Used Twin-Screw Compounding Extruder for sale (8,044)

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: N32469, National double printing press M68, used, year 1974, Ndjdpfx Aaswiuy Re Rsa

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total width: 2,100 mm, total height: 2,500 mm, total length: 6,000 mm, type of input current: three-phase, input voltage: 380 V, overall weight: 5,000 kg, power: 11 kW (14.96 HP), input frequency: 50 Hz, In working condidion, el motor is replaced with the smaller one for efficiency Ndsdpfxezi A Iys Aa Rea

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, L & Z Lathe WEILER CONDOR B incl. three-axis digital display -CE marking -Machine from an educational institution / very well maintained -Center height 165mm -Swinging diameter over bed 330mm -Swinging diameter over cross slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm -Automatic / longitudinal and cross feeds -Threading / metric / inch, etc. -Bar capacity 40mm -Tailstock / Morse taper MT3 -Multifix base and inserts -Three-jaw chuck 200mm -Electric chuck guard -Spindle cover -2x Emergency stop -Coolant system -Chip guard -Documentation Nedpfszvx A Tjx Aa Roda Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1200 kg Errors and omissions excepted.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 400 kg, total length: 1,800 mm, total width: 700 mm, total height: 1,700 mm, power: 15 kW (20.39 HP), operating pressure: 16 bar, pressure (min.): 6 bar, pressure (max.): 16 bar, noise level: 62 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 15 kW / 16 bar specifically designed for the high demands of laser cutting, providing clean compressed air (also available with 22 kW) complete 4-in-1 unit frequency-controlled servo motor 500-liter pressure tank refrigerant dryer fine filter new machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. highly efficient, permanent magnet servo motor frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color display single-stage screw unit air-cooled durable and low-maintenance optional: also available with an additional adsorption dryer Njdoyll Enspfx Aa Rjda Sales are exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria. technical data (approx.): length: 1.75 m, height: 1.75 m, width: 0.72 m weight: approx. 420 kg pressure: 16 bar flow rate: approx. 1.7 m³/min at 10 bar (1.2 m³/min at 16 bar) noise level: 62 ± 2 dB(A)

Condition: good (used), Year of construction: 2010, operating hours: 85,410 h, power: 15 kW (20.39 HP), Screw compressor Manufacturer: Atlas Copco Type: GA 15P Year of manufacture: 2010 Nsdpfxjzu Aw Es Aa Reda Operating pressure: max. 9.8 bar Volume flow: 2.39 m³/min Power: 15 kW Operating hours under load: approx. 85,410 h Weight: 500 kg Includes refrigerant dryer.

Year of construction: 2002, condition: good (used), functionality: fully functional, An ultra reliable 130 / 160mm OMP Prealpina plastics extruder, supplied by ourselves back in 2002. I have know the extruder history since new as i was the supplying agent originally. Originally supplied to reprocess confectionery Polypropylene films with 100% heavy print on the film , it performed very well in degassing and compounding the plastics materials till that contract expired. The extruder is a cascade version , allowing significant extra gas venting and polymer mixing, by utilizing a second short barrel 160mm extruder to deliver molten and clean plastic to a die face cutter, followed by a centrifuge to dry the pellet. The line has recently been fitted with an ultra efficient FIMIC fully automatic screen filter, providing probably the most efficient filtration available to plastics recyclers. being a cascade configuration , with superior filtration and venting , the line is most suitable for difficult plastics films or fibre recycling. The line has a 7 cu metre silo feeding directly into a force feed conical delivery system to the feed zone of the 130mm extruder. There is a master batch/ additive feeder included. The line was sold to a company in Lituania from its earlier owner in the UK in 2022 , but the plastic feedstock thought to be available in Lithuania never materialised. The line has been stored since, and is still dismantled and able to be shipped immediately to a new buyer. Nsdpjzwhtdjfx Aa Reda

