Used Thermal Shock Testing System –70 To +240 °C for sale (83,949)

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important information for your safety as a buyer! The following points are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Should you have any further questions, we are happy to answer them by phone. Ljdjx Hglyopfx Am Noaa

Condition: good (used), Vötsch Model: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber internal dimensions: height 950 mm, width 800 mm, depth 650 mm External dimensions: height 2025 mm, width 1000 mm, depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Heat compensation at -20°C: 8,000 W Heat compensation at +20°C: 8,000 W Test volume: 480 liters Left: 1x side port, ∅ 125 mm Lodsxzgn Iopfx Am Noaa Left: 1x side port, ∅ 50 mm Right: 1x side port, ∅ 125 mm Chamber is water-cooled Test chamber illumination: Halogen bulb: 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Weight: approx. 1,250 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Year of construction: 2018, operating hours: 303 h, condition: refurbished (used), functionality: fully functional, The internal engraving system delivered by Cerion GmbH in 2018 has seen almost no operating hours. The laser is in as-new condition. The original purchase price of the system was €49,000. Supra Laser Solutions GmbH is the successor to Cerion and Cericom GmbH in the field of internal engraving. The system is factory-tested and fully functional. A 12-month warranty is provided on the system, including the laser. Ledpexvc Igjfx Am Nsaa

Condition: excellent (used), Year of construction: 1982, BALESTRINI Double Tenoner: Maximum working width: 360 mm Maximum working height: 120 mm Minimum working length: 240 mm 2 spindle heads with 2 x 7.5 HP motors Ljdpfx Amjxuwa Is Noaa Feed motor: 1 HP Weight: 1,100 kg 2 return conveyors for workpieces

Condition: used, mileage: 120,572 km, power: 132 kW (179.47 HP), first registration: 06/2021, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,800 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,000 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 1330.5409538 ----EQUIPMENT * Storage: Central storage compartment - with USB charging port * Dual tires on the rear axle * Bodybuilder interface with expansion module * Air conditioning in the driver's cab with automatic climate control - including pollen filter and outside temperature display - including 170 cm³ air conditioning compressor * SAXAS box body with 600 cm loading area length Lodpfsrt Smiox Am Neaa * 117 l fuel tank * Tail lift * Steering wheel: Steering column adjustable in 2 positions - height and tilt * Air suspension on the rear axle * Radio: DAB digital radio - Digital radio with high-speed dual tuner - Voice recognition, USB port, Bluetooth - Hands-free system - Multifunction steering wheel * Rear cross member * Cruise control * 20 l AdBlue tank * Driver's airbag with belt tensioner * Comfort dashboard - Blue applications on the dashboard and door panels - Map storage and cup holders, as well as a foldable document compartment in the center console * Electrically adjustable and heated exterior mirrors with wide-angle mirrors and integrated turn signals * Seat: Passenger seat with three-point belt for the center seat * Diesel particulate filter - controlled by EDC - Catalytic converter with SCR * Digital EC control unit DTCO 4.0 * Torsion bar suspension on the front axle - front axle load increased to 2100 kg * Tachometer * Electric windows, left and right * Transmission: 8-speed automatic transmission with 8-speed torque converter ZF 8 HP including gear indicator * Driver's seat headrest adjustable for height, angle, and length * Heated crankcase ventilation * Radiator grille with chrome inserts * Paint finish: Solid color * Manual headlight range adjustment * Model designation on both sides * Upholstery: Fabric * Rear window in driver's cab * Rear panel trim in driver's cab * Power steering * Front mud flaps * TFT display in instrument cluster Color * Trailer socket preparation * Maintenance indicator * Electronic immobilizer * Tinted windshield and cab side windows * Central locking with remote control ... and much more ----The vehicle is unfinished! Nationwide delivery is available for an additional charge. Errors and prior sale excepted. We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any questions? We'd be happy to advise you!

Condition: used, mileage: 1,001 km, first registration: 01/2000, color: black, driver cabin: other, gearing type: other, Year of construction: 2000, Vehicle location: Bovenden, hydr. transverse locking Body: 18t roll-off system Gergen GRK 18/70 C for containers up to 7m Dismantling of Daimler-Benz Actros 2643 6x4 with wheelbase 4500mm! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ljdpfxji Rlaye Am Neaa - .

Condition: used, PCB test device with contact pin testing, ELABO 99-9Z ZM 107011 test system Laedsxcivqepfx Am Nea Test system for single-sided testing of SMD PCBs Manufacturer: ELABO Model / Type: 99-9Z ZM 107011 Serial No.: SN0064623 Year of manufacture: 2004 Without two-hand control panel The machine originates from a production shutdown. You will receive the machine exactly as pictured, without any functional guarantee. For your safety and ours: Please make sure to take advantage of the opportunity for inspection.

Year of construction: 2004, condition: used, camera test system cybernetics for housing parts with camera illumination system and computer, year of manufacture: 2004, price: 1.400 €, contact person: Mr. Rainer Eckerle Lsdpfxj Eurks Am Nsaa

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Benefits of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid swelling during mixing without ice + Smoother doughs thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing unit + Water-carrying parts are made of stainless steel and are maintenance-free + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Consistently low water temperatures + High-performance refrigeration units + Cooling systems with expansion valve + Electronic ice bank controller + Stainless steel cooling evaporators + Multi-stage stainless steel water heat exchangers + Insulated stainless steel ice water tank + Drain cock in ice water tank + High flow rate + Compact dimensions + Easy-care surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: - 3-way switching valves --- For water mixing and dosing units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 70 liters Laodpfxeivdv Dj Am Noa - Continuous output*: 230 liters / hr - Peak cooling output*: 500 liters / hr - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Electrical connection: 400 V - 50Hz - 1Ph - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow at 2 bar: 25 liters / min - Dimensions: 1170 x 630 x 770 mm (LxWxH) - Net weight: 145 kg - Energy consumption at 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Condition: new, Year of construction: 2025, functionality: fully functional, The KM 70/25 C hand-operated sweeper makes cleaning of hard surfaces both indoors and outdoors effective and efficient. The main roller brush and side brushes are battery-powered, significantly increasing operator comfort: users can easily sweep corners and hard-to-reach areas with much less physical effort. The foam filter with passive suction minimizes dust generation and keeps the work environment clean. The roller brush can be adjusted in six steps, tailoring cleaning performance to different surface types. A practical storage tray for additional equipment such as buckets or coarse dirt pickers facilitates operation. Tool-free replacement of the side brush and filter also makes maintenance straightforward. The 36 V Kärcher Battery Power battery platform provides ample power in any situation. The removable battery is easy to take out for convenient transport. The machine is supplied with two batteries and a charger. Technical specifications: - Working width with two side brushes: 980 mm - Container volume: 20 liters Laodpfx Ajxf Hn Aem Nja - Area performance: 3,920 m²/h

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 58226018400020, Weiss Temperature Chamber Type: WT11-270/70/10 Section No.: 58226018400020 Control: Simcon/32-NET Version: 00.1902 Ports: Left (2x) NW 50 mm, Right (3x) NW 125 mm Temperature Range: -70°C to 180°C Test Chamber Volume: 270 liters Door with window, interior lighting Water-cooled temperature chamber Compressed air dryer type: ZANDER Temperature change rate cooling: 10 K/min Ljdpfx Asv T Tncom Noaa Temperature change rate heating: 10.0 K/min Temperature deviation over time ± 0.1 to ± 0.5 K Temperature homogeneity over space ± 0.5 to ± 2.0 K Test Chamber Dimensions: Width 580 mm x Depth 615 mm x Height 750 mm Housing dimensions: Width 895 mm x Depth 2080 mm x Height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW, Rated current 26 A Refrigerant: R-404A/R-23

Condition: used, mileage: 183,700 km, power: 125 kW (169.95 HP), first registration: 10/2013, fuel type: diesel, empty load weight: 3,525 kg, overall weight: 6,700 kg, tire size: 225/75 R16, axle configuration: 4x2, wheelbase: 3,750 mm, color: white, gearing type: mechanical, suspension: steel, loading space volume: 3 m³, loading space length: 3,100 mm, loading space width: 2,230 mm, loading space height: 400 mm, number of seats: 5, Equipment: ABS, differential lock, traction control, Engine capacity 2,998 cc Trailer coupling ball Euro EEV1 Payload 3,175 kg Meiller tipper Lashing rings Ledpougk Ubofx Am Njaa Ball coupling Towing capacity 3,500 kg Errors excepted

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 150mm. Auxiliary cylinder: 2 pcs. Ø 60 x 40mm. Auxiliary guide: 2 pcs. Ø 40mm. Motor: 7,5kw. - 11hp. ( IE-3 ) Pump: 18cc. - 26Liter / ASC. Speed : flow 110mm./sec. - return 120mm./sec. - Pressure : 11mm - 5./sec. Installation height: 500mm. Stroke length: 400mm. Table top: 600 x 500 x 80mm. - (with T - grooves) Plunger plate: 600 x 500 x 90mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 7 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) Lsdpfxjmmuq Ie Am Njaa 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Lasdpfjmr Hpcex Am Nsa Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) Lodpsv Si Szefx Am Njaa 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), machine/vehicle number: 4869639, Year of construction: 1990, operating hours: 4,800 h, load capacity: 3,500 kg, lifting height: 4,500 mm, free lift: 1,300 mm, load center: 500 mm, construction height: 2,200 mm, overall weight: 5,690 kg, enginetype: LP Gas, manufacturer: Clark Lodpfxow R D Swj Am Nsaa

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 586, ΜΟΝΤΕΛΟ- C/A4 SCIVOLO 70 ΕΤΟΣ ΚΑΤΑΣΚΕΥΗΣ - 2006 ΑΡΙΘΜΟΣ ΠΛΑΙΣΙΟΥ - 586 ΤΥΠΟΣ ΜΗΧΑΝΗΣ - DIESEL Ledou Nvhzjpfx Am Njaa

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, Length 1.50 m - Lasdpfoch Iv Njx Am Nsa PLC-controlled Formats up to B4 Various distances between carriers possible Preset counter, total counter Control via reading possible (e.g., bundle change)

Condition: used, Year of construction: 1993, Technical details: height of printing: - height of printing: - connection electric: 100-240 V pneumatically operated: min./max.: 4,8/6,9 bar Lajdpfx Amou Nu Tpe Nea The printer is a lower case inkjet printer for contactless mark products. Application: for commercial marking and labeling purposes. The device can print on any surface, any structure, any profile and on any form. (according to the manufacturer) Equipped with two control units. other features: - dimension height: 3.3 - 8.6mm and 1/8 "- 1/3"; Points of reference: 62 digits; - operation is via control unit - equipment with control unit 170i and accessories Control unit 178i dimensions: - machine: L: 600 x W: 650 x H: 1800mm - control units: L: 203 x W: 508 x H: 610mm Sale as is. Without test run! i.D. *

Year of construction: 2022, condition: new, Suction belt with two suction belts Vacuum individually adjustable Speed ​​up to 160m / min Infinitely variable speed Height adjustable also available with other lengths Inkjet base Ledoch Hcaopfx Am Nsaa

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 4385290001, overall weight: 273 kg, fuel tank capacity: 270 l, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 60 dB, Max. Operating pressure: 10 bar Filling capacity: 10 bar: 485 l/min Power supply: 400/50/3 Electric power: 4kW Noise Pressure: 60 dB Tank volume: 270l Weight: 273 kg Year of production: 2019 Drive motor: 380/660 V, 1440 rpm, 5.5 Air chamber volume: 250 l Required space: 1500 x 600 x 1320 mm Weight approx .: 250 kg Lodpfxswq Nzxe Am Njaa

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, feed rate X-axis: 30 m/min, controller model: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cut-off saw unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile trimming unit Manufacturer model: SKF-L Number of motors: 4 Max. machining speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Scraper blade unit Manufacturer model: 08.519 Unit: Glue scraper unit Manufacturer model: 08.521 Lasdpfxoyzy Iwj Am Nea Unit: Brushing unit Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control: ICOS OPEN EQUIPMENT Magazine for coil material Tank for hot-melt adhesive Edge pressure roller unit Pressure by rubberized belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6089

Condition: used, This listing is for the Hamilton Microlab LET M The unit is in full working condition and ready for immediate use A precision liquid handling system designed for automated pipetting and sample preparation. Known for accuracy and repeatability, it supports efficient lab workflows in research and analytical environments. Compact and user-friendly design. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Lasdpfx Ajy Ex Uqjm Noa Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Year of construction: 2008, operating hours: 16,000 h, Equipment: all wheel drive, MAKE: HITACHI MODEL: ZX 170W-3 YEAR: 2008 CE CERTIFIED: YES WORKING HOURS: 16,000 TYRES/UNDERCARRIAGE: 20% POWER: 104 KW ENGINE: ISUZU WEIGHT: 19,040 KG OPTIONS: • CENTRAL GREASING SYSTEM Ledpeytucxsfx Am Neaa • AIR CONDITIONING • HAMMER PIPING • SORTING FUNCTION • HYDRAULIC QUICK COUPLER • BUCKET • ENGCON ROTOTILT • TRIPLE BOOM PRICE IS EXCLUDING VAT KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN NETHERLANDS VAT: NL864089764B01

Condition: excellent (used), mileage: 635,300 km, power: 272 kW (369.82 HP), first registration: 08/2016, fuel type: diesel, tire size: 385/55/22.5, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: intarder, color: silver, driver cabin: day cab, gearing type: mechanical, number of gears: 11, emission class: euro6, suspension: steel-air, total length: 7,170 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, cruise control, differential lock, fog lights, onboard computer, power assisted steering, soot filter, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - High beam headlights - Air horn - Particulate filter - Radio/CD player - Beacon light - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication system - Towing jaw = Additional Information = Technical information Number of cylinders: 6 Engine displacement: 10,837 cc Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/55/22.5; Max. axle load: 9,000 kg; Steering; Suspension: leaf spring Rear axle: Tyre size: 315/60/22.5; Twin wheels; Differential lock; Max. axle load: 11,500 kg; Suspension: air suspension Weights Empty weight: 8,900 kg Payload: 11,600 kg Gross vehicle weight (GVW): 20,500 kg Functional Body brand: HTS 1425.5.130 cable system 14 tons Condition Technical condition: very good Visual condition: very good Identification Registration number: 21-BHN-3 DAF CF370FA 4x2 WITH HTS 1425.5.130 CABLE SYSTEM 14 TONS EURO 5 | L PACKAGE | 370 HP Laedpfx Amew Hqvcj Nsa DRIVE 4X2 WHEELBASE 450 CM DAY CAB WITH AIR CONDITIONING, RADIO/CD PLAYER, 27MC MANUAL TRANSMISSION AIR HORN, BEACON LIGHT, TRAILER COUPLING, TOOLBOX HTS 1425.5.130 CABLE SYSTEM 14 TONS CONTAINER LOCKING SYSTEM CENTRAL LUBRICATION SYSTEM IMMEDIATELY AVAILABLE FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO WATCH VIDEOS OF OUR TRUCKS AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL