Used Weishaupt Wm-L20/2-A for sale (105,574)

Condition: used, Year of construction: 2008, Technical details: Ncodolqac Sopfx Abzsw max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Njdoyug R Repfx Abzecw The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 03/2019, total length: 9,220 mm, total width: 2,480 mm, total height: 1,080 mm, suspension: air, tire size: 445/45R19.5, wheelbase: 5,170 mm, Year of construction: 2019, = Additional Options and Accessories = - 20FT connections = Notes = Well-maintained 2019 KRONE AZ18 MAXI 2-axle trailer (year of manufacture 2019) featuring ABS/EBS, BPW axles with disc brakes, 2 lift and lowering valves, height 105 cm, tires 445/45-R19.5 (tread left: 9/9 mm; tread right: 9/8 mm), unladen weight: 2,820 kg, permissible gross weight: 18,000 kg, Dutch registration, 4 units available = Further Information = Axle Configuration Axle Brand: BPW DISC Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 445/45R19.5; Max. axle load: 9,000 kg; Steered; Tire tread left: 55%; Tire tread right: 55% Rear axle: Tire size: 445/45-R19.5; Max. axle load: 9,000 kg; Tire tread left: 55%; Tire tread right: 50% Weights Unladen weight: 2,820 kg Payload: 15,180 kg Gross vehicle weight: 18,000 kg Functional Body make: KRONE AZ Condition Technical condition: Very good Optical condition: Very good Ncedsy Aw Rljpfx Abzow Identification Registration number: 40-WT-PR Further Information Contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 03/2019, total length: 9,220 mm, total width: 2,480 mm, total height: 1,080 mm, suspension: air, tire size: 445/45-R19.5, wheelbase: 5,170 mm, Year of construction: 2019, = Additional options and accessories = - 20FT connections = Notes = Attractive 2019 KRONE AZ18 MAXI 2-axle trailer (year of manufacture 2019) with ABS/EBS, BPW axles with disc brakes, 2 lift and lowering valves, height 105 cm, tires 445/45-R19.5 (left profile: 8/9 mm; right profile: 8/8 mm), unladen weight: 2,820 kg, permissible total weight: 18,000 kg, Dutch registration, 4 units available = Further information = Axle configuration Tire size: 445/45-R19.5 Axle brand: BPW DISC Brakes: Disc brakes Suspension: Air suspension Front axle 1: Max. axle load: 9,000 kg; Steered; Tire treads left: 50%; Tire treads right: 55% Front axle 2: Max. axle load: 9,000 kg; Tire treads left: 50%; Tire treads right: 50% Weights Unladen weight: 2,820 kg Payload: 15,180 kg Gross vehicle weight: 18,000 kg Functional Body manufacturer: KRONE AZ Condition Technical condition: very good Visual condition: very good Identification Registration: 33-WT-PR Ncodpey Anxtjfx Abzsw Further information Contact Arne Honingh for more information.

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 8,093 h, load capacity: 3,500 kg, lifting height: 6,500 mm, mast type: triplex, power: 36 kW (48.95 HP), Equipment: cabin, lighting, sideshift, UNiCARRIERS Diesel Forklift - NISSAN YG-1-F-2-A-35-U Njdsy Ir Hrepfx Abzocw Year: 2015 According to hour meter: 8,093 operating hours 3.5 ton lifting capacity 6.5 meter lifting height!! 3 meter overall height 36 kW Nissan engine - Triplex mast with full free lift - Side shifter - Load guard - Cabin with heating - Lighting system - Original paint - Immediately ready for use - Front tires in good condition - Rear tires NEW! - Simple mechanical forklift! Sales price: €10,900 net Affordable delivery available!

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is the 1st Double End Tenenor in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 2+2 Vertical columns to support the working units Min. useful working width (mm) 300 Max. useful working width (mm) 2000 Min. useful working thickness (mm) 6 Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 60 No. 4 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) Ncsdpeyz Siasfx Abzsw NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Vertical Milling Unit (1.5 kW at 1470 rpm)

Condition: new, Year of construction: 2020, functionality: fully functional, power: 2.2 kW (2.99 HP), rotational speed (max.): 2,700 rpm, Demag motor/gearbox KBA 100 A -12/2 Ncsdpfjywkq Uox Abzow ED = 15/40% 0.21 / 2.2 kW 425 / 2700 rpm Gearbox DO8 i = 3.24 Shaft diameter: 50 mm Condition: as good as new Price on request

Condition: used, power capacity 38 Nm volt 0 V ampere 42 A weight of the machine ca. 59 Kg Nodpfoytg Tiex Abzecw

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multistage centrifugal pump with opposing suction and discharge connections (inline design). The pump components in contact with the medium are made of high-quality stainless steel. The cartridge seal promises high reliability and ease of servicing. Power is transmitted via a rigid, split coupling. The pipe connection is made via combined DIN flanges. Njdpfjwbfigex Abzocw The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer Product Group: Vertical Centrifugal Pumps Manufacturer Product Group: Vertical Centrifugal Pumps CRN Centrifugal pump CRN Manufacturer article number: 96122358 Connection inlet side: Flange Connection outlet side: Flange Connection standard inlet side: EN 1092-2 Nominal diameter, connection outlet side: DN 65 Design: Vertical Speed: 2924 min Motor output power: 11.0 kW Protection class: IP55 Max delivery head: 90.2 m Max working pressure: 16 bar Weight: 193.2 kg List price: 14,844.00 € Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items in other sizes - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 1980, sheet width 2050 mm plate thickness 8 mm electrical . weight of the machine ca. 6,3 t +++++ Ncedpfx Aokxhrhjbzjw Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1988, plate width 2000 mm plate depth 3500 mm plate height 270 mm weight 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Njdpjiiii Sjfx Abzjcw +++++

Year of construction: 1996, condition: ready for operation (used), We have a large stock of used axle motors, gearboxes, etc. in our warehouse. Ncjdpfx Abjgtmwtozsw Please inquire about your specific requirements. We offer a range of CNC lathes and milling machines, from older models to virtually new ones. INDRAMAT / SIEMENS / FANUC /

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg Ncjdsyc T Apjpfx Abzew For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.

Condition: new, maximum load weight: 34,104 kg, overall weight: 47,000 kg, axle configuration: 2 axles, Year of construction: 2026, Further information here: Njdpfx Ajv D Abgebzjcw

Condition: new, functionality: fully functional, Grundfos TPE 50-430/2 S-A-F-A-BQQE-LD1 Single Stage Close Coupled In Line Centrifugal Pump. Specifications: Nsdpfxstp A Shj Abzocw DN50 flanges 345mm between flanges Q = 35.1m3/h H = 33.9m n= 2920 /min Good working condition. Please check out our other listings as well.

Condition: excellent (used), Standard steam boiler 2000 kg/h 22 Bar (2166) oil or gas burner Njdpfx Aboxqr E Djzocw

Condition: excellent (used), Year of construction: 2016, Viessmann Vitocrossal 200 Type:CM2 Year: 2016 Output: 311Kw Ncedpfx Abstu Trujzew Мы говорим по русски! Viewing please only by telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: like new (used), Year of construction: 2013, Heating water boiler, low-temperature boiler BABCOCK WANSON Ncodpfeianacex Abzow MODEL: HW3P Output: 1985 kW Year of manufacture: 2013 In very good overall condition; minimal operating hours. - Price is negotiable. - Delivery is possible upon request. - All technical specifications can be seen in the images. Preferential sale to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors.

Condition: repair required (used), Year of construction: 1992, functionality: limited functionality, Machine for producing hollow canolini tubes. The machine is operational. It requires saw blade replacement and a general overhaul. Ncjdpfxswxl Hyo Abzew

Condition: new, Year of construction: 2019, Emerson Micro Motion F100S Coriolis Mass Flow Meter | 4200 Transmitter | New in Box | 2019 We offer this Emerson Micro Motion Coriolis Mass Flow Meter in excellent, unused condition. The unit comes complete with the original Emerson 4200 transmitter, calibration certificate, documentation, software CD, and original packaging. Condition: Unused surplus stock. Sold exactly as shown in the pictures. Delivery: Ex Works Rotterdam, The Netherlands. Payment: 100% in advance. Ncodszpaagspfx Abzjw Sold as is, where is, without warranty or guarantee.

Condition: ready for operation (used), CANTILEVER RACK DOUBLE-SIDED | HEIGHT 200 CM | 200 KG PER ARM This double-sided cantilever rack is ideal for storing lightweight long goods such as pipes, profiles, battens, laths, rails, and other bulky materials in warehouses, workshops, or craft businesses. With an overall height of approx. 200 cm and cantilever arms of approx. 50 cm, the rack provides clearly arranged and easily accessible storage spaces on both sides. Thanks to 6 storage levels including the base, it offers ample storage capacity while saving valuable floor space. Each cantilever arm is loadable up to 200 kg. The robust construction ensures reliable performance in daily operations. FREE DELIVERY WITHIN GERMANY IS INCLUDED. PRODUCT DETAILS: - Rack type: double-sided cantilever rack - Total length of rack row: approx. 3.91 m - Total height: approx. 2,000 mm - Usable depth per arm: approx. 500 mm - Usable depth of base level: 525 mm - Total depth: 1,150 mm - Center distance (upright spacing): approx. 1,250 mm - Maximum load per arm: 200 kg (with evenly distributed load) - Maximum load per upright: 1,000 kg (with evenly distributed load) - Storage levels per side: base + 5 - Design: double-sided, arms & anti-roll-off devices welded in place - Colour: RAL 7016 (anthracite grey) - Connectors & bracings: galvanized SCOPE OF DELIVERY: - 04 x uprights incl. base section made of IPE100, height approx. 2,000 mm - 40 x cantilever arms, approx. 50 cm long, RR 50x30x2 mm - Incl. all braces and required bolts - Incl. heavy-duty anchors Price: 1229.00 € net incl. delivery 1462.51 € gross incl. delivery Njdpfx Aezn Hbuobzocw You will receive an invoice with VAT shown separately. Delivery included: Nationwide free delivery within Germany, excluding islands. Fast processing and prompt shipping upon receipt of order. INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. We are available by phone from Monday to Friday, 08:00 a.m. – 4:00 p.m. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, axle configuration: 3 axles, first registration: 03/2000, loading space length: 13,460 mm, loading space width: 2,460 mm, loading space height: 2,670 mm, suspension: air, color: white, Year of construction: 2000, Axle configuration Suspension: Air suspension Middle axle 1: Tire tread depth left: 80%; Tire tread depth right: 80% Middle axle 2: Tire tread depth left: 30%; Tire tread depth right: 30% Middle axle 3: Tire tread depth left: 30%; Tire tread depth right: 30% Ncedeznlwzopfx Abzsw Weights Unladen weight: 11,580 kg Payload: 27,420 kg GVW: 39,000 kg Functional Body brand: THERMOKING SL200 Cooling engine: Diesel and electric Wall thickness: 4 mm Condition Technical condition: good Optical condition: good

Condition: excellent (used), lifting height: 2,750 mm, Year of construction: 2017, Empty weight: 480 kg Lifting capacity: 208 kg Dimensions of cargo space: 137 x 74 x 128 cm CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: DK Please contact Vink Machinery for more information Smartlift Compact SL 208 Vacuum Lifter * 2017 * Battery powered * 2.75 meter working height * 0.85 meter horizontal reach * 208 kg lifting capacity * 480 kg own weight Ncodsznwqtopfx Abzsw

Condition: used, mileage: 80,000 km, power: 110 kW (149.56 HP), first registration: 04/2022, fuel type: diesel, overall weight: 3,010 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2022, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Additional features: Nodpfx Aozn D Rmobzecw Automatic climate control, 3rd brake light (LED), 4 speakers, Passenger airbag can be deactivated, Airbag driver/passenger side, Trailer Stability Assist (TSA), Electronic brake-force distribution, Rear center armrest, Ashtray in front, Audio system: Radio with CD and MP3 player, Exterior mirrors electrically adjustable, Exterior mirrors black, Glasses compartment, Roof antenna, Tachometer, Electronic stability and traction control (MASC + MATC), Driver Information System (FIS) with color display, Power windows front + rear, Remote unlocking of fuel tank flap, Cup holders in front, Cup holders front and rear, Seatbelt pretensioners front, Glove compartment lockable and illuminated, Heated rear window, Interior/exterior temperature display, Interior mirror with automatic anti-glare function, Isofix mounts for child seat, Body/structure: Pick-up, Double cab, Child safety lock, Knee airbag, Head airbag system rear, Head airbag system front, Radiator grille matte black, Steering wheel with multi-function buttons, Steering column (steering wheel) height adjustable, Reading light, Alloy wheels, Air vents in the rear, Center console with storage compartment, Model upgrade, Engine 2.2 L - 110 kW DI-D CAT, Wheelbase 3000 mm, Low emissions according to Euro 6d-TEMP emission standard, Windshield wipers with intermittent operation, adjustable, Headlights clear glass, Mud flaps rear, Mud flaps front, Side airbags front, Side impact protection, Safety belts height adjustable, Front left seat height adjustable, Start/Stop system (ASG), Socket (12V connection) in center armrest/center console, Bumpers in vehicle color, Carpeting in passenger compartment, Side steps, Exterior door handles black, Underride guard front, USB/audio interface, Tie-down eyes in luggage compartment/cargo area, Heat-insulating glazing.

Condition: good (used), fuel type: diesel, Year of construction: 2016, operating hours: 996 h, Giant D 254SW – Mini Shovel – Wheel Loader – 2016 – Bucket – Pallet Forks – 996 hours – Kubota 3-cylinder engine A video can be sent via WhatsApp. Nsdpfjzmxk Ejx Abzocw We have a continuous stock; please see our website. Prices are quoted ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland