Used Bsta 18 for sale (10,940)

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, functionality: limited functionality, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18 tons). It is designed for continuous production with progressive dies and variable stroke rates from 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feeder, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm to accommodate different tools and material profiles. In addition, a Bruderer U control system from Siemens is installed. The machine is partially functional: The buttons responsible for the two-hand control system respond with a delay or not at all in setup mode during material threading, which makes material threading time-consuming. The machine's spring dampers are worn, causing the machine to vibrate significantly during continuous operation. The rubber mounts for the dies are brittle and breaking off. Iedpjz H H Dqefx An Ijbc The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025. Nominal force: 180 kN (18 tons) Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Main drive: 16 kVA Power supply: 400 V / 50 Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 The machine is currently not running but is still connected so that it can be used in an emergency for production. Dismantling and removal are planned for the end of December, as a crane will already be on site by then to load the machine.

Condition: refurbished (used), Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Ibedpfefmavxex An Isc Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar. More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: good (used), High-Speed punching press - BSTA 18 /600 Stroke power 180 KN (18 tons) Overhauled by Silicon in good working condition Adjustable speed 60 - 600 (strokes) per minute up to 10 strokes in one second Equipped with synchronized double rolls BBV120 feed for strips widths from max. 120 mm Feed pitch up to max. 60 mm adjustable, highly accurate With stroke counter with programmable auto stop and speed counter Machine complete weight approx 1.5 tons Maximum strip width 120 mm Maximum strip thickness 2.2 mm Maximum feed pitch 60 mm Indexing per minute, infinitely variable 60 - 600 strokes Automatic in feed Operators instruction manual Ibsdo Udtyepfx An Iec More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: good (used), Year of construction: 1971, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator Ibsdpszgalqefx An Isc -Manufacturer: Walter Gieseking, Container rotating device, Welding rotating device type SG1 -Load capacity: 1200 kg -Roller spacing: 187 - 1000 mm -Rollers: Ø 175 x 50 mm -Rolling speed: 0.2 to 0.85 m/min Right/Left rotation -Control unit: with manual control, speed control via handwheel -Individual components: see photos -Transport dimensions: 1610/570/H330 mm / 1250/300/H330 mm -Total weight: 217 kg

Condition: good (used), Year of construction: 1966, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device, Welding Rotating Device -Drive motor: -Load capacity: 14,000 kg Ibedszhtuhspfx An Ioc -Roller spacing: 440 - 1800 mm -Rollers: Ø 400 mm / 400/60-305Z -Rolling speed: 0.3 to 1.6 m/min Right/Left rotation -Control unit: with hand control and foot switch -Individual components: see photos -Transport dimensions: 2930/12170/H645 mm / 2620/840/H620 mm -Weight: 1800 kg / 1150 kg

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, input voltage: 230 V, total width: 1,100 mm, total length: 8,000 mm, total height: 2,000 mm, overall weight: 1,300 kg, For Sale: Senio Machinery High-Speed, Full 12x10ML Bottling Line – 2018 Manufacturer: Senio Machinery, China (no longer in business) Ibjdpfjz S Aatex An Ijc Model: SM12-12-8 Year of Purchase: 2018 Condition: Fully operational Application: 10ML e-liquid production (can be modified). - Equipment Overview A high-output, 10ML, fully semi-automatic filling, plugging, capping, and labeling line. Used for 10ML PET bottles and for filling e-liquid (non-aromatic). Equipped with 12 piston pumps. Designed for 120 bottles per minute (BPM) at optimal speed and viscosity. Suitable for e-liquid, liquid filling, and other compatible production applications. • Price in 2017: $103,000 (€92,000) - Condition & Availability The equipment is available for inspection by appointment. Further technical information, photographs, videos, and details can be provided upon request. Location: Aalborg, Denmark

Condition: excellent (used), functionality: fully functional, mileage: 153,232 km, power: 88.26 kW (120.00 HP), first registration: 01/2002, fuel type: diesel, Year of construction: 2002, Manual transmission, 153,232 km, payload 650 kg Iedswzlbvspfx An Isbc

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1235, TECHNICAL DETAILS Production speed: max. 150 bags/min Ibedjz Ng A Hjpfx An Isc MACHINE DETAILS Connected power: approx. 45 kW Operating voltage: 380–400 V Frequency: 50–60 Hz EQUIPMENT CE marking

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Ijdpoztc Tdefx An Iobc Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Edge Guides Andritz Slitter Head New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Model RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Reference: F24 Iodpfx Aozb Imajn Ijbc €8,500, as is

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 7,990 kg, CHIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a comprehensive factory overhaul by CHIRON For sale is a CHIRON FZ 18 S MAGNUM High Speed vertical CNC machining center manufactured in 1998. The machine is equipped with Siemens SINUMERIK control, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also has an oil mist extraction system with a filter. The most important advantage of the offered machine is the comprehensive inspection and overhaul carried out in 2020 by CHIRON. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available for the work performed, confirming the scope of the overhaul. Technical data: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Ibjdpfx Aozdkhqen Ioc Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the comprehensive overhaul carried out by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork carriage adjustment range: 350–1,050 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT Iodpfxez S Nq Ss An Ijbc 3rd and 4th valve Formerly a Linde full-service machine Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157

Condition: used, maximum load weight: 10,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2006, loading space length: 7,000 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 38 m³, Equipment: ABS, tail-lift, Lanz + Marti EU 18 Refrigerated box van with pass-through system, 38 m³ LBW Internal number for inquiries: 1026907 * Body manufacturer: Lanz + Marti * Type: EU 18 * Tare weight: 6,200 kg * Refrigerated box van * Pass-through system * ABS * EBS * 2-axle, air-suspended * Aluminum underrun protection * Interior lighting * Lashing rails on the left/right Tail lift: Zepro Iodpfez S R Ncex An Isbc Load capacity: 2,000 kg Dimensions (loading area/loading space) Loading area length: 7,000 mm Loading area width: 2,480 mm Loading area height: 2,200 mm Tires: * Front axle: 385 / 55 R 22.5, air-suspended / 35% * Rear axle: 385 / 55 R 22.5, air-suspended / 35% ----Price: 2,900 EUR + 19% VAT For further questions, you can reach us on the following telephone numbers: We speak: German, English, French, and…? Typographical errors, errors and prior sale are subject to change.

Condition: good (used), functionality: fully functional, total height: 2,100 mm, total width: 1,400 mm, table length: 480 mm, table width: 450 mm, pressing force: 30 t, distance between side stands: 280 mm, year of last overhaul: 2026, Stroke: 16-40 mm Strokes per minute: 100-600 Ibedpfez Hk I Tex An Ioc

Condition: excellent (used), Year of construction: 1995, pressing force: 60 t, Manufacturer: Bruderer Model: BSTA 60HL Year of manufacture: 1995 Adjustable stroke: 20–76 mm Speed ​​range: max. 100–750 strokes/min Ram size: 700 x 456 mm Tool mounting surface: 920 mm x 620 mm Feed pitch: 0–200 mm Table size: 770 x 620 mm Ibjdpfx Aez Rndnon Ijc Dimensions: 2480 x 1560 x 2360 mm Weight: 8 t

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, color: white, gearing type: automatic, number of seats: 18, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Opel Movano tour bus/school bus (identical to Fiat Ducato) / Tour buses, several vehicles available immediately Stock vehicles / Warehouse vehicles, available for immediate delivery Different equipment lines COC for 16 + 1 seats Conversion as follows: - Acoustic and thermal insulation from the passenger compartment - Tinted windows (grey / black) in the original opening - 16 reclining seats plus co-driver's single seat + driver's seat = 18 total, also available with a double co-driver's seat, then a total of 19 - (Of course, the vehicle can also be fitted with 16 seats for a driver's license D 1) - Upon request, a co-driver's seat or a small table can be installed next to the driver's seat. - Convector heater in the passenger compartment - Air conditioning in the passenger compartment, optional with a second compressor - Multi-stage night lighting, white / orange - Roof hatch - Electric drive for the original sliding door - Electric step at the original sliding door - On request, also available with an electric outward-swinging door - Reinforced rear axle Optional: On request, available as Fiat Ducato, Citroen Jumper, Peugeot Boxer or Opel Movano. Various equipment lines in stock. Iodpfxsz S T Eao An Isbc - Electric center door + €2,000.00 - Double-width center door + €3,000.00 (loss of 1 seat) - 5 standing places - Automatic transmission - 180 hp Base vehicle with air conditioning, manual transmission, parking distance control with reversing camera, radio with hands-free system, multifunction steering wheel, ... Wheelbase 4035 mm Overall length 6223 mm Height 2522 mm Width 2050 mm Permissible total weight 4500 kg !! Special equipment: Airbag driver/passenger side, Cool & Sound package, Electrical interface for additional conversions, Driver assistance system: Park assist system with reversing camera, Light package 1, Tire repair kit, Seats in the driver's cab: adjustable co-driver's single seat, Seats in the driver's cab: heated driver's seat Additional equipment: Exterior mirrors, single tires on 2nd axle / rear axle, Driver assistance system: Side wind assist, Generator 185 A, Rear wing doors with tinted windows (opening angle 180 degrees), High roof H2, Permissible total weight 4.25 t, Body/superstructure: Box high-roof, Body variant: Vehicle length L4, Body variant: High roof (H2), Fuel tank: 80 liters, Steering column (steering wheel) adjustable, Headlamp range adjustment, Model update, Engine 2.3 L - 103 kW CDTI, Pollen filter, Long wheelbase, Low emission according to emission standard Euro 6e-TEMP, Sliding door cargo/passenger compartment right, Side marker lights, Visibility package, Steel rims 6.5x16, Daytime running light LED, Permissible total weight 4.25 t, Speed limitation 90 km/h Net export possible All information without guarantee These are German vehicles / no re-imports. On request, also Citroen/Peugeot/Fiat Ducato or Opel Movano possible. We make shipments worldwide.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,721 h, load capacity: 1,800 kg, lifting height: 200 mm, fuel type: electric, gearing type: other, battery capacity: 200 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), total length: 1,700 mm, total width: 720 mm, fuel: electricity, STILL EXU 18 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 200 mm Fork length: 1.150 mm Drive: Elektro 24V Battery: 24V/200 Ah (2013)-GEL Charger: Sonstiges Ladegerät integr. Transmission: Impuls Tyres: Bandage BA v: Tandem Iodpsz R T Nqsfx An Isbc Length: 1.700 mm Width: 720 mm Year of manufacture: 2013 Operating hours: 3.721 h Condition: working condition EQUIPMENT Pulse control Internal no.: 1308247 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), Year of construction: 1998, HIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a major factory overhaul by CHIRON For sale: a vertical CNC machining center, CHIRON FZ 18 S MAGNUM High Speed, manufactured in 1998. The machine is equipped with a Siemens SINUMERIK control system, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also features an oil mist extraction system with a filter, plus air conditioning for the control system. The most important advantage of the offered machine is the major inspection and overhaul carried out by CHIRON in 2020. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available, confirming the scope of the overhaul. Technical specifications: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control system: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Iedpezdklpefx An Iebc Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the major overhaul performed by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, Equipment: ABS, Kögel AW 18 BDF interchangeable chassis, SAF axles Internal number for inquiries: 0525379 * Condition: very good * Manufacturer: Kögel * Type: AWE 18 * Tare weight: 2,880 kg * First registration: 05/2018 * ABS * EBS * SAF axles * 2-axle air suspension * Aluminum underride guard * Disc brakes Tires: * Front axle: 445 / 45 R 19.5, air suspension / 30% * Rear axle: 445 / 45 R 19.5, air suspension / 40% ----Price: €6,900 + 19% VAT For further questions, you can reach us at the following phone numbers: Ibodsz S R Nvspfx An Ioc We speak: German, English, French, and...? Typographical errors, errors and prior sale are subject to change.

Condition: used, Year of construction: 2008, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Including sound insulating cabin. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ijdozh Nnwjpfx An Ijbc Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: used, functionality: fully functional, machine/vehicle number: 141B, mileage: 715,402 km, power: 294 kW (399.73 HP), first registration: 06/2016, fuel type: diesel, empty load weight: 7,232 kg, maximum load weight: 44,000 kg, overall weight: 19,000 kg, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 12/2026, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, Year of construction: 2016, Equipment: ABS, AdBlue, EBS, air conditioning, cruise control, differential lock, electronic stability program (ESP), parking heater, power assisted steering, soot filter, traction control, MAN TGS 18-400 BLS – 4X2 – HIGH LX CAB – EURO 6 FIRST REGISTRATION: 06/27/2016 715,402 KMS ENGINE: 12.4 L – 400 HP EURO 6 COMPLIANCE AD BLUE HIGH LX CAB – ONE SLEEPER WHEELBASE: 3,600 MM Ibedpfxjz Sly De An Ioc AIR SUSPENSION (REAR) LIFT/LOWER VALVE ABS – EBS – ASR – ESC – AEBS – LANE DEPARTURE WARNING – HILL START ASSIST TIPMATIC AUTOMATIC GEARBOX, 12 SPEEDS ENGINE BRAKE DIFFERENTIAL LOCK 1 TANK AIR CONDITIONING NIGHT HEATER ELECTRIC WINDOWS AND MIRRORS ROOF SPOILER AND SIDE DEFLECTORS TIRES: 315/80 R 22.5 GVW: 7,232 KGS GVM: 19,000 KGS

