Used Traub Tnx 65 for sale (7,118)

Year of construction: 1998, operating hours: 1,339 h, condition: ready for operation (used), Control Unit Brand FANUC Itodpfx Apox D Itwscef Model Series 18i-T Main Drive Number of axis 4 Spindle Speed 4000 RPM Tool taper VDI 30 This 4-axis SCHAUBLIN 65 TM-3 was manufactured in 1998. A robust horizontal turning machine, it features a maximum turning diameter of 380mm and a length of 534mm. With a spindle speed and rotating tool speed both up to 4,000 RPM, and a 12-piece turret with driven tools, consider the opportunity to buy this SCHAUBLIN 65 TM-3 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: excellent (used), axle configuration: > 3 axles, loading space length: 14,600 mm, loading space width: 2,550 mm, loading space height: 880 mm, total length: 14,600 mm, total width: 2,550 mm, total height: 880 mm, suspension: air, tire size: 245 / 70 R17.5, color: blue, Year of construction: 2008, Equipment: tail-lift, Color: Blue Loading capacity: 72,600 kg Loading floor height: 885 mm Extendable Braked Main Features Manufacturer: Goldhofer Model: STZ L6 65/80A Semi Low Loader with Ramps Chassis number: WG0STZL6A80030419 Year of manufacture: 2008 Weights/Loading Capacity Fifth-wheel load: 26,000 kg Axle load: 11,200 kg Total axle load: 6x 11,200 kg = 67,200 kg Gross vehicle weight (GVW): 93,200 kg Unladen weight: 20,600 kg Payload: 72,600 kg Axles Axle brand: BPW Air suspension 1st axle rigid Axles 2 - 6 with hydraulic steering 1st & 2nd axles liftable High/low valve Braking system: WABCO Tyres: 245 / 70 R17.5 Dimensions Length: 14,600 mm Extensions: +7,200 mm Maximum extended length: 21,800 mm Loading floor width: 2,550 mm Height: approx. 885 mm - 925 mm Fifth-wheel height: +/- 1,350 mm Additional Information • PTO operated from truck • Lashing rings • Stake pockets • Partially wooden loading floor • Mechanical landing gear • Hydraulic loading ramps • Extendable loading floor • Rear bumper with lights Iodpjx R Undofx Apcstf • 3.5" king-pin • Central lubrication • "Oversize load" marker boards • Radio remote control • Outriggers • Toolbox on gooseneck = Further Information = General Information Year of manufacture: 2008 Axle Configuration Tyre size: 245 / 70 R17.5 Axle make: BPW Eco Suspension: Air suspension Rear axle 1: Twin tyres; lift axle; max. axle load: 11,200 kg Rear axle 2: Twin tyres; lift axle; max. axle load: 11,200 kg; steered Rear axle 3: Twin tyres; max. axle load: 11,200 kg; steered Rear axle 4: Twin tyres; max. axle load: 11,200 kg; steered Rear axle 5: Twin tyres; max. axle load: 11,200 kg; steered Rear axle 6: Twin tyres; max. axle load: 11,200 kg; steered Weights Unladen weight: 20,600 kg Payload: 72,600 kg Gross vehicle weight: 93,200 kg Functional Body brand: WABCO Loading platform height: 88 cm Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg Isdpfshvan Iex Apcstf INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Isdpetyqhqjfx Apcstf

Condition: like new (used), functionality: fully functional, mileage: 500,000 km, first registration: 02/2017, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,750 mm, fuel: diesel, color: white, emission class: euro6, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, airbag, fog lights, full service history, spoiler, IVECO DAILY 65-17 Insulated van with refrigeration unit ATP certificate Year 02/2017 B driving license Euro 6 Diesel 6-speed manual gearbox + reverse Ijdsyh Hvkspfx Apcstf Engine displacement: 2,998 cc Engine power: 125 kW (170 HP) Wheelbase: 3,750 mm Internal loading area length: 4,150 mm Internal loading area width: 2,100 mm Internal loading area height: 2,100 mm Overall vehicle length: 6,680 mm Gross vehicle weight: 3,500 kg Payload: 2,560 kg Rear axle with twin wheels Mechanical leaf spring suspension Air conditioning ABS Electric windows and mirrors Spoiler Radio 500,000 km

