Used Velp Scientific Zx3 Advanced for sale (2,935)

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Ibodpfx Aneg Ey T Eomea medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Ibjdpfx Aog Ewwrsnmea Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2018, Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Software: metrolog AN Scan Standard Geosurf Advanced SP Step converter I ++ interface Technical specifications Measurement paths: X: 1200mm Y: 2000mm Z: 1000mm Max workpiece weight: 1200kg Weight of the measuring system: 5700kg Overall dimensions: 3020x2190x3750mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.9μm Volumetric length measurement deviation: MPEE = 2.9+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Ibedpfx Anod Ambtemea Air Supply: Minimum air pressure: 6bar Air consumption: 120NI / min

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 355 kg, total length: 2,000 mm, total width: 1,300 mm, total height: 1,800 mm, The AVIKO 60100 G3 DRY ADVANCED detects flaws on steel balls with diameters ranging from 60 to 100 mm. Customers can control the system via the PC/PLC and its intuitive HMI, with access to software statistics, protocols, sorting history, video manuals, and direct connection to the machine monitoring software Precision Viewer. All primary movement elements are driven by compressed air or electric motors. The Advanced model is equipped with advanced eddy-current probes and incorporates the eddyvisor C instrument for precise crack detection. For operational efficiency, a loader and outlet holder are included as standard features. For more details please visit our website. Iodpfx Ansy H Dmbsmoba

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 175 h, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,700 mm, workpiece width (max.): 950 mm, overall weight: 2,500 kg, table width: 950 mm, working width: 950 mm, air pressure: 6 bar, feed length X-axis: 3,700 mm, feed length Z-axis: 80 mm, power of the milling unit: 12,000 W, rotational speed (max.): 24,000 rpm, Equipment: rotational speed infinitely variable, Lightly used 3-axis CNC machine available immediately! 4-sided formatting 12kW main motor HSK 63F Automatic 4-position tool changer Pickup station for additional tools Drilling head DH17 2 alignment stops in X-direction for short/long panels Foldable tables at front and rear Software on the machine AND in the office with dedicated license Isdpsxmbm Aofx Anmoba DXF import Modern, fully-featured CNC machine with low operating hours – immediately available!

Condition: used, mileage: 16,902 km, power: 110 kW (149.56 HP), first registration: 05/2021, fuel type: hybrid, color: blue, gearing type: automatic, number of seats: 5, Equipment: ABS, air conditioning, electronic stability program (ESP), immobilizer system, Optional equipment: Ijdpfxev Tt A To Anmoba Storage and luggage compartment package, ambient lighting, trailer hitch preparation, Audi connect plus (internet-based services), electrically adjustable, heated, and folding exterior mirrors with automatic dimming and curbside assistance, Business package, aluminum roof rails, driver assistance system: high beam assist, electrically operated trunk lid (opening and closing), Gloss package, interior mirror with automatic dimming, S line interior package, low-rolling-resistance tires, front lumbar supports, electric. Adjustable, metallic paint, progressive steering, split/folding rear seat backrest (40:20:40), seat upholstery/cover: Alcantara/550 synthetic leather combination with embossed logo, heated front seats, Bang & Olufsen sound system, sound generator, tinted rear windows (privacy glass). Other features: Passenger-side airbag (detachable), driver/passenger-side airbag, acoustic pedestrian protection, exterior sound (e-sound), Audi connect (emergency call and assistance system), Audi Drive Select, aspherical exterior mirror (left), convex exterior mirror (right), exterior mirror in body color, roof spoiler, e-tron charging system, door sills with aluminum inserts, 85 kW electric motor (hybrid drive), driver assistance system: evasive maneuver assist, driver assistance system: brake assist (Audi pre sense front), driver assistance system: lane departure warning, windshield Heat-insulating glazing, velour floor mats, hybrid, hybrid 150 kW (engine 1.4 ltr. - 110 kW TFSI), interior: decorative inlays, accent parts in the dashboard in black glass look, Isofix mounts for child seat, body: 4-door, electrically operated child lock, 2-zone comfort automatic climate control, head airbag system (Sideguard), rear headrests (3-way), charging cable for public charging stations (e-tron), charging cable with industrial plug (16 A / 400 V), charging cable with Schuko plug, steering column (steering wheel) mech. Height/length adjustment, alloy wheels, illuminated vanity mirror, multi-media interface MMI Basic Plus / MMI Radio Plus, non-smoking package, gasoline particulate filter (OPF), electro-mechanical parking brake, digital radio reception (DAB), tire repair kit, tire pressure monitoring system, low emissions according to the Euro 6d emissions standard, front side airbags, seat occupancy recognition for seat belts, standard chassis, auxiliary air conditioning, start/stop system, socket (12V connection) in the front center console, bumper version: advanced, universal interface Bluetooth

