Used Weinig Four-Side Moulder for sale (23,764)

Condition: used, Four-side planer Hedpfxslc Id Io Aqgjfn

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) Hfodexz Hh Uopfx Aqgjn ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Hsdpfx Aqoxgkf Ujgsfn Technical specifications: Length of jointer table: 2100 mm Diameter of tool spindle: 30 mm Diameter of planer heads: 100 mm Planer spindle speed: 6000 rpm Working width: 30 - 180 mm Working height: 6 - 120 mm With an optionally available smaller planer head for the left spindle plus narrower feed rollers, a minimum width of 15 mm can be achieved Motor power bottom, left, right: each 3.7 kW Motor power top (thickness spindle): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment With 1/10 increment control Including step-controlled feed roller Including planer heads Extraction ports: 160/120/120/140 mm Availability: short-term Storage location: Flörsheim

Condition: reconditioned (used), Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Hodpfx Aowwl Nloqgsfn Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: excellent (used), functionality: fully functional, Working width 220 mm Working height 120 mm 5 spindles Spindle arrangement: bottom/right/left/top/bottom Spindle diameter 40 mm Motors: 4 kW, 5.5 kW, 5.5 kW, 4 kW Hfodjzxyvmepfx Aqgjn Table length 198 cm Table lubrication Stepless feed speed adjustment Pneumatic pressure on feed rollers Head adjustment in two axes Electric adjustment of top head – 0.25 kW Feed motor power 2.2 kW

Condition: excellent (used), CATALOG NUMBER: 6679 TECHNICAL DATA - max. width of workpiece: 250mm - max. height of workpiece: 170mm 6 spindles: 1) horizontal lower 250mm, 5.5kW 2) vertical right 170mm, 5.5kW 3) vertical left 170mm, 5.5kW 4) horizontal upper 250mm, 7.5kW 5) horizontal lower 250mm, 7.5kW 6) universal 250mm, adjustable at an angle of 360°, 5.5kW - 6 spindles with electric up/down adjustment - all spindles adjustable up/down, left/right - spindle diameter: 40mm - 6 toothed, pulling infeed rollers from above, including 2 double rollers - 6 pulling outfeed rollers from above, rubber, smooth, including 2 double rollers - 2 pressure rollers from above - toothed, pulling, swiveling infeed roller from below, in the bed before the first spindle - 2 pulling outfeed rollers from below, metal, smooth - 4 side pressure rollers from below - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment on a frequency inverter: 6-30m/min - feed motor: 4kW - working pressure: 8-10 bar - electric adjustment of planing thickness - body lifting motor: 1.1kW - central lubrication of the bed - length of the infeed bed: 2180mm - diameter of dust extraction nozzles: 6x150mm - dimensions (L/W/H): 5000x1800x1900mm - weight: approx. 4600kg Hfedpezxqvwsfx Aqgsn ADVANTAGES - Made in Italy - With 6 heads - DTR + CE documentation - Ideal for both wet and dry wood - Universal spindle - In perfect condition / like new Net price: 114900 PLN Net price: 26720 EUR Net price calculated at an exchange rate of 4.3 PLN/EUR (prices may vary with significant exchange rate fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 4,800 h, load capacity: 4,200 kg, lifting height: 6,880 mm, free lift: 1,950 mm, fuel type: gas, mast type: duplex, construction height: 3,140 mm, fork carriage width: 3,100 mm, fork length: 1,800 mm, empty load weight: 7,900 kg, total length: 2,620 mm, drive type: Treibgas, construction width: 3,400 mm, Four-way side loader Load center: 600 Fork width: 150 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 355/50-15 Rear tire type: Superelastic Rear tire size: 200/50-10 Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdańsk. Visit our website - sago-online. Lease purchase and financing options are always available at favorable terms. We are also happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this C4800. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We are also happy to offer your vehicle for sale on consignment. Hfodpfxjz Ewfij Aqgon Fork positioner, Fork positioner opening range: 410 / 3,100 mm Full cabin, full free lift, Platform height: 550 mm

Condition: excellent (used), Catalog number 6765 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 160mm number of spindles 4: 1) horizontal lower 230mm, 5.5kW 2) vertical right 160mm, 5.5kW 3) vertical left 160mm – electrically adjustable right/left from the control panel, 5.5kW 4) horizontal upper 230mm – electrically adjustable up/down from the control panel, 7.5kW - all spindles adjustable up/down, right/left Hfjdpoztzmcjfx Aqgsn - spindle diameter 40mm from above: - infeed rollers, toothed, pulling, 6 pcs, including 2 double rollers - outfeed rollers, pulling, rubber, 2 pcs from below: - infeed roller, toothed, pulling, metal, twisted in the lower table + - outfeed roller, pulling, metal, smooth - rollers adjustable pneumatically - length of infeed table (with pneumatic feeder) 3390mm - possibility of operation without activating the pneumatic feeder, - table adjustable up/down - central lubrication - electric adjustment of planing thickness - stepless adjustment of feed rate - feed on Cardan shafts - feed motor 4kW - enclosed in a cabinet - diameters of dust extraction nozzles 4x120mm - dimensions (L/W/H) 7000x1950x1700mm, - weight approximately 3000kg – for wet and dry wood – pneumatic feeder on the infeed table, – used planer, very good condition Net price: 65900 PLN Net price: 15326 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: reconditioned (used), Year of construction: 2005, through feed moulder with 9 spindles and SCM control 100 PC control system Max. Working width 240 mm Min. Working width 25 mm Max. Working height 120 mm Min. Working height 10 mm Min. Work piece length 640 mm feed speed 6 - 36 m/ min, variabel Spindle DM 40 mm Usable length vertical spindles 140 mm Usable length horizontal spindles 250 mm Axial adjustment vertical spindles 0 - 80 mm Axial adjustment horizontal spindles 0 - 45 mm Min and max. Tool DM 100 - 220 mm Min. And Max. Tool DM on planer spindle 120 - 140 mm Profiling capacity of 2. Bottom horizontal spindle with tool DM 200 mm = 15 mm Power feeder motor 5,5 kW DM feeder rollers 140 mm Infekt table length 2500 mm Quick adjustment indeed table and fence 10 mm Required suction capacity 7500 m3/ h Compressed air requirement 6 - 10 bar Weight approx 6000 kg Dimension approx. L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Bottom horizontal spindle Motor 11,0 kW Spindle Speed 6000 RPM Right vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Left vertical Spindle Motor 7,5 kW Spindle Speed 8300 RPM 2. Right vertical spindle Motorleistung 7,5 kW Wellendrehzahl 8300 RPM 2. Left vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Hfsdpfx Asg Umrmoqgon Top horizontal spindle Motor 11,0 kW spindle speed 8300 RPM 2. Bottom horizontal spindle Motor 12,0 kW spindle speed 8300 RPM 2. Top horizontal spindle Motor 11,0 kW spindle speed 8300 U/min 3. Bottom horizontal spindle Motor 7,5 kW spindle speed 8300 U/ min SET - UP quick set up system reduces down times Power Lifting of the feed system and upper spindle units with 100 PC control Pneumatic opening of safety hood full Kardan feed system Feed speed variable Segmented pressure shoe before upper horizontal spindle with parallelogram movement and pneumatic pressure Fine adjustment of outfield table Pneumatic blocking of spindle in working position incl. ZIWO CL 15 automatic feeding unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Catalog number: 8061 TECHNICAL DATA - max. width of workpiece: 230mm - max. height of workpiece: 130mm - 5 spindles 1) horizontal, lower: 230mm, 4kW 2) vertical, right: 130mm 3) vertical, left: 130mm (spindles 2 and 3), 11kW 4) horizontal, upper: 230mm, 5.5kW 5) horizontal, lower: 230mm, 7.5kW - all spindles adjustable up/down, left/right Hodpfszrgarsx Aqgofn - spindle diameter: 40mm - 4 infeed rollers (top), geared - 1 outfeed roller (top), rubber, smooth - feed on Cardan shafts - rollers with pneumatic pressure - stepless feed speed adjustment via frequency inverter - feed motor: 4kW - operating pressure: 6-10 bar - electrical adjustment of planing thickness - central lubrication of the table - length of infeed table: 1970mm - diameter of dust extraction nozzles: 5x140mm - dimensions (L/W/H): 3400x1660x1600mm - weight: approximately 2500kg ADVANTAGES – German production, WEINIG brand – with 5 heads – DTR documentation (Technical Data Sheet) – used planer, very good condition Net price: 45900 PLN Net price: 10675 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Technical specifications: Length of jointer table: 2,100 mm Diameter of tool spindle: 30 mm Diameter of cutterheads: 100 mm Hfodpfsw I U Uqsx Aqgjn Cutterhead speed: 6,000 rpm Working width: 30 – 180 mm Working height: 6 – 120 mm With optionally available smaller cutterhead for the left shaft and narrower feed rollers, a minimum width of 15 mm can be achieved. Motor power below, left, right: each 3.7 kW Motor power above (thicknessing shaft): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment With 1/10 incremental control Includes cutterheads Extraction ports: 160/120/120/140 mm Availability: short-term Storage location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock Hfjdpfx Aswgwmnoqgsn 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,479 h, load capacity: 3,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, construction height: 2,850 mm, fork length: 1,100 mm, drive type: Diesel, Four-way side loader Hsdpfxsz Iuqhs Aqgsfn Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Fork adjustment device, Heater, full cabin

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 4,352 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, drive type: Diesel, Four-way side loader Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Fork positioner, heating, full cabin, Hfjdpfx Aoz Rrcboqgon

Condition: excellent (used), Catalog number 6393 TECHNICAL DATA - max. width of the workpiece 200mm - max. height of the workpiece 150mm - number of spindles 4: 1) horizontal, lower 200mm, 5.5kW 2) vertical, right 150mm, 4kW 3) vertical, left 150mm, 4kW 4) horizontal, upper 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm - spindle speed 6000 rpm From above: - 6 feeding rollers, toothed, including 2 double rollers - 1 feeding roller, rubber From below: - 1 feeding roller, toothed, twisted in the lower table - 3 side pressure rollers - 1 discharge roller, metal, smooth - all rollers are pneumatically pressed - length of the feeding table 2130mm - table adjustable up/down - central lubrication - electric setting of planing thickness - lifting motor 1.1kW - stepless feed speed adjustment on a frequency inverter - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle 4x130mm - dimensions L/W/H 3550x1750x1800mm - weight approximately 3000kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – DTR documentation – used machine, very good condition Net price: 49900 PLN Net price: 11605 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (the price may change in case of larger exchange rate fluctuations) Hedjzu R N Nopfx Aqgefn

Condition: excellent (used), CATALOGUE NUMBER 7219 TECHNICAL DATA - max. width of workpiece: 200mm - max. height of workpiece: 150mm Number of spindles: 4 1) horizontal lower spindle: 200mm, 5.5kW 2) vertical right spindle: 150mm, 4kW 3) vertical left spindle: 150mm, 4kW 4) horizontal upper spindle: 200mm, 5.5kW - all heads adjustable up/down, left/right Hedpfxezu R Rme Aqgsfn - spindle diameter: 40mm - spindle speed: 6000 rpm Top: - 6 infeed rollers (toothed), including 2 double rollers - 1 outfeed roller (rubber, double) Bottom: - 1 infeed roller (toothed, drive, adjustable in the lower bed) - 3 side pressure rollers - 1 outfeed roller (metal, smooth) - all rollers pneumatically pressed - length of infeed bed: 2130mm - bed adjustable up/down - central lubrication - electric adjustment of planing thickness - lifting motor: 1.1kW - stepless feed speed adjustment - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction port: 4x130mm - dimensions (L/W/H): 3650x1750x1800mm - weight: approx. 3000kg ADVANTAGES - with 4 heads - ideal for wet and dry wood - DTR documentation - used machine, very good condition Net price: 52900 PLN Net price: 12302 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (prices may change in the event of significant exchange rate fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,449 h, load capacity: 4,500 kg, lifting height: 5,500 mm, free lift: 1,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,880 mm, fork carriage width: 1,250 mm, fork length: 1,400 mm, empty load weight: 7,300 kg, total length: 2,750 mm, drive type: Diesel, construction width: 2,250 mm, opening width: 1,340 mm, Four-way reach truck Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 200/50-10 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 1 x 250-15 Rear tire condition: 20 - 40% Battery year of manufacture: 2014 Hfodpjz Ifpzofx Aqgsn Additional single auxiliary hydraulics, fork positioner, fully enclosed cabin with heater, 2 work lights at the front, 1 work light at the rear.

Condition: reconditioned (used), Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed speed 6-36 m/min. Dimensions (L/W/H) 4900x1700x2000 mm weight of the machine ca. 3500 kg Control SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production ----- The machine is in process of partial reconditionning at our facility at the moment. Highlights: - Machine with 6 spindles (2 with HSK mounting) - Spindle speed 8,300 rpm - Working width 240 mm, working height 200 mm - Electronic horizontal and vertical spindle positioning - PRL equipment for glazing bead separation - Air-cushion table - Touchscreen control Technical Data: Working width: max. 240 mm (kit for min. width 15 to 25 mm) Working height: max. 200 mm Feed speed: infinitely variable 6 to 36 m/min via inverter Infeed table: length 2,500 mm Machine weight: approx. 3,550 kg Dimensions: length 4,900 mm / width 1,700 mm / height 1,700 mm 1st Spindle: _____ First bottom spindle, horizontal (jointer/planer) Motor with brake, 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Tool Mount (HSK): _____ First right tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system Electronic vertical and horizontal positioning 3rd Tool Mount (HSK): _____ First left tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system with pneumatic unit Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 4th Spindle: _____ First top spindle, horizontal Motor with Brake 11 kW Speed ??8,300 rpm Electronic horizontal positioning Electronic tool diameter adjustment (setup) 5th Spindle: _____ Second horizontal top spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 6th Spindle: _____ Second horizontal bottom spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Additional technical features: _____ - 2 feed units following the top spindles to reduce the axis spacing from 620 mm to 450 mm (for short workpieces) - Driven, motorized feed roller integrated into the machine table Hodszq Hiqepfx Aqgjfn - Pneumatic hold-down pressure before the jointing spindle (can be deactivated from the control panel) - Pneumatic feed deactivation for the final unit following the 2nd bottom spindle; operable even when the sound enclosure is closed - Pneumatic "TTL" pressure elements before the first horizontal top spindle - Air-cushion lubrication in the machine table to minimize friction - Manual lubrication pump for the machine table - Central lubrication system for guideways and controlled axes - 5 x electronic horizontal positioning (positions 2 – 3 – 4 – 5 – 6) - 4 x electronic vertical positioning (positions 2 – 3 – 5 – 6) - 3 x electronic tool diameter adjustment (setup) Positions (3 – 4 – 5) - Mobile 10 control system - PRL equipment (Glazing bead package) for cutting out the glazing bead - Soundproofing and safety enclosure with electromagnetic interlock (CE standard) Dust ...

Year of construction: 1990, condition: not inspected (used), Working width: 180 mm Height: 120 mm Hfsdpsigzhhefx Aqgsn Fifth universal spindle Feed table length: 2.47 m Spindle diameter 40 mm Overall length: 4.95 m Depth: 1.64 m Height: 1.52

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 1.511.030, functionality: fully functional, planing width: 240 mm, spindle diameter: 40 mm, number of spindles: 6, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 6 Min. planing width: 44 mm Max. planing width: 240 mm Min. planing height: 18 mm Max. planing height: 150 mm Infeed table length: 1,150 mm Spindle 1 Spindle type: Horizontal spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 2 Spindle type: Vertical spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 3 Spindle type: Vertical spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Hsdpfxjzxch Eo Aqgofn Spindle 4 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 5 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 6 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Feed rate: Automatic Min. feed rate: 6 m/min Max. feed rate: 24.1 m/min Feed rate control: Stepless Conveyor motor power: 8.7 kW Conveyor drive: Cardan drive Diameter of feed rollers: 140 mm MACHINE DETAILS Control system: Schneider Voltage: 415 V Current consumption: 144.3 A Fuse rating: 200 A Connected load: 60 kW Diameter of dust extraction nozzle: 125 mm Lubrication system: Manual Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,900 x 1,800 mm Unladen weight: 2,000 kg Shipping packages: 1 unit

Condition: used, total width: 2,400 mm, total height: 2,200 mm, Year of manufacture: 2006 Colour: White Empty weight: 6.000 kg Dimensions (LxBxH): 2000 x 240 x 220 cm Price: On request - Year: 2006 - Documentation available: Yes - └ Type Documentation: Technical data, Electrical diagrams - CE marking present: Yes - Serial number: AA1/015315 - Number of spindles [pcs.]: 8 - └ Spindle 1: - - Motor power [kW]: 15 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 2: - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 3: - - Motor power [kW]: 15 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 4: - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 5: - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 6: - - Motor power [kW]: 15 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 7: - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 8: - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: Yes - Min. planing width [mm]: 25 - Max. planing width [mm]: 240 - Min. planing height [mm]: 10 Hfedpszwub Isfx Aqgen - Max. planing height [mm]: 120 - Feed table length [mm]: 2500 - Options: Automatic outfeed system, Automatic feeding system - Feeding system: - └ Brand: H&M - └ Max. feed length [mm]: 250 - Outfeed system: - └ Brand: H&M - └ Max. output length [mm]: 760 - Transport dimensions: 20000mm x 2400mm x 2200mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 230 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ----- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Hfedpfswgwmhsx Aqgsn Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment range axial 20 mm Connecting piece D = 125 mm Aspiration individ...

Condition: excellent (used), CATALOGUE NUMBER 7220 TECHNICAL DATA - min – max width of workpiece: 20 – 230mm - min – max height of workpiece: 8 – 160mm 7 spindles: 1) horizontal, lower: 230mm, 5.5kW Hfjdpfx Aeztzd Uoqgon 2) vertical, right: 160mm, 5.5kW 3) vertical, left: 160mm, 5.5kW 4) vertical, right: 160mm, 5.5kW 5) vertical, left: 160mm, 5.5kW 6) horizontal, upper: 230mm, 7.5kW 7) horizontal, lower: 230mm, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm From above: - 10 toothed, metal feed rollers, including 2 double rollers - 3 side pressure rollers From below: - side pressure roller at the infeed - toothed, feed roller, rotatable in the lower bed - 2 side pressure rollers - grooved bed - toothed, metal feed roller - smooth, metal feed roller - pneumatically adjustable rollers - length of infeed bed: 2410mm - central lubrication of the bed - electric adjustment of cutting depth - lifting motor: 1.1kW - stepless feed speed adjustment via inverter: 6-30 m/min - feed motor: 5.5kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction port: 7x160mm - dimensions (L/W/H): 5100x2190x1800mm - weight: 5400kg ADVANTAGES – with 7 heads – ideal for both wet and dry wood – DTR documentation available – used planer, very good condition Net price: 138900 PLN Net price: 32300 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may be subject to change in case of significant exchange rate fluctuations)

Condition: ready for operation (used), functionality: fully functional, max working width 500mm max working height 200mm height of side heads 10cm changenable side heads Hfjdpfx Aszz Nh Dsqgsn 2-knives shafts roll in the table manual adjustment of side heads two feed speed additional spindles in the outfeed

Condition: excellent (used), Catalog number 7640 ADVANTAGES – Best wide-belt sander for both wet and dry wood – Ideal for processing logs, flooring, etc. – 2 sanding drums + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used sander, very good condition TECHNICAL DATA - Max. sanding width 610mm - Max. sanding height 200mm - Top: - Toothed infeed roller - Ratchets - Pressure roller - 2 toothed feed rollers - Pressure roller - 610mm sanding drum, 6-knife, 15kW - Pressure rollers - Smooth outfeed roller - Bottom: - Side pressure roller at the infeed - Guide strip - Infeed table - Toothed feed roller - 610mm sanding drum, 6-knife, 7.5kW - 2 smooth feed rollers - Side pressure roller at the outfeed - Rear: 2 side spindles + pressure rollers: 1) Vertical right 200mm, 15kW 2) Vertical left 200mm, 15kW - Vertical left spindle with electric left/right adjustment - Spindle diameter 40mm - Spindles arranged in an alternating pattern - Spindles adjustable up/down, left/right 3) Additional horizontal lower spindle 160mm, adjustable up/down + left/right, 5.5kW - Spindle diameter 35mm - At the outfeed: 2 upper metal sliding rollers, 2 lower feed rollers, rubber - Adjustable rollers in the lower table - Electric sanding height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed motor 8kW Hedpfozx Suusx Aqgefn - Dust extraction port diameters: 2 x 120, 2 x 160mm - Dimensions (L/W/H): 2980x1980x1800mm - Weight approximately 3500kg Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)