Used Used Machining Center for sale (92,196)

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Dwsdpfexy Tmnsx Akhea

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Dwodjxy Tlwjpfx Akhsa

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Dedpfxsyymz Uo Akhowa Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: excellent (used), Year of construction: 2006, 5-axis vertical machining center Brand: IBARMIA Type: ZVH45/L2200 Year: 2006 CNC: SIEMENS 840 D Specifications: Table surface: 2,600 x 800 mm X-axis travel: 2,200 mm Y-axis travel: 800 mm Z-axis travel: 860 mm C-axis: 360,000 positions A-axis: +/- 105° (0.001°) Spindle speed: 15,000 rpm (HSK 63) Spindle power: 25 kW Equipped with: Djdpjzq Ea Ijfx Akhswa 30-position tool changer Chip conveyor Electronic handwheel SIEMENS SPIRSIN H/V rotary table, dia. 800 mm Through-spindle coolant

Condition: like new (used), functionality: fully functional, * Mori Seiki NMV 5000 DCG. * Year: 2008. * Equipment value, including zero points, chucks, BT taper chucks, turning tool chucks, and pallets: 50,000–55,000 euros. * 5-axis continuous machining center. * High-precision Heidenhain linear guides. * Interface for connecting a pallet loader and robot. Dsdpfxjzp Emfs Akhswa * Table with turning function. * Independent high-pressure cooling system at 40 bar. * Spindle oil cooling system. * BT 40 tool magazine. * Magazine capacity: 60 tools. * Maximum tool diameter: 125 mm. * Maximum tool length: 300 mm. * Maximum tool weight: 8 kg. * Travel on the X-axis: 730 mm. * Travel on the Y-axis: 510 mm. * Travel on the Z-axis: 510 mm. * Table with turning function. * Maximum workpiece diameter in turning mode: 450 mm. * Maximum turning diameter in turning mode: 700 mm. * Mori Seiki Mapps 4 conversational control. * Spindle speed: 20,000 rpm. * Spindle motor power: 18.5 / 15 kW. * Maximum cutting torque: 135 Nm. * C-axis table: 360,000 x 0.001 * B-axis rotation: +160 / -180 * Rapid traverse X/Y/Z: 50 / 50 / 50 m/min * Renishaw tool measurement system. * Renishaw workpiece measurement system. * Automatic zero-point adjustment. * Automatic cutting power control. * Program memory: 2 MB. * Dynamic zero-point correction (up to 8 points). * Pre-check of tool availability. * Custom macro (999 variables). * Rear chip conveyor. * Tool life management (128 x 2 groups). * Electrical transformer. * Documentation, parts list, electrical diagrams, programming, and instruction manual. * Weight: 13,500 kg. * Machine is currently in operation. * Available for inspection by an authorized Mori Seiki technician. * Immediate delivery, subject to immediate sale.

Condition: used, Year of construction: 2009, x-travel 2.360/2x 930 mm y-travel 600 mm z-travel 600 mm table surface area 2.750 x 600 mm Control Siemens 840 D spindle tunring speed 30 - 6.000 U/min tool taper SK 50 number of tool places 26 Pos. Dedpfezqgh Hex Akhewa Number of working hours ca. 50.884 h connected load 69 KVA weight of the machine ca. 20 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Handwheel, Heidenhain HR 410 - Chip conveyor - External belt filtration system Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2015, input voltage: 354 V, type of input current: three-phase, Equipment: chip conveyor, We offer this used Haas VF-6SS vertical machining center, year of manufacture 07/2015. The machine is in excellent condition, with no collisions. Serial number: 1124558 On timer: 11205h VF-6SS - Super Speed ​​VOC 64" x 32" x 30" CC6 - Chip Conveyor Screw P-COOL - Programmable Coolant Nozzle PFDM - Power Failure Detection Module RJH-C - Wheel Remote Control with Color LCD Dwsdpfx Asy D Epfokhea RTAP-3 - Direct Tapping WIPS-R - Renishaw's Intuitive Wireless Probing System MACRO - User Defined Macros COORD - Coordinate Rotation and Scaling SOM - Spindle Orientation TSC50T - Through-Spindle Coolant, 300 psi (21 bar) Emulsion Separator If you have any further questions or need more information, please feel free to send us a message or call us.

Year of construction: 2009, condition: ready for operation (used), A Primacon CNC high-precision vertical machining center for machining small workpieces in the medical sector is available. Axis travels X/Y/Z: 240mm/240mm/240mm, table dimensions X/Y: 350mm/300mm, max. table load: 60kg, spindle speed: 40000rpm, tool holder: HSK-25, feed rate: 12m/min, rapid traverse: 12m/min, positioning accuracy: +/-0.001mm, repeatability: +/-0.0005mm. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/2200mm, weight: approx. 1000kg, control: Heidenhain. The spindle is occasionally not clamped correctly during the tool change process. The ventilation hose of the Z-axis rubs against the A-axis block. Documentation available. An on-site inspection is possible. Dwsdpozq Eb Sjfx Akhja

Condition: like new (used), 1 milling unit 8 vertical drills Dwsdpfx Akjy Ukzzjhoa 6 side drills 1 saw 12 kW Year of manufacture: 2011

Condition: excellent (used), Year of construction: 2011, operating hours: 2,450 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 12,001,400 mm, travel distance Z-axis: 18,001,790 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 3,000 kg, total height: 4,700 mm, total length: 12,700 mm, total width: 7,800 mm, rotary table diameter: 2,200 mm, rotational speed (max.): 200 rpm, overall weight: 57,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,450 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 460 mm, Equipment: chip conveyor, documentation/manual, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 6000 Y-axis travel mm: 1200/1400 Z-axis travel mm: 1800 (H) / 1790 (V) Dwodpezb H Tfefx Akhja C-axis degrees: 360º (0,001) A-axis degrees: ±180° B-axis degrees: ±180° Rapid traverse m/min: 30 Worktable Table dimensions mm: 6000x1235 Milling/turning table nc: Table dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 max. torque Nm: 4600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/cont) Spindle torque Nm: 382/278 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 With free neighboring places mm: 200 With occupied neighboring places mm: 104 Max. Tool Length mm: 460 Max tool weight kg: 25 Chip-to-chip time s: 9.8 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Workarea light DXF import function Paper band filter Automatic door Indexing Head Set Up for Shaft Machining Axles can be hydraulically locked using the M function Machine running times Under power: 29447 Spindle Working: 2450 Basic machine dimensions / weight Length mm: 12700 Width mm: 7800 Height mm: 4700 Weight kg: 57000

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Djdpfezr N H Ujx Akhswa Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: CE marking, HOMAG Optimat BOF 31/40/K Manufacturer: HOMAG Group (Germany) Type of machine: CNC machining center with a cantilever table Year of manufacture: 2001 Design: Stable gantry design (movement in the X-axis is provided by the gantry) Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm (working area for one large part or shuttle operation) • Y-axis (width): 1,200 mm (tool reach during milling) • Z-axis (stroke): 400 mm (max. workpiece passage including clamps approx. 100 mm) Dwodpfx Akjzr N E Dohja Working table (Version K – Cantilever) • Number of cantilevers: 8 sliding beams (cantilevers). • Clamping elements: Two-circuit vacuum system. Suction cups can be freely positioned on the cantilevers. • Positioning aids: Pneumatically controlled stops (rear and front row) for easy and precise positioning of parts. Aggregates and equipment • Main spindle: Power 11 kW, HSK F63 clamping, liquid-cooled. • Tool changer: 12-position disc tool changer, which moves together with the gantry in the X-axis. Control and Software • Control system: HOMAG PC85 (industrial PC based on Windows). • Programming: woodWOP 5.0 / 6.0 (graphical interface for creating macros and drilling patterns). • Vacuum pump: Typically Busch with a capacity of 100 m³/h (standard for cantilever machines).

Condition: used, Year of construction: 2000, functionality: fully functional, HOMAG Optimat BOF 31/40/G Manufacturer: HOMAG Group (Germany) Machine type: CNC machining center (stationary machine) Year of manufacture: 2000 Design: Gantry design for maximum stability Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm • Y-axis (width): 1,200 mm • Z-axis (travel): approx. 400 mm (workpiece passage approx. 60–100 mm depending on clamping) Equipment and units • Main spindle: Liquid-cooled electrospindle (power 11 kW) • Tool clamping: HSK F63 • Tool changer: Disc tool changer with 12 positions, located on the gantry for quick tool changes. Clamping system • Table type: Full table • Vacuum pump: 2 pcs - Siemens Elmo water-type 2BL1 with a capacity of up to 60 m³/h Control and Software • Control system: HOMAG PC85 (based on Windows) • Software: woodWOP (one of the most widespread and intuitive systems for CNC machining) Dwjdpfxjzr Nure Akhoa