Condition: used, maximum load weight: 25,750 kg, overall weight: 32,500 kg, axle configuration: 2 axles, first registration: 05/2001, loading space volume: 24 m³, Year of construction: 2001, Equipment: ABS, Schmitz Gotha SKI 18-7.2 steel tipper semi-trailer | approx. 24 m³ | SAF | lift axle VIN: W0921223210G22022 CHASSIS / COMPONENTS 2 × SAF axles * Air suspension * Lift axle * Raise and lower function * Disc brakes * ABS * 2-line compressed air connection * ABS electrical connection * JOST support legs * Front standing platform BODY Steel tipper * Steel tipper body * Tipping hydraulics * Volume: approx. 24 m³ TIRES Tires: 425/65 R22.5 160J * Axle 1: Remaining tread approx. 40% * Axle 2: Remaining tread approx. 30% WEIGHTS Permissible total weight: 32,500 kg * Unladen weight: 6,750 kg * Payload: 25,750 kg OTHER Isdpfoz Shklox An Iobc * Color: Grey * First registration: 15.05.2001 * MOT (periodic technical inspection): due * Emissions test: due New MOT/emissions test as well as weight adjustments (increase/decrease) are possible upon request. We won't leave you alone, even after the purchase: We will assist you in obtaining export or short-term registration plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to help! We speak German, English, and Russian. All information is without guarantee. Subject to changes, errors, printing and typographical errors, and prior sale. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability, and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for various purposes. For us, it's not just about the vehicle, but also the service behind it. Fairness, integrity, and customer satisfaction are our top priorities. Therefore, we will personally and reliably support you – from the first contact to the handover of your vehicle. Come and see for yourself. We look forward to your inquiry! Our services for you: Vehicle loading We will assist you in loading your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term registration plates We will assist you in obtaining export or short-term registration plates. Customs formalities We will also support you with customs matters. Vehicle transport Upon request, we will arrange for the transport of your vehicle within Germany.

Condition: used, mileage: 270,000 km, power: 368 kW (500.34 HP), first registration: 08/2018, fuel type: diesel, overall weight: 32,000 kg, gearing type: automatic, emission class: euro6, loading space volume: 18 m³, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), MAN TGS 35.500 First registration: km ENGINE COMPLETELY OVERHAULED – INVOICE AVAILABLE 8x6 Leaf/Leaf suspension Heavy-duty axles Wheelbase 2980 German vehicle Langendorf tipper body 18 cubic meters ---- Visit our website: deutsch/english/srpski/hrvatski/bosanski/bugarski… Goran deutsch/english/p?????/?????… Roman We will gladly assist you with financing or leasing. EU sales: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 € Our services for you: - Customs license plates Ibjdpfx Ajz S S Exjn Ijc - Export documents and EUR1 certificate - Worldwide transport - Accommodation - Transfer from Munich Airport or Passau train station

Condition: used, mileage: 270,000 km, power: 368 kW (500.34 HP), first registration: 08/2018, fuel type: diesel, overall weight: 32,000 kg, gearing type: automatic, emission class: euro6, loading space volume: 18 m³, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), MAN TGS 35.500 First registration: km ENGINE COMPLETELY OVERHAULED – INVOICE AVAILABLE 8x6 Leaf/Leaf suspension Heavy-duty axles Wheelbase 2980 German vehicle Langendorf tipper body 18 cubic meters ---- Visit our website: deutsch/english/srpski/hrvatski/bosanski/bugarski… Goran deutsch/english/p?????/?????… Roman We will gladly assist you with financing or leasing. EU sales: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 € Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation - Transfer from Munich Airport or Passau train station Iodpfxsz S S Ere An Iebc

Condition: used, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 05/2016, next inspection (TÜV): 08/2026, Equipment: ABS, * Electric sliding roof with remote control * 1st axle liftable * Semi-tipper body made of steel * SAF axles * Disc brakes * Wabco Trailer EBS-E ----* ?Tire dimension: 385/65R22.5 * Technical gross weight: 36,000 kg * Tare weight: * Overall length: * Next inspection due: / ----Vehicle number: 12607----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle TÜV/inspection acceptance Complete export processing Arrangement of financing Ibjdpfx Anez S S Ige Isc Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport----?YOUR VTS TEAM