Used Winter Cnc-Processing Center for sale (40,460)

Condition: used, Year of construction: 2002, functionality: fully functional, CNC turning machine Gildemeister Type: CTX 420 V6 Linear Year of construction: 2002 Technical data: Working area: Max. swing diameter over X-axis 680 mm Swing diameter over X-axis 565 mm Chuck diameter 200/250 mm Z-axis travel 260 mm X-axis travel 635 mm Spindle head: Spindle head (flat flange) 170 main spindle, 140 counter spindle Spindle diameter at front bearing 120/90 mm Spindle bore 79/57 mm Djdpfxjz I T Avs Akmoku Main drive: Power of the AC main drive (100% duty cycle) 25 kW Torque max. 270 Speed range 25-5000 rpm Counter spindle Drive power AC 25 kW Torque max. 7000 Nm Speed range 35-7000 rpm Tool turret Number of tool stations 12 Tool holder according to DIN 69880 Cylindrical shank diameter 40 mm Indexing time 30°, 0.15 sec. Number of driven tools 5 Drive power 13.2 kW Torque 28 Nm Speed max. 4500 rpm C-axis, main spindle/counter spindle Speed range 0-250 rpm Torque 200/120 Nm Speed for point positioning 0.025 degrees Y-axis, vertical travel +/- 40 mm Hydraulics Capacity, total approx. 25 l Pressure max. 80 bar Pressure for clamping device max. 70 bar

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Dkedpsz Aplxsfx Akmju Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: excellent (used), functionality: fully functional, fixed tool holders Machine: MORI SEIKI SL2000 Manufacturer’s tool turret: SAUTER ---- 2x → No. 444-119 Turning tool holder 25 mm steel holder Fixed turning tool holder Price: 150.00 €/piece ----- 1x → No. 444-201 Double turning tool holder for main spindle and counter spindle with 1x clamping strip for 25 mm tool steel Fixed turning tool holder Price: 250.00 €/piece ----- 1x → No. 444-210 Drill bar holder Cylindrical mount, ø 32 mm Second mount, ø 32 mm; 57 mm towards the rear Price: 220.00 €/piece Dksdpfx Akjynb E Nemou ----- 1 x → No. 444-205 Turning tool holder mount 25 mm steel holder Price: 150.00 €/piece Package price: 750.00 €/net, including shipping within Germany International shipping upon request.

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Dkjdpfx Akox Twdyjmju

Condition: good (used), Year of construction: 1998, Ref. -No.: 10661 Manufacturer: MAZAK Type: SQT 200 MS Year of construction: 1998 Djdpfx Aezw Txljkmeku Type of control: CNC Control: Mazatrol Fusion 640T Storage location: Halberstadt Country of origin: Japan Turning Speeds: 6000 RPM Swing Dia.: 525 mm Turning Diameter: 300 mm Turning Length: 500 mm Spindle Speeds: 5000 RPM Spindle Bore: 51 mm Spindle power: 18,5 kW Turret places: 1 Pcs Tool places: 12 Machine length: 3023 mm Machine width: 1700 mm Machine Height: 1999 mm Weight Of The Machine Ca.: 5,3 t Pole work up to max.: 51 mm Further information: - The Mazak SQT 200 MS is built for durability and reliability - Its design ensures stability and precision during machining, even at high speeds or during long production runs. - This model features powered tools and C-axis capabilities - This model is typically equipped with the Mazatrol Fusion 640T CNC control. The machine can be viewed while powered on by appointment.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm Dodpfsy Ed Ehsx Akmeku A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Djdpfou U R E Aox Akmeku

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning length: 511 mm, turning diameter: 380 mm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, MAZAK QUICK TURN NEXUS 200 MS Year of manufacture: 2004 Control system: Mazatrol 640T Nexus Machine type: CNC turning machine Configuration: Main and counter spindle, C-axis, driven tools Working area: Max. swing diameter: 675 mm Max. turning diameter: 380 mm Max. turning length: 511 mm Max. bar diameter: 65 mm Main spindle: Speed range: 35 – 5,000 rpm Drive power: 26 kW Continuous power: 22 kW Max. torque: 350 Nm Spindle bore: 76 mm Spindle nose: A2-6 C-axis resolution: 0.001° Counter spindle: Speed range: 35 – 6,000 rpm Drive power: 10 kW Continuous power: 7.5 kW Max. torque: 75 Nm C-axis resolution: 0.001° Tool turret: Tool positions: 12 Driven tools: available Speed of driven tools: 25 – 4,500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel distances: Dkodpfez Ipvxex Akmsu X-axis: 230 mm Z-axis: 575 mm Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 33 m/min Machine data: Total connected load: approx. 46.2 kVA Machine weight: approx. 5,100 kg Dimensions L x W x H: approx. 2,800 x 1,800 x 1,850 mm

Condition: good (used), Year of construction: 2005, Ref. -No.: 10627 Manufacturer: AUERBACH Type: IA 5B 3200 RT Year of construction: 2005 Type of control: CNC Dodpfx Aoy Ed R Dskmeku Control: Heidenhain 530 Storage location: Halbrstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 2000 mm Z-Travel: 1600 mm B-Axis: 360 ° C-Axis: 360 ° Spindle Taper: SK 50 Rotary Table (Lxw): 2500 x 2000 mm Table Load: 20.000 kg Tool Piece Magazine With: 100 Pcs./pcs. Operating hours: 75.377 H Spindle hours: 28.246 H Machine length: 7300 mm Machine width: 7700 mm Machine Height: 4350 mm Weight Of The Machine Ca.: 28 t Further information: - with H / V head Machine can be viewed under power by arrangement

Condition: used, Rated voltage: 400V, phases: 3, frequency: 50Hz, max. power consumption: 57.9kVA, total current consumption: approx. 83.8A, max. motor current consumption: 94A, current interruption at: 10kA, connected load: 47.8kVA, control: Okuma OSP-U100L, an on-site inspection is possible. Dsdpfx Aksz E Nq Rsmjku

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 600 mm, turning diameter: 324 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 635 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, GILDEMEISTER CTX 420 linear V3 Year of manufacture: 2003 Control system: Heidenhain Plus IT / DataPilot Machine type: CNC turning machine Design: C-axis and driven tools Working area: Swinging diameter over bed: 680 mm Swinging diameter over cross slide: 565 mm Max. turning diameter: 324 mm Max. turning length: approx. 600–635 mm Travel in X-axis: 260 mm Travel in Z-axis: 635 mm Main spindle: Speed range: 20–5,000 rpm Drive power: 37 / 25 kW Max. torque: approx. 390 / 270 Nm Bar diameter: approx. 65 mm Spindle bore: approx. 79 mm Tool turret: 12-position Sauter tool turret Tool holder: VDI 30 Driven tool stations: up to 12 Speed of driven tools: up to approx. 4,500 rpm Power of tool drive: approx. 12.2 kW C-axis: C-axis available Rapid traverse rates: Rapid traverse rate X-axis: up to 60 m/min Rapid traverse rate Z-axis: up to 45 m/min Tailstock: Tailstock available Arbor mounting: MK 5 Tailstock travel: approx. 580 mm Machine data: Machine weight: approx. 6,000–6,500 kg Dimensions L x W x H: approx. 3,500 x 2,460 x 2,100 mm Typical equipment: Driven tools C-axis Djdpsz Iqc Hefx Akmjku 12-position turret Tailstock Chip conveyor Coolant system

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition Dkjdpfx Asx Hn D Rskmju - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Djdevvi Nbopfx Akmoku Storage location: Nattheim

Condition: good (used), Year of construction: 2008, functionality: fully functional, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit. Dodpsz Hfbbsfx Akmeku

Condition: excellent (used), Year of construction: 2021, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Dsdpfxjz Ha H Se Akmsku Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Max. turning diameter. 400 mm Turning length. 650 mm Circumferential diameter. 600 mm X-axis travel. 275 mm Z-axis travel. 700 mm Bar capacity. 85 mm Main spindle. 3,400 rpm for 85 mm bore Spindle nose. A8 / DIN A8 Chuck Driven tools. MC = Milling/driven tools Control system. Siemens 16-station BMT45 turret, axial - all stations driven Chip conveyor in the tailstock High-pressure pump, 15 bar Siemens Sinumerik One Dsdsz Hyy Eopfx Akmsku Measuring probe for tool measurement in the work area Direct measuring system in the X-axis Automatic door

Year of construction: 2007, operating hours: 11,749 h, condition: used, Empty weight: 9.100 kg Serial number: 17006585 Hours: 11749 X-axis travel: 800 mm Y-axis travel: 500 mm Dsdpfx Aez Ep Euekmoku Z-axis travel: 610 mm Table size: 1,600 × 550 mm Max. table load: approx. 600 kg Distance table–spindle nose: 160–770 mm Rapid traverse: up to 30,000 mm/min Spindle holder: HSK-A63 Spindle speed: 14,000 rpm Spindle cooling: Active Tool magazine: 46 positions Automatic tool changer: Yes Control: Heidenhain Machine weight: approx. 9100 kg Overall dimensions L×W×H: approx. 3000 × 2200 × 3100 mm Equipped with: Fehlman ATS 160 CNC, Blum P87.0634 laser system, Donaldson oil/mist filer DMC MMA, Fehlmann KM-Anlage HD coolant pump, burn engineering FD 2500-F11 cooling unit, Knoll 300 K-1 scraper belt conveyer Online auction of mold making, die manufacturing machine tools (e.g. CNC surface grinding, turning and milling machines FEHLMAN, HEDELIUS, ABA, G+H, SUNNEN, BIGLIA, OKUMA etc.) due to the full plant closure of metal working company location Meusburger Germany GmbH at Viernheim (near Mannheim) in Germany. The online auction opens Thursday 24 September and closes Tuesday 13 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 8 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10664 Manufacturer: HEDELIUS Type: BC 100 Performance Year of construction: 1998 Type of control: CNC Control: Heidenhain 426 Storage location: Halberstadt Country of origin: Germany Djdjz D Skdjpfx Akmsku X-Travel: 3500 / 2 x 1450 mm Y-Travel: 1000 mm Z-Travel: 700 mm Tool Taper: SK50 DIN 69871 Numbers Of Tools In Magazin: 30 Turning Speeds: 20 - 5000 RPM Rapid Travel X/Y/Z: 30 mm / min Spindle power: 50 kW Minimum distance between spindle nose and table top: 190 mm Further information: - NC software version: 28047629 - PLC: bc80_426_3:07 - Setup 286197 37 The machine can be viewed while powered on by appointment.

Condition: used, Year of construction: 1999, Storage location: Nattheim Dsdpfx Aovvi Rxokmoku

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, SPINNER TC300-52 SMCY – CNC turning center, manufactured in 2012 including bar feeder Spinner Servo-Load 80-1500 and tool package Availability: expected November/December 2026, as soon as the replacement machine is delivered. The machine is currently in continuous production and operating at full capacity – inspections while powered and in operation are possible at any time by appointment. It has been running continuously in a single-shift operation. Operating hours: 25,000 hours General - Manufacturer: SPINNER Werkzeugmaschinenfabrik GmbH, Sauerlach - Type: TC30052SMCY | Machine no. AZ0145 | Manufactured in 2012 - Control: Siemens Sinumerik 840D sl, ShopTurn - Connection: 3/PE ~ 400 V, 50/60 Hz, I_B 34 A, I_N 35 A - Weight approx. 3,700 kg | Dimensions approx. 2.0 × 1.6 × 2.0 m Working area - Max. swing diameter approx. 300 mm - Max. turning diameter approx. 250 mm - Max. turning length approx. 400 mm - Travels X 180 / Y Z approx. 500 mm - Rapid traverse X/Z 15 / 24 m/min Turret 1 - Max. 5,000 min⁻¹ | 15 kW (S1) | 95 Nm (S1) - Bar capacity 52 mm | C-axis Turret 2 (counter-spindle) - Max. 7,000 min⁻¹ | 6 kW | 38 Nm | C-axis Tool turret Dkedpfjzx Subex Akmju - 12 tools, VDI 25 - 12 rotating tool stations, max. 6,000 min⁻¹ - Power 5.9 / 2.2 kW (S6 40 % / S1) - Torque 14.75 / 9.5 Nm (S6 40 % / S1) Operating materials - Coolant tank approx. 150 l | Hydraulic tank approx. 11 l | Central lubrication approx. 2–3 l Bar feeder SPINNER Servo-Load 80-1500 - Original Spinner, factory-matched to the machine - Bar length up to 1,500 mm, diameter up to 52 mm - Servo-electric, separate control panel, including guide tubes Scope of supply - Counter-spindle, C-axis, Y-axis, driven tools - Bar feeder Servo-Load 80-1500 - Chip conveyor, chip tray, coolant system - Tool cabinet with driven and static tool holders, drilling bar holders, collets - Complete documentation Pictures and a video of the tools, documentation, and scope of supply will follow in the next few days. Terms and conditions Sale of a used machine from ongoing production, as is, with no warranty of any kind. Price net ex works plus VAT. Dismantling and transport can be arranged upon request. Technical data according to the manufacturer's original documentation. Equipment and condition without guarantee, to be checked on the machine before purchase. If you have any questions or would like to arrange an inspection, please do not hesitate to contact me at any time.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC-Steuerung Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm Dkedpfx Aezkpupskmeu 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: used, Year of construction: 2008, Technical details: turning diameter: 410 mm turning length: 500 mm control: Fanuc 21i TB standard turning diameter: 275 mm travel -x axis: 277 mm travel -y axis: 82 (±41) mm travel -z axis: 500 mm Spindle 1 RPM: 4500 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 65 mm turret stations / rotary tool stations: 12/12 Dkedpfx Aszd Un Iokmeu Power rotary tools: 5,5 kW RPM of rotary tools: 6000 1/min total power requirement: 39,2 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,1 x 2,0 x 2,2 m collet chuck: Hainbuch Accerories Chip conveyor Robot interface High precision Turning and Milling Centre with Y-axis and robot loading. Stäubli Robot for shaft loading can be supplied. Machine was running with oil, not coolant. A fire extinguisher system is installed *

Condition: good (used), Year of construction: 2010, 5-axis CNC machining center - universal - Manufacturer: CHIRON Machine Model: Mill 2000 Control: Siemens 840D Year of manufacture: 2010 TECHNICAL DATA Travel ranges - X-axis: (mm) 2,000 - Y-axis: (mm) 500 - Z-axis: (mm) 550 Rapid traverse rate: X/Y/Z (mm/min) 60,000 Spindle - Internal coolant supply (ICS): (bar) - Spindle speed max.: (rpm) 12,000 Tool magazine - Tool holder: SK40 - Tool places: 40 Machine table - Size of fixed table L x W: (mm) 2,000 x 550 Number of rotary tables: 2 - Manufacturer: Peiseler - Model: ZAS 160 Number of steady rests: 2 - Manufacturer: Peiseler - Model: GP MK 3 Dkjdpfx Akjz E Nvgemou - Actuation: hydraulic EQUIPMENT FEATURES + Siemens 840D control + Partition for alternating machining + Rotary tables, 2, 1 on the right, 1 on the left. Manufacturer: Peiseler, Model ZAS 160 + Steady rests, 2, 1 on the right, 1 on the left. Manufacturer: Peiseler, Model GP MK3 + ICS pump 40.6 bar + Chip conveyor, screw conveyor + Paper band filter + Air blow gun, 2, 1 on the right, 1 on the left + Chip flushing gun, 2, 1 on the right, 1 on the left + Electronic mini handwheel with emergency stop + Air-conditioned control cabinet + Fire extinguishing system + Hydraulic system + Signal light, 3-color Subject to changes and errors in the technical data and information.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10662 Manufacturer: STARRAG HECKERT Type: HEC 1250 Athletic Year of construction: 2009 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 221XXX X-Travel: 2200 mm Y-Travel: 1600 mm Z-Travel: 1850 mm Spindle Diameter: 100 mm Max. Tool Weight: 35 kg Max. Tool Length: 800 mm Max. Tool Diameter: 250 mm Clamping Area: 1000 x 1250 mm Tool Piece Magazine With: 60 Pcs./pcs. Max. Torque: 25.000 Nm Turning Speed Range - Stepless: 40000 mm / min Rapid Traverse: 40 m / min Numbers Of Pallets: 2 pallet change time: 47 s Weight Of The Machine Ca.: 26,5 t Position uncertainty P: 0,008 mm Position deviation Pa: 0,006 mm Positional dispersion Ps: 0,005 mm Maximum table rotation: 10 RPM Further information: - Design: Thermally symmetrical column design with optimal chip flow for machining castings. - Applications: Mechanical engineering, energy technology, and the machining of large gearboxes and engine components. - Powerful motor spindle (up to approx. 82 kW, depending on the model) for heavy-duty machining. - The Heckert HEC 1250 Athletic (built in 2009) is a high-performance, modular 4-axis large-scale machine for the precise complete machining of heavy workpieces. Dksdez Adt Ropfx Akmou The machine can be viewed while powered on by prior arrangement.

Condition: excellent (used), Year of construction: 2024, MAZAK INTEGREX i-100H Max. machining diameter: 600 mm Dksdpfxey Hwn Ee Akmju Max. machining length: 590 mm Max. milling speed: 12,000 rpm Max. spindle speed: 6,000 rpm Machine is equipped with: - CNC control Mazatrol SmoothAi - Tool magazine for 74 tools - KITAGAWA 3-jaw chuck B-206, diameter 169 mm - Tool Eye - C-axis input accuracy 0.0001° - Y-axis - B-axis 0.0001° - 5-axis machining package for SmoothAi - Reinforced coolant pump 15 bar - Chip conveyor, side discharge