x 1,5 m Welding turntable incl. Fpedpfx Apoyx Ip Retei - Control column with foot switch - 630mm chuck - Chuck key

Condition: used, table diameter 500 mm table load capacity 420 kg table height 185 mm centre height 315 mm center hole MK 5 mm indexing 15 ° weight 275 kg dimensions of the machine ca. 600 x 850 x 200 m Rotary table in excellent condition for for horizontal and vertical use. - Serial No.: P56030 - for vertical or horizontal use Fsdpfx Apor Htvnotjpi - Indexing every 15° or continiously variable by clamping - mech. Hand wheel with scale - Center bore taper MT 5 - Hand Lever with 3x indexing discs

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units rotary table diameter: 400 mm rotary indexing table: 60° pitch weight: 2,6 to 1 switch cabinet 1 coolant tank Fpsdpfx Aenvdmwoptoi

Condition: excellent (used), Lazy Susan Rotary Table Stainless steel frame Height adjustable legs Fpjdpfx Apehlp H Dotji Plastic top, diameter table: Ø 1500 mm Total dimensions: 1600 mm x 1500 mm

Condition: excellent (used), Lazy Susan Rotary Table Fjdpohlp Ipofx Aptepi Nylon top with dividers Distance between dividers: 60 mm Diameter top: 1250 mm Height adjustable legs Total dimensions: 1250 mm x 1250 mm

Condition: excellent (used), Soco Lazy Susan Rotary Table Fpodpfx Apjhlp I Nstei Nylon top Diameter top: 1200 mm Height adjustable legs Total dimensions: 1200 mm x 1200 mm.

Condition: new, Year of construction: 2023, Hydraulically adjustable tilting table Maximum load: 1,000 kg Turntable diameter: 850 mm Turntable speed: 0.05 - 1.0 RPM Length / Width: 1,800 mm / 1,450 mm Turntable height, horizontal: 800 mm - 1,275 mm Fjdpfxsh T Dafj Aptopi Turntable height, vertical: 625 mm - 1,100 mm Control devices: 2-pedal foot switch / Rotate LEFT / RIGHT Handheld remote control: Rotate LEFT / RIGHT / STOP, speed control (potentiometer) for stepless speed adjustment, buttons for tilting FORWARD / BACKWARD, buttons for raising UP / DOWN Operation on the control cabinet: Push button "MACHINE ON" Selector switch "HAND / FOOT OPERATION" Main switch "ON / OFF"

Year of construction: 2020, condition: new, Hydraulically adjustable tilting rotary table Fjdpfxod H Hzbo Aptopi Maximum load: 2,500 kg Turntable diameter: 1,200 mm Stroke: 1,050 mm

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, rotary table with clamping slots, and hand-held remote control. Height (rotary table in horizontal position): approx. 532 – 1,132 mm Stroke/cycle time (hydraulic): approx. s = 600 mm, t = 20 s Swivel range of the rotary table: approx. ±300° Height (axis of rotary table in vertical position): approx. 709 mm Dimensions of rotary table: Ø1,200 mm x 40 mm, 6 clamping slots Fpedpfx Apjfw Ah Rotoi Speed of the main axis: approx. 2.0 rpm (other speeds available) Torque of the main rotary axis: approx. 7,500 Nm Speed of the rotary table: approx. 2.5 rpm Torque of the rotary table: approx. 1,500 Nm

Condition: new, For sale a set of jaws for the rotary table of vertical lathes manufactured by Ryazan 1512, 1516, 1525, 1L525. Other spare parts for lathes, milling machines, grinders are also available from stock. We invite you to submit inquiries. Fedpfx Aewald Uoptspi

Year of construction: 1994, condition: used, workpiece diameter 350 mm workpiece weight 99999 kg workpiece height 240 mm total power requirement 7,5 kW weight of the machine ca. 2 t Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Mit komplett neuem Schaltschrank und neuer Steuerung mit BEMA Schleifsoftware Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespart. Der Abrichtbetrag wird automatisch kompensiert. Automatische Antasteinrichtung AT-R: bietet die Möglichkeit, mit der Schleifscheibe das Werkstück schnell und automatisch anzufahren. CNC-Steuerung mit höchstem Programmierkomfort Unterschiedliche Schleifprogramme für -Pendelschleifen -Kurzhubschleifen -Einstechschleifen -jeweils eine oder mehrere Flächen in gleicher oder unterschiedlicher Höhe Ins Schleifprogramm integrierte Abrichtzyklen Fpjdpfxsxbtl Tj Aptji -Tischabrichten mit Einzeldiamant -Automatisch Geradabrichten -CD-Abrichten mit AF65 Minizyklen: -automatisches Antasten an das Werkstück -Positionieren einzelner Achsen -Abrichten Einsatzgebiet: Hochgenaue Planschleifarbeiten in der Mittel- und Großserienproduktion bzw. Einzelteilfertigung in zentrischer Aufspannung

Year of construction: 2015, condition: used, workpiece diameter 300 mm workpiece weight 999 kg workpiece height 145 mm Features: -Digital display vertical axis -Automatic feed -Programmable automatic end stop -Grinding spindle drive with infinitely variable electronic speed control -Infinitely variable cross feed and table rotation -24V magnetic clamping plate 300 mm -Various occupational safety devices, e.g. protective cover monitoring, operating status display via traffic light -Lubricating oil level monitoring -The machine was completely overhauled in 2015, at which time the entire electrical system was replaced with PLC control and 24V control voltage -Paper belt filter system specially designed for this machine The following work has now been carried out: -Replacement of bellows and belts -New bearings for grinding spindle -Grinding carriage bed and rotary table bed scraped by hand to restore better and more precise running characteristics -Grinding carriage and cross table lifted from machine body and all tracks cleaned, lubrication checked -Various wear parts, such as rubber caps and switching elements, replaced -Detailed functional check -Modernisation of feed arm Fpedpfxjxflclo Aptsi -Paint touch-up work, machine colour: light grey RAL 7035 and RAL 7012

Condition: new, Tilting Transfer Table Brand: Pertici Model: BF TEA 20-14 Fsdpfx Ajy A Imdsptspi Tilting and extendable assembly table for the production of sashes and frames. Complete with pneumatic retractable roller conveyor. Work surface with profiles equipped with anti-scratch gasket. Dimensions: Minimum width: 2,000 mm Maximum width: 3,900 mm Minimum depth: 1,374 mm Maximum depth: 2,400 mm Working height: 932 mm

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal swivel plate position: 10 t Load capacity with vertical swivel plate position and center of gravity distance of 300 mm: 10 t Load capacity with vertical swivel plate position and center of gravity distance of 830 mm: 5.5 t Swivel plate dimensions: 1500 x 1500 mm Swivel plate speed, hydraulically continuously adjustable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range (to): 140 s Swivel time for full swivel range (from): 120 s Hydraulic drive: 380 V Fedpfscblc Sjx Aptopi Height of the swivel axis above the floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Weight of the counterweight: 2.3 t