Used Upper Support for sale (14,912)

Condition: used, maximum load weight: 31,240 kg, overall weight: 45,000 kg, axle configuration: 2 axles, first registration: 05/2024, next inspection (TÜV): 06/2027, Equipment: ABS, Excerpt from Equipment Specifications: Detachable gooseneck with external main frame: Hydraulically detachable gooseneck with external main frame, featuring integrated steering linkage and individually operated lowering cylinders. Integrated hydraulic cylinders and support arms for lifting and lowering the low-bed (mounting on the truck required). Line connections to the low-bed are mounted internally on the main frame in the curved section. Kingpin 2 inches. Mounting for locking pin. Ladder with handrail for safe access. All valves and distribution boxes are easily accessible and covered with aluminum plates. 1 pair of plastic shims for the low-bed, mounted on the side. Multiple hydraulic couplings for easy disconnection of the hydraulic lines. Gooseneck load securing: 2 pairs of recesses for attaching hooks, approximately 2000 daN lashing force. 1 pair of pivoting lashing eyes, approximately 13400 daN lashing force, mounted on the bottom of the support arm. 3 pairs of M16 threaded holes for screwing in lashing points, approximately 2000 daN lashing force, in the open outer frame. Central lubrication system / front bogie: Installation of a BekaMax progressive central lubrication system with a separate pump in the gooseneck. Optimally controlled via the DOLL tronic. Filled with a specially developed grease that has proven its reliability over many years. This covers the low-temperature range and prevents residues from mineral greases in the distributors. DOLL tronic - CAN bus system with keypads: The innovative DOLL tronic control concept allows all trailer functions to be easily and safely operated via various control panels (keypads) on the trailer. Control is via a decentralized computer-controlled CAN bus system. The control panels (keypads) are located on the front side of the gooseneck and at the rear. The functions of steering, lane keeping, suspension and central lubrication can be operated from both control panels. In addition, the functions of the detachable gooseneck can be operated on the gooseneck. The feedback of the ride height is displayed via LEDs in the keypads. Green: basic ride height, blue: upper ride level, blue flashing: above the permissible ride level, yellow: lower ride level, yellow flashing: below the permissible ride level. Ride level can be adjusted steplessly within the permitted range. Automatic synchronization when both sides are actuated. Repeater: For reliable data transmission to the EBS modulator with long cable lengths. Sockets at the front: 15-pin socket on the front cross member for lighting. 7-pin socket on the front cross member for EBS. 10-pin socket on the front cross member for control. 2-pin power socket for power supply. LED work lights on the gooseneck: 2 x 1800 lumens, for illuminating the low-bed during loading and unloading in the dark. Dcjdpfozr A Sdox Agmjk Without connection cables to the truck Front overhang approximately 1,110 mm, front cross member angled: Overhang screwed to the kingpin plate. Approximately 40° angled corners. Slip plate extending forward to protect the line connections. Low-bed in flatbed design: Flatbed frame is telescopic. Frame pre-tension adjusted for the maximum payload, reduced payload in the telescopic positions. The last telescopic stage may only be used in conjunction with container transport. The outside is designed as an open U-shape. Prepared for the attachment of load area extensions. Telescopic stages approximately every 500 mm + container positions. Low-bed l

Condition: used, mileage: 591,422 km, power: 316 kW (429.64 HP), first registration: 01/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 52 m³, loading space length: 7,400 mm, loading space width: 2,470 mm, loading space height: 2,850 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Cab & Comfort* Cab with medium-high raised roof 'XLX' (2440 mm wide, 2280 mm long) * Comfort control module on the upper bunk * Two bunks with storage space (aluminum frame), mattresses on the top and bottom * Driver and passenger seats with air suspension, lumbar support, shoulder adjustment, and heating * Seat covers in comfort quality * Storage box accessible from inside and outside * Cool box under the bunk, fully retractable * Carpet on the engine tunnel * Interior design in Urban Concrete * Ambient lighting, reading lights * Electric windows * Central locking with remote control * Air conditioning * Stand-alone air conditioning R134A * Auxiliary air heater EBERSPÄCHER D4S * Cab insulation NORDIC (cold protection) ----Infotainment & Communication* MAN Media Package Navigation Professional * MAN Media Truck Advanced radio with 7" color display * DAB+ * Video function via USB/SD * AUX-in/USB in the dashboard * Hands-free function for 2 mobile phones (Bluetooth) * Voice control for the infotainment system * Connectivity Board module (RIO Box) * MAN Tronic on-board computer * CB radio antenna & radio system * Digital tachograph & remote download ----Lights & Visibility* Safety package Lights & Visibility Basic * Work lights * LED daytime running lights * Halogen double headlights * Rear and wide-angle mirrors, curb mirrors, all heated and electrically adjustable * Sun visor ----Safety & Assistance Systems* Electronic Braking System (MAN BrakeMatic) * Emergency Brake Assist 2 (EBA2, non-deactivatable) * Anti-lock Braking System (ABS), Traction Control System (ASR) * Electronic Stability Program (ESP) * Lane-Guard System IV (lane keeping assist) * Emergency brake signal (ESS) * Safety package Plus ----Engine & Drive* Engine D2676LF80, 430 hp / 316 kW, EURO6 SCR, 2200 Nm * MAN TipMatic® 12-speed transmission with retarder * Differential lock in rear axle * ECAS air suspension system * Air suspension on front and rear axles * Disc brakes front and rear ----* Tire dimension front axle: 315/70R22.5 Dcjdpfjzgq Snjx Agmsk * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 780 l * AdBlue tank: 60 l * Techn. gross vehicle weight: * Unladen weight: * Perm. trailer load: * Overall length: * Wheelbase: 5500 mm * Inspection due: 08.2026 ----Vehicle number/Vehicle: 12224----Errors and prior sale are reserved----Advertising and various lettering have been digitally removed.----We will be happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: ----Trade-in of your old vehicle TÜV/main inspection Complete export processing Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport ----YOUR VTS TEAM

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Dedpfx Ajwz Nzmogmeck Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: used, functionality: fully functional, mileage: 404,355 km, power: 338 kW (459.55 HP), first registration: 10/2023, fuel type: diesel, overall weight: 8,523 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Adaptive Cruise Control. Cabin: CR (air comfort suspension). Tilting: mechanical. Batteries 210 Ah (rear position). Alternator charge 150 A. Engine DC13 175 460 hp EURO 6. Gearbox: G33CM. Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Side Collision Avoidance Support Driver attention support Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm. Night heater WTA cab heater 3kW. Storage rear lower, driver side - refrigerator. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres 315/70R22.5. Rear tyres 315/70R22.5. Fifth wheel Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only. Drive Axle Ratio 2.31 Fuel volume left side 825 dm3. Fuel volume right side 395 dm3. AdBlue tank capacity 150 l, right Dcsdpfezf N Ryex Agmsk Fuel tank material aluminium. Speed limitation legal 90 km/h. Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED (automatic). Daytime running light function LED and position lamps. Fog lamp front type LED 3 diodes Roof air deflector adjustable Door window air deflector Tyres Information Front left - 13 mm Front right - 12 mm Rear left inner - 14 mm Rear left outer - 15 mm Rear right inner - 14 mm Rear right outer - 15 mm

Condition: ready for operation (used), Kaiser Press 50to -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: Foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – internal working area: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with foot: 535 mm (floor mounting possible) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved sideways: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 pressing dies with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm Dcsdpfx Agjztfbwomjk -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light for illuminating the working area -Pressure gauge for pressure indication -2 prism supports included in the scope of supply -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg

Condition: good (used), functionality: fully functional, Year of construction: 2012, Motorized Swivel Bending Machine Mfg. SCHRÖDER Type: MAK 4 EVO 3200/6.0 UD Year: 2012 Technical Data Manufacturer: SCHRÖDER Type: MAK 4 EVO 3200/6 UD Year of manufacture: 2012 Working length: 3200 mm Capacity: 6 mm Upper die stroke: 850 mm Upper die geometry: 180° Bending center adjustment: 100 mm Dimensions: approx. L 6.45 x W 2.65 x H 2.75 m Machine weight: approx. 20.6 t Djdpfxozrvdgs Agmeck Accessory weight: approx. 3.4 t Equipment - Up’n Down bending die, automatically controlled by POS 3000 - Upper die tool clamping, hydraulic - Bending die tool clamping, hydraulic - Motorized central crowning - Motorized bending die adjustment, program-controlled - Bending center optimization via bending center adjustment - Foot switch - Protection of operation from the rear, controlled by a light curtain and safety PLC - Safety package EVOLUTION UD with tool changer incl. safety fence - Speed optimizer Z-axis drive (max. axis speed: 120 mm/s) Control system: POS 3000-3D graphic control View of product and machine in 3D – display Radius-Step-Bending function Stop system Positioning stop 10 - 3400 mm in U-shape with 4 sectors (850/1700/2550/3400), Panel for individual positioning of the control, pneumatic lowering of the stop fingers, steel balls in the support table. Angle stop left and right 1500 mm. The support plates are divided and can be removed individually to create the necessary space for existing counter-bends. - 2 pneumatically lowerable angle stops mounted on the frame - Front stop function of the bending die for accommodating bending rail finger segments incl. 2 finger segments matching the bending rail Fully automatic tool changer Tool changing portal for upper die tools with hydraulic tool clamping (total 7 axes) for maximum upper die tool height of 400 mm, two asynchronously movable tool changers each with three gripping units Upper die tool Tools WZS 2000, approx. 1000 N/mm2 tensile strength • Tool set for automatic tool changer, upper die Goosefoot set h= 180 mm incl. corner pieces left and right. Bending die tools Tool system for the bending die WZS 3000, approx. 1000 N/mm2 tensile strength Bending rail "A", segmented, stepped, b= 15 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm Bending rail "A", segmented, stepped, b= 20 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 20 mm •Bending rail "A", segmented, b= 30 mm h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 30 mm Lower die tools Lower die rail with recesses segmented, same radius as upper die tool b= 117 mm h= 40 mm Total length 3.240 mm, divided into 4 x 500, 2 x 620 mm All information is without guarantee. A demonstration under power is possible at any time by arrangement.

Condition: new, machine/vehicle number: GSH, The ZERMA GSH series granulators are exceptionally robust machines designed for the most demanding applications and tailored to the diverse requirements of modern recycling operations. The housings, constructed from heavy-duty steel and welded for maximum strength, withstand even extreme loads. All assemblies related to bearing support, knife mountings, and the rotor shaft are significantly oversized, resulting in outstanding durability. With simple reconfiguration, the machines can effortlessly shred both massive lumps, thick-walled pipes, and also hollow bodies or films. Depending on specific requirements (including for temperature-sensitive materials), various rotor designs are available, all featuring the advanced and superior V-cut technology. All GSH series machines consistently deliver high-quality regrind – whether processing bottle crates, profiles, sheets, films, start-up lumps, or pipes. They are economical, exceedingly reliable, easy to clean, and built for long service life. When combined with ZERMA’s extensive range of options and accessories—such as extraction systems, conveyor belts, metal detectors, fine particle separators, roll-feed devices, etc.—as well as spare parts, the result is a custom-optimized size reduction solution. The advantages include significantly reduced costs, time, and personnel requirements. Djdpfxeyr Thds Agmock Thoughtful machine housing design The housing is centrally divided at an angle, and the upper section with feed hopper can be opened hydraulically, providing unrestricted access to the rotor for knife changes and cleaning. The screen insert is also held in place by a hydraulically swiveling screen cradle, ensuring optimal accessibility for quick removal and installation. The screens are reversible. Rugged external bearing arrangement Another well-conceived design feature is the external bearing arrangement. Heavy-duty rolling bearings in steel bearing housings guarantee long service life and are ideal for even the toughest demands. The external bearings prevent grease from entering the cutting chamber, as well as preventing regrind or fine particles from getting into the bearings. This offers a distinct advantage, particularly during wet operation. Flywheel To absorb shock loads during granulation, an optional flywheel is available. For this purpose, the rotors are supplied as standard with a second shaft end. High operational safety All granulators conform to EU machinery directives and carry the CE mark. Accident prevention is ensured, for example, by run-down safety devices with limit switches, as well as hydraulically unlockable non-return valves.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Immediately available, maintenance and safety inspection new as of July 30, 2026! Description Djdpezrwntefx Agmsck Year of manufacture: 2014 Bending length [mm]: 1020.00 Press force [tons]: 36 Control system: TRUMPF TASC 6000 Standard equipment Machine - Stable machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Switch cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 6 axes Tool clamping - Upper tool clamping, automatic - Lower tool clamping, automatic Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows XPe (embedded), Pentium M with 1.1 GHz clock frequency - 1 GB RAM - 15-inch touch screen Safety - Laterally pivoting safety doors - Protective cover at the rear - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes Ergonomics package: - Comfort support table (front) - Comfort footrest - Work area lighting front and rear (LED) - 2 document holders - 2 storage consoles - 1 measuring tool storage Productivity-Plus package: - Graphical workshop programming - Automatic tool clamping - BendGuard (with block laser) - Swiveling control panel - Bending line laser - Seat and standing aid - OCB – Operator Controlled Bending