Condition: used, Year of construction: 2019, 5-axis CNC machining center Manufacturer: WEMAS Type: VZG 72-5A Year of manufacture: 2019 CNC control: Heidenhain High-Speed-Cutting TNC 640 Travel ranges: X/Y/Z: 720 x 600 x 520 mm Djdpozqzqvsfx Akhswa 5-axis milling and drilling Table rotation C-axis: 360° Table swivel B-axis: -50° / +110° distance Spindle nose to table: 150-670 mm Pitch circle of the table top: Ø 720 mm Table clamping surface: Ø 720 x 540 mm Table load dynamic: 300 kg Table load positioning: 500 kg Centering bore: Ø 50 mm Speed range, stepless: 20-12,000 rpm Spindle taper: SK 40 Tool clamping: pneumatic 60-position tool changer Tool diameter max.: 76 mm (Lateral offset): 127 mm Tool length max.: 250 mm Automatic workpiece measuring probe Travel speeds: Rapid traverse axes X/Y/Z: 48 m/min Speed max. B-axis: 110 rpm Speed max. C-axis: 170 rpm Coolant system I: External tool cooling via external nozzles Coolant tank: 240 liters Operating pressure, external: 0.9 bar Multi-sided machining in conjunction with Rotary tilting table Ø 720 mm IKZ 80 bar 3-stage pressure regulation 20 / 40 / 80 Glass scales in all axes Temperature compensation Z-axis RENISHAW measuring probe 3D with infrared transmission Scraper band chip conveyor (discharge height 800 mm) Chip cart Coolant system Handwheel Siemens HRS510 Cabin roof, automatic 3826

Condition: used, Year of construction: 2014, CNC machining center, horizontal Manufacturer: Spinner Type: H630-A Year of manufacture: 2014 Control: Fanuc 0iMD Travel ranges: X/Y/Z: 1,000 x 850 x 950 mm Milling spindle up to 10,000 rpm with “In-Line” direct drive Tool taper size 40 Air blow-out system for spindle taper 4th axis: rotary table Dual-pallet changer: 2 x 630 x 630 mm High-speed automatic tool changer 100-position tool changer Horizontal milling and drilling Multi-sided machining in conjunction with the rotary table as the 4th axis Glass scales in all axes Laser tool measurement, workpiece measuring probe RENISHAW Dsdozqy I Hopfx Akhjwa IKZ 40 bar Splash guard enclosure High-pressure coolant flushing Work area light 3826

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 125 mm, rotational speed (max.): 24,000 rpm, Together with machine goes a lot of tools. Djdpfx Ajya Aimokhowa

