Used **Used Harrison** Center Lathe for sale (60,683)

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 5V0168, MACHINE SPECIFICATION Height of centres 280mm Swing over bed 554mm Swing over cross slide 370mm Swing in gap 830mm Width in front of faceplate 216mm Bed length between centres 2000mm Gedpfx Afszna Twjuebu Spindle speeds: number 3 Spindle speeds: ranges 18-200,55-605, 160-1800rpm Spindle nose mounting Camlock D1-11 Spindle bore 104mm Taper in nose bush No. 5MT Width over bedways 400mm Travel of cross slide 300mm Travel of top slide 175mm Travel of tailstock barrel 178mm Tailstock in tailstock barrel No. 6MT Approx. Weight 3650Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chuck Quick change toolpost and 4-off toolholders Bedstop Lighting Chuck guard Coolant system Rear splashguard

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: P40030, Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe. Specification Harrison Alpha 460plus Height of centres 230mm Distance between centres 1000mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Gap width from faceplate (approx) 216mm Spindle bored to pass 76mm Spindle speeds: Low range 2 to 500rpm High range 20 to 2000rpm Tailstock travel 145mm Tailstock diameter 95mm Tailstock taper No. 6 MT Approximate weight 2760kg Harrison Alpha 460 Plus Gap Bed CNC Lathe with Fanuc Machine equipped with Gbjdpfx Asnxkcqefuju 3 jaw chuck Quick change toolpost and 4 off toolholders Harrison/Fanuc GE operator panel and screen Stationary steady Guarding Lighting Coolant system

Condition: excellent (used), Year of construction: 2011, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Gedpfx Aox D Uf Tsfuebu Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rpm 415V, 3 Phase Electrics. Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck 4 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Universal lathe Harrison M250 Gbjdpfxjz N Skvo Afueu The machine is in very good condition, not used in production. It served as an auxiliary machine in the maintenance department of the printing house. Technical data: Turning diameter over the bed: 280 mm Turning diameter over the slide: 170 mm Turning Length: 680MM Rotation speed: 40 – 1500/9 step U / min Spindle bore: 35 mm Tailstock taper MK: 3 Tailstock quill travel: 95 mm Total power requirement: 1.5 kW Machine weight approx .: 410 kg Dimensions L x W x H: 1.6 x 0.8 x 1.4 m The machine is equipped with an electronic position reading Insize ISL-DR2

Condition: used, functionality: fully functional, turning diameter: 290 mm, center height: 145 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, total height: 1,200 mm, total length: 1,500 mm, total width: 700 mm, 3 Phase 380V motor is running fine! Left & right running. Electronic engine brake. Geared headstock, gears running in oil. 9 Spindle speeds adjustable from 52 up to 2000 RPM. Metric lathe. Norton gearbox for easy thread cutting. Gbsdpfxswfiaqj Afuou Power feed in both side as cross ways direction. Original Harrison splash guard. D1-3 Camlock spindle nose. Multifix quick change toolpost with a total of 4 toolholders. MT3 Tailstock intake. Distance between centers: 800mm Center height: 145mm Spindle bore: 35mm Overall dimensions: 150x70x120cm Made in the UK. Contact us for shipping options! €3,900.00 Ex VAT

