Used Trime Construction Equipment for sale (51,544)

Condition: ready for operation (used), Year of construction: 1995, functionality: unexamined, total length: 1,860 mm, total height: 1,500 mm, total width: 800 mm, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 12 kW (16.32 HP), input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Thermal Shrink Tunnel HV 400 - Used machine, built in 1995 - Inspected, tested, and fully operational This high-performance shrink tunnel is designed for energy efficiency. The heating system and adjustable settings are highly variable, allowing for precise shrinking of film-wrapped products with various shapes and contours. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable upper and lower heating. The machine is equipped with an electronic temperature controller and is designed for a maximum internal temperature of up to 250 °C. The conveyor speed is infinitely variable. Technical data Passage width: 400 mm Passage height: 130 mm Hood length: 1,000 mm Dedpfoy H Dxksx Ad Nekl Conveyor length: 1,860 mm Rod conveyor: Rotating rods with silicone coating, every second rivet fitted Power supply: 380 V three-phase, 50 Hz Heating capacity: Selectable from 2 - 10 kW Connected load: 12 kW Color: Hammertone light grey Additional equipment: Temperature control with electronic regulator and contactless relay for precise temperature consistency Pressure rollers at the discharge end

Condition: ready for operation (used), Year of construction: 1998, functionality: unexamined, total length: 1,860 mm, total height: 1,400 mm, total width: 950 mm, Thermal Shrink Tunnel HV 401 LD - Used unit, year of manufacture approx. 1998 - Tested and operational The high-performance shrink tunnel is built in an energy-saving design. Thanks to its flexible heating system and adjustable settings, the machine can reliably shrink-wrap products of various contours with film. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable top and bottom heat. It is equipped with an electronic temperature control system and is designed for a maximum internal temperature of up to 250°C. The conveyor speed is infinitely adjustable. Technical data Passage width: 400 mm Passage height: 150 mm Dedjy H Dtuspfx Ad Nokl Hood length: 1,700 mm Conveyor length: 2,100 mm Rod conveyor: covered with Teflon mesh (as shown in the photos) Power supply: 380 V three-phase, 50 Hz Heating capacity: adjustable from 2 – 10 kW Rated connected load: 12 kW Color: light grey hammer finish Additional equipment: Temperature control with electronic controller and contactless relay for precise temperature stability

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, total length: 3,200 mm, total height: 1,500 mm, total width: 1,020 mm, type of input current: three-phase, product height (max.): 80 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 320 mm, product width (min.): 150 mm, input voltage: 400 V, input current: 5 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 360 mm, passage height: 100 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), Packaging Machine Series Wrapper S 1732 with Conveyor Belt - Used equipment, year of manufacture: 2009 The machine is equipped with a photoelectric control system that adjusts the working cycle according to the length of the product to be packed. This allows products of varying lengths to be packed in any sequence. The machine's height and side adjustments can be made in seconds via a handwheel. Operating Principle: The machine operates in cycles, fully automatic, with photoelectric control. Products to be packed are fed into the machine via a special infeed conveyor and are sealed on all four sides. Oil-hydraulics ensure precise operation of the sealing unit. The sealing process uses an impulse-separation welding method and can be fitted with additional specialized sealing elements. An accurately adjustable, stepless temperature control of the sealing tools prevents unwanted odors. Operating Speed: The actual production speed and effective net output depend on the format, type, and composition of the products and can reach up to 1,500 packages per hour. Standard Features: - Special rewinding unit for film waste - Film waste monitoring - Hydraulically operated sealing plungers - Photoelectric control of product length - Continuous longitudinal sealing (endless) - Impulse sealing with adjustable pre-heating for separation seams - Cycle-controlled cross sealing - Special configurations for precise film and product conveyance - Stepless height and side adjustment - Broadly designed and adjustable electrical controls for sealing temperature, sealing impulse, sealing time, and film control - Standard safety equipment The machine complies with VDE and all safety regulations. Working width: 170 - 320 mm, stepless side adjustment Product height: max. 80 mm, depending on product, format, film quality, and thickness Power supply: 380 V three-phase, 50 Hz Dksdpfx Aoy H Dqtsd Njl Connected load: 3 kW Colour: cream-white Additional Equipment: - 1 special infeed conveyor integrated into the machine • Height and side adjustable • Belt length: 1,500 mm • Belt width: 150 mm • With stop motor and laterally adjustable guide rails - 1 plug-in axle film supply rack • Expanding mandrel with mechanical clamping device for upper and lower film • For smooth film feed, suitable for film thicknesses from 12 µm • Max. roll diameter: 300 mm • Min. core inner diameter: 76 mm

Condition: refurbished (used), functionality: fully functional, total length: 3,200 mm, total height: 1,500 mm, total width: 1,020 mm, type of input current: three-phase, product height (max.): 80 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 320 mm, product width (min.): 150 mm, input voltage: 400 V, input current: 5 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 360 mm, passage height: 100 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), Packaging Machine Serial Packer S 1732 - Used machine, year of manufacture: overhauled The machine is equipped with a photoelectric control system that regulates the operating cycle according to the length of the product to be packed. This allows items of varying lengths to be packaged in any sequence. Height and side adjustments can be made in seconds via a handwheel. Operating principle: The machine operates in cycles, fully automatic, with photoelectric control. Products to be packaged are fed into the machine via a special infeed conveyor and are four-sided sealed. An oil-hydraulic system ensures precise function of the sealing unit. Sealing is done using the impulse/tape-sealing process and can be equipped with additional special sealing elements. With precise, infinitely variable temperature control of the sealing tools, odor emissions are avoided. Working speed: Actual production speed and effective net output depend on the format, type, and arrangement of the products, and can reach up to 1,500 packs per hour. Standard features: - Special take-up device for film waste - Film waste monitor - Hydraulically operated sealing pistons - Photoelectric product length control - Continuous endless longitudinal sealing - Impulse sealing with adjustable preheating for separating seam - Cycle-controlled cross sealing - Special designs for precise film and product transport - Infinitely adjustable height and side settings - Broadly designed, adjustable electrical controls for sealing temperature, sealing impulse, sealing time, and film control - Standard safety features The machine complies with VDE and safety regulations. Dedpfx Adey H Dhfs Nekl Working width: 170 - 320 mm, infinitely adjustable sideways Product height: max. 80 mm, depending on article, format, film quality, and thickness Power supply: 380 V three-phase, 50 Hz Connection rating: 3 kW Color: hammer-tone paint, light grey Additional equipment: - 1 piece special infeed conveyor built into the machine, height and side adjustable Belt length: 1,500 mm Belt width: 150 mm with stop motor and laterally adjustable guide rails - 1 piece plug-in axle film roll holder Expanding shaft with mechanical clamping device for top and bottom film For smooth film feed, suitable for films from 12 μm thickness Max. roll diameter: 300 mm Min. core inside diameter: 76 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 19 kW (25.83 HP), input frequency: 50 Hz, nominal power: 19 kW (25.83 HP), heating capacity: 18 kW (24.47 HP), Beck Packautomaten HV601 HPLS Year of manufacture: 2008 Pass-through width: 600 mm Pass-through height: 420 mm with pressure rollers at the outfeed Transport rods: 15 mm with 19 mm silicone coating Rod pitch (center to center): 38 mm Hood length: 1700 mm Overall length: approx. 2100 mm Conveyor speed: infinitely adjustable Connected load: 19 kW Dkodpfx Asy H Ddasd Nol As shown in the photos

Year of construction: 2017, operating hours: 293 h, condition: used, For further information, please contact Tobias Ebert. Dodpsy In T Iofx Ad Nskl

Condition: used, functionality: fully functional, empty load weight: 16,000 kg, maximum load weight: 22,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 10/1997, loading space length: 13,290 mm, loading space width: 2,540 mm, Year of construction: 1997, Semi-trailer COMETTO SS38AP Telescopic low-loader, 13.29 m extendable to 16.79 m 3 axles Air suspension Gross vehicle weight 38,000 kg – payload 22,000 kg Dsdpfx Aoy Nkvzed Nskl Export net price: €23,500.00 All information provided without guarantee / subject to errors and change.

Condition: excellent (used), Year of construction: 1996, The machine was only used for demonstrating to students in the brewing school. Like new. Dkedpfx Adoy It Evo Nol

Condition: good (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, input frequency: 50 Hz, heating capacity: 1.2 kW (1.63 HP), Packaging machine Minipack Minima Chamber shrink wrapping machine Minipack with base frame Capacity up to 250 cycles/hour Dkodpfx Aoy Ik A Esd Nsl Connection 230 V Used machine Visit our large showroom!

Condition: new, neu ca. 2 Wochen ab Auftragse 5442 € 105.03 € 4536 € 28 mm Accessory set consisting of: 14 pcs. screw clamp180° HIS28Z3000 8 pcs. screw clamp45° HIS28Z3045 6 pcs. V-support HIS28VP100 30 pcs. quick clamping bolt shortHIS28SB100 6 pcs. connection bolt HIS28BS100 4 pcs. mangnetic bolt HIS28MB100 8 pcs. stop rail 150mm HIS28FA150 8 pcs. stop rail 225mm HIS28FA225 2 pcs. stop rail 500mm HIS28FA500 6 pcs. stop angle 175mm HIS28WA175 1 pc. stop angle 325mm HIS28WA325L 1 pc. stop angle 325mm HIS28WA325R 1 pc. support angle 600mm HIS28W600L 1 pc. support angle 600mm HIS28W600R Dodpeyq Sumsfx Ad Nekl 1 pc. support angle 800mm HIS28W800L 1 pc. support angle 800mm HIS28W800R 1 pc. cleaning brush Nylon HIS28RB 1 pc. torch holder HIS28BH 1 pc. tool cart HIS28WW1000 and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L)

Condition: new, neu ca. 2 Wochen ab Auftragse 3165 € 2754 € 28 mm Accessory set consisting of: 8 pcs. screw clamp 180° HIS28Z3000 4 pcs. screw clamp 45° HIS28Z3045 4 pcs. V-support HIS28VP100 20 pcs. quick clamping bolt short HIS28SB100 4 pcs. connnection bolt HIS28BS100 2 pcs. manetic bolt HIS28MB100 4 pcs. stop rail 150mm HIS28FA150 6 pcs. stop rail 225mm HIS28FA225 4 pcs. stop angle 175mm HIS28WA175 2 pcs. stop angle 275mm HIS28WA175275 1 pc. stop angle HIS28WA325L 1 pc. stop angle HIS28WA325R 1 pc. support angle 800 HIS28W800L Dkodpfxsyq Sq Ij Ad Nol 1 pc. support angle 800 HIS28W800R 1 pc. cleaning brush Nylon HIS28RB 1 pc. torch holder HIS28BH and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L) OPTION: Tool cart HIS28WW1000 € 545,--

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2590 € 2255 € 16 mm The set for everyday and universal use with an extensive range of clamps, brackets and clamping options. Including tool trolley for an optimised and fast workflow. Dedpfoyq Sqhox Ad Nekl Consisting of: 10 screw clamps 180° HIS16Z3000 4 screw clamps 45° HIS16Z3045 4 V-support HIS16VP100 8 stop brackets 90x37, 5mm HIS16WA9037 8 pieces stop bracket 90x90mm HIS16WA9090 2 pieces stop bracket 300mm HIS16WA300 1 piece stop bracket 500mm HIS16WA500L 1 piece stop bracket 500mm HIS16WA500R 4 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 28 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH 1 piece cleaner HIS- Cleaner-1L 1 piece Anti-stick agent HIS-Premium-1L

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1725 € 1485 € 16 mm The extended entry level with added value in the set configuration for the most common work steps and applications. Consisting of: Dkjdpfx Aeyq Sqbsd Njl 8 screw clamps 180° HIS16Z3000 2 screw clamps 45° HIS16Z3045 2 V-support HIS16VP100 4 stop brackets 90x37, 5mm HIS16WA9037 6 pieces stop bracket 90x90mm HIS16WA9090 2 pieces stop bracket 300mm HIS16WA300 2 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 20 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH 1 piece cleaner HIS-Cleaner-1L 1 piece anti-adhesive agent HIS-Premium-1L OPTION: Tool trolley HIS16WW1000 € 449,--

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, The Eriez drum separator comprises a magnetic element mounted on a steel shaft to form a magnetic assembly, which remains stationary during operation. The magnetic assembly is completely enclosed within a rotating cylindrical shell made of stainless steel. Dksdsy Hh Upspfx Ad Nol

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: FN531056, load capacity: 1,000 kg, empty load weight: 2,727 kg, lifting height: 3,810 mm, construction height: 2,430 mm, operating hours: 239 h, Jungheinrich EKS 210 high-lift order picker, year of manufacture 2017 with duplex mast Dodpfsy H Exrox Ad Nekl Specifications: Jungheinrich EKS 210 Year of manufacture: 2017 Recorded operating hours (h): 239 Mast type: Duplex Lift height (mm): 3810 Free lift (mm): 850 Overall height (mm): 2430 Load capacity (kg): 1000 Fork length (mm): 900 Own weight (kg): 2727 Front tyres: Polyurethane Rear tyres: Polyurethane Battery year: 2017 Battery capacity (Ah): 465 Battery voltage (V): 48

Condition: refurbished (used), functionality: fully functional, pressure: 2 bar, temperature: 131 °C, power: 45 kW (61.18 HP), usable tank capacity: 60 l, Equipment: type plate available, The Symex CML 500 is a high-performance vacuum homogenizer mixer designed for producing demanding products in the pharmaceutical and cosmetics industries. This system combines mixing, dispersing, homogenizing, heating, cooling, and vacuum processing in a closed unit, enabling precise and reproducible production—from pilot scale to industrial applications. Such systems are specifically engineered for complex processes with stringent quality requirements. Technical Highlights of the Symex CML 500: Tank - Usable volume: approx. 500 liters - Total volume: approx. 780 liters - Minimum volume: approx. 125–160 liters - Product space pressure range: -1 / +2 bar - Product temperature: up to approx. 133 °C - Heating jacket: up to +4 bar / 151 °C - Design in accordance with AD 2000 - The tank is fully pressure and vacuum-resistant, ensuring safe operations under demanding conditions. Agitator - Anchor agitator with flow breakers - Speed range: approx. 11–66 rpm - Power: approx. 7.5 kW - Frequency-controlled - Designed for highly viscous products - The agitator provides uniform mixing and optimal heat transfer. Homogenizer - Power: approx. 16–20 kW - Speed: up to approx. 3,000 rpm - High shear performance for fine dispersion - Rotor/stator system - The homogenizer ensures stable emulsions and reproducible product quality. Vacuum System - Operation under vacuum possible - Liquid ring vacuum pump (external) - Pressure and vacuum monitoring - Vacuum operation significantly reduces air entrainment and improves product quality. Heating & Cooling - Double-walled vessel (2-zone heating) - Precise temperature control - Even heat distribution - CIP system Multiple CIP Connections - Rotating spray heads (360°) - Cleaning of the entire process chamber, including pipelines Dkjdoy Hq I Sjpfx Ad Nol Material Feed - Direct suction of liquids and powders - Feed into the homogenizer area - Fast and low-loss processing - These integrated feeding and circulation systems enable highly efficient process management. Additional Equipment - Hydraulic lid lifting device - Multi-nozzle with several connection options - Sight glass with double wiper - Vessel lighting - Dosing vessel (approx. 8 liters) - Sampling valve - Membrane and disc valves - Circulation piping for homogenization and CIP Control & Operation The system features a modern operation concept: - Touch panel control - Adjustable speed and cycle times - Process monitoring (pressure, temperature, speed) - Automatic and manual operating modes - Alarm and safety functions Advantages of the Symex CML 500 - Combination of all process steps in one unit - High process reliability through enclosed design - Reproducible and stable product quality - Suitable for highly viscous and sensitive products - Hygienic design (GMP-compliant) - Flexible application for different batch sizes Delivery & Handling - Delivery ex works - Turn-key project available (incl. commissioning) - International shipping possible

Condition: good (used), machine/vehicle number: 3514, total length: 14,700 mm, total width: 2,460 mm, Year of construction: 2007, operation weight: 12,500 kg, load capacity: 90,000 kg, Liftec LTH90 from Uniktruck Wheel type – Steering wheel: Supersoft Wheel size – Steering wheel: 645/250-4100 Dodpfx Ajyuimbsd Nskl

Condition: good (used), machine/vehicle number: 3046, total length: 14,850 mm, total width: 2,230 mm, Year of construction: 2012, operation weight: 12,600 kg, load capacity: 90,000 kg, Liftec LTH90 from Uniktruck Wheel type – Steering wheel: 350 Wheel size – Steering wheel: 645/250-410.0 Dodpfx Adsyuh Hyj Njkl

Condition: good (used), machine/vehicle number: 2956, total length: 12,670 mm, total width: 2,600 mm, Year of construction: 2023, operation weight: 7,600 kg, load capacity: 100,000 kg, Seacom RT40-100T from Uniktruck Djdpfx Aoyuhzwod Nskl Wheel type – Steering wheel: 350 Wheel size – Steering wheel: 22 x 16 x 16

Condition: good (used), machine/vehicle number: 2955, total length: 12,670 mm, total width: 2,600 mm, Year of construction: 2023, operation weight: 7,600 kg, load capacity: 100,000 kg, Seacom RT40-100T from Uniktruck Wheel type – Steering wheel: 350 Dkedpfx Adoyuhzqj Njl Wheel size – Steering wheel: 22 x 16 x 16

Condition: good (used), machine/vehicle number: 2954, total length: 12,670 mm, total width: 2,600 mm, Year of construction: 2023, operation weight: 7,600 kg, load capacity: 100,000 kg, Seacom RT40-100T from Uniktruck Wheel type – Steering wheel: 350 Wheel size – Steering wheel: 22 x 16 x 16 Dsdpfsyuhzkex Ad Njkl

Condition: good (used), machine/vehicle number: 2953, total length: 12,670 mm, total width: 2,600 mm, Year of construction: 2023, operation weight: 7,600 kg, load capacity: 100,000 kg, Seacom RT40-100T from Uniktruck Wheel type – Steering wheel: 350 Dedpfx Ajyuhzdjd Nekl Wheel size – Steering wheel: 22 x 16 x 16

Condition: good (used), machine/vehicle number: 2951, total length: 12,670 mm, total width: 2,600 mm, Year of construction: 2023, operation weight: 7,600 kg, load capacity: 100,000 kg, Seacom RT40-100T from Uniktruck Wheel type – Steering wheel: 350 Dodpsyuhy Tsfx Ad Nokl Wheel size – Steering wheel: 22 x 16 x 16

Condition: good (used), machine/vehicle number: 2950, total length: 12,670 mm, total width: 2,600 mm, Year of construction: 2023, operation weight: 7,600 kg, load capacity: 100,000 kg, Seacom RT40-100T from Uniktruck Wheel type – Steering wheel: 350 Dkjdpfxsyuhy Ho Ad Nol Wheel size – Steering wheel: 22 x 16 x 16

Condition: good (used), machine/vehicle number: 2949, total length: 12,670 mm, total width: 2,600 mm, Year of construction: 2023, operation weight: 7,600 kg, load capacity: 100,000 kg, Seacom SEACOM RT40-100T from Uniktruck Wheel type – Steering wheel: 350 Wheel size – Steering wheel: 22 x 16 x 16 Dkjdpfeyuhyyox Ad Nsl