Used Yanigav Wood Splitter for sale (6,578)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,250 kg, fuel type: electric, For sale is a ROBUST REUSER SD 600 industrial shredder in like-new condition. The machine comes from an exhibition and has not been used in production. It has no operating hours and is therefore offered as a new machine from an exhibition. The SD 600 is a compact and powerful shredder for various materials, such as wood, plastic, cardboard, paper, and electrical cables. Thanks to the PLC control, automatic operation, and robust cutting unit, the machine is ideal for craft, recycling, and industrial businesses. Technical data: Model: ROBUST REUSER SD 600 Condition: New machine / Exhibition machine Operating hours: 0 Motor power: 15 kW Operating voltage: 400 V Frequency: 50 Hz Fuse rating: 40 A gG / 50 A D Weight: approx. 1,250 kg Dimensions L × W × H: 1.88 × 1.12 × 1.67 m Rotor diameter: 222 mm Rotor length: 550 mm Rotor speed: 80–120 rpm Number of cutting blades: 14 Size of the feed opening: 946 × 567 mm Granulate size: approx. 10–30 mm Capacity: up to 2.5 m³ per hour HOLE SIEVE HARDOX 450 (30mm) The actual throughput and granulate size depend on the material used and the size of the sieve openings. Features and advantages PLC control included Suction connection Ø 160 mm included Fully automatic operation Hardened blades with four usable cutting edges Robust sieve made of HARDOX Ppodpfx Afezl A I Ee Rew Protected hydraulic system Star-delta motor control Quiet and energy-efficient operation Compact and robust design Easy installation Low maintenance requirements We offer the following warranty on the machine: 12 months or up to 1,000 operating hours, whichever comes first. The machine is available immediately. Inspection and further information are available by prior arrangement. The stated selling price is a net price. The statutory value-added tax will be added and shown separately on the invoice. Sale subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,200 h, functionality: fully functional, machine/vehicle number: 09-0302, For Sale: Massey Ferguson 7726 S + MUS-MAX WT9XLZ Wood Chipper Package price: EUR 115,000 (excl. VAT) 🚜 Massey Ferguson 7726 • Year of manufacture: 2018 • Engine hours: 9170 (A complete engine overhaul was carried out approximately 3,000 operating hours ago.) • Price: EUR 70,000 (excl. VAT) • Power: 255 hp nominal / 280 hp max • Front linkage • Front axle suspension • Pneumatic suspension operator seat (360°) • Regular maintenance • Engine oil changed every 250 hours • Transmission: Dyna-6, 50 km/h • LS pump capacity: 200 l/min • 4 double-acting hydraulic outlets with mechanical control • Rear fender lift controls • Electronic linkage control (ELC) with 9,950 kg lifting capacity • PTO: 540 / 1000 rpm • Air brake system for trailer • MF tires: 55% tread remaining. MUS-MAX WT9XLZ • Year of manufacture: 2009 Pedpfx Afjy Sgmbe Rspw • Worn parts replaced regularly • New tires • Tower-mounted camera • Additional LED lighting • MUS-MAX tires: 95% tread remaining. • Fully operational – still in active use

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical data: - Working range X: 3,740 mm - Working range Y: 1,570 mm - Working range Z: 350 mm - 4th axis: present - 5th axis: 5-axis spindle, motor 12 kW - with additional locking of the C axis - Tool changer positions: 24 with disc changer; 10 in the machine column on the left - Vertical drilling spindles: 12 - Machine table: console table - Automatic table positioning: present - 6 workpiece supports type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining fields for pendulum operation Pjdszlbp Uopfx Af Rjpw - with automatic central lubrication - with mobile control desk with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control unit - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected Ppodpfx Aszlbpbsf Rsw safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: like new (used), Manufacturer / Model: JENSEN A530 L Country of manufacture: Germany (Handmade in Germany) Year of manufacture: 2021 Mileage: 27.7 operating hours (factory condition!) Engine: KUBOTA diesel engine Type of chipper: Disc chipper (blades in perfect condition) Maximum material diameter: approx. 130 - 150 mm (depending on the wood's hardness) Infeed system: 2 horizontal hydraulic rollers (smooth speed adjustment) Ppjdpfx Afozlu Rfo Rsw Discharge chute: Rotatable within a range of 270° with an adjustable deflector No-Stress system: Yes (automatically controls the operation of the rollers depending on the engine speed)

Condition: excellent (used), For sale is an industrial autoclave (pressure impregnation unit) manufactured by the renowned Czech company VYVOS spol. s r.o. This unit, with a substantial capacity of 75 m³, is designed for professional wood impregnation using the pressure-vacuum method. The machine was previously used with popular impregnation agents (the unit displays a Tanalith E marking), making it an ideal solution for sawmills, wood processing plants, and manufacturers of garden architecture. Parameters and Technical Specifications: According to the attached original nameplate and documentation, the unit has the following parameters: Manufacturer: VYVOS spol. s r.o. (Czech Republic) Year of manufacture: 2005 Working capacity / Volume: 75 m³ Basic dimensions (chamber): approx. 2.0 m x 13.2 m (the total length of the unit is over 14 m, according to the technical drawings) Maximum working pressure (overpressure): 0.8 MPa (8 bar) Maximum working temperature: 20°C (typical for cold impregnation) Factory number: 2119 Registration number (passport): 1302/2004 Key features and equipment: Robust construction: Thick-walled pressure vessel made of steel, guaranteeing safe operation under load (secured with a locking servomotor-operated hatch). Complete automation system: Control cabinet visible in the photos, with a system of switches, indicators, and an integrated pump power supply system. Included accessories: The machine is sold with the piping system, pneumatic/hydraulic valves (including DN 40, DN 80, DN 200), pressure pump, and auxiliary tank (green) visible in the photos. Documentation: I am including extensive technical documentation with the unit, as shown in the photos, including detailed engineering drawings (sections, locking details), installation diagrams, and valve specifications (including protocols for safety valves set at 0.9 MPa and 1.0 MPa). Technical condition: Podpfx Aozlu N Ujf Rspw The unit is used and shows signs of standard industrial operation. The steel structure is in very good technical condition. The machine requires dismantling, re-commissioning, and calibration at the new destination. I encourage you to contact me to arrange an on-site inspection of the machine. I have complete documentation in paper form available for serious buyers to review.

Condition: good (used), Year of construction: 2000, For Sale: AXYZ 4010 CNC Router (Year 2000) – Made in Canada, Reliable & Versatile We are offering a pre-owned AXYZ 4010 CNC Router, manufactured in Canada, from the year 2000. Known for its durability, precision, and versatility, this CNC router is ideal for various cutting, engraving, and milling applications. It has been well-maintained and remains in good working condition, making it a cost-effective choice for businesses looking to enhance their machining capabilities. Specifications & Features: Work Area: 1220mm x 2540mm (48" x 100") Table: vacuum table Spindle Type: 2x High-speed router spindle Control System: AXYZ proprietary CNC control Ppodpfsvzaguox Af Rjw Drive System: Stepper motor-driven for precision movement Material Compatibility: Suitable for cutting wood, plastics, aluminum, composite materials, and more Software Compatibility: Works with standard CAD/CAM software Manufactured In: Canada Condition: Used, in good working order Key Benefits: Canadian Quality: Built to high manufacturing standards for reliability and longevity. Precision & Efficiency: Capable of intricate cuts and engravings with high accuracy. Versatile Applications: Ideal for signage, woodworking, prototyping, and light metalwork. Cost-Effective Investment: A budget-friendly alternative to purchasing a new CNC router. This AXYZ 4010 CNC Router is an excellent addition for workshops, sign-making businesses, and fabrication shops seeking a dependable machine at an affordable price.

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,250 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 30, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker waste material shredder, wood shredder, chipper, shredder MHR630 proline Ppjdpfx Afjzlbxie Row The MHR proline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideally suited for craft businesses, recycling companies, and industrial operations seeking an economical yet powerful solution. The machines are manufactured in our factory in Germany and sold directly. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - 2 knife rows for increased throughput - Robust construction - Larger feed opening - Excellent value for money - Ready to connect - Siemens PLC controlled - MHR630 proline Rößler waste material shredder – “Made in Germany”

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Podpjzk Npgjfx Af Ropw Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2018, Second-hand angle unit For woodworking CNC machining centres Year of manufacture: 2018 HSK 63 F shank with torque support with 2 horizontal tool spindles Suitable for mounting a CLAMEX grooving tool as well as a saw blade Technical specifications: Max. drive speed: 8,000 rpm Max. output speed: 12,000 rpm Permissible operating temperature: 85° Unit can be swivelled 360° around the drive shaft Sound level: 80 dB(A) Podpezk Nlujfx Af Rspw Weight: 3.257 kg Availability: at short notice Storage location: Hochheim

Condition: excellent (used), Mesh size 50x50 mm. Engine power: 19.5 kW. Inlet: 42 cm. Ppodpfx Aszldmvof Row

Condition: like new (used), Various inserts for the Maweg gluing press. Various dimensions, mostly unused. Made of laminated oak. Psdpfx Afsfl Ikkj Rjpw

Condition: good (used), Grecon notching system Infeed with cross buffer for packet formation 2 milling machines connected, 600 mm table width each milling machine with glue rollers - automatic transfer Pjdpoh I Dufjfx Af Rjpw - continuous press feed - crosscut saw - outfeed roller conveyor with cross transfer Input widths 500 - 4000 mm The system has been dismantled and is available for immediate delivery. The control system is defective; a new control system with program is included. It has not been installed, and the program has not been tested.

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Base machine 555 - Machining dimensions for contour milling: - X = 3514 mm - Y = 1544 mm - Maximum machining dimensions: - X = 3868 mm Pedpfxozk N Hlj Af Rspw - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 brackets, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis and 6 in the Y-axis - available individually - T-shaped layout - max. drilling diameter 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Direction of rotation: alternating clockwise and anti-clockwise - n = 4725 rpm, infinitely variable - 2 horizontal drilling units in the X-direction, 1 horizontal drilling unit in the Y-direction - Sawing unit 7946: - Motor: 3.5 kW - 90° pneumatically swivelling - n = 5300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in the X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for lock case milling - Tool changer 7996: - 18-position magazine (turret) - Vacuum pump with a capacity of 140 m³/h - Handheld control unit - PC control system with TwinCAM WOP system - Siemens control system Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Cantilever machine (6 units) - Travel dimensions: X = 3,490 mm Y = 1,690 mm Z = 205 mm - Machining dimensions: X = 3050 mm Y = (Max. milling depth – tool radius) 1,345 mm Z = 150 mm - TF 20 drilling head - Power 2.2 kW - 8 vertical spindles, spindle spacing 32 mm in the X direction Podpozk Nz Asfx Af Repw - 6 vertical spindles, spindle spacing 32 mm in the Y-axis - 2+2 horizontal spindles in the X-axis - 1+1 horizontal spindles in Y-axis - with integrated 120 mm grooving saw blade - with 9.2 kW electric milling spindle with ISO 30 mount - with C-axis - with angle unit - with 12-position tool changer - with tool change station for angle units - with vacuum pump 80–100 m³/h - Total connected load 16 kW - Compressed air 6 bar - Compressed air consumption 210 NL/m - Extraction connection 250 mm - Extraction volume 5,300 m³/h - Extraction velocity 30 m/sec - Dimensions: 5940 x 3800 x 2510 mm - Weight: 3,700 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2007, Second-hand machine Year of manufacture: 2007 Features and technical specifications: Nesting system with grid table Machining dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Travel ranges: - X: 5665 mm - Y: 1650 mm - Z: 325 mm Ppjdpfxezk Nvgj Af Row with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc-type tool changer with 250 m³ vacuum pump with manual control unit with central lubrication with minimum quantity lubrication system Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: Travel ranges: - X-axis: 2,685 mm – Y-axis: 1,095 mm – Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm Tool changer: 6-position, side-mounted Podpfxezk Nu Nj Af Ropw Drilling head: - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw in the X-direction Control system: Twin CAM 32 Vacuum pump 100 m³/h Including vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 2004, Second-hand machine Year of manufacture: 2004 Condition: Tested and in working order Features and technical specifications: Travel ranges: - X-axis: 2,685 mm Ppjdpozk Nmfjfx Af Rsw – Y-axis: 1,095 mm – Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm - Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw: in the X-direction Control system: Twin CAm 32 Vacuum pump: 100 m³/h Including vacuum suction cups Dimensions 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: new, Year of construction: 2026, Description of the machine: Psdpfx Ajwtp Rljf Rspw Efficient and fast cutting of large diameter wood Stable and durable construction resistant to overloading Safe operation thanks to pivoting system Easy to use and maintain Carbide circular saw included Technical data Maximum diameter of blade/hole [mm] 700x30 Maximum height of wood [mm] 280 Maximum width of wood [mm] 290 Disc speed [rpm] 1400 Motor power 5 kW Power supply 400V Weight 92, 5 kg Dimensions [mm] 1170x770x1070 Declaration CE yes

Condition: ready for operation (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, machine/vehicle number: 07/21/158, power: 55 kW (74.78 HP), fuel type: electric, hopper volume: 2,800 l, rotational speed (max.): 90 rpm, rotor diameter: 500 mm, The machine has been used very little and is therefore in good condition with new blades! TECHNICAL DETAILS Infeed and Hopper Infeed opening: 1,800 x 1,500 mm Hopper capacity: 2.8 m³ Rotor Rotor diameter: 354 - 500 mm Rotor speed: approx. 90 rpm Tools and Screening Tools V5 + V7: 45 / 90 / 135 / 180 pcs. Screen opening: 10 - 50 mm Extraction Extraction nozzle diameter: 250 mm Air velocity: 32 m/s MACHINE DETAILS Performance and Drive Power: 55 kW (74.78 hp) Fuel type: electric Psdjzkg Sfjpfx Af Rjpw Power requirement, dual drive: 2 x 45 / 2 x 55 kW Weight: approx. 5,800 kg EQUIPMENT Rotor shaft made of solid steel Hydraulic feed for constant material flow to the rotor Cardan-mounted hydraulic cylinders to prevent premature wear of the piston seals Screens with various screen openings for the required chip size, depending on the material and application Safety package with gearbox limit switch and reversing counter Changeable basket available New blades Note: Further technical information, such as the machine dimensions, can be found in the attached data sheet.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, number of slots in tool magazine: 23, total length: 10,000 mm, total width: 4,100 mm, Equipment: CE marking, documentation/manual, HOMAG BMG 311 Venture 316 XXL – 5-Axis CNC Machining Centre Lightly used and maintained in excellent condition, this HOMAG BMG 311 Venture 316 XXL is almost like new. The machine is equipped with a powerful 5-axis machining unit, 23-position tool changer, multiple vertical and horizontal drilling heads, grooving saw blade, and extensive routing and drilling capabilities. Ppsdpfxjzp Ih Ej Af Row It is suitable for complex furniture, cabinet, door, panel, and solid-wood machining applications. Thanks to its versatile configuration, the machine can perform routing, drilling, sawing, grooving, and angled machining operations in a single setup. A highly capable and well-equipped CNC machining centre with very low operating hours, ready for immediate production.

Year of construction: 2009, condition: new, Face plate and drive plate set in a wooden box. Ppedpfx Afodr Iupj Rjw

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW Pedpfx Afoza Ei Ne Repw - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL SPECIFICATIONS Ppsdpfx Afeza D T Te Rjw - Infeed width: 720 mm - Infeed height: 160 mm - Maximum input material thickness: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Infeed pressure feed roller motor: 0.75 kW - Lower toothed feed roller motor: 1.8 kW - Upper toothed feed roller motor: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse (with adjustable control) - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German manufacture – Very low hours – Original documentation – Used shredder, condition very good / excellent Net price: 139,900 PLN Net price: 33,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy Pjdozadr Nopfx Af Ropw – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)