Condition: used, mileage: 577,500 km, first registration: 05/2021, brakes: retarder, Equipment: ABS, navigation system, parking heater, Engine 330 kW (449 hp), Euro VI, D, 2200 Nm, 2nd generation OM471 engine, High Performance Engine Brake, automatic transmission G 211-12/14,93-1,0 Mercedes PowerShift 3, ADR/GGVS equipment, auxiliary drive, differential lock rear axle, axle ratio i = 2.412, L BigSpace cab, level floor, hole pattern on the frame, continuous, footboard over frame, partial covering of frame overhang 1050 mm, main tank on the left 720 L + 75 L AdBlue, second tank on the right 430 L, lockable, standard fifth wheel coupling, Jost JSK 37C, fifth wheel coupling height H = 150 mm, fifth wheel offset +600 mm, disc brakes on front and rear axle, electronic braking system with ABS and ASR, hazard warning lights during emergency braking, electronic parking brake with acoustic warning, Predictive Powertrain Control, stability control assistant (ESP), lane keeping assist, distance keeping assist, attention assist, traffic sign assist, Active Brake Assist 5, cruise control, cab suspension, comfort air suspension, cab tilting mechanism mechanically-hydraulically operated, tinted windshield, light sensor, rain sensor, sunroof, electric, exterior storage compartment flap, left, exterior storage compartment flap right, storage box left under cab, door extension, curb mirrors, front mirror, heated, exterior sun visor transparent, comfort central locking system, driver's comfort suspension seat, co-driver's functional seat, seat upholstery, velour, comfort lower bunk, comfort upper bunk narrow, multi-function leather steering wheel, driver airbag, carpet covering for engine tunnel, side sun blind driver's side, electric windows on both sides, digital tachograph, 2nd generation, ADR, tachograph manufacturer VDO, on-board diagnostics, trip computer, interactive multimedia cockpit, maintenance system, Remote Online, pre-wiring for Mercedes-Benz Truck App Portal, sound system, navigation system, FleetBoard Eco Support, prerequisite FleetBoard Manager App, Truck Data Center 7, pre-wiring for Truck Data Center 7, pre-wiring for toll collection, pre-wiring for CB radio 12 V DIN socket, 24 V/15 A socket, entry lights in door panel, co-driver footwell, ambient lighting, warm water auxiliary heater, cab residual heat utilization, additional thermal insulation, electric auxiliary air conditioning, automatic climate control, bottle holder, document holder for DIN A4, storage compartment lids on driver and co-driver side, drawers under bunk, storage flaps above windshield, refrigerator in drawer under bunk, compressed air connection in cab, LED daytime running lights, halogen fog lights, work lights below, marker lights on the side, LED outline marker lights, side marker lights flashing, Safety Pack, Climate Package, chrome interior package, fuel tank capacity 1150. Dcjdszq Nhiepfx Agmjk

Condition: used, maximum load weight: 26,000 kg, overall weight: 36,000 kg, axle configuration: 2 axles, first registration: 04/2020, next inspection (TÜV): 04/2027, loading space length: 7,100 mm, loading space width: 2,550 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2020, Equipment: ABS, Meusburger MPG-2 Jumbo Lowboy Trailer | 2 x hydraulically steered | Loading height 320 mm | ZSA VIN: 0M49970 CHASSIS / COMPONENTS * 2 axles Dcsdpfx Agezriuljmjk * 2 x BPW Eco Plus * Both axles hydraulically steered * Air suspension * Central lubrication system * Hand pump for steering * Drum brakes * ABS * EBS braking system * 2-line compressed air connection * ABS electrical connection * 15-pole electrical connection * Axle distance: 1,310 mm BODY * Jumbo lowboy trailer * Saddle height: approx. 1,160 mm * Upper deck: approx. 3,775 mm * Lower deck: approx. 7,100 mm * Loading height on the lower deck: approx. 320 mm * Rear platform: approx. 2,670 mm TIRES * Tires: 245/70 R17.5 143/141 J * Axle 1: Remaining tread approx. 60 % / 60 % * Axle 2: Remaining tread approx. 60 % / 60 % WEIGHTS * Permissible total weight: 36,000 kg * Technically permissible total weight: 38,000 kg * Unladen weight: 10,000 kg * Payload: 26,000 kg OTHER * Color: Blue * Year of manufacture: 2020 * First registration: 04/15/2020 * MOT: 04/2027 * Inspection: 10/2026 New MOT/inspection and weight adjustments (increase or decrease) are possible upon request. We won't leave you alone, even after the purchase: We will assist you in obtaining export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we are happy to help! We speak German, English and Russian. All information is subject to change without notice. Changes, errors, printing and spelling errors, and prior sale are reserved. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of preparation and distribution of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, it is not only the vehicle that counts, but also the service behind it. Fairness, seriousness and customer satisfaction are our top priorities. That is why we support you personally and reliably - from the first contact to the handover of your vehicle. Come and see for yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term license plates We will assist you in obtaining export or short-term license plates. Customs formalities We will also support you with customs matters. Vehicle transport Upon request, we will arrange for the transport of your vehicle within Germany.

Condition: used, maximum load weight: 26,000 kg, overall weight: 36,000 kg, axle configuration: 2 axles, first registration: 04/2020, next inspection (TÜV): 04/2027, loading space length: 7,100 mm, loading space width: 2,550 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2020, Equipment: ABS, Meusburger MPG-2 Jumbo Lowboy Trailer | 2 x hydraulically steered | Loading height 320 mm | ZSA VIN: 0M49970 CHASSIS / COMPONENTS * 2 axles * 2 x BPW Eco Plus * Both axles hydraulically steered * Air suspension * Central lubrication system * Hand pump for steering * Drum brakes * ABS * EBS braking system * 2-line compressed air connection * ABS electrical connection * 15-pole electrical connection * Axle distance: 1,310 mm BODY * Jumbo lowboy trailer * Saddle height: approx. 1,160 mm * Upper deck: approx. 3,775 mm * Lower deck: approx. 7,100 mm * Loading height on the lower deck: approx. 320 mm * Rear platform: approx. 2,670 mm TIRES * Tires: 245/70 R17.5 143/141 J * Axle 1: Remaining tread approx. 60 % / 60 % * Axle 2: Remaining tread approx. 60 % / 60 % WEIGHTS * Permissible total weight: 36,000 kg * Technically permissible total weight: 38,000 kg * Unladen weight: 10,000 kg * Payload: 26,000 kg OTHER * Color: Blue * Year of manufacture: 2020 * First registration: 04/15/2020 * MOT: 04/2027 * Inspection: 10/2026 Dcodozrit Uspfx Agmok New MOT/inspection and weight adjustments (increase or decrease) are possible upon request. We won't leave you alone, even after the purchase: We will assist you in obtaining export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we are happy to help! We speak German, English and Russian. All information is subject to change without notice. Changes, errors, printing and spelling errors, and prior sale are reserved. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of preparation and distribution of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, it is not only the vehicle that counts, but also the service behind it. Fairness, seriousness and customer satisfaction are our top priorities. That is why we support you personally and reliably - from the first contact to the handover of your vehicle. Come and see for yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term license plates We will assist you in obtaining export or short-term license plates. Customs formalities We will also support you with customs matters. Vehicle transport Upon request, we will arrange for the transport of your vehicle within Germany.

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available Dodpfx Aozrpr Dsgmsck

Condition: used, mileage: 447,416 km, power: 331 kW (450.03 HP), first registration: 02/2023, fuel type: diesel, empty load weight: 8,543 kg, maximum load weight: 10,457 kg, overall weight: 19,000 kg, axle configuration: 4x2, wheelbase: 3,750 mm, color: red, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2022, number of seats: 2, Equipment: ABS, air conditioning, cruise control, hydraulics, navigation system, parking heater, Color: Red, Unladen weight: 8543 kg, Gross vehicle weight: 19000 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/70 R22.5, Leaf spring/air suspension, Retarder, Digital tachograph, Trailer coupling: FISCHER SK-S36.20 2/150, -660 mm, EBS - Electronic Braking System, ESP - Electronic Stability Program, Automatic air conditioning, Auxiliary heater, Adaptive Cruise Control ACC, Parking heater with automatic preselection, Seat heating, LED headlights, Headlight cleaning system, Automatic lights, Headlight leveling, Radio, Bluetooth audio streaming, GSM preparation Bluetooth, Rain sensor, Multifunctional leather steering wheel, Mechanically adjustable steering column, Lumbar support, Theft alarm, Sunroof, Roof spoiler, Fog lights, Electrically adjustable and heated exterior mirrors, Electric curb mirror, Wide-angle mirror, Anti-theft immobilization, Central locking with remote control, Windshield, Refrigerator, Axle load indicator, Work lights, Hill Hold Control HHC, LED daytime running lights, Connection plug 1x15 pin, floating function, Telematic system, Side skirts, Upper and lower bunk, cab suspension, SCR, Rema connection, Ambient lighting. Dsdpfszqhifsx Agmock

Condition: excellent (used), WEINIG HYDROMAT 22 AL four-sided planer - max. width of workpiece: 220mm - max. height of workpiece: 130mm - 8 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 130mm, 7.5kW 3) vertical left 130mm, 7.5kW 4) vertical right 130mm, 5.5kW 5) horizontal upper 220mm, 11kW – 5th spindle electrically adjustable up/down 6) horizontal lower 220mm, 5.5kW 7) horizontal lower 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360°, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - top: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter - bottom: - infeed roller, toothed, pulling, swiveling in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg - Infeed conveyor with centering device: - roller width 450mm - 1 toothed pulling roller at the inlet - 22 smooth pulling rollers - adjustable top pressure - conveyor length 9020mm - stepless speed adjustment 10-60m/min - motor 0.75kW - dimensions L/W/H 9020x790x1150mm Net price: 179900 PLN Dedpfxezrlade Agmsck Net price: 42850 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 265 mm dayligth 480 mm table height 900 mm table width 90.0 mm oil volume 230 ltr. voltage 400 Volt total power requirement 18.5 kW weight 10500 kg range L-W-H 4100 x 2000 x 2820 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" with graphics/touchscreen * 2D graphical programming * 15" high-resolution color TFT screen * Bending sequence calculation * Product programming and real-size display * USB interface - CNC controlled axes: Y1 - Y2 - X - R - crowning - CNC electro-motorized backgauge (X-axis) * on ball screws Dcedpfxoxaa Eqo Agmjk * Travel: max. 750 mm * X-axis travel speed: 350 mm/s * with 2x manually adjustable backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 23907, total length: 3,750 mm, total width: 1,800 mm, table height: 780 mm, overall weight: 3,000 kg, COMANDULLI edge grinding machine, model PENTA 5+4 SX Belt running direction: LEFT to RIGHT, year of manufacture 2008, #23907 • New conveyor belt, May 2025 • 5 end-face grinding supports, 130 mm, with vertical oscillation • 2 pneumatic lower supports / 2 upper supports • Water groove milling support, manual height and side adjustment • Chamfering support, manual height and side adjustment • Table extension console • Water tray • Space requirement: approx. 375 x 180 cm Price • EXW from machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories in the pictures are not included in the machine/scope of delivery. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold "as is", with no warranty of any kind Dcjdpfx Aozrlkiegmsk Inspection possibility • At the operating site near Düsseldorf Availability • After delivery of the new machine, approximately November/December 2026

Condition: excellent (used), Year of construction: 2025, lifting height: 25,060 mm, fuel type: diesel, Weights Empty weight: 3.332 kg Functional Lifting capacity: 230 kg Working height: 2.706 cm Working width: 236 cm Dimensions of cargo space: 749 x 236 x 307 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 1584 m Max swing of platform in degrees: 440 Production country: IT Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: Ecoline 270 Year of build: 2025 Condition: Used Data: Max. working height: 27,06 m Max. platform height: 25,06 m Max. reach: 15,84 m Dcsdpfszqd D Sjx Agmok Total dimensions LxWxH: 7,49 x 2,36 x 3,07 m Platform dimensions LxW: 1,38 x 1,09 m Max. basket load: 230 kg Swivel range of the upper carriage: 440° Support width: 3,37 m Support width one side: 2,75 m Support dimension: narrow 2,15 m Support length: 4,10 m Empty weight: 3.332 kg Total permissible weight: 3.500 kg Driving license category: B / 3 Special features: auf IVECO Daily 35S14H / AdBlue. Information: TÜV und UVV new.

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Dcedpfx Agjxy Tm Iemsk

Condition: used, Year of construction: 2024, New machine – special price – year of manufacture 2024. HAND GUARD Edition Single Flex, unit. Image included. The HAND GUARD system is based on the early detection of a hazardous situation and thus protects the user from injuries. It functions in every camera-based system and initially warns the user visually to indicate an impending danger. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials, such as wood, metal, and plastic. • Contactless and injury-free • Quick start-up • 100% damage-free • Works with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter, fully retractable under a single-sided pivoting saw unit. Pivoting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and pivoting adjustment and a maximum saw blade overhang of 179 mm. (Partial installation of the scoring unit required). In addition, there is the control unit at eye level, with which you can adjust the height and pivoting of the saw blade, plus, depending on the choice of the control package, the speed and other functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: In this panel saw, distinctive design meets timeless aesthetics. The Altendorf double carriage is famous for its smooth running and precise movement. It can be locked steplessly at any position. The large double rollers keep the upper carriage in absolute connection with the lower carriage in the respective guide rods. This running quality is maintained even under decades of stress and contamination. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm, which provides helpful support when cutting long workpieces on the parallel fence. Positionable 90° under the double carriage. Dcedpfx Ajyyap Eegmek 12" touchscreen with integrated keyboard • Automatic dimension correction on the parallel and mitre fence when pivoting the saw unit • Stepless fine adjustment of the axes via +/# buttons • Easy calibration of the axis • Machine diagnostics, operating hour counter, USB interface • Calling up the last dimension input (back function) • Conversion from peak to butt dimension on the parallel and mitre fence • Shift-cut function with automatic determination of missing angles or dimensions • Extended tool management for max. 100 storable tools • Storage of the scoring position (3-axis scoring unit) • Storage of the thickness and cutting width of the main tool • Storage of the speed of the main tool Additional functions: • Grooving: with automatic step-by-step positioning of the parallel fence • Chain dimension function: cutting sequences with the same distance on the parallel fence • Miter cut with allowance • Calculator function with result transfer to the axes • Geometric shapes, determination of missing angles or dimensions • Bevel cuts, determination of missing angles or dimensions • 9999 storable cutting programs • Standard preparation for remote maintenance • Template holder directly next to the touchscreen Accessories included in the Edition Single Flex: • Double carriage with a carriage length of 3000 mm • Vario drive 5.5 kW (7.5 hp) VAR

Condition: good (used), Year of construction: 2015, lifting height: 14,350 mm, fuel type: diesel, Weights Empty weight: 3.350 kg Functional Lifting capacity: 200 kg Working height: 1.635 cm Dimensions of cargo space: 678 x 212 x 280 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Dodszp U Swepfx Agmeck TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 990 m Max swing of platform in degrees: 350 Additional information Please contact Christian Theißen for more information Manufacturer: Multitel Model: 160ALU Year of build: 2015 Condition: Used Data: Max. working height: 16,35 m Max. platform height: 14,35 m Max. reach: 9,90 m Total dimensions LxWxH: 6,78 x 2,12 x 2,80 m Platform dimension WxD: 1,20 x 0,70 m Max. basket load: 200 kg Swivel range of the upper carriage: 350° Ground clearance: 0,20 m Support width vertical: 2,17 m Support length: 3,28 m Empty weight: 3.350 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket, loading area with side panels, box body for material: 1.50 x 0.50 x 0.50 m. Information: Tüv and UVV new Location: 41468 Neuss immediately available

Condition: used, power: 140 kW (190.35 HP), Year of construction: 2013, CAT 328 D (328 DLCR ZTAL) Tunnel Excavator Many additional parts available for an extra charge, e.g., a complete upper carriage, etc.! • Power: 140 kW (190 hp) • Articulated/offset boom for tunneling applications • Quick coupler system • Blade support • Air conditioning • Short tail swing version • 11,600 operating hours • 600 mm track width • Includes 1 x 1.3 m³ digging bucket and 1 x ripper • Excavation depth: approx. 7 m • Unladen weight: 43,500 kg - German machine! - Fully functional! - All maintenance carried out by Zeppelin / Caterpillar Errors and prior sale excepted! = Additional information = Dcedowmpcuopfx Agmek Year of manufacture: 2013 Damage: none

Condition: used, Year of construction: 2008, PC OFFICE / WIN EDGE control Working height adjustable by C.N. Panel height (mm) 60 Feed speed mt / min 25 Upper motorized rubberized belt electronically adjustable by CN Side roller conveyor with idle wheels for panel support Rectifier group with two motors Reel holder warehouse Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with pressure rollers End trimming unit with 2 motors with automatic inclination adjustment Trimming unit with two superimposed motors Gleaning unit with 2 adjustable tilting motors Rounding unit with 4 motors Toupie unit tiltable 0-90 ° Sanding unit Dcedow Dd Efjpfx Agmek

Condition: ready for operation (used), Year of construction: 2001, pressure 135 t chamfer lenght 3050 mm distance between columns 2550 mm dayligth 320 - 560 mm stroke 240 mm working feed 10.0 mm/sec return speed 150 mm/sec column arm 400 mm work height max. 1050 mm control DNC 1200 PS/B operating pressure max. 297 bar compressed air 4.5 - 6.0 bar connected load 15.0 kW oil volume 250 ltr. weight 11500 kg range L-W-H 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing - in checked conditions - machine Video - ?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B * Swiveling Control Panel, Front Right * Numerical Programming * Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) * with 3x Manually Adjustable Backgauge Fingers (Z-Axis) * Maximum Travel Speed: 250 mm/sec Dcjdsx Ik D Ajpfx Agmek - CNC electro-motorized height adjustment from the backgauge (R-axis) * Maximum travel speed: 100 mm/sec. - CNC under-table crowning - CNC pneumatic die shifting (I-axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard, including swiveling door - 2x side safety guards - includes LAZER SAFE safety device - front - 2x stable front support arms with sliding system - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - Wiring diagram + hydraulic diagram

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, operating hours: 77,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TrumaBend V1700S / 4m bending length Dcedpjzrnrcsfx Agmjk Year of manufacture: 2006 Press force: 1700 kN (170 tons), bending length: 4080 mm Machine operating time: 77,000 hours, hydraulic operating time: 48,000 hours New IPC (KEBA 5) Configuration 1 active bending aid, 2 support consoles 4-axis back gauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 35,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TruBend 5170 / 4m bending length Year of manufacture: 2/2014 Press force: 1700 kN (170 tons), bending length: 4,080 mm Djdpfx Aozrnpuegmsck Machine operating time: 35,000 hours, hydraulic operating time: 25,000 hours Control system: TASC 6000 Configuration: 1 active bending assistant, 2 support consoles 4-axis backgauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026