Used Vertical Spindle Surface Grinder for sale (22,805)

Condition: excellent (used), functionality: fully functional, cutting height (max.): 1,250 mm, Vertical bandsaw SCHULTE Type VB12 Bledpjyivhnsfx Aqwel The machine is fully operational and functional – with new electrical installation and control system. The set includes feeders, conveyors, and operator cabin – all visible in the photos. Max. cutting height: 1250 mm Max. diameter of processed log: 1450 mm Length of hydraulic carriage: 5700 mm Main motor power: 55 kW Exact dimensions are shown in the drawing attached in the photos.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 122899, only for sale as a set: Espresso machine SCHÄRF VIENNA 2G, No. 122899 white, two-group with electronic grinder SCHÄRF Mazzer STARK S/X-mill-Protect-S Bedpfx Aqjy Atzmjwjll grinder LUIGI Super Jolly V pro e Unfortunately, the year of manufacture is not listed on the invoice. The espresso machine and grinder were purchased in December 2022. The equipment can be inspected on site by prior appointment.

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 800 mm, Travel (Axes) X Axis (mm): 850 Y Axis (mm): 500 Z Axis (mm): 550 Table Table dimensions (mm): 850 x 500 Max load capacity (kg): 350 Pallet change time (seconds): 12 Spindle Spindle speed (rpm): 12,000 Spindle taper: No. 40 Feed Rates Rapid traverse X/Y/Z (m/min): 36/36/36 Cutting feed rate (mm/min): 1–20,000 Tool Change System Tool holder: BT-40 Pull stud: 90° Tool magazine capacity: 32 positions Max. tool diameter with adjacent tools (mm): 75 Max. tool diameter without adjacent tools (mm): 150 Max. tool length (mm): 200 Max. tool weight (kg): 7 Tool-to-tool change time (sec): 1.5 Power Spindle motor power (kW): 11/15 Dimensions Installation footprint (mm): 3500 x 2300 x 2500 Net machine weight (kg): 6,700 MT 800P CONFIGURATION - CE conformity declaration - Fanuc 0iMD Bedpfey Ayk Uox Aqwsll - Main transformer 380-200V/50Hz - 11/15 kW spindle motor - Spindle speed 10,000 rpm, DIRECT DRIVE - High-pressure coolant system, 20 Bar - Spindle chiller - Upgraded roller guideways - BT 40 - 32-position tool magazine - Pneumatic chip cleaning system - Maintenance tool kit - Programming and maintenance manuals in Italian - Integrated work light - Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table width: 600 mm, table length: 900 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis MORI SEIKI DURA VERTICAL 5060 was manufactured in 2007. It features a travel distance of 600 mm in the X-axis, 530 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a table size of 900 x 600 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DURA VERTICAL 5060 vertical machining centre we have for sale. Contact us for further details. • Travel X: 600 mm Bjdozwvkkopfx Aqwell • Travel Y: 530 mm • Travel Z: 510 mm • Table Length: 900 mm • Table Width: 600 mm • Table Load: 500 kg • Spindle Speed: 10,000 rpm • Spindle Taper Options: SK40 / BT40 • Tool Positions: 30 Technical Specification Taper Size SK 40

Condition: excellent (used), Catalogue number 7784 TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment Bjdpfozwwd Esx Aqwell - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Surface Grinding Machine ERNAULT SOMUA FU 660 Travel X: 660 mm Travel Y: 400 mm Travel Z: 400 mm Magnetic chuck BRAILLON 700 x 300 mm Grinding wheel: Ø 355 mm Motor power: 7,5 CV Swivel head Automatic diamond cutting Auto stepover X - Y - Z Lubricant tank Hydraulic Group Voltage: 220 V Tri Length: 2900 mm Depth: 2000 mm Total height: 2200 mm Weight: approx 4,5 T Bodpszwxf Rofx Aqwoll

Condition: new, Year of construction: 2023, total length: 3,700 mm, • 8x Batterie, 215-260AH • 1x Steckdose im Korb • FI-Schalter • Generator • eingebautes Ladegerät • Maximaler Bodenauflagedruck 14,0 kg/cm2 • Fahrgeschwindigkeit – abgesenkt 6,0 km/h • Wenderadius – außen 2,60m • Wenderadius – innen 0,75m • Steigfähigkeit 30% • Arbeitshöhe 12,65m • Arbeitsbereich (Standard-Plattform) 6,05m • Knickpunkthöhe 7,12m • Schwenken (nicht Endlos-Drehung) 345° • Plattformtragfähigkeit 1 200 kg • Korbarm – Gesamtlänge 4,14m • Korbarm – vertikaler Arbeitsbereich 120° (+60° / −60°) • Hintereinstieg mit Schieberiegel Bljdpozwx Ncjfx Aqwel • Voll proportionaler Joystick für Fahr- und Hubbewegung mit integrierter Wippe zur Daumenlenkung • 2 Mini-Joysticks ermöglichen eine proportionale Steuerung der Hub- und Senkbewegungen von Mast und Korbarm • 4,14 m Gelenkausleger • Funktionsaktivierung mit vergrößertem LCD-Statusdisplay • Lastüberwachungssystem • Wechselstromanschluss im Arbeitskorb • Große Werkzeugablage • Direkter, elektrischer Zweiradantrieb • Bürstenlose Wechselstrom-Antriebsmotoren • Schnellere Batterieaufladung • Automatische Stromsparfunktion bei Stillstand • Funktionsdrosselung bei Tiefentladung • Bordeigenes Diagnosesystem mit integriertem Display • Automatische Hinterradbremsen • Gewölbte Schutzhauben aus Polyester • Motorbetriebenes Schwenken der Plattform • Hochleistungsfähiger Stahlrollen- Hubmast, um 345° schwenkbar • Kettendurchhangerkennung • 3° Neigungsalarm mit Warnleuchte • Rahmenbreite 1,20 m • Hebe- und Zurr-Ösen • Schlüsselgesicherter Wahlschalter für Bodensteuerung • Batteriestandsanzeige • Betriebsstundenzähler • Hupe • Fahrausrichtungssystem • Gurtzeug-Ösen • Xenon-Rundumleuchte • Manuelle Notabsenkung • Passive Lochfahrschutz • Bereifung (abriebfest) 457 x 178mm • Elektrisches System 48V Gleichstrom • Batterien (tiefentladbar) 4 x 48 V – 260 Ah • Batterieladegerät Im Fahrzeug, 110 V / 230 V HF • Antriebsmotoren 2 Wechselstrommotoren • Elektrischer (Pumpen-)Motor 3,5 kW, 48 V Gleichstrom • Hydrauliksystem Hydraulikbehälter 15 l

Condition: used, Sicma brand double horizontal drilling and oscillating machine with 3 drilling spindles and 1 oscillating spindle, used. Bsdpfezxg Ivsx Aqwsll

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Blsdpfezwa Rbex Aqwjl Control: Siemens SINUMERIK 840D sl Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Directly from a mold-making shop: DECKEL MAHO DMC 70 V Control system: Heidenhain TNC 426, manual control panel HR 410, X/Y/Z 700x550x500, spindle taper size 40, 18000 rpm, 30-tool automatic tool changer, direct path measurement, internal coolant system 40 bar, enclosed cabinet, chip conveyor, LTA emulsion mist extraction system, Year of manufacture: 1999, only 14,400 spindle hours EUR 11,900,- + VAT * Machine from the first owner, has only been used as a standby machine for some time, test runs and geometric measurements can be carried out at any time. * Prices ex works, internal transportation and loading included. Bedozwdfvspfx Aqwell

Condition: used, Year of construction: 2006, CNC Vertical Turning Lathe: Siemens Sinumerik control, connection rating approximately 42 kW, rated current 63A, total weight approximately 6500 kg. Blsdjzwfz Sopfx Aqwel Data: Chip Conveyor (Sermeto): year 2007, serial no. 6901979. Data: Coolant Filter System (W+W Filtersysteme ME-FI 600): serial no. 503458/3, year 2005.

Condition: used, Year of construction: 1983, Surface Grinding Machine MONOPRECIS 1DR Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1983 Manuel Magnetic chuck dimensions: 2500 x 130 mm Max Grinding wheel dimensions: Ø 170 mm Diamond system Manual movement Voltage: 380 V Dimensions (L x W x H): 1300 x 1200 x 1800 mm Weight: approx 800 kg Bjdpfxszwgq Is Aqwoll

Condition: used, Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Voltage: 380 V Bodpfx Aqezwgtvjwsll Width: 600 mm Depth: 400 mm Total height: 1100 mm Weight: approx 80 KG

Condition: good (used), Year of construction: 1998, Deckel Maho DMU 103V Year of manufacture: 1998 Control system: - Siemens 810D (Shopmill) Bsdpfxozwg E Ej Aqwsll Main spindle: - max. 8000 rpm Travel ranges: - X-1000, Y-600, Z-600 mm Work table: - Clamping area 1200 x 600 - max. table load 800 kg Tool changer: - 24 magazine positions Availability: - Immediate