Condition: good (used), Year of construction: 1999, clamping force: 650 kN, Manufacturer: KraussMaffei Kunststofftechnik Munich Model: KM 65-160 C2 Clamping force: 650 kN Machine No.: 641070 Order number: 643883/1 Year of manufacture: 1999 Iedpfx Apeytik Rscotf International size designation: 160 C2 / 65 Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 153 A Main fuse: 160 A Max. motor current: 30 A Machine weight: 3,200 kg Location: Freiburg

Condition: used, mileage: 579,278 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 11/2017, emission class: euro6, color: white, number of seats: 15, Equipment: ABS, air conditioning, * Our internal no.: 1090 * MB Sprinter 516 * Type: City 35 * EVOBUS - ORIGINAL * 2 x AIR CONDITIONING * First registration 11/2017 - EURO 6 * New engine in 05/2024 at 534,162 km (current engine: 45,116 km), repair invoice amounting to approx. 15,000.00 € is available * Complete overhaul of automatic transmission including new torque converter in 07/2024 * Vehicle has dent/damage * Auxiliary heater / stationary heating * Driver's seat heating * LAWO destination display with SicmaControl unit * TFT monitor preparation * Convector heating Iodpfownlhvex Apcstf * Seats with 3-point seat belts * 11 seats * 12 standing places including 4 emergency folding seats or 1 wheelchair space & 2 emergency folding seats * Mechanical fold-out ramp, ... * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * All information without guarantee * We reserve the right of prior sale * We refer to our terms and conditions

Condition: like new (used), Year of construction: 2021, operating hours: 600 h, functionality: fully functional, machine/vehicle number: MT 65 G2, The machine is like new. Itodpfxsyttiqe Apcef

Condition: used, functionality: fully functional, power: 6.3 kW (8.57 HP), fuel type: diesel, empty load weight: 680 kg, Year of construction: 2018, Ammann ARW 65 vibratory roller Year of manufacture: 2018 Itodpfx Aoypakgspcef Hatz diesel engine 6.3 kW approx. 680 kg Drum width: 65 cm Electric start

Condition: used, Year of construction: 2019, operating hours: 4,300 h, Equipment: all wheel drive, * Wacker Neuson EW 65 wheeled excavator * Year of manufacture: 2019 * 4300 operating hours * 7290 kg Iedpfxsyq A H Ts Apcetf * 45.5 kW Perkins engine * 30 km/h * Hydraulic Powertilt quick coupler * 3 buckets: 125, 60, 40 cm * All hydraulic lines * Air conditioning * Central lubrication * Camera * Particulate filter * Track width approx.: 208 cm

Condition: used, functionality: fully functional, power: 64 kW (87.02 HP), overall weight: 10,400 kg, empty load weight: 7,435 kg, Year of construction: 2011, operating hours: 1,100 h, HAMM DV65 VO tandem roller Year of manufacture: 2011 1,100 operating hours 7,435 kg - 10,400 kg Spreader connection Edge cutter wheel Ijdpfxoykn Ntj Apcetf All steering modes Working width up to 275 cm

Condition: ready for operation (used), Year of construction: 1986, A fully automatic hot stamping press Oropress for gold and silver hot stamping is available. Press force: 5t, sliding table dimensions X/Y: 250mm/250mm, die dimensions X/Y: 120mm/200mm, max. operating temperature: 250°C. A rotary switch of the machine is missing and the adjustment is carried out using a screwdriver. One tension roller was repaired with a new flange bearing. Including foil feed unit. An on site inspection is possible. Iedpjyr Rwpefx Apcetf