Condition: as good as new (ex-display), functionality: fully functional, The Format4 creator 950 in a wide range of equipment variants - your CNC machine for individual woodworking challenges. Efficient CNC processing at a fair price - this principle is at the heart of the creator machine series. All models are attractively equipped with the latest CNC technology and can be customized to meet specific requirements. The creator 950 is not only an easy and safe entry into the CNC world, but also serves to relieve your CNC machining centers. Your advantages at a glance: Concentrated CNC technology on a footprint of just 5 m² All-inclusive: 4-sided formatting as standard Get started right away: Maximum productivity without set-up times No suction cup and console positioning Use from interior fittings to room doors Traditional processing from above - extremely simple loading Intuitive control via control panel Easy to understand software Best suction result High-end at the best price in every configuration Carcass processing with Lamello Clamex-P Additional equipment: C19 2nd stop reference cylinder for long workpieces C71 Folding support tables front+rear - roller table C198 Pick-up space for tool and unit change C200 4-fold linear changer for use of units C233 Holder for crane transport C490 F4design (incl. 3-axis PP) Ibodpou Eg A Ujfx Anmsa 800 E-Learning F4Design Creator processing field: Travel of the axis X= 1475mm (bracket) Y=1550mm Z= 225 mm Working field X= 3500 mm (infinite) or 130 kg maximum load Y= 950 mm Z= 80 mm Machinable workpiece Equipped with: High-performance PC 24" LED color display Keyboard, mouse and mouse pad 1 USB interface

Condition: new, Year of construction: 2023, operating pressure: 1,000 bar, fuel: diesel, Kärcher HD 9/100 De Skid Advanced High pressure cleaner with up to 1000 bar This is an unused exhibition device! Current manufacturer RRP €80,000! The machine is being sold as a used machine with no return, guarantee or warranty. Iedpjvz Aq Aefx Anmjba Net price €24,900 // Gross price €29,631 - Viewings possible! - Shipping can be organized nationwide, costs €300 - We would be happy to have our leasing partner create an attractive leasing/financing offer for you!

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package Ijdpfxorp Dyre Anmsba - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Wolke M 600 advanced labeling system controller Device is in very good condition ( like new ) Iedpfx Ansp T Uiqemsba 230 V 50/60Hz Accessories: Rotary encoder for Wolke printer Splitter box for Wolke printers Print head for Wolke printer You are welcome to come by for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: new, Year of construction: 2022, Vertical high-performance machining center FANUC Robodrill α-D21LiB5 ADVANCED Control: FANUC 31i-B5 Travel ranges X / Y / Z: 700 / 400 / 400 mm Distance spindle nose - table: 180 - 580 mm Clamping area: 850 x 410 mm Max. table load: 400 kg Max. spindle speed: 24,000 rpm Spindle power 1 min / S1: 26 / 5.5 kW Torque 1 min / S1: 35 / 7.5 Nm Programmable feed rate: 30,000 mm/min Rapid traverse all axes: 54 m/min Acceleration X / Y / Z: 1.4 / 1.0 / 1.6 G (at table load 100 kg, tool 2 kg) Number of tool positions: 21 Tool holder: BBT 30 Max. tool length: 250 mm Max. tool diameter: 80 mm Max. tool weight: 4 kg Tool change chip to chip: 1.3 s (at tool weight 2 kg) Positioning accuracy (ISO 230-2): < 0.006 mm Repeatability accuracy (ISO 230-2): < 0.004 mm Automatic side door on the right Machine door Transformer AI - Contour Control II TWP - Indexing command for swiveling machining plane High Speed Smooth TCP Ibjdpfx Ansg If Sgemja Original FANUC warranty 12 months

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Iedpfx Anjyrnciomjba Location: Schierling

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox AdvancedPunch Pro&eWire” wire-binding system. Items for sale: 1x Xerox AdvancedPunch Pro&eWire with the following accessories: Includes A-FN08 (C/Z Folder) Includes A-FN13 (PR Finisher) Iodpfx Anezpwt Demoba Includes ZVC-1 (PR Interface Module) Condition: This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested for proper function Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, please feel free to contact us directly.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand black-and-white photocopier, the ‘Canon iR Advance DX 6860i’. Item for sale: 1 x Canon iR Advance DX 6860i with the following features: Includes duplex Includes ADF / R-ADF Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,063 pages Condition: Iedozb Akaopfx Anmoba This listing is for a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order. A test print can be seen in the photo Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, In this offer you acquire a new colour multifunctional system "Canon imageRUNNER Advance DX C3822i". Item for sale: 1 x Canon imageRUNNER DX C3822i with the following equipment: incl. original feeder incl. base cabinet for consumables various pictures show optional equipment which is not part of this advertisement Condition: This offer is for a new device which is packed in the original box. The illustrations are example pictures Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Ibjdpfx Anei Hchtemea Seaworthy packaging and worldwide shipping are available on request! For more information, you can of course also contact us personally.

Condition: used, functionality: unexamined, fuel type: diesel, color: orange, overall weight: 34,190 kg, number of seats: 1, mast type: mono, Year of construction: 2010, operating hours: 15,658 h, Equipment: CE marking, air conditioning, cabin, onboard computer, steel tracks, Hitachi ZX350LCN-3 tracked excavator Ibjdjznwhlopfx Anmea Year: 2010 15,658 hours Used machine More information available on the Almerisan website.

Condition: used, fuel type: diesel, fuel tank capacity: 42 l, Year of construction: 2024, operating hours: 560 h, Empty weight: 3.700 kg Ibsdpjy Nw D Sofx Anmea Dimensions (LxBxH): 453 x 155 x 248 cm Engine type: Yanmar 3TNV88 Digging depth: 2.33 m = Additional options and accessories = - Digger blade

Condition: used, fuel type: diesel, empty load weight: 43,300 kg, operation weight: 43,300 kg, first registration: 06/2007, total width: 25,500 mm,

Condition: good (used), Safety relay, safety control, emergency stop switch, switching device, safety sensor, safety switching device, evaluation device Iodonbhlbspfx Anmoba -Manufacturer: Pilz, safety relay safety switching device -Type: PNOZ X3 -Id. no.: 774310 -Number: 7x relays available -Price: per piece -Dimensions: 45/90/H120 mm -Weight: 0.4 kg/piece

Condition: new, Year of construction: 2026, functionality: fully functional, Table dimensions: 730 x 210 mm Number of T-slots: 3 Drilling capacity in cast iron/steel: Ø 25 mm / Ø 30 mm Max. face mill diameter: Ø 76 mm Max. end mill diameter: Ø 20 mm Table longitudinal travel: 500 mm Table cross travel: 210 mm Spindle taper: Morse taper 3 Spindle stroke: 120 mm Spindle speed range: 100 – 2080 rpm Iodpozg Hfwofx Anmoba Max. distance spindle nose to table: 440 mm Motor power: 1.5 kW Weight (Net/Gross): 280 / 310 kgs Packaging dimensions: 950 x 760 x 1150 mm Equipment, Accessories - Sheet metal base - Coolant system with tank and pump - Tapping function - Machine light - Automatic feed and rapid traverse on table longitudinal travel

Condition: used, Year of construction: 2008, operating hours: 10,526 h, 2008 | Hitachi ZX350LC-3 with standard earth boom and long-front boom | Used Demolition Excavator | 10526 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 66000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 50 approved ✅ 13 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Some small repairs to be anticipated, maintenance followed with complete history: handlers, numerous hoses, seals, belts... An excavation boom and a long demolition arm approximately 14 m in length. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40542 Equippo" is commonly used when looking up more details online. Iedpfx Aoy Azpxenmeba 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2014, condition: used, Operational condition unit. Iodjy U Hpnepfx Anmoba Ask for specification and quotation.

Condition: new, functionality: fully functional, mileage: 250 km, power: 125.03 kW (169.99 HP), first registration: 07/2022, fuel type: diesel, empty load weight: 2,370 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 4,800 mm, Year of construction: 2026, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, cable winch, central locking, cruise control, electronic stability program (ESP), full service history, non-smoking vehicle, onboard computer, power assisted steering, power mirror, tire pressure monitoring, trailer coupling, Sliding platform COULISSALU 3.5 high-quality extruded Aluminium platform 4990x2060 Radio remote control for platform and winch Slide for winch Electric winch WARN -steel CABLE Towhook High flyer with LED lightbar and worklights Ijdpfx Ajy D Athenmoba Profiled railings with 12 lashing points Electric tray control box with integrated fuses Manual winch and ball translation on platform 2 galvanized wheel chocks Toolbox

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine Ijdpfxexazvde Anmoba * P-Line (fully hydraulic rotary quick coupler with OQ40-5 mount) * 300mm rubber track * 1,720mm arm * complete piping * Overload warning system * Engine power 18.8 kW * Operating weight 4,040 kg * 2 x digging buckets (300mm and 500mm) and 1 x hydraulic ditch cleaning bucket

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine * Year of manufacture: 2025 * Yanmar low-emission engine 3TNV88 with Stage V (TIER 5) – output 18.0 kW (24.6 HP) * Operating weight: 3,720 kg * 300 mm rubber tracks * Monoblock boom * Arm 1,520 mm * Dozer blade * Fully piped/hydraulic lines fitted * Boom cylinder with load-holding valve and overload warning device Ibsdpfxexazpko Anmja * Arm cylinder with load-holding valve * Mechanical quick coupler MS03 * 2 x digging buckets 300 mm and 600 mm * 1 x hydraulic grading bucket 1,200 mm * 3 years warranty