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter: 335 mm, center height: 165 mm, turning length: 1,016 mm, spindle speed (max.): 2,500 rpm, overall weight: 900 kg, three-jaw chuck diameter: 200 mm, For sale is a Colchester lathe with accessories in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Colchester • Model: Master-2500 • Distance between centers/turning length: approx. 1,016 mm • Center height: approx. 165 mm • Turning diameter over bed: approx. 335 mm • Turning diameter over carriage: approx. 210 mm • Max. spindle speed: approx. 2,500 rpm • Spindle nose: 4 in. D.1. Camlock • Spindle bore: approx. Ø40 mm • Three-jaw chuck: approx. Ø 200 mm (Pratt Burnerd) • Weight: approx. 900 kg • Tailstock quill: MK3 • Motor power: approx. 5 hp • With accessories: Set of jaws for the chuck, quick-change tool holder, centers, etc. Gbsdpfjz Dbkyox Afueu • Condition: Used, functional Shipping costs via freight forwarder are possible (please inquire with your postal code). International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: excellent (used), For sale: a legendary, German-made WEILER Matador precision lathe (accuracy class according to DIN 8605 for toolrooms). The machine was imported from Germany and is in beautiful, original condition (original paint, no signs of industrial wear). The machine underwent rigorous technological tests under power – it is 100% functional, and the accuracy and repeatability achieved during test turning over the length of the shaft resulted in a difference of only 0.02 mm! The bed and lead screw are in perfect condition, which guarantees the precision for which the Weiler brand is known. This is an extremely compact version, ideal for precision model-making workshops, toolrooms, component refurbishment, or laboratories. Technical specifications: • Manufacturer: WEILER (Germany) • Model: Matador (VS1 series) • Swing over bed: 280 mm • Swing over cross slide: 160 mm • Distance between centers: 500 mm • Taper in tailstock: Morse 3 (MK3 / MT3) • Spindle speed range: 30 – 3550 rpm (16 spindle speeds – ideal for modern indexable inserts) • Chuck: 160 mm Very extensive equipment included in the price: Gjdpfxjz I Ef Ae Afujbu 1. Original Haidenhain digital readout (DRO): Factory-installed display system with scales, 100% functional and reading the axes. 2. Quick tool change system (Multifix): Original quick-change tool holder with a tool block. 3. Set of additional change gears: A complete set of gears for configuring the change gear mechanism for custom feeds/threads. 4. Tailstock equipment: Precision rotating center included. 5. Starter kit: Basic set of turning tools, allowing you to start working immediately. 6. Safety: Complete guard for the work area above the chuck, and factory-installed, bellows-type guards for the screws and lead screw. Logistics: • The machine can be fully tested and the accuracy tests can be repeated on-site under power. • LOADING INCLUDED IN THE PRICE – I provide safe and professional loading of the machine onto your transport using a forklift. Price: 24,200 PLN net (negotiable). VAT invoice provided.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 1,650 mm, turning diameter: 2,000 mm, turning length: 8,000 mm, faceplate diameter: 2,000 mm, SMTCL (Shenyang No.1 Machine Tool Works) CW61200 universal horizontal center lathe, year of construction 2005, made in China. The bed ways are in good condition and the machine is in active production use. Technical data: - Faceplate / chuck diameter: 2,000 mm - Turning diameter over bed: 2,000 mm - Turning diameter over cross slide: 1,650 mm - Turning length / machining capacity: 8,000 mm (8 m) Gsdpfoz Anxqex Afuebu Equipment: - 2 x standard steady rest - 1 x heavy-duty steady rest - Digital readout (DRO), retrofitted by us In good working order and ready for immediate delivery.

Condition: good (used), functionality: fully functional, spindle bore: 37 mm, turning diameter: 250 mm, turning diameter over bed slide: 250 mm, center height: 125 mm, turning length: 1,000 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,200 mm, spindle speed (max.): 2,000 rpm, rotational speed (max.): 2,000 rpm, Manufacturer: Harrison Gbodpfx Aex Rrpfjfusu Model: M-250 Condition: Used Maximum turning diameter over bed: 250 mm Maximum turning length between centers: 1000 mm Spindle bore: 37 mm Maximum spindle speed: 2000 rpm Spindle mount: Camlock Toolholder type: Drehblitz Machine dimensions (L x W x H): 150x80x120 Connection voltage: 400 V Cooling system: Yes Digital readout: Yes, 2 axes

Condition: used, Year of construction: 2003, turning diameter over bed 330 mm centre distance 1.000 mm centre height 167 mm spindle bore 38 mm turning diameter over cross slideways 210 mm spindle tunring speed 40 - 2.500 U/min x-axis 190 mm z-axis 92 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Gedpey Ty I Isfx Afusbu Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2015, gebraucht 2015 1686 prompt, Zwischenverkauf v Gbjdpswiqv Iefx Afuju England 14800 € 1 330 mm 1000 mm 167 mm 38 mm 210 mm 12 40 - 2500 1/min 16 0.03 - 1 mm/U 0.2 - 14 mm 2 - 56 TPI Gänge/" 190 mm 92 mm 42 mm 3 MK 110 mm 2.2 kW 1940 mm 1000 mm 1550 mm 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, functionality: fully functional, spindle bore: 60 mm, total length: 2,600 mm, type of input current: three-phase, spindle mount: MK 5, Equipment: rotational speed infinitely variable, Well-maintained and stable Cazeneuve HBX590 center lathe 1000 mm between centers Turning diameter above the bed: 580 mm Gbsdpfxsz Ar A Tj Afuou Spindle bore: 60 mm Tool holder: MK5 Motor: 11 kW Speed control via Facom frequency inverter with speed control on the dashboard. Includes the following accessories: Fixed steady rest Protective guards (prevents coolant from dripping onto the floor) Machine lamp Coolant system Axial stop for the main spindle Acurite digital readout Hydraulic system cleaned and fluid replaced in 2025. Comes with the original tool holder. A multifix C can be included for an additional charge. Make a good offer and this versatile lathe can be yours! If you have any questions or would like more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, WE OFFER UNIVERSAL LATHE WITH BRAND NEW 3 AXIS DIGITALS COMPLETE TOOLS AND ACCESSORIESS. DESCRIPTION Description Precision lathe, turning machine -Manufacturer: VDF Heidenreich & Harbeck -Machine bed rails: hardened -Turning length: 750 mm -Turning Ø over bed: 500 -Turning Ø over recess: 355 mm -Turning Ø over support: 290 mm -Spindle bore: Ø 56 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Drive: 7.5 kW Gbedpfxsvkpkze Afusu -Accessories: 1x steady rest, 6x Multifix tool holder, -Dimensions: 1180/3050/H1345 mm -Weight: 2000 kg

Condition: good (used), functionality: fully functional, For sale is a robust TOS Trenčín SUI 40 guide and lead screw lathe with a center distance of 1,500 mm. This machine comes from an industrial setting and impresses with its massive cast iron construction, high rigidity, and excellent smooth running. The proven SUI series from TOS is one of the most durable conventional lathes in its class and is still valued today in industry, toolmaking, and training workshops for its precision and reliability. The machine is in a well-maintained, used condition. All essential components are present. The machine bed shows a good overall condition; guides and supports appear well-maintained. The mounted three-jaw chuck, four-position tool holder, tailstock, and safety guard are included in the offer. Equipment: ✓ Center distance 1,500 mm ✓ Massive machine bed ✓ Guide and lead screw ✓ 3-jaw chuck ✓ Four-position tool holder ✓ Tailstock ✓ Coolant system ✓ Safety guard on the chuck ✓ Emergency stop switch ✓ Industrial version Gbjdjzmp Tkjpfx Afusu Application areas: Ideally suited for: Mechanical engineering Toolmaking Maintenance Workshops Repair shops Training workshops Single-piece and small-batch production Condition: Used Good overall condition Signs of wear consistent with age Inspection is highly recommended Sale from the current location

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection Gjdpfx Afjz D Hx Nouobu >> Back wall >> Coolant system >> Machine feet At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. About the machine: A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up.

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Godpfx Ajz A Tgqjfujbu Technical Data: >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Operating manual, electrical diagrams, and much more About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Digital display available for an extra charge.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm Godsyuyruepfx Afuobu - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 235 mm, spindle bore: 52 mm, turning diameter: 400 mm, center height: 200 mm, turning length: 1,000 mm, Lathes Series PREMIUM CU 400 RD-Vario Our universal lathes and lathes with stepless speed control from the PREMIUM CU series feature a wide range of features and accessories for customers across various industries. The PREMIUM CU series allows precise adjustment of cutting speed to suit material and turning diameter – especially advantageous for non-ferrous metals, plastics, and for achieving perfect surface finishes on precision parts and fits. A notable highlight is the integrated R/L control units mounted on the tool slides, enabling simple switching between clockwise and counterclockwise spindle rotation. These replace the conventional shift rods typically found on universal lathes. The machine is equipped with electromechanical spindle brakes for extremely fast spindle stops, ensuring efficient handling. The leadscrews are fitted with overload protection. Performance Data and Specifications: Center distance: 1000 mm Center height: 200 mm Swing over bed: 400 mm Swing over cross slide: 235 mm Swing without bridge: 550 mm Bed width: 320 mm Cross slide travel: 235 mm Top slide travel: 110 mm Maximum turning tool cross-section: 25x25 mm Chuck mounting: DIN 55027 No. 6 Spindle (main spindle) taper: MK 6 mm Spindle bore: 52 mm Speed Range 1, stepless: 18 – 98 rpm Speed Range 2, stepless: 48 – 265 rpm Speed Range 3, stepless: 144 – 790 / 385 – 2120 rpm Longitudinal feeds (80): 0.015 – 0.6 mm/rev Cross feeds (80): 0.0075 – 0.3 mm/rev Metric thread pitch (40): 0.25 – 7.5 mm Metric module threads (40): 0.0625 – 1.875 mm Inch threads, TPI (40): 120 – 4 TPI Inch module threads, TPI (40): 480 – 16 TPI Tailstock quill taper: MK 4 Tailstock quill diameter: 50 mm Tailstock quill stroke: 100 mm Motor power: 7500 W Power supply: 400/50 V/Hz Total length: 2350 mm Total height: 1330 mm Weight: 1590 kg Standard Equipment: - RÖHM 3-jaw chuck - 5-piece quick-change toolholder set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Tool slide with splash guard - Machine base / chip tray / splash wall - Tool set / operating manual / CE PREMIUM CU Series Standards: - Heavy-duty grey cast iron machine bed, excellent vibration damping - Removable bridge - Prismatic guideways - Hardened and precision-ground main spindle, high concentricity, adjustable precision bearings - Smooth-running main spindle and feed gearbox in oil bath - Gears made of case-hardened chromium-nickel steel, hardened and precision ground Gbedpfx Afjy Hlxfeueu - Feed reverse function - Covered trapezoidal thread leadscrew, hardened, precision ground - Tool slide with locking nut - Precisely adjustable slideways - Solid tailstock with offset - Machining accuracy according to DIN standards Including 3-axis digital position display This machine is available for immediate delivery and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For information on equipment, please contact us.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: K0218, spindle bore: 105 mm, total length: 8,000 mm, total width: 1,500 mm, total height: 1,500 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 13 rpm, overall weight: 6,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 26 A, nominal power (apparent): 15 kVA, DMTG DALIAN CW 6163 E: Guide-way and lead screw lathe - Machine year of manufacture: presumably 2018 - Distance between centers: 5000 mm - Distance between centers above the bed: approx. 350 mm - Swing over bed: approx. 700 mm - Distance between centers above the carriage: approx. 250 mm - Swing over carriage: approx. 500 mm Gbsdpfxez Rwlzj Afuju The machine is equipped with a tailstock, a Multifix clamping system, and a three-jaw chuck, diameter: 300 mm, including two steady rests. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck.

Condition: excellent (used), functionality: fully functional, Weiler high-precision lathe, model Condor 81, center lathe with 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture: 1982, Machine no. 82 016 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch Gjdpfxoz Ehzzo Afusbu >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake: can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 1 three-jaw chuck, 160mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back panel >> Coolant system >> Machine feet At an additional cost: Collet chuck system, new, and collets, new, from 3 to 26 mm in 1 mm increments. About the machine: Offered is a used Weiler Condor 81 in very good condition. It comes from a training center and has been well maintained. The machine is fully functional, of course. It is a very robust and powerful machine. The new 3-axis digital display from K&C makes the work even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: like new (used), Year of construction: 2022, operating hours: 25 h, functionality: fully functional, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, turning diameter over top slide: 210 mm, center width: 635 mm, quill stroke: 110 mm, total length: 1,700 mm, total width: 1,000 mm, total height: 1,400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 40 rpm, type of input current: three-phase, overall weight: 700 kg, Equipment: documentation/manual, type plate available, Colchester Student 2500 lead and feed spindle lathe (year of manufacture 2022) – including digital display and Multifix quick-change tool holder For sale is a precise Colchester Student 2500 lead and feed spindle lathe. The machine is in new condition. It is fully functional and in stock in Austria (Graz). It features an ACU-RITE digital display and a MULTIFIX quick-change tool holder. • Manufacturer: Colchester • Model: Student 2500 • Year of manufacture: 2022 • Condition: New (used) • Functionality: 100% functional • Location: Graz, Austria • Images/Videos: Images and videos of the machine will be provided upon request. Technical data: • Distance between centers: 635 mm • Swinging diameter over bed: 330 mm • Swinging diameter over cross slide: 210 mm • Swinging diameter over compound slide: 330 mm Gbsdpszkhvrefx Afusu • Swinging diameter in the gap: 480 mm (removable bridge) Spindle and drive: • Main spindle bore: 40 mm • Spindle mount: DIN 55029 D1-4 • Spindle speed (max.): 2,500 rpm • Speed steps: 12 (speed range: 40–2,500 rpm) • Drive power: 2.2 kW Tailstock and feeds: • Taper in tailstock: MK 3 • Quill stroke: 110 mm • Longitudinal feeds: 0.03–2 mm/rev • Cross feeds: 0.015–1 mm/rev • Metric threads: 0.2–14 mm • Whitworth threads: 2–56 threads per 1" Dimensions and weight: • Weight approx.: 700 kg • Dimensions (L × W × H): 1,700 × 1,000 × 1,400 mm EXTENSIVE EQUIPMENT • 2-axis digital display: ACU-RITE® DRO 203 for precise working • Tool holder: Quick-change steel tool holder MULTIFIX • Safety: Foot brake with brake pedal along the entire length, chuck guard, spindle cover, movable steel tool holder guard • Cleanliness: Chip collection tray with front opening flap, rear splash and chip guard • Extras: Integrated coolant system, work area lighting, threading dial • Documentation: Original operating manual including CE declaration of conformity Interested? An inspection with the machine powered on can be arranged.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: P018, spindle bore: 105 mm, total length: 7,000 mm, total width: 1,000 mm, total height: 1,500 mm, overall weight: 5,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 26 A, nominal power (apparent): 15 kVA, DMTG DALIAN CW 6163 E: Guide and lead screw lathe - Machine year of manufacture: probably 2018 - Distance between centers: 4000 mm - Center height above bed: approx. 315 mm - Turning diameter above bed: approx. 630 mm - Center height above carriage: approx. 180 mm - Turning diameter above carriage: approx. 360 mm The machine is equipped with a tailstock, a Multifix clamping system, and a three-jaw chuck, diameter: 300 mm, including two steady rests. Gjdsz Rwz Njpfx Afusbu FCA D-73529 Schwäbisch Gmünd - loaded onto a truck.

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Gsdpfswhylvsx Afujbu Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: refurbished (used), functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 90 mm, turning diameter: 630 mm, turning length: 3,000 mm, quill stroke: 200 mm, total length: 4,700 mm, total width: 1,420 mm, total height: 1,650 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 18 rpm, type of input current: AC, overall weight: 3,600 kg, workpiece weight (max.): 1,500 kg, Lathe FAT TUR 630 x 3000 mm - Fully Overhauled (Like New Condition) For sale is a conventional universal lathe, FAT TUR 630M x 3000, which has undergone a complete overhaul. The machine is in technically and visually like-new condition and meets the highest precision standards. Work performed during the overhaul: • Bed & Guides: All guide rails of the machine bed were precisely ground. The support guides were re-aligned and scraped. • Bearings: Complete replacement of all bearings. • Mechanics: All gearbox housings were cleaned, gears were inspected, and seals were renewed. • Electrical System: Fully refurbished. • Geometry: The machine was leveled and checked according to the acceptance protocol (as per factory standards). • Appearance: Industrial coating RALK 6011. Technical Specifications: Conventional Lathe TUR 630 Main Parameters / Working Range • Turning diameter over bed: 630 mm • Turning diameter over cross slide: 380 mm • Distance between centers: 3,000 mm • Bed width: 433 mm • Max. workpiece weight between centers: 1,500 kg Headstock / Spindle • Spindle bore: 90 mm • Spindle speed range: 18 – 1,800 rpm • Number of speed steps: 21 • Spindle nose: DIN 55027 - No. 8 Tailstock • Tailstock spindle diameter: 90 mm • Tailstock quill stroke: 200 mm • Tailstock quill internal taper: Morse taper MK 5 Drive / Motor • Main motor power: 15 kW Feeds and Threads • Range of longitudinal feeds: 0.08 – 3.25 mm/rev • Range of transverse feeds: 0.04 – 1.62 mm/rev • Number of feed ranges (each): 42 • Rapid traverse – longitudinal: 4 m/min Godpfjz Izdbex Afuobu • Rapid traverse – transverse: 2 m/min Thread cutting range • Metric threads: 1 – 120 mm • Inch threads (Whitworth): 28 – 1/4 G/inch • Module threads: 0.25 – 30 mm • DP threads (Diametral Pitch): 112 – 1 DP _____ Dimensions and Weight (for length 3000 mm) • Machine weight (approx.): 3,600 kg • Dimensions (L x W x H): approx. 4,700 mm x 1,420 mm x 1,650 mm _____ The machine is ready for immediate use and can be inspected and tested under power at our location in Hilden. Delivery conditions: • Transport is not included in the price. • Loading onto your truck is included in the price. Delivery date: • Available immediately after agreement. Price: €36,500 plus VAT (net, ex works Hilden) Subject to prior sale. Please do not hesitate to contact us if you have any questions.

Condition: ready for operation (used), Year of construction: 1971, Center lathe, manufactured by VOEST ALPINE, type DA 210, year of manufacture 1971. Chuck: 315 mm, tool holder: Multifix B with 2 tool pockets. Center height: 210 mm Distance between centers: 1000 mm Spindle bore: 46 mm Spindle speeds: 28 - 2000 rpm Gbodpfxjz Eilnj Afuou Further details can be found in the data sheet. Machine in good, ready-to-use condition. Machine documentation available. Weight: approx. 1200 kg