Used Uniweld Welding Rotary Device 2 Axes for sale (86,508)

Condition: new, table diameter 495 mm table load 300 / 150 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell turning speeds 0,5 - 3,2 U/min spindle bore 65 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt Dcjdpfx Agjl R Nnvsmok Welding turntable with hollow shaft 300kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal

Condition: new, table diameter 690 mm table load 500 / 250 Kg turning speeds 0,5 - 3,2 U/min Torque Drehen 1200 Nm Djdpfxel R Nnye Agmjck spindle bore 100 mm swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall maschinell Kippen 1500 Nm welding current 500 Ampere connected load frequency 230 Volt Welding turntable with hollow shaft 500kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal

Condition: new, table diameter 1000 mm table load 1200 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min max. torque on the faceplate 900 Nm welding current 500 Ampere total power requirement 0,75 + 0,75 kW Dsdovn Uwuopfx Agmjck weight of the machine ca. 0,8 t Welding rotary tilting table - Remote control with cable - 2 x welding current transmission

Condition: new, Table dimensions 1000 x 1000 mm table load 2500 Kg swivelling range 105 Grad turning speeds 0,15 - 2,0 U/min height adjustment 1010 - 1836 mm Dcodpsvn Uypefx Agmek hollow spindle diameter mm welding current 700 Ampere max. torque on the faceplate 5000 Nm total power requirement 6,0 kW dimensions of the machine ca. m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)

Condition: new, table diameter 1400 mm table load 2,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,1 + 2,2 kW weight of the machine ca. t Dcsdpfxsfv Aw Te Agmok ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right).

Condition: new, table diameter 1400 mm table load 3,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,1 + 2,2 kW weight of the machine ca. t Dedpfjfv Axbex Agmock ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 700 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,2 - 2,0 U/min 900 Nm total power requirement 0,37 / 0,37 kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. Dodpsfv Axuofx Agmjck • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 315 mm 50 Kg 25 Kg chucking diameter 200 mm Dcedpfji Hg I Djx Agmjk turning speeds 0 - 5 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 45 Kg dimensions of the machine ca. 800 x 600 x 600 m welding turntable with - With integrated tripod and universal welding torch holder - Quick chuck 200mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: used, Year of construction: 1990, table load max. 40 t t with manual operation panel ja weight of the machine ca. 22 t 1918 Year ca. 1990 Dimensions (L/W/H) 3500 x 2300 x 2400 mm Dedpjhy T Nvefx Agmjck +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Dreh- und kippbar für Schweißpistole oder für Plasma condition nicht geprüft +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Dcsdeidv Eropfx Agmsk Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Plant can still be visited in operation. Djdpfx Agsnr E Enjmeck

Year of construction: 1989, condition: good (used), For sale is a fully functional welding positioner from APS. Dsdpfx Ajcl Ttvogmeck Model 1000 E Year of manufacture: 1989 Machine number: H1-008 Speed range: 0.3-1 rpm 64mm hollow shaft Tilts left and right approximately 135° Space requirement: approximately 1700x1700mm Weight: 750kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 5028830, Offer 26070 Technical Data: Dcodpfxjyrfxbs Agmok - Max. load capacity in horizontal position: 7500 kg - Faceplate dimensions: 1500 x 1500 mm - Motorized tilting of the faceplate: 0 – 120° - Rotational movement electrically adjustable, stepless: 0.0028 – 1.04 rpm - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V x 25 kW - Table height in horizontal position: approx. 1600 mm - Handheld remote control - Required space approx. W 2000 x H 1600 x D 2450 mm - Weight approx. 5500 kg

Year of construction: 2014, condition: ready for operation (used), A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Dcsdpeyrg Hyefx Agmok

Year of construction: 2015, condition: ready for operation (used), A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Dcsdpfx Ageyrg H Hjmjk

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Dodpfx Ajyqr Sxogmeck

Condition: used, WIG welding machine, electric welding unit KESTRA, type WIG 350 AC/DC Electric welding machine Manufacturer's No. / Year of manufacture approx. 1985 Power output 350 Amps = 60% duty cycle Setting range: 3 stages and fine adjustment Welding current: AC / DC Mains connection: 400 Volts, 50 Hz, 32 Amp plug - 4 meter hose pack with WIG torch - 2-cycle / 4-cycle welding unit - Water-cooled - Gas pressure regulator Space requirement L x W x H: 1050 x 560 x 900 mm Weight: 250 kg Dcodpfx Agsdzql Ssmok The welding test yields good results when welding stainless steel with direct current and good results when welding aluminum with alternating current. The HF ignition does not function; the arc can be ignited by briefly making contact.

Condition: used, 2-axis pick-and-place unit, loader, servo robot, workpiece gripper, component insertion unit, pick-and-place robot Pick-up device, handling device for presses, lathes, etc. GETECHA, Type GL-20S Serial No. 13836, Year of manufacture 10/2003 Travel range, Z-axis: 1900 mm Travel range, Y-axis: 250 mm Travel speed, Z-axis: max. 1100 mm/sec. Travel speed, Y-axis: max. 227 mm/sec. Continuously variable travel speed in the Y and Z axes via servo motors SMB - Precise axis movement via linear guides - Control system: epis - Control panel located nearby - Interfaces for conveyor belt, gripper magnets, ejector cylinders, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic mode Dcjdjharwyopfx Agmsk - Mounted gripper with 3 lifting magnets, 3 pneumatic ejector cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours: 25998 hrs. The unit was used as a loader/pick-up device on a press. Space requirement L x W x H: 2900 x 1800 x 2000 mm Weight: approx. 800 kg Good condition

Condition: used, Plasma cutting machine MB - Welding Technology, Type Plasmaprof 50 Identical construction to CEBORA Machine no. 244311, year of manufacture approx. 1992 Output: 50 amps = 35% duty cycle Dcodpfodzqa Hox Agmok 30 amps = 100% duty cycle Setting range: 2 levels Hose pack length: approx. 6 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 32 amp plug Space requirement L x W x H: 500 x 350 x 700 mm Weight: approx. 80 kg In good condition

Condition: used, WIG welding machine, electric welding unit DALEX Type TGKW 55 (AC-DC) Serial No. 532521, Year of manufacture approx. 1975 Power: 225 Amps = 60% duty cycle 125 Amps = 100% duty cycle Setting range: 2.8 to 225 Amps Type of current: Direct current and alternating current (AC-DC) Mains connection: 380 Volts, 50 Hz - Power setting via 5 coarse stages and fine adjustment via rotary potentiometer, continuously adjustable - 2-cycle and 4-cycle welding system - Remote control with rotary potentiometer for fine adjustment - Digital display for amperage - WIG hose package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement L x W x H: 1050 x 610 x 890 mm Weight: 290 kg Good condition Djdpedzqacsfx Agmjck

Condition: used, Welding turntable – welding rotating device with enclosure Circular welding device Load capacity approx. 50 kg Turntable diameter 300 mm Turntable speed 1.0-15 rpm Mains connection 230 volts, 50 Hz - Plan spiral turntable with internally stepped jaws - Infinitely variable speed control via potentiometer - Drive via geared motor, rotation direction: left - Start via electrical switch - Welding current transfer via sliding contact - Extraction port Ø 160 mm - Interior lighting Door opening W x H 715 x 1060 mm Internal dimensions W x D x H 780 x 780 x 1100 mm Dcodpfx Aedzp U Isgmsk Space required W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Djdpfx Agjd N E Rvsmjck Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: used, Motor-driven indexer and rotary table, also known as indexing table with 15° indexing lock. Manufacturer: WALTER, Type: TARM 125 Serial No.: 1156, Year of manufacture: approx. 1985 Indexing lock: 15° Flange mount: short taper DIN 55022 size 5, Ø 82 mm Internal diameter of chuck flange: Ø 44 mm Continuous internal diameter: Ø 40 mm Construction height to flange mount without taper: 163 mm Horizontal clamping surface: 260 x 215 mm Vertical clamping surface: 195 x 160 mm Center height vertical: 125 mm Motor speed: 0 to 500 rpm Power supply: 380 Volt, 50 Hz Dcjdpfx Aoyhq A Djgmsk - external control required (control unit not included) - can be used vertically and horizontally - usable as indexer or rotary transfer table - one direction of rotation continuous, the other direction with 15° indexing lock Space requirement L x W x H: 500 x 215 x 177 mm Weight: 42 kg Good condition

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Dcodpfx Agepy Uzyjmok Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: used, TIG + Shielded Metal Arc Welding Machine MESSER GRIESHEIM Type Uniwig GW 280 AC/DC Serial No. 4930185 Year of manufacture: 1985 Performance for TIG welding: 280 amps at 80% duty cycle (AC) 250 amps at 100% duty cycle (AC) 230 amps at 100% duty cycle (DC) Performance for stick electrode welding: 250 amps at 100% duty cycle (AC) 200 amps at 80% duty cycle (DC) Adjustment range: 3 coarse steps and infinitely variable Power supply: 400 volts, 50 Hz - 4-meter hose package with TIG torch Dsdpfxjxf Uw Se Agmock - 2-stroke and 4-stroke welding function - Weld time setting for spot welding - Water-cooled - Gas pressure regulator Required space (L x W x H): 1050 x 590 x 1000 mm Weight approx. 300 kg Good condition