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, L & Z Lathe / Bickenbach LE-20-10-S incl. 3-axis digital display -Very well-maintained, original condition from an educational institution -CE marking -Year of manufacture 2008 -Three-axis digital display -Turning diameter 420 mm -Turning diameter over the carriage 250 mm -Turning diameter in the crotch 580 mm -Turning length 1000 mm -Spindle speed range (gearbox) 20 - 2000 rpm -Spindle bore 58 mm -Tailstock taper MK 4 / quill travel 130 mm -Röhm 3-jaw chuck 250 mm & quick-change jaws -Fixed steady rest -Multifix base holder & 3x inserts -Coolant system -Folding protective device for tool holder -Electric chuck guard -Foot brake Ndsdpfszvpxxox Aa Rea -Swivel machine lamp -Follower (Röhm) -Machine feet -Bed stop -Chip guard -Emergency stop -Operating tool Dimensions: L x W x H 2.1 x 0.8 x 1.7 meters / Weight 1600 kg Errors and omissions excepted.

Condition: used, mileage: 914,666 km, power: 309 kW (420.12 HP), first registration: 01/2006, fuel type: diesel, empty load weight: 7,990 kg, maximum load weight: 10,010 kg, overall weight: 18,000 kg, tire size: 315 / 60 R 22,5, axle configuration: 4x2, wheelbase: 3,550 mm, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro4, suspension: air, total length: 5,790 mm, total width: 2,550 mm, total height: 4,000 mm, number of seats: 2, Equipment: additional headlights, air conditioning, cabin, cruise control, differential lock, low noise, parking heater, seat heater, spoiler, Vehicle location: Bovenden, Opticruise gearbox, Lg. House, Topline, 1x air seat, 2x recliner, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, burl wood decor, center console, electric roof, auxiliary heating, retarder, roof spoiler, side spoiler, lifting+lowering, differential lock, driving lights, work lights, air suspension, low noise G1, environmental badge green Wheelbase: 3550 mm Body: Topline, Lowliner second engine approx. 300,000 km only run, Euro 3 engine with Twin Tec soot filter cat RFK-TT-N10 (PMK 2 green sticker), fifth wheel height 950 mm ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ndjdpsvhhd Ijfx Aa Rsa - .

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Technical details are shown on pictures. Njdpfx Aaezlbzqe Roda

Condition: used, Year of construction: 1993, machine/vehicle number: 36100011, total length: 1,950 mm, total width: 800 mm, total height: 1,500 mm, space requirement length: 2,150 mm, space requirement width: 800 mm, space requirement height: 1,670 mm, power: 22 kW (29.91 HP), fuel type: electric, volume flow: 210 m³/h, operating pressure: 8 bar, pressure (min.): 8 bar, pressure (max.): 8 bar, rotational speed (max.): 4,400 rpm, rotational speed (min.): 4,400 rpm, Equipment: documentation/manual, type plate available, Franz compressed air compressor For sale due to restructuring Njdpfx Aezgchhsa Rsda Fully functional until recently Inspection possible Loading onto a truck is possible

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor Nsdpezu Aibsfx Aa Reda - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, Year of construction: 1987, Twin saw Manufacturer: Hüllhorst Type: DH5 4SR Year of manufacture: 1987 Technical data Working width: 2500 mm Length of support arms: 3350 mm Nodpfx Aaezuynno Roda with 2 x scoring saws and 2 x main saws Note: The technical data and descriptions are a copy of the original order confirmation from that time. The data is for informational purposes only and is not binding.

Year of construction: 2002, operating hours: 1,378 h, condition: good (used), Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Nedpfszuk Tnjx Aa Rjda Other: All documentation available in German The machine was originally used for biomaterials

Condition: good (used), Year of construction: 2013, screw diameter: 38 mm, Brand: Krauss Maffei Technologies GmbH Model: KME 38-30 Screw type: Single screw Year of manufacture: 2013 Screw diameter: 38 mm L/D ratio: 30 Ndedpfx Aozuk Irja Rea It is supplied without a screw and is in very good condition; the machine was never used in production.