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,600 mm, spindle speed (max.): 8,000 rpm, total height: 2,530 mm, total width: 1,950 mm, overall weight: 2,600 kg, feed length X-axis: 500 mm, feed length Y-axis: 320 mm, feed length Z-axis: 420 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, travel distance X-axis: 500 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, table length: 800 mm, table width: 260 mm, Equipment: documentation/manual, Special Offer – 5% Discount Available! CNC Machining Center 532 (VMC 600/22 DIGITAL) The CNC Machining Center 532 is a compact and efficient machining center designed for precision metalworking. Its rigid construction, high machining accuracy, and flexible CNC control options make it an excellent solution for serial production, tool rooms, and custom manufacturing. The machine is suitable for milling, drilling, and tapping operations on steel, aluminum, and other engineering materials. Its stable design minimizes vibration and ensures excellent surface finish and dimensional accuracy. Main Features * BT40 spindle with 8000 rpm Dedey Ht Axjpfx Akhjwa * Suitable for milling, drilling, and tapping * 10–12 position tool magazine (bamboo type) * Fast automatic tool changes * CNC control options: Siemens 808D, Siemens 828D, Fanuc Oi-MF or GSK * Fully enclosed working area * High positioning accuracy and repeatability * CE certified Technical Specifications * Model: CNC 532 * Manufacturer code: VMC 600/22 DIGITAL * Main motor power: 3.7 kW * Maximum spindle speed: 8000 rpm * Spindle taper: BT40 * Table size: 800 × 260 mm * Axis travels (X/Y/Z): 500 / 320 / 420 mm * Spindle-to-table distance: 90–510 mm * Positioning accuracy: 0.005 mm * Repeatability: 0.003 mm / 300 mm * Machine dimensions: 2600 × 1950 × 2400 mm * Machine weight: 2600 kg Applications * Precision milling * Drilling * Tapping * Machining of steel, aluminum and non-ferrous alloys * Serial production * Tool rooms * CNC workshops * Manufacturing companies Optional Equipment * High-pressure coolant system * Through-spindle coolant * Tool measuring and probing system * Digital readout (DRO) * Increased table load capacity * Additional CNC control configurations Key Advantages * Excellent price-to-performance ratio * High machining accuracy and repeatability * Compact and rigid construction * Wide range of machining applications * Flexible CNC control options * Reliable industrial performance Transport and Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, and comprehensive after-sales support. Contact us for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI mit SmartNC, table width: 500 mm, table length: 900 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale is a very well-maintained vertical CNC machining center, Quaser MV 154 P, manufactured in 05/2015, with initial commissioning in 09/2016. The machine is in very good technical condition and fully functional. A particular advantage is the recently renewed main spindle, which has only approximately 10 operating hours – the spindle is practically as new. An inspection while the machine is powered on is possible by prior arrangement. TECHNICAL DATA Control: - Heidenhain iTNC 530 HSCI with SmartNC Travel distances: - X-axis: 760 mm - Y-axis: 530 mm - Z-axis: 560 mm Dedpjibat Iofx Akhjwa - Rapid traverse: 40 m/min Main spindle: - Maximum speed: 12,000 rpm - Maximum power: 25 kW Tool magazine and work table: - Tool magazine: 30 positions - Table size: 900 × 500 mm EQUIPMENT - Chip conveyor - Inclined bed filter system - Zero-point clamping system - 4th axis Rotamatik 120 - Blum measuring probe RENEWED COMPONENTS - Main spindle renewed, operating time only approx. 10 hours - Motor newly re-bearinged - Ball screw of the X-axis renewed - Däublin unit renewed The machine can be inspected and demonstrated at our location in 78132 Hornberg by arrangement. For questions, further technical information, or to arrange an inspection, Arnd Sauter GmbH is always at your service. Price: 55,000 EUR net, ex works. Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000042824, We are offering for sale a very well-maintained Biesse BREMA EKO 2.2 machine from 2021. The machine includes tool changing, two drilling units, and a set of tools. Dsdpfx Ajzcrfpokhjwa Software: bSolid. The machine has been serviced by our technician, so we are very familiar with its condition and history. The machine can be tested at our showroom in Brno.

Condition: good (used), DMG Mori Sauer Lasertec 65 Shape Year of manufacture: 2014 X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 560 mm Control system: Siemens 840D sl Main spindle: Speed range – main spindle: 20 - 10,000 min/-1 Drive power – main spindle: 13 / 9 kW Max. torque: 83 / 57 Nm Tool interface: HSKA63 DIN 69893 NC rotary table: Table clamping surface: 800 x 650 mm Max. table load: Dodpezqddxjfx Akhswa Swiveling range: +/- 120° Rotary range: 360° T-slots: 600 Max. workpiece dimensions: 650 (840) x 500 mm Tool magazine: Number of tool positions: 30 Max. tool weight: 6 kg Max. tool diameter: 80 mm Max. tool diameter with free adjacent tool pocket: 160 mm Max. workpiece length: 315 mm Tool change time (tool to tool): 1.6 sec Chip-to-chip time: 8.0 sec Feed rates: Rapid traverse: 40 m/min Feed force: 7/13/10 kN Feed rate: 1 - 40,000 mm/min Total power consumption: 24 kVA Machine weight (approx.): 11.5 t Space requirement (approx.): 4.5 x 3.5 x 2.3 m Documentation Coolant system Electric handwheel Laser head: 100 watts Laser hour meter: 6177 h / 2802 h Machine hour meter: 18703 h / 4738 h

