Used Wila Spare Parts for sale (17,486)

Year of construction: 2002, condition: ready for operation (used), Basket diameter: 790mm, usable height: 500mm, loading height: 930mm, max. basket load: 300kg, liquid volume: 150l, pump capacity: 1.5kW, heating capacity: 6kW, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1200mm, weight: approx. 220kg. Documentation available. On-site inspection is possible. Hnodpfxswg E Aqs Aaior

Year of construction: 2011, condition: ready for operation (used), An industrial multi-bath continuous spray cleaning system Pero for components is available. Belt width: 500mm, clearance height: 300mm, max. belt load: 40kg/m, loading height: 900mm, belt speed: 2.8m/min, cleaning volume flow: 320l/min, cleaning pressure: 2bar, machine dimensions X/Y/Z: approx. 5100mm/2100mm/2300mm. Documentation available. An on-site inspection is possible. Hnsdpfoy Ax T Iox Aaisr

Condition: ready for operation (used), A DMG Automation robot automation cell is available. Interior dimensions X/Y: approx. 700mm/1050mm, max. workpiece weight: 10kg, max. workpiece dimensions X/Y: 150mm/120mm, positioning accuracy: +/-0.1mm, robot axes: 6, robot controller: Kuka KR C 2. Documentation available. On-site inspection is possible. Hsdpfx Aaewixzxjisnr

Year of construction: 2006, condition: ready for operation (used), Three automatic small parts storage systems (AKL) Siemens Dematic SR-M100 are available. Storage locations: 19450, payload: 2x50kg per compartment, max. loading unit dimensions X/Y/Z: 600mm/400mm/320mm, travel speed: 200m/min, lifting speed: 120m/min, retrieval speed: 100m/min. On-site inspection is possible. Available from approx. Q4 2024. Hodpfx Aaotvgqneionr

Year of construction: 2004, condition: ready for operation (used), Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible. Hnjdpfoxwcvgsx Aaijr

Year of construction: 2005, condition: ready for operation (used), Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible. Hnjdpjwr Dxhefx Aaier

Condition: excellent (used), functionality: fully functional, An old gem – anyone familiar with this device swears by it. Includes 2 devices and a box of spare parts, including circuit boards, etc. Hnjdpfxexk Ty Ne Aaisr Total price for the entire package of 2 devices, including the spare parts kit: €2,600. Delivery is included! Price for one device: €1,400.

Condition: excellent (used), Product description: Model: RKR!200/2 Cleaning basin on a stable base with cross braces. The perforated sheet made of galvanized steel is set into a basin with a conical outlet. The rear and side walls are hot-dip galvanized and equipped with edge protection. • Self-priming pneumatic drum pump • Dimensions: 120 x 80 x 133 cm (L x W x H) • Load capacity: approx. 30 kg • Working height: approx. 1040 mm Model: RKR!200/2!D Hsdpfx Aezua Easaijnr

Condition: used, Colour: Grey Dimensions (LxBxH): 170 x 65 x 160 cm - Details: - └ Description: Roller width 1050mm - Documentation available: No - CE certificate present: No - Voltage [V]: 220 - Current consumption [A]: 1.5 - Transport dimensions: 1700mm x 650mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT Hjdeyymxyspfx Aaisnr VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 750,130 km, power: 315 kW (428.28 HP), first registration: 12/2018, fuel type: diesel, tire size: 295 / 80 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, total height: 3,950 mm, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, power mirror, second fuel tank, soot filter, spoiler, General information Cab: Super Space Cab Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Tyre size: 295 / 80 / R22.5 Make axles: DAF Brakes: disc brakes Front axle: Max. axle load: 7100 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.999 kg Carrying capacity: 11.001 kg GVW: 19.000 kg Interior Interior: grey Number of seats: 2 Environment Emission class: Euro 6c Condition General condition: average Technical condition: average Visual appearance: average Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Air horn - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio/CD player - Remote central locking - Speed limiter Hedszrni Ispfx Aaionr - Spotlights - Stability control - Toolbox - Visor - Webasto

Condition: used, Colour: Red Empty weight: 500 kg Dimensions (LxBxH): 120 x 90 x 140 cm Hsdpezrnwfofx Aaionr - Details: - └ Description: various planer blades - Documentation available: No - CE certificate present: No - Transport dimensions: 1200mm x 900mm x 1400mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Colour: Red Empty weight: 750 kg Dimensions (LxBxH): 120 x 80 x 7 cm - Documentation available: No - CE certificate present: No - Transport dimensions: 1200mm x 800mm x 75mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Hedpfxozrnv Uo Aaienr Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2001, Loader with 3 units for: 1) left -> end cut with 1 saw blade 2) right –> milling or drilling 3) left and right –> sanding piece heads with continuous abrasive belt and profiled pads Sanding machine with - No. 2 upper horizontal sanding belts - No. 2 lower horizontal sanding belts - No. 2 right vertical sanding belts - No. 2 left vertical sanding belts - No. 2 orbital sanders - No. 2 Camam robots mod. NTTR for handling pieces Hnodjvxqh Dopfx Aaior - No. 2 Camam brushing heads mod. SAW 91 - Return connection belts to the operator - With cabin - CE norms Technical characteristics: • maximum length of pieces to be sanded 1,200 mm • Minimum length 380 mm (350 mm without orbital sanding) • Abrasive belt dimensions: 3,700 x 90 mm • Maximum curvature of pieces 120 mm

Condition: used, The painting line consists of the following elements: 1) MTL.120 monorail, 600 kg load capacity, equipped with hooks and rotation drive 2) Dry spray booth for painting 3) Dust extraction booth Hnedpfjyy Rivsx Aaior 4) Ducted solvent extraction system 5) Ducted paint oven system 6) Reciprocator for electrostatic spray guns 7) Wagner 30:1 high-pressure pump for solvent-based electrostatic installation 8) Protective enclosure for low-pressure ASAI system 9) Flow coating system 10) Low-pressure pump for ASAI electrostatic installation

Year of construction: 2008, condition: ready for operation (used), Bio-Circle Compact parts cleaner / parts washing station - Year of manufacture: 2008 - Working area width: approx. 700 mm - Working depth / working area depth: approx. 450-480 mm - Working height: approx. 800 mm - Load capacity / load capacity up to approx. 100 kg - Empty weight: approx. 45-55 kg Hnodjztd Ngopfx Aaijr - Heating power: approx. 650-700 W - Temperature (preset): approx. 41 °C - Electrical connection: 230 V, 50 Hz - Filling volume (optimal / maximum): approx. 100 L - Tank / basin material: LDPE plastic (low-density polyethylene) Dimensions: L x W x H 0.6 x 0.9 x 1.1 meters / Weight 45 kg

Condition: used, Sporer PCS Aqua Jumbo Iso parts washer or automatic parts cleaning machine for the automatic cleaning and degreasing of workpieces using a heated, aqueous cleaning medium via a spray process. The machine operates as a top-loading unit with a rotating wash basket and is suitable for large and heavy components in workshops, maintenance departments and industry. The Iso version features thermal insulation to reduce energy loss. The pumps are leaking and need to be overhauled or replaced. Hnjdpfozry Dwjx Aaior Technical data: - Basket diameter: 1,100 mm - Usable height: 500 mm - Load capacity: max. 350 kg - Tank capacity: 250 l - Power: 15.4 kW - Operating temperature: max. 75 °C

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. Hnedpjztwkdjfx Aaior The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Key Advantages of the MP160 Parts Washer 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Maximum detergent temperature 70°C Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Condition: used, Year of construction: 1996, operating hours: 14,240 h, 1996 | Sennebogen 625 M for parts only | Used Mobile Crane | 14240 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: As a source for spare parts: Many components have already been removed. The engine and hydraulic pump are present, and the axles are complete. However, some hydraulic parts as well as the joysticks and displays are missing. The engine is also reported to have defects. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40537 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Hsdpfjzrlyqex Aaionr 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: limited functionality, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Hedpexc E Trjfx Aaijnr Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package.

Condition: ready for operation (used), IBS Maxi 91-2 washing machine, parts washing machine Washing tank: 190 liters Basket load: 200 kg Heating power: 6 kW Total power: 8 kW Hjdpfszq Addex Aaijnr Serial number: 09.102.226L Usable height: 500 mm Basket diameter: 910 mm Heating temperature: 0-60°C You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Cabinet Parts Washer The MP160 Cabinet Parts Washer is a modern cleaning system designed for intensive cleaning of industrial and automotive components in a closed-loop system, using high temperature and pressure. With an operating pressure of 5–8 bar and the ability to heat the cleaning solution up to 70°C, the machine effectively removes carbon deposits, oil, grease, and other stubborn contaminants, even from hard-to-reach areas and components with complex geometries. Key Features of the MP160 Operating pressure: 5–8 bar – ensures effective removal of stubborn contaminants from parts with complex shapes and intricate geometries. Heated cleaning solution up to 70°C – improves detergent performance and reduces cleaning time. Dual-function spray gun – allows operation with compressed air only or with a mixture of air and cleaning fluid, while also enabling efficient drying of cleaned components. User-friendly control panel – provides convenient operation with independent control of the power supply and heating system. Hjdpfjuc Tn Aex Aaisnr Pressure gauge – allows continuous monitoring of operating pressure. Compact steel construction – designed for regular use in workshops, service centers, and industrial facilities. Machine Construction The MP160 is built for intensive operation in workshop and industrial environments. Its compact dimensions of 770 × 600 × 1330 mm allow convenient placement next to the workstation while providing ample space for cleaning small and medium-sized components. The 8–14 L cleaning solution tank enables economical use of detergent. Adjustable leveling feet ensure stable positioning, while the integrated pressure gauge provides constant monitoring of operating pressure. Precision and Performance The MP160 is designed for thorough cleaning of components with complex structures, including turbochargers, valves, covers, housings, and hydraulic components. Its pressurized spray system directs the cleaning solution into narrow gaps, channels, recesses, and other difficult-to-access areas. After the cleaning cycle, components can be blown dry with compressed air, helping remove residual cleaning fluid and preparing parts for assembly, inspection, remanufacturing, or other service operations. Applications The MP160 Cabinet Parts Washer is ideal for: Mechanical workshops Component remanufacturing facilities Service and repair centers Tool rooms Maintenance departments Manufacturing plants It can be used for cleaning: Turbochargers Valves and valve bodies Covers and housings Engine and transmission components Hydraulic system components Industrial machine parts Workshop tools and equipment Components made of steel, cast iron, and other materials compatible with the selected cleaning agent Standard Equipment Dual-function spray gun for cleaning fluid application and compressed air blow-off Heated cleaning solution system Control panel Operating pressure gauge Adjustable leveling feet Technical Specifications Cabinet Capacity 160 L Maximum Detergent Temperature 70°C Cleaning Solution Tank Capacity 8–14 L Operating Pressure 5–8 bar Dimensions (W × D × H) 770 × 600 × 1330 mm Weight 47 kg

Condition: ready for operation (used), Description: Hjdpozpzhrsfx Aaijnr Geiger MiniServo II 1.5, a servo-motorized removal device or sprue picker, specifically designed for use with injection molding machines. The device is used to precisely and quickly remove sprues or small finished parts from the mold and place them in a designated area. Swivel axis (A): 0-105° Removal stroke (X): 300 mm with linear guide and rack and pinion Vertical/lateral stroke (Y/Z): 800 mm linear guide and rack and pinion (part and gripper weight up to max. 1.5 kg) Servo-motorized drive for the main axes Fail-safe mechanism (Y): electromechanical Sliding console Gripper F Rotary module B (pneumatic) with stop 1 compressed air circuit for the gripper 1 compressed air circuit for the rotary module B 1 vacuum circuit with monitoring Gebtkoy Tn Rdsqqtioiu Programming assistant for programming standard removal sequences with 1 pressure and 1 vacuum circuit Interface connection Euromap 67 (standard) Interface and power cable, 5 m Placement area behind and in front of the machine RAL 9016 white Additional control unit HT7, vacuum circuit, and consoles Input voltage: 230 V Since I was unable to observe the device in operation, I cannot provide any guarantee. According to maintenance records, it is in good condition, but it has experienced occasional malfunctions (1 to 2 times per week). Turning the main switch off and on again would resolve the issue. Therefore, it is not suitable for continuous operation. I am selling it as a spare parts unit for this reason.

Condition: new, We have different electronic parts for DMG machines, BOSCH,Siemens .... Hjdjddxv Uspfx Aaijnr On Your request I will send detailed photos of all parts.

Condition: used, Colour: Grey Empty weight: 1.000 kg - Details: - └ Description: blades for a planer - Documentation available: No Hnedpfozmupdjx Aaier - CE certificate present: No - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 300,000 km, first registration: 01/2002, fuel type: diesel, fuel: diesel, color: other, gearing type: automatic, Year of construction: 2002, Damage: Vehicle damaged (not drivable). Hnjdpfezmdwkex Aaior