Condition: ready for operation (used), Year of construction: 1996, number of axes: 2, This Gildemeister MF twin 65 was manufactured in 1996. It features two turrets, each with 12 tool positions, all motorized-capable, and includes 14 driven tools and 14 tool holders. The machine boasts both spindles in very good condition and a bar passage of 65 mm, complemented by a Cucchi Pietro bar feeder. Contact us for more information about this machine. • 2 turrets (12 + 12 tool positions), all motorized-capable • Bar passage: 65 mm • Both spindles in very good condition • New hydraulic/power unit pump Additional equipment • Cucchi Pietro bar feeder • 14 driven tools • 14 tool holders Ijdpfxoyaqr As Apcstf

Condition: ready for operation (used), Year of construction: 2014, operating hours: 100 h, spindle speed (max.): 5,000 rpm, total height: 1,800 mm, overall weight: 2,200 kg, controller manufacturer: FANUC, controller model: 31t- Model B, number of axes: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine. Iodpfx Apex D H Sfscjtf Additional equipment • Automatic bar loading magazine with adjustable part length and bar diameter • Remnant extraction system • Guide channel made of polyurethane plastic • Displacement system for longitudinal movement Machine Benefits Qualitative Machine Benefits • No spindle reduction required Technical Machine Benefits • Cooling: thermocompensation system • Axes: c-axis and y-axis • System: linear guide system, digital drive system • CATCHING DEVICE Pneumatically operated precast catching device for the gentle unloading of precast elements. The precast elements are transported into a catching box (standard) or onto a conveyor belt (optional). Max. precast element length: 175 mm Max. precast element diameter: 65 mm Max. • Tool system: 12-position tool turret, vdi30 radial • Driven tools: up to 12 driven tools • Sub-spindle speed range: 0–7000 rpm • Bar length capacity: 1200 – 3200 mm • Diameter passage: 20 – 65 mm • Feed speed: 0 – 627 mm/sec • Turning length is 650mm Extra Information Control Unit Control: Integrated PLC Features: Fully automatic work cycle, Monitoring and error diagnostics (display output) Tools Max Power: 6.7 kW Max Torque: 25 Nm Speed Range: 0–5000 rpm C-Axis: Available Media Power Supply: 200/220/400 V AC Air Requirements: Min. 7 bar Air Consumption: 45 L/min Mount Position (Assembly) Installation Kit includes vibration-absorbing, height-adjustable leveling shoes, and mounting brackets. Machine History Note: Machine like new with only 100 hours of use Dimensions Machine Depth 4500 mm

Condition: ready for operation (used), Year of construction: 2020, number of axes: 3, This 3-axis Wenzel LH 65 was manufactured in 2020. It features a CNC control system with active damping, a PH6M/TP200 scanning head, and a base plate measuring 600 x 500 x 25 mm. The machine includes an 18-piece set of M2 styluses, quick-change magazines, and microfilter for solids filtration. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 65 CMM machine we have for sale. Contact us for further details. • 3D Coordinate Measuring Machine • Generation: New Generation 2 • Accuracy class: PREMIUM Accuracy • Active damping system • CNC control: 3-axis Basic-CW • Included software: WM | QUARTIS GEO-L, WM | QUARTIS EMD, WM | QUARTIS IPH, WM | QUARTIS PRC • Probe head: PH6M / TP200 scanning head Additional equipment • 18-piece M2 stylus set with case Isdpfx Aeylm Hgopcjtf • Reference ball • 2x SCR200 quick-change magazines • Base/fixture plate 600 x 500 x 25 mm • 5x TP200 SF modules • Microfilter for solids filtration

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, overall weight: 620 kg, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle Itsdex D E Hbopfx Apcof • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: ready for operation (used), Year of construction: 2020, operating hours: 22,380 h, spindle speed (max.): 5,000 rpm, spindle motor power: 24,000 W, total height: 1,990 mm, overall weight: 7,500 kg, controller manufacturer: SIEMENS, controller model: 840D-SL, number of axes: 7, This 7-axis SPINNER TTS 65-DUPLEX horizontal turning machine was manufactured in 2020. It features a spindle bore of Ø65 mm, a chuck diameter of 210 mm, and a maximum spindle speed of 5000 rpm. The machine includes a 3-meter bar loader, enhancing its productivity. With rapid traverses of 30 m/min and an acceleration of 0.5 g, it ensures efficient operations. If you are looking to get high-quality turning capabilities, consider the SPINNER TTS 65-DUPLEX machine we have for tact us for more information. Additional equipment • Coolant Tank Volume: Approximately 200 liters • Hydraulic Tank Volume: Approximately 120 liters Iodpfsx D Itkex Apcotf • Central Lubrication Unit Volume: Approximately 2 liters • Operating Current (IB): 76 A • Rated Current of Protection Device (IN): 80 A Machine Benefits Technical Machine Benefits • Acceleration: 0. 5 g • Spindle nose: a6 type • Chuck diameter: 210 mm • Maximum torque: 151 nm / 115 nm (s3 40% / s1) • Coolant tank volume: approximately 200 liters Extra Information Travel Paths: X1, X3: 180 mm X2: 180 mm Y1, Y3: ±45 mm Z1, Z3: 704 mm Z2: 620 mm E2: 720 mm // Accessories: -4x Tool holders, straight, left-right square mount, external coolant -4x Machine Interface:BT45A Tool Holder:Ø 32 mm Coolant Supply:IK 80 bar Functional Length (LF): 85 mm Overhang Length (LPR): 110 mm Functional Width (WF): 59/21 mm -1x Milling Head: 90° / BMT 45 / Spinner No. 125548 / ER 25 Description: Angled milling head / BMT45 / ESX-25, dual-spindle (right and left) Spinner flat coupling ER25, max. speed: 6000 rpm, i=1:1 Enhanced version with center height of 85 mm -1x Parting Tool Holder Universal rotation direction External coolant supply Dimensions Machine Depth 2880 mm

Year of construction: 2000, condition: ready for operation (used), A Schmalz vacuum hose lifter is available: load capacity: 65kg, load capacity at 90°: 40kg, lifting hose diameter: 160mm, max. lifting speed: 60m/min, lifting height: 1700mm. An on-site inspection is possible. Iedpfoyrg Ikjx Apcstf

Condition: used, mileage: 70,275 km, power: 390 kW (530.25 HP), first registration: 06/2021, fuel type: diesel, axle configuration: 8x8, wheelbase: 4,800 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 5,950 mm, loading space width: 2,470 mm, loading space height: 1,460 mm, Year of construction: 2021, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Remote central locking - Pintle hook - Hub reduction - PTO (Power Take-Off) - Radio - Reversing camera - Sun visor - Auxiliary heater - Toolbox = Notes = Mercedes-Benz Arocs 3253 8x8 Full spring suspension. 2 sets of tyres. Road: 385/65R22.5 315/80R22.5 Off-road: 14.00R20 Copma 650.6 Jib with 6 extensions. Winch. Front outriggers. Scanreco radio remote control. Personnel basket. Lifting capacities: 2.00 m - 27,520 kg 4.30 m - 12,800 kg 5.95 m - 9,070 kg 7.70 m - 6,840 kg 9.55 m - 5,380 kg 11.40 m - 4,420 kg 13.50 m - 3,680 kg 15.60 m - 3,160 kg 2 x manual extension 18.71 m - 1,720 kg 20.11 m - 1,520 kg 21.75 m - 1,240 kg 23.46 m - 1,000 kg 25.19 m - 870 kg 26.96 m - 800 kg 28.76 m - 720 kg 80 cm hydraulic extension on loading platform. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Drum brakes Suspension: Leaf suspension Front axle 1: Steering Ijdsynlnhepfx Apcstf Front axle 2: Steering Weights Empty weight: 24,855 kg Payload: 12,145 kg Gross vehicle weight: 37,000 kg Functionality Crane: Copma Financial Information Price: On request Identification Type number: AROCS 3253 8x8 / 65 t/m CRANE + = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Govorim po russki. We strive to provide accurate information, however, no rights can be derived from the posted texts.

Condition: good (used), Year of construction: 2010, tire size: 385/65-R22.5, = Further Options and Equipment = - Anti-lock braking system (ABS) - BPW axles - EBS (Electronic Braking System) - Rear doors - Air suspension - Spare wheel - Sliding roof - Drum brakes = Notes = 10x used trailer tyres (385/65-R22.5) on rim = Further Information = General Information Year of manufacture: March 2010 Technical Information Part suitable for: trucks Height: 400 cm Wheelbase: 894 cm Axle Configuration Tyre size: 385/65-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 56%; Tyre tread right: 56% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 38%; Tyre tread right: 88% Itsdpfswm Icgex Apcsf Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Functional Cargo space dimensions: 1,364 x 249 x 280 cm Cargo capacity: 95,098 l Body brand: Krone SD Sliding roof: Yes Condition Technical condition: good Optical condition: good Financial Information Price: To be agreed VAT/margin: VAT deductible Further Information Contact Arne Honingh for more information.

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Iedpfx Aswym Nfepcotf Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: new, Cesurbend Mandrel Bending Machine / Tube Bending Machine PBNC-65 Technical Specifications Max. Tube Diameter (mild steel): 63 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Min. Bending Radius (mm): 45 Tube Length (mm): 3500 Bending Tolerance (mm): ± 0.25 mm Bending Motor Power (kW): 7.5 Itedext Rdwjpfx Apcef Hydraulic Motor Power (kW): 4 Oil Tank Capacity (L): 50 Machine Width (mm): 1450 Machine Length (mm): 4250 Machine Height (mm): 1200 Machine Weight (kg): 1600 Features • 4-way adjustable gauge • Chain bending system • Gear motor • Touchscreen control panel • Foot pedal operation • Hydraulic mandrel movement • Hydraulic damping function • Hydraulic compression function • Hydraulic pusher • Four cylinders • 7" touch color display • 15 sequential twist positions • 100 program memory capacity • Omron PLC control

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-65 A Technical Specifications Max. tube diameter (mild steel) 63 mm Max. wall thickness (mm) 3 Max. bending angle (°) 190 Tube bending speed (d/min) 7-10 Max. hydraulic pressure (bar) 200 Max. bending radius (mm) 250 Min. bending radius (mm) 45 Ijdpfx Ajxvzt Ujpcstf Tube length (mm) 4000 Bending tolerances (mm) ±0.25 mm Bending motor power (kW) 7.5 Hydraulic motor power (kW) 4 Oil tank capacity (l) 50 Machine width (mm) 1500 Machine length (mm) 6200 Machine height (mm) 1500 Machine weight (kg) 2000 Features • The machine is equipped with 5 cylinders • On our standard NC machines, positioning and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend faster and error-free by monitoring the progress and rotational positions of bends carried out with our machines equipped with an NC Car System.

Condition: new, Ostas profile ring bending machine OPK 65 Technical specifications: - tool holder, shaft: 60mm - tool: 175mm - working speed: 5m/min - Engine: 3kw - Dimensions L-W-H: 900x1250x1200mm - weight: 1080kg - 3 rollers driven Iedpfofig Aiox Apcetf - Hardened standard rollers - Hardened and ground tool holder, shaft - Mobile control panel - Horizontal and vertical working position - Side angle guide rollers - Digital displays (2pcs.) - Brake motor - According to CE-Norm

Condition: ready for operation (used), Year of construction: 1996, Make: SPINNER Type of machine: TC 65 Year of manufacture: 1996 Iedpexg Td Hofx Apcjtf Control system: Siemens 820 T Machine's weight: 4,5 t Tool holder: VDI 20 x-travel: 200mm z-travel: 500mm Speed range: 4000 1/min Overall dimensions: 1,7 x 2,2 x 1,7 m Tool turret - slots: 16 Pl. C-axis: 0,001 Grad Spindle opening: 65 mm