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Bsdpfxjzwhk No Aqwell Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Bodpfxezw Dvbs Aqwell Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: used, Vertical Milling Machine Droop & Rein type FS130 Bledpozw D R Sofx Aqwel Travel X: 2000 mm Travel Y: 1000 mm Travel Z: 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation: from 31,5 to 1600 RPM Table size: 2400 x 1070 mm Throat depth: 950 mm Tilt head Spindle motor: 22 kW Scale HEIDENHAIN 3 axes Year of construction: 1976 New electrical panel in 2006 Voltage : 380 V Width : 3500 mm Depth : 4700 mm Total height : 4500 mm Weight : 26 T

Condition: good (used), Year of construction: 2006, machine/vehicle number: JP-F 0018, Offer 26230 Bedpfezw D Spox Aqwsll Technical data: - Maximum load capacity: 3000 kg - Maximum clamping diameter: 1700 mm - Faceplate diameter: 530 mm - Rotational speed, electrically continuously adjustable: 0.1 to 2.7 rpm - Right and left rotation - E-stop foot switch - Welding current transmission: approx. 600 A - Drive: 400 V / 0.2 kW - Space requirement: approx. W 1000 x H 1250 x D 1200 mm - Weight: approx. 550 kg

Operating hours: 2,514 h, condition: excellent (used), functionality: fully functional, For sale the surface grinding, polishing machine THIBAUT Type: GB 505 in very good working condition with ONLY 2514 working hours ! Bljdpfx Aezw Ea Usqwel max working dimensions: 3 x 1,6 m

Condition: excellent (used), Year of construction: 2010, Data: XYZ: 600/400/460 mm Spindle speed: 10,000 rpm Bledpfszw T R Uox Aqwel Heidenhain TNC 620 control unit Spindle: SK 40 Internal coolant system: 20 bar CNC Nikken / 4-axis, D 200 mm Oil mist extraction system Chip conveyor

Condition: excellent (used), Year of construction: 2023, Swivel spindle milling machine Manufacturer: Hofmann Bledpfx Aqsztzntewel Type: TFS 107 Year of manufacture: 2023 Swivel range: -45.5° to +45.5° Table: 2,000 x 813 mm Table height: 890 mm Power: 7.5 kW Speed: 1,500 - 10,000 rpm, stepless speed adjustment Spindle diameter: 30 mm / 40 mm Vertical adjustment: 145 mm Tool holder: MK5 Feed: Yes Motor brake: Yes Dust extraction port diameter: 120 mm Weight: approx. 820 kg Included: - Augner stop jaws - 40 mm spindle

Condition: used, Suitable for steam heating capacity 800L. all stainless steel double jacket tiltable drum Bsdpfezux Dbex Aqwell stirring system with scrapers with mixer steam (4 bar) dimensions (l x w x h) : ± 2.600 x 2.200 x 2.700 mm

Condition: used, Swivel spindle milling machine Manufacturer: Schröder Table dimensions: - Width 1,260 mm + 430 mm extension - Depth 770 mm + 400 mm extension Bledszuyw Njpfx Aqwel Spindle diameter: 30 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Technical specifications - Robust steel frame construction - Dust-protected linear guides Bodezutp Sjpfx Aqwjll - Digital servo drives on the X, Y, and Z axes - X-axis with rack and pinion drive - Y and Z axes with ball screws - Rapid traverse rate: X/Y axes: up to 50 m/min - Z-axis: up to 15 m/min - Maintenance-free servo motors with high-resolution encoders - Integrated extraction system for machining units - Additional extraction connections - Manual loading and unloading of workpieces - Pneumatic positioning stop - Work area - Workpiece length: 200-3,050 mm (with roller conveyor) - Workpiece width: 50-1,250 mm - Workpiece thickness: 8-80 mm - Electrical data - Power supply: 400 V / 50 Hz - Optional equipment - Air-conditioned control cabinet for operation at temperatures above 35°C - ECO-Plus energy-saving mode with automatic standby, drive shutdown, and control shutdown

Condition: good (used), Year of construction: 2015, functionality: fully functional, Siemens 808D control system, Travel range XYZ = 500 mm x 300 mm x 300 mm, 12-position tool changer, Bjdpozuuk Dofx Aqwell Tool holder BT40, Spindle speed 8,000 rpm, Blum touch probe for zero point determination.