Condition: good (used), Year of construction: 1997, functionality: fully functional, OIL-FREE AIR COMPRESSOR Designed to supply oil-free compressed air for low-pressure industrial applications. TECHNICAL DATA Maximum working pressure: 3.5 bar(g) Typical operating pressure: 3.2 bar Input power: 168 / 187 kW Shaft speed: 2,220 / 3,570 rpm Approximate dimensions (L × W × H): 3,000 × 1,600 × 2,000 mm Approximate weight: 4,000 kg Serial number: AIF042384 Nedpfx Aaozvllno Rjda

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 402866, power: 37 kW (50.31 HP), volume flow: 385.8 m³/h, pressure (min.): 10 bar, It is fully functional since bought very few usage. Nodpfszvh Edex Aa Rsda

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input current: 16 A, KUHLMEYER Type ZBS Twin-Belt Grinding Machine Nsdpsza Uhhsfx Aa Rjda - incl. automatic mode and scissor lift table - for rough and fine sanding in a single machine - Machine location: The Netherlands - Further technical specifications, information, and videos of the machine are available upon request.

Condition: excellent (used), 7.5 kW motor 1000 rpm Pressure: 10 bar Nsdpfx Aozvnrwea Roda Tank: 350 liters

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion. Ndsdpozv Ei Hjfx Aa Roa

Condition: good (used), Year of construction: 1993, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Mahle, screw compressor type MSK G11 -Drive power: 11 kW -Volume flow rate: 1.48 m³/min -Max. pressure: 10 bar -Individual components: see photos -Dimensions: 730/690/H1315 mm Ndsdpfezulbtjx Aa Roa -Weight: 291 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, DOOR PRODUCTION LINE CMS PRO EVOLUTION TWIN 60 Year 2011 This machine has a very low number of working hours, wrong investment by client . The machine is connected and can be inspected in Poland at any time after agreement. Ndjdpfxezr H Tfs Aa Rja For all technical information please click below on included PDF document .

Condition: new, Year of construction: 2025, Arjes / Eggersmann Impaktor 250 EVO 2 - incl. 1 set of shafts NEW - Arjes Impaktor 250 EVO 2 with one set of shafts Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight: 14,500 kg Standard engine configuration: Volvo-Penta, Stage V / 129 kW Hook lift Track chassis Overband magnet with discharge container Water spraying for less dust spreading Remote control 1 set of shafts of choice, Shafts installed and incl. quick-change cassette and breaker bars Star shafts (tires, trash, plastic) Concrete shafts (demolition waste, asphalt) Paddle shafts (green waste, wood) Optional on request: - Crushing baskets for concrete and wood - Winding fans Nedpfownpwzsx Aa Roda - Finger screen, disc screen - and more…

Condition: new, Year of construction: 2025, operating hours: 5 h, NEW - Arjes Impaktor 250 EVO 2 with a set of paddle shafts (green cuttings, wood). Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight 14,500 kg Standard configuration Engine: Volvo-Penta, Stage V / 129 kW Hook lift Track drive Overband magnet with discharge hopper Water spraying for reduced dust widening Paddle shafts incl. quick-change cassette Crusher bars Factory paint finish in orange-grey Optional on request: Nodpetql S Tefx Aa Rsda Star shafts (tires, waste, plastic) Concrete shafts (building rubble, asphalt) Concrete crusher basket

Condition: used, Year of construction: 1981, machine/vehicle number: 7295, functionality: fully functional, Canali ML 1100 Machine No.: 7295 Year of manufacture: 1981 TECHNICAL DETAILS Gbe Doyqxt Njkknm Tor Saw blade length min.: 6,350 mm Saw blade length max.: 6,500 mm Saw blade width min.: 90 mm Saw blade width max.: 120 mm MACHINE DETAILS Saw band tensioning: Pneumatic saw band tensioning Njdpeyqxt Njfx Aa Reda Design: Double band saw (twin version)

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l Ndsdpfoh A Sfdjx Aa Roa weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources