Used Wehrle Werk Cutting Table for sale (27,024)

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions Todpet E Nw Tsfx Aklea

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. Todpfx Akozlt Ayeloa The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min weight 4980 kg dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 12 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set Tedpfsxv D T Rox Aklea CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 25 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 6 kW Tsdewh Ulqopfx Aklsa 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 20 mm STAINLESS STEEL 18 mm ALUMINUM 14 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available - Number of drilling heads: 1 | Tool positions per drilling head: 6 - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B). Todpfxex H T H Re Akloa

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 24,000 kg, sheet thickness steel (max.): 60 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO B254 - CNC PUNCHING, DRILLING & THERMAL CUTTING CENTER | YEAR 2015 The Ficep Tipo B254 is a CNC-controlled punching, drilling and thermal cutting center for the complete processing of steel plates and flat products in a single pass. Punching, drilling, countersinking, tapping, marking and thermal cutting via plasma and oxy-fuel are carried out on one machine without intermediate handling. CONDITION Used - technically sound. The machine is currently in productive operation and CAN BE INSPECTED UNDER POWER (by appointment). Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The system combines three processing units in one CNC-controlled line: hydraulic punching unit (1000 kN), drilling head (20.1 kW) and thermal cutting unit with plasma torch (Hypertherm HPR 260) plus oxy-fuel torch. All processes run via the Mitrol CNC as automated machining cycles; the machine processes steel plates up to 2540 x 6000 mm. Tjdpexn T H Defx Aklja Typical applications: structural steel fabrication, structural engineering and prefabrication of gusset plates, end plates and connection plates. TECHNICAL DATA - Machine type: Automatic CNC punching and thermal cutting system for plates - Year: 2015 | Serial number: 34201 | Machine weight: 24,000 kg - Working height: approx. 1,090 mm | Max. positioning weight (plate): 5,000 kg - Max. plate size: 2540 x 6000 mm | Min. plate width: 508 mm - Punching force: 1000 kN | Stripping force: 100 kN | Punching tools: 8 - Max. punch diameter: 32 mm | Max. punching thickness: 20 mm - Drilling heads: 1 | Drilling tools per head: 8 - Max. drilling diameter: 40 mm | Max. drilling thickness: 100 mm - Spindle power: 20.1 kW | Max. spindle speed: 4000 rpm - Plasma torches: 1 | Oxy-fuel torches: 1 | Plasma source: Hypertherm HPR 260 - Max. plasma cutting thickness: 35 mm (pierce start) / 60 mm (edge start) - Max. longitudinal feed speed: 30 m/min - CNC control: Mitrol CNC (master/slave), online remote diagnostics - Processes: punching, drilling, countersinking, tapping, milling, marking, scribing, oxy-fuel and plasma cutting Min. plate length, max. overall material thickness and cross positioning speed are confirmed during inspection. SCOPE OF DELIVERY - 1 x Ficep Tipo B254 plate processing center (year 2015) - 1 x Hydraulic punching unit 1000 kN with 8-position tool changer - 1 x Drilling unit 20.1 kW with 8-position tool changer - 1 x Plasma cutting torch | 1 x Oxy-fuel cutting torch - 1 x Hypertherm HPR 260 plasma cutting system - 1 x Marking unit (configuration to be confirmed during inspection) - 1 x Chip conveyor - 1 x Donaldson Torit dust extraction system | 1 x Punching tool set LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in Ficep structural steel machines. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing under power | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: like new (used), Year of construction: 2020, functionality: fully functional, FICEP KRONOS KR25SP - CNC GANTRY PLASMA CUTTING SYSTEM FOR STEEL PLATES | YEAR 2020 The Ficep Kronos KR25SP is an automatic CNC gantry system for high-definition plasma cutting of steel plates, designed for steel construction and sheet metal fabrication shops that need precise, repeatable and cost-efficient parts directly from plate. With a maximum plate size of 2,540 x 6,000 mm and a plasma cutting thickness of up to 50 mm, it covers a broad range of parts in a single pass. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. The machine is fully functional and can be put into production immediately. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR25SP cuts steel plates fully automatically according to CNC program in gantry design. Using Hypertherm plasma technology including True-Hole technology, it produces contour-accurate cut parts and hole patterns at high cut quality - ideal for gusset plates, end plates, base plates and connection components in steel construction. The robust grid cutting table is prepared for connection to an extraction system; a network remote-diagnosis interface supports maintenance and support. TECHNICAL DATA - Manufacturer: Ficep S.p.A., Italy | Model: Kronos KR25SP (KRONOS SP series) - Machine type: Automatic CNC gantry plasma cutting system for steel plates - Year of manufacture: 2020 | Serial number: 36499 - Condition: used, refurbished by certified technician - Maximum plate size (W x L): 2,540 x 6,000 mm - Max. plasma cutting thickness: 50 mm - Plasma straight-cut torch: 1 | Plasma unit: Hypertherm XPR300 - Hypertherm True-Hole technology: available - CNC control and drives: Fanuc (to be confirmed on the machine during inspection) - Remote diagnostics: available (network connection) - Cutting table: robust grid construction, prepared for extraction system - Extraction and filter system: optionally available Further details (machine weight, connected load, footprint, cutting speed) are available on request. SCOPE OF DELIVERY - 1 x Ficep Kronos KR25SP gantry system (year 2020) - 1 x plasma straight-cut torch (Hypertherm XPR300) Tsdsv Iaqyopfx Aklsa - Grid cutting table with extraction preparation - CNC control and drives - Remote-diagnosis interface (network) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border - short transport distance from the entire DACH region. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is your specialist for refurbished Ficep steel construction machinery. We supply inspected, ready-to-operate systems for steel construction and sheet metal fabrication. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: good (used), Cutting machine EBA 551-06, Item no. L1121 Todpfx Akex Rclkjlea

Condition: new, thread dia. bis M 36 Tsdpfjy Umd Esx Aklea turning speeds max. 150 U/min thread M5 - M36 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 4.0 kW weight - pallet system 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. Tjdpfx Aoy Umdljklea work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: M1-010090-D1, total height: 1,100 mm, construction height: 200 mm, lifting height: 900 mm, load capacity: 1,000 kg, lifting power: 1,000 kg/m, total length: 1,350 mm, total width: 800 mm, input voltage: 400 V, HYMO lifting table, Ex version Ex version II 3D Ex tc ec mc h IIB T-125°C IP 5X nDC Tjdpfx Ajzpg H Hskloa Stainless steel top

Condition: used, Year of construction: 1994, Machine length: 2800 mm Length stop: Fixed, 90° Duplex cutting system Cutting width: 1300 mm with manual adjustment 7.5 kW No pre-scoring device Todpfx Akezh Hwcslsa Location: Nattheim

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Machine is sold on customer order. Format sliding table 3200 mm with high-quality X-roller system Electrically adjustable height adjustment, maximum cutting height 133 mm Electric bevel adjustment 90° - 45° Motor power 7.35 kW (10 hp) 3 saw blade speeds 3500/4500/5500 rpm X-Motion touch screen control Electronic positioning for saw blade height/bevel adjustment/parallel fence Tool database and automatic cutting programs Tsdpszp Nw Isfx Aklja Programs for grooves, groove series, rebates, and miter cuts Scoring unit, 2-axis, height/width adjustment Outrigger 1250 x 650 mm with digital angle display Rip fence 3200 mm, swiveling 90° - 45° Quick-Lock quick-change system for the main saw blade

Year of construction: 1970, condition: ready for operation (used), Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible. Tsdpszqu Hqsfx Aklsa

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode Todszqnxtopfx Aklea - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: new, Cutting nozzles, Zinser Type: ZHD Propane Year of manufacture: NEW Cutting nozzle ZHD-P 235 3100 202 6-10 mm Tjdozq Akdopfx Aklea Cutting nozzle ZHD-P 235 3100 203 10-20 mm Cutting nozzle ZHD-P 235 3100 204 20-30 mm Cutting nozzle ZHD-P 235 3100 206 45-60 mm Cutting nozzle ZHD-P 235 3100 207 60-80 mm Cutting nozzle ZHD-P 235 3100 208 80-100 mm Cutting nozzle ZHD-P 235 3100 209 100-160 mm Cutting nozzle ZHD-P 235 3100 210 160-230 mm Cutting nozzle ZHD-P 235 3100 211 230-300 mm Heating nozzle ZHD-P 235 3090 212 3-100 mm Heating nozzle ZHD-P 235 3090 111 100-300 mm 31726

Condition: used, functionality: unexamined, If you need more details, feel free to write. Tjdpjwp Dfcsfx Aklea

