Used Ungerer 200/1,3/23 for sale (19,935)

Condition: ready for operation (used), Fanuc A06B-0236-B100 AC servo motor SN: C03XD5286 with A860-2000-T301 pulsecoder SN: 161358030924, used, in good condition, fully functional, scope of delivery as per photos. Gedpfx Alex Dt Elsxjit

Condition: ready for operation (used), Siemens V23401-E2002-B104 resolver SN:R6/920076DZ with connector plug, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. Godpfxjx Dwa Hj Alxoit

Condition: ready for operation (used), Fanuc A06B-0239-B200 AC servo motor SN: C047D6638, used, in good condition, 100% functional, delivery as per photos. Gisdpfjx Dt Exsx Alxot

Condition: ready for operation (used), Siemens 1FT7105-1AC71-1CG1 SN: YF0037231102001 Simotics S synchronous motor, professionally completely overhauled and tested, 100% functional, scope of delivery as shown in the photos. Gjdpfxsx Du Uho Alxjit

Condition: new, Siemens 6GK5216-0BA00-2AA3 XC216 managed Layer 2 IE Switch, firmware version: 15, serial no.: VPP4200723, unused in original packaging, 100% functional, scope of delivery as per photos. Giodpfx Aljx Dxdasxst

Condition: new, Phoenix Contact FL SWITCH LM 4TX/2FX Industrial Ethernet Switch SN:2002362387, unused in opened original packaging, 100% functional, delivery scope as shown in photos. Gisdpfjx Dw R Eox Alxst

Condition: excellent (used), 1 x Fanuc Back Plane 3 Slot A05B-2316-C105 1 x Fanuc A16B-3200-0042/05B900514 Board 1 x Fanuc A16B-1212-0871/17C906140 Power Supply Board Alternative search terms A05B2316C105 Godpfxew Tbyqo Alxeit A16B3200004205B900514 A16B1212087117C906140 A16B-3200-0042 A16B-1212-0871 A16B12120871 A16B32000042 ATTENTION: Higher quantities are available in some cases.

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material. Gisdpfx Ajh R Tvtolxst

Condition: used, functionality: fully functional, machine/vehicle number: 6608941, Year of construction: 2018, operating hours: 4,536 h, load capacity: 2,000 kg, fuel type: electric, construction height: 1,500 mm, fork length: 2,350 mm, drive type: Elektro, Low lift truck Chassis number: 6608941 Condition: Ready for use and fully functional Technical condition: very good Giedsuhxk Topfx Alxet Battery Volt: 24V Description: Toyota LPE200 No.: M0518 Year of construction: 2018 Operating hours: 4536 The device is visually and technically in very good condition. Charger on request. Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All used goods are sold without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site.

Condition: ready for operation (used), Metronic MI64210200-01 control panel - 230 V / 1.0 A / 50 Hz, used, minor signs of use, 100% functional, scope of delivery as per photos Gijdpfx Alstxuhxsxet

Condition: good (used), design: Cutmatic strip width: max. 2.150 mm strip thickness: max. 6 mm Gjdpfowzvlxox Alxsit

Condition: used, machine/vehicle number: Prüfstand Antrieb, performance 0.0540 up to 16.4 KW tension 28 - 420 V speed 10 to 3,000 rpm variable speed motor with - frequency converter Siemens with control SIMOREG K - external fan emergency stop device manual control unit Gsdpedf Ndvjfx Alxoit *frequency converter:* type: SIMOREG K performance 6 KW up to 774 KW  

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, power: 25 kW (33.99 HP), stroke length: 300 mm, throat depth: 500 mm, overall weight: 30,250 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Pilz, controller model: PSS 4000, working width: 6,100 mm, bending force (max.): 200 t, back gauge: 1,000 mm, distance between stands: 5,540 mm, installation height: 660 mm, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, actuation type: hydraulic, Equipment: centralized greasing system, documentation/manual, emergency stop, foot remote control, lower tooling, upper tooling, Lotze press brake, 6100 x 200t, regularly maintained, retrofitted in 2021 with Pilz PLC, type PSS 4000, large throat depth of 500mm, central lubrication, hydraulic clamping, central crowning system, pneumatic die shifting, segmented 300mm press blade, segmented lower die, for sale due to production changeover. Giodew Uykdjpfx Alxot