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 0-250-17-2346, functionality: fully functional, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 300 mm, number of axes: 4, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 4,300 mm Travel range, Y-axis: 2,250 mm Travel range, Z-axis: approx. 300 mm Main spindle Power: 10 kW Tool interface: HSK-F63 Spindle speed, max.: 24,000 rpm Axis configuration Controlled CNC axes: 4 Interpolating C-axis Servo-controlled Z-axis Tool changer Number of positions: 14 Tool holder: HSK-F63 Dwedpszld Iyjfx Akhsa Drilling unit Number of drilling spindles: 12, vertical Integrated groove saw Vacuum system Vacuum pumps: 3 x Becker MM1322 AV Total air flow: approx. 300 m³/h MACHINE DETAILS CNC control Version: WoodWOP 6 Beckhoff Industrial PC Beckhoff TwinCAT CNC Bosch Rexroth IndraDrive Digital Servo Drives SERCOS Motion Control Supply voltage: 415 V Frequency: 50 Hz Phases: 3 Full-load current: 61 A Main fuse: 80 A Control voltage: 24 VDC EQUIPMENT Matrix vacuum table 10 vacuum zones Heavy-duty gantry construction Automatic central lubrication system Twin extraction hoods with automatic positioning

Condition: used, Year of construction: 2012, CNC machining center, horizontal Manufacturer: Spinner Type: H500-A Year of manufacture: 2012 Control system: Fanuc Oimd Travel range: X/Y/Z: 700 x 650 x 650 mm; 36 m/min. Dedezqva Sspfx Akhewa Milling spindle 12,000 rpm with “In-Line” direct drive Tool taper size 40 Air blow-out system for spindle taper 4th axis: rotary table 2-position pallet changer: 2 x 500 x 500 mm High-speed automatic tool changer as a dual-arm changer for 60 tools Horizontal milling and drilling Multi-sided machining in conjunction with a rotary table as the 4th axis Linear guide in all three axes Glass scales in all axes Laser tool measurement, workpiece measuring probe RENISHAW IKZ 40 bar Splash guard enclosure High-pressure flushing system Work area lighting 3826

Condition: repair required (used), Year of construction: 2010, functionality: limited functionality, BIESSE Skipper 130 - Year of manufacture: 2010 Dsdpszp Simofx Akhswa - Available from September 2026 - The lower drilling unit has a problem and needs to be repaired. - The machine is still in operation and can be inspected. - Please feel free to contact us if you have any questions.

Condition: ready for operation (used), Year of construction: 2006, A Reichenbacher CNC 5-axis twin-head machining center for the door manufacturing industry is available. Spindle power: 15kW, Speed: 24000rpm, Tool interface: HSK-F63, Tool positions: 60, Milling spindle spacing: 1040mm, Spindle housing dimension: 150mm, Travel X/Y/Z: 5100mm/2100mm/2650mm, Tool change stroke: 550mm, Max. travel speed X/Y/Z: 60m/min/90m/min/20m/min, Clamping beam speed: 40m/min. Vacuum support rails: 2, Vacuum cups: 2×30, Stop stroke: 150mm, Stop pin diameter: 30mm, Through-feed stop 1/2: 300mm/700mm, Max. veneer overhang: 5mm, Max. veneer thickness: 5.5mm. Workpiece length range: 800mm-3200mm, Workpiece width range: 600mm-1400mm, Workpiece thickness range: 38mm-72mm, Max. workpiece weight: 200kg. Chip conveyor belt width: 700mm, Infeed roller conveyor dimensions X/Y: 6000mm/1600mm, Outfeed roller conveyor dimensions X/Y: 6350mm/1600mm. Overall system dimensions X/Y/Z: approx. 18300mm/9750mm/3500mm, Machine dimensions X/Y/Z: approx. 4200mm/1600mm/3000mm, Machine weight: approx. 10500kg, Control system: Siemens Sinumerik 840D power-line. Including fully automatic infeed and unloading, 2×gantry cranes, safety equipment, various tools and a self-lowering roller table. This system was modernized in 2016. Documentation vorhanden. An on-site inspection is possible. Djdpfxjzqu Hwj Akhewa

Condition: excellent (used), Year of construction: 2018, Hartford LG-500 Vertical Machining Centre Dwjdpowif R Tjfx Akhea Year: 2018 (only 400 working hours) Model: LG-500 Control: Hartford Plus 3 Table Size: 620 x 420mm Table Load: 300 kgs Axis Travels X/Y/Z: 620 / 420 / 450mm Spindle Nose to table: 100 – 550mm Spindle Taper: 40 INT Spindle Speeds: 12,000 RPM 12 station ATC Machine as new