Condition: ready for operation (used), Edmo Lift CB 1500 B Scissor Lift Table, Lift Table Dimensions: 1500mm x 1000mm Max. load capacity: 1500 kg Year of manufacture: 2014 Min. height: 200mm Max. height: 1230mm Lift: 1000mm You are welcome to visit us for an inspection. We can also arrange cost-effective transport for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Tjdpezq Dbqofx Akloa Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Edmo Lift CB 1500 B Scissor Lift Table Dimensions: 1500mm x 1000mm Max. load capacity: 1500 Kg Year of manufacture: 2020 Min. height: 200mm Max. height: 1230mm Lift: 1000mm Tjdezq A Tlopfx Akloa You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Edmo Lift CB 1500 B Scissor Lift Table Dimensions: 1500mm x 1000mm Max. load capacity: 1500 kg Year of manufacture: 2015 Min. height: 200mm Tjdpfxjzq A Suj Akloa Max. height: 1230mm Lift: 1000mm You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2007, operating hours: 1,650 h, power: 5.5 kW (7.48 HP), cutting height (max.): 130 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 4,000 rpm, total length: 3,200 mm, total width: 2,100 mm, total height: 1,900 mm, overall weight: 1,300 kg, Equipment: CE marking, documentation/manual, scorer, No. 04550 Sliding table saw Martin T 60 CLASSIC Used, year of construction 2007, approx. 1650 operating hours Sliding table length 3000 mm Cutting width 1250 mm Saw blade diameter 250 - 400 mm Saw blade bore 30 mm Max. cutting height 130 mm Motor power 5.5 kW Speeds 4000 / 4800 / 6000 rpm, with digital display Pneumatically controlled 2-axis scoring unit Motor power scoring unit 0.75 kW Electric saw blade tilt adjustment from 0° to 46°, with digital display Electric cutting height adjustment, with digital display Manual cutting width adjustment by handwheel, with digital display Tool-changing system SprintLock Machine operation via touchscreen Various cutting programs, including programs for rebating, grooving, cutting angled strips, slotting and tenoning, as well as chain dimensioning Cross-cut table approx. 1300 x 650 mm LW Extendable cross-cut fence up to 3200 mm, with 2 flip stops 2 extraction ports, diameters 120 and 100 mm Including complete technical documentation, 2 saw blades and 3 riving knives Transport dimensions approx. 3200 x 2100 x 1900 mm LWH Weight approx. 1300 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Todpfszq Aqwjx Akloa Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 08-05-10, functionality: fully functional, Machine is available in the short term. Sale is on behalf of the customer. Machine can be inspected at the seller's location. F 4506 Panel Saw M 18121 Panel Saw F 45 ELMO III M 34014 Double Roller Carriage with carriage length of 3800 mm M 44230 Cutting width 1300 mm CNC M 51026 Drive power 5.5 KW Vario M 64101 Saw blade diameter 500 mm M 64113 Control panel at eye level (package) M 44300 Front table, adjustable M 62002 Template holder (package) M 64014 Second support on the double roller carriage STEG Todpfx Akszpyzdolea M 64200 Quick clamping device, manual M 24007 3-axis scoring unit RAPIDO Plus M 41005 Table extension 840 mm M 44501 Angle/miter fence 3200/DIGIT_L

Condition: ready for operation (used), NIKKEN 5 AX -170 CNC / Rotary Table incl. Controllers -TYPE 5-axis -AX 170 CNC / Rotary Table -The NIKKEN / 5 AX -170 is a compact and robust CNC swivel table for precise drilling and milling operations in 4- and 5-axis machining. -Complete documentation available. -Well-maintained overall condition. Overall dimensions: L x W x H 780x340x280mm Errors and omissions excepted. Tsdpfx Akjzqg I Holoa

Condition: used, PARPAS Type AU engraving tool grinding machine Manufacturer's No. 854/36 Year of manufacture 1971 Grinding wheel diameter 100 mm Grinding spindle speed approx. 3500 rpm Todjdzp T Topfx Akloa Motor power approx. 0.55 kW Mains connection 380 volts, 50 Hz - Collet chuck (DECKEL system with S20x2) - Collet chuck Ø 15.0 mm - Diamond grinding wheel dresser for the face of the grinding wheel Space requirement L x W x H 700 x 350 x 450 mm Weight approx. 80 kg good condition

Condition: used, Baader 684 Cutting Machine The Baader 684 is a universal cutting machine designed to cut a wide range of elongated products in half, including meat, fish, vegetables, and fruit. The machine features an infeed conveyor that transports the product towards a circular blade, which precisely cuts the product in half. After cutting, the product is transferred onto a right-angle discharge conveyor for further processing. This sausage cutter is particularly well-suited for cutting sausages quickly and efficiently. Technical Specifications: - Production capacity: Up to 1,200 pieces/hour - Infeed opening (W × D × H): 600 × 165 × 165 mm - Blade diameter: 498 mm - Voltage: 400 V (3+N, 50 Hz) Tedpfxjzn I S Ij Aklea - Power: 1.5 kW - Machine dimensions (W × D × H): 1,950 × 2,300 × 2,000 mm