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Technical data + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. be inspected by appointment. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you. Giedpsudvt Rjfx Alxot

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1800x1200 mm Giedpfxovz E Rrs Alxjt Weight 650 kg Total power requirement 2,2 kw

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Lg.No. 22621 Technical data: Gisdjip Nikjpfx Alxet - max. working length 3500 mm - column passage 3050 mm - max pressing force 2000 kN - max distance table / ram 480 mm - column throat 260 mm - ram stroke approx. 300 mm - Stroke speeds - downward speed idle max. 100 mm/sec - Upward speed 80 mm/sec - Downward press speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - weight approx. 16000 kg - with: - CNC - control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. tool clamping - upper tool + universal die tool - material supports - two-hand control panel

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Water-cooled, pneumatically operated spot welding tongs Nimak L123 Very good used condition, fully functional. Item location is 75053 Gondelsheim See pictures Godpfexmuyvox Alxoit Shipping via freight forwarder or collection

Condition: used, mileage: 19,578 km, power: 169 kW (229.78 HP), first registration: 07/1992, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,280 mm, Equipment: ABS, all wheel drive, Very clean MAN 12.232 fire engine LF16 with 4x4 all-wheel drive Ziegler body 1200 l water tank FPN 16/8 built-in pump with 154 operating hours 30 m quick-action hose 9 seats 6-speed manual transmission 2x differential locks (center and rear) 10Rx22.5 tires Cabin without rust Engine and transmission are dry Various seals on the transfer case and the manual transmission have been replaced Starter batteries replaced, chassis freshly lubricated Ready for immediate use Giedpfxewfbhys Alxet +++ Errors, changes, and prior sale reserved

Condition: used, Year of construction: 2007, clamping force: 120 kN, displacement volume: 154 cm³, injection pressure: 2,177 bar, overall weight: 7,300 kg, load hours: 62,000 h, screw conveyor diameter: 35 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VC Tech + ERC23/1-F Condition: aus laufender Produktion Operating hours: ca. 62.000 CLAMPING UNIT: - Clamping force: 120 t Öffnungsweg: 500 mm Mould installation height min.: 300 mm Mould installation height max.: - Plate dimension (h x v): 790 x 680 mm Centering (fix- movingplate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Injection weight in polystyrol: 141 g Stroke volume: 154 cm³ Einspritzdruck: 2.177 bar CONTROL: CC200 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 Air valves: ja Hot runner control devices: - Robot interface: Engel integrated Godjqxympspfx Alxsit Other equipment: inkl. ERC 23/1-F mit integrierten Ablageband (Bediengegenseite) +750mm, Nadelverschluss (hydr. + pneumat.), Schnittstelle Farbdosierer und Temperiergerät. GENERAL DATA: - Installed heating capacity: 9,2 kW Pump drive power: 15 kW Total installed power: Motor + Heizung Total weight: 7.300 kg Total size L x B x H: 4,4 x 1,4+0,8 x 2,0 m

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption Gedpfx Alowc Rk Esxjit One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: excellent (used), Year of construction: 2004, Krauss Maffei KM 2300 - 12000 MC injection molding machine Year: 2004 Control type: MC 4 Number of operating hours 93 900 Closing unit Clamping force: 23000 kN Mould opening force, max.: 1420 kN Moving platen feed force Opening: 227 kN Moving platen feed force Closing: 203 kN Mould platen size (h x v): 2830 mm x 2400 mm Gijdpfxewq Ed As Alxet Distance between columns (h x v): 2000 mm x 1600 mm Mould opening stroke: 2600 mm Min. mould height: 1100 mm Maximum mould height: 1800 mm Maximum daylight: 3700 mm Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm Ls/D ratio: 23 Injection pressure: 1389 bar Sweep volume: 8588 ccm Shot weight, PS: 7815 g Injection rate: 1019 ccm/s Screw speed: 113 1/min Maximum plasticization rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Nominal pump motor capacity: 132 kW Installed heating power: 997kW Adjustable barrel heating zones: 7 Number of drying cycles: 350 1/h Tank capacity: 2500 ltr. Dimensions and weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143,000 kg Maximum mold weight: 62,000 kg LRX 1000 robot X-axis - 2,000 mm Y-axis - 3,000 mm Z-axis - 5,000 mm

Condition: like new (used), 200 lfm Fachbodenregal Schäfer R3000 Giedpfjdz Agdox Alxot

Year of construction: 2023, operating hours: 300 h, condition: like new (used), functionality: fully functional, Complete System: Bar Former & Topping Unit – The Perfect Starter Kit for Bar Production Performance & Versatility in One System – Ideal for Start-ups or Expanding Production! This high-quality complete system, consisting of a bar former and topping unit, enables efficient and precise production of up to 10,000 bars in just 4 hours. Whether bars, mini bites, or innovative new products – the system offers maximum flexibility with exact portioning and processing. Giodpfsxcv Adjx Alxjt Technical Highlights: - Forming, filling & topping – all in a single operation - Precise dosing for a wide variety of product sizes (from mini bites to standard bars) - Suitable for all viscous masses such as: - Cookie dough - Protein masses - Gingerbread dough - Muesli mixtures, and much more - Production capacity: up to 10,000 units / 4 hours - Operating hours: only approx. 300 hours – in nearly new condition! Your Advantages: - Ready for immediate use – Plug & Produce - Ideal as a starter kit for young brands or for expanding existing lines - Compact design – space-saving & efficient - Robust construction for continuous industrial use - Low-maintenance & easy to clean

Year of construction: 1987, condition: like new (used), machine/vehicle number: 2008, ID AG 11 PEINER GREIFER Producer: Salzgitter Machinen u. Anlagen AG, Salzgitter Bad/Peiner SMAG Lifting Technologies GmbH Year of manufacture: 1987, good condition, Type 6231, Product MMGL2000-4, degree of protection IP44, Voltage 380V, Frequency 50 Hz, Control block OF-519-0-4-15N, Max pressure 180 bar, Load capacity/SWL 1600 kg, deadweight 2030 kg, content 2.0 m3 Gijdpfjhgg Eusx Alxet Mainly used in port operations as well as in waste incineration plants, steelworks and scrap yards The gripper type is suitable for handling scrap, ingots, rubbish, biomass and woodchips, among other things The PEINER grab volume corresponds to the internal volume when the trays are closed - the actual total payload is greater Worldwide service network PEINER are designed for cranes with power supply. Depending on your individual crane equipment, the gripper can either be attached directly to slewing gears or traverses. EFFICIENCY - multi-shell design for various goods handled: Example wood chips: Maximizing the filling volume with the least possible transport loss. Equipped with the latest shell design, PEINER MMGL are ideally suited for handling wood chips. They show perfect penetration, achieve an optimal filling volume and close cleanly. PERFORMANCE - High turnover volumes per loading cycle: Motorized orange peel grabs adapt to the material being handled with their individually driven shells. Transport losses are minimized. Optimal construction height, low center of gravity and the robust construction offer universal application possibilities of the PEINER MMG / MMGL series. PEINER MMG / L have extremely short opening and closing times and thus optimize the number of possible loading cycles per hour. ECONOMIC EFFICIENCY - Low service costs: The maintenance points are easy to reach. In order to increase the operating times and to minimize the service effort, PEINER can be equipped with automatic central lubrication. RELIABILITY - your investment in the future: PEINER are the result of many years of experience in bulk handling, high quality components and modern manufacturing standards. Sales price 9.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8 Gjdpfxohwi U To Alxoit