Used Bmi Pritschenaufbau Mit Staukästen for sale (6,575)

Condition: used, mileage: 1,001 km, first registration: 01/2008, color: silver, driver cabin: other, gearing type: other, Year of construction: 2008, Vehicle location: Bovenden, storage compartment Body: Platform body with storage compartments for Daimler-Benz Atego. Dismantling of a Daimler-Benz Atego 1018 AK 4x4 with a 3260 mm wheelbase! ACCESSORY INFORMATION IS WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Hnodpfei Rp Ngsx Akrsu

Condition: new, functionality: fully functional, Aerial work platform, work basket with platform for forklift (like new) Width: 870mm Depth: 870mm Guardrail height: 1020mm / 1500mm / Total height of forklift protection mast: 2330mm Includes extension: 480mm with side access With forklift mounting distance: min: 550mm – max: 940mm Forklift tine receiver: width max. 190mm x height 90mm Hnjdpfx Akezyu Tisrju Available in stock.

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) Hnedjz Ipdvspfx Akrju F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Hedpfoyq Rdysx Akronu Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 Hsdpfx Aezt Ai Ejkrsnu in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Hsdpfxoz Ehfas Akrsnu Stroke: 600 mm Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty. Hnedpswcgr Esfx Akrju

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya10, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Hodpsz Ipunsfx Akrenu Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: used, mileage: 1,001 km, first registration: 01/2012, color: black, driver cabin: other, gearing type: other, Year of construction: 2012, Vehicle location: Bovenden, storage compartments, lashing eyes Body: Platform body with storage compartments for a Daimler-Benz Zetros, steel floor! Hnodpoi N Aknsfx Akreu Dismantling of a Daimler-Benz Zetros 1833 A 4x4 with a 4800mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm Hsdpoykuh Nsfx Akrsnu 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: used, Year of construction: 1988, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Accerories Hnedpfx Akjy S T T Usrou 2 Chip conveyor, rear side disposal Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: used, mileage: 1,001 km, first registration: 01/2014, color: red, driver cabin: other, gearing type: other, loading space length: 5,150 mm, loading space width: 2,460 mm, loading space height: 2,150 mm, Year of construction: 2014, Vehicle location: Bovenden, tarpaulin and side rails, lashing eyes, swing-open rear doors. Body: flatbed with tarpaulin. Dismantling of a MAN TGL 8.180 4x2 BL with a 3900mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Hnsdjzxf S Hopfx Akrju

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Hnedpfxsvy It Te Akreu Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 1950, turning diameter over cross slide: 225 mm, turning length: 425 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 7,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,729 mm, total length: 3,255 mm, total width: 2,612 mm, quill diameter: 80 mm, quill stroke: 100 mm, type of input current: three-phase, For sale is a SAEILO ACE 12+ CNC turning center, manufactured in 2017 and first commissioned in July 2018. It includes a BOSS 552 bar feeder with 32 tool positions, manufactured in 2018. The machine is based on the ACE Designers Jobber LM Elite and is equipped with a FANUC Series 0i-TF control. The machine number is 1950. The machine is currently connected and can be inspected while powered on. It is in used condition with typical signs of wear from industrial use. Hedpozl D Rusfx Akrsnu The scope of delivery includes an IEMCA Boss 552-HD heavy-duty bar feeder, type 32 LL, manufactured in 2018, serial number 021835GA03. The bar feeder weighs approximately 830 kg, operates on 400 V / 50 Hz, and requires 6 bar of compressed air. Technical data of the machine: max. machining diameter 320 mm, swing over bed 500 mm, swing over slide 225 mm, distance between centers 425 mm, X-axis travel 165 mm, Z-axis travel 400 mm, spindle speed up to 5,000 rpm, 8 tool stations, tool cross-section 25 x 25 mm, rapid traverse X/Z 30 m/min, and a machine weight of approximately 4,000 kg. Electrical data: 380/400 V AC, 3-phase, 50 Hz, 24 V DC control voltage, 40 A fuse, 23/22 A rated current, and 15 kVA connection power. Important note: The measuring arm is currently not functioning. Other functions can be tested during an on-site inspection while the machine is powered on. The machine is located in Bocholt. Inspection and pickup are possible by arrangement. Transport and loading are the responsibility of the buyer.

Condition: ready for operation (used), Mitsubishi FREQROL FR-SE-2-7.5K-A-C spindle drive, serial number: 8602, with SE-PW power supply, serial number: 2776742L, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hnedsz Ivv Eepfx Akrsu

Condition: new, first registration: 07/2012, fuel type: diesel, color: red, driver cabin: other, gearing type: other, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,560 mm, Year of construction: 2012, Vehicle location: Bovenden, aluminum body, tarpaulin and spreader bars, lashing eyes. Body: flatbed / tarpaulin, LIKE NEW! Like-new flatbed body from a trade show vehicle, suitable for a frame track of 834 mm, high-strength subframe with a height of 300 mm, crossmember spacing of 375 mm, enclosed with a flatbed outer frame all around, foldable lashing rings with a load capacity of 2500 daN, certified according to DIN 12640, embedded and welded into the outer frame at a spacing of 400 mm. Side board height 600 mm, front wall height 2000 mm, 30 mm thick screen-printed plywood floor, tarpaulin frame in 3 parts, clear side height approx. 2600 mm, 2 lifting points for forklifts in the substructure. Dismounted from a D-Benz Antos 2543L 6x2 with a wheelbase of 4000 mm. New price approx. 16,000 EUR! Also available: 30 more interchangeable bodies for 1,000 to 5,900 EUR! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Hnsdpfxoi Rnq As Akreu

Condition: used, mileage: 1,001 km, first registration: 01/2008, driver cabin: other, gearing type: other, loading space length: 3,840 mm, loading space width: 2,460 mm, loading space height: 1 mm, Year of construction: 2008, Vehicle location: Bovenden, lashing points Body: Flatbed with interchangeable system for fifth-wheel coupling and supports. Dismantling of IVECO-MAGIRUS Euro Cargo ML120E25/28 4x2, wheelbase: 4,185 mm. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Hjdpfxji Rqype Akrenu

Condition: used, mileage: 1,001 km, first registration: 01/2000, color: grey, driver cabin: other, gearing type: other, loading space length: 3,700 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2000, Vehicle location: Bovenden, Doors ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hnjdpfx Akoqzywmsrou - .

Year of construction: 2010, condition: like new (used), BATTENFELD PE PIPE HEAD RK 315, spiral die, screen changer with tool 315 PE Lightly used, in excellent condition. Condition: As new. Hnsdpfehy Aq Isx Akrju The pipe head is my property. Sachal Extrusion Machines Bahnhofstr. 6 D-26345 Bockhorn-Grabstede

Condition: excellent (used), Buderus GE615 /820Kw boiler with Weishaupt burner Hjdpfeq Am Ivjx Akrenu

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Hsdpfxswauaxs Akrsnu

Condition: excellent (used), Buderus GE315/200kw low-temperature boiler with oil burner Hnedpfx Akjwauarsrou

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels Hnsdpfjz I Eggox Akreu with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Year of construction: 1986, condition: used, functionality: fully functional, For sale is a complete silo discharge and conveying screw system from a wood processing production facility. The system was in regular operation until production was halted approximately 6 months ago and was subsequently decommissioned. The complete package includes the mechanical silo discharge system, several conveying screws or transport lines, various gear and electric motors, the complete associated electrical control system in the control cabinet, as well as an additional new or unused spare motor. The system was used for discharging and further conveying wood chips or similar bulk material from the silo towards the heating system. Scope of delivery The offered complete package includes, among other things: - complete mechanical silo discharge system - several conveying screws / tubular screws - existing transport and conveying lines Hedez Iuikepfx Akrsnu - several gear motors and electric motors - Bonfiglioli gearboxes - SEW-EURODRIVE drive technology - NORD gearbox technology - ASEA, ICME and Dietz electric motors - various connection, transition and discharge components - complete control cabinet with control and switching components The complete existing control cabinet is part of the offer. This offer includes not only individual conveying equipment but a comprehensive, cohesive system and spare parts package including the existing control system. Drive technology Various industrial motor and gearbox components from well-known manufacturers are installed. Among others: Bonfiglioli Riduttori Gearbox type MVF 130/2R, 4.00 HP, gear ratio i = 1/35. ASEA Three-phase motor, 0.55 kW, 930 min⁻¹, 380–420 V, protection class IP54. SEW-EURODRIVE Industrial gear motor, 0.55 kW, approx. 1,400/33 min⁻¹. NORD Industrial gearbox, type SK 30F-EC80, gear ratio i = 157.20. ICME Ravenna Three-phase motor, 0.55 kW, approx. 920 min⁻¹, protection class IP55. Dietz-motoren Three-phase motor, 0.4 kW, 2,760 min⁻¹, 220/380 V. Further technical specifications and photos of the existing nameplates can be provided upon request. Condition The used components are in a condition appropriate for their age and use. Signs of wear, dust deposits and some superficial corrosion are present. The system is suitable both for possible further use or adaptation to an existing silo system and as a comprehensive spare parts and components package for silo, heating and conveying technology. In particular, the various gear motors, gearboxes, screw components, the complete electrical control system and the additional new spare motor make the complete package interesting for operators of existing older systems. Inspection / Dismantling The system is still located at the previous production site and can be inspected by appointment. Location: 3608 Thun, Switzerland Availability: immediately Dismantling can begin immediately - must be completed by July 31, 2027. Dismantling, removal, loading and transport will be carried out entirely by the buyer at his expense and responsibility. Sale of the complete system in its existing condition, as inspected. Subject to prior sale. Sale with exclusion of guarantee and warranty. Selling price: 4,500.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Hedpfx Akjzzruterenu Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE