Used Kudu Mit Nc-Steuerung for sale (11,149)

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation Njdpfx Ajfu Iwmeg Dowf It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco NC - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller Nwedeg Ntmhopfx Ag Djf - working position horizontal and vertical - NC control with touch screen - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: excellent (used), Year of construction: 2001, Tool milling machine Macmon M 100 NC Nodpfxex Hga Do Ag Dswf Infinitely variable speed control, Tool holder SK 40 Coolant device Operating manual

Condition: as good as new (ex-display), Year of construction: 2022, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... Njdpfxogqfmnj Ag Dewf BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Bending and straightening program via selector switch Demonstration machine year 2022 incl. hand and foot pedal Machine as good as new

Condition: as good as new (ex-display), The AHK M 1230 NC incl. AKAS – LC II M is a highly efficient press brake designed for sheet metal processing, offering a modern and cost-effective NC solution for bending tasks. This robust machine combines advanced technology with safety features, allowing for user-friendly operation without the need for CNC programming. Built from stress-relieved welded steel, the AHK M series provides a rigid frame and hydraulic system, which ensures precise upper beam positioning through a torsion shaft connected to the depth stops. Operators can easily manipulate the back gauge in the X- and R-axes via a touchscreen or access stored bending sequences for automatic operations. This model is ideal for producing workpieces with consistent materials and shapes, while its manual quick-action clamping system significantly reduces tool change times. Complimented by features such as an emergency stop switch and a reliable optical safety system, the AHK M 1230 NC press brake is engineered for high productivity and safety. For those looking for a superior press brake, request a quote today and enhance your sheet metal processing capabilities. Nwjdpfx Ajv Rbv Aog Djf

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Mannesmann Demag, control electronic modules from injection molding machine D 100-275 NC -Card holder: Murrelektronik 630055 Njdpjn Hbc Ijfx Ag Djwf -Control card: Philips 9404 780 020 -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control electronic modules from injection molding machine Demag D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 Nwjdpfjn Hbckjx Ag Def -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

Condition: new, Year of construction: 2023, Horizontal bending machine AH 20 with backgauge - ZOPF - with semi-automatic control - hydraulic pressure 20 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. Nwsdpfx Agowyt Tqj Dof - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 2,2 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x12 mm round tube up to 48 mm

Condition: new, Here we offer an IAI ultra compact SCARA robot with control unit. IAI ultra compact SCARA robot IX NNN3515-5 L-T2 Control XSEL-QX4-NNN3515-P1-EEE-2-2 Arm length: 350mm Useful load: 1 kg maximum 3 kg Weight: 18.2 kg Motor power: AXYIS 1 200W AXIS 2 100W. AXIS3 100W. AXIS4 50W Robot was stored! New in the sense of unused! Nwsdsdpiy Depfx Ag Dof Type: IX-NNN3515-5 L-T2 / XSEL-QX4-NNN3515-P1-EEE-2-2 Condition: new / new Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: excellent (used), Kuka Robot Here we offer you a Kuka robot. (as good as new/unused) Kuka Robot KR 60L30-3 arm length: 1220 mm axes number: 6 Weight 665kg Axis / Axis 1 (A1) ± 150˚ : 128˚/s Axis / Axis 2 (A2) +75˚/--105˚ : 102˚/s Axis / Axis 3 (A3) +158˚/--120˚ : 128˚/s Axis / Axis 4 (A4) ±350˚ : 260˚/s Axis / Axis 5 (A5) ±119˚ : 245˚/s Axis / Axis 6 (A6) ±350˚ : 322˚/s With sealed software Nwsdpfx Agepuhiie Djf Rated payload: 30kg Control system KRC4 Type: KR 60 L30-3 Scope of delivery: (See pictures) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), Here, we offer a FANUC Robot with control unit. Nsdpfx Agsd Hyius Dswf FANUC Robot M-420I A The M-420iA series is the latest generation of FANUC Robotics high speed family of industrial robots. The M-420iA is based on a simple and reliable design and offer a sophisticated motion control and consistent performance with high productivity. The series is supported by the Intelligent robot controller. The M-420iA is a four-axle, servo-powered, modular robots, which has been designed for packaging and material handling at high speed. M-420iA 4 axes of motion, 40 kg lifting capacity. Handheld programming device Large work area with a horizontal reach of 1855 mm Repeat accuracy of +/-0,5 mm at full speed and full payload within the whole working area. Linear motion speeds up to 4200 mm / s. Type: M-420I A A05B-1040-B201 / R-J3IB A05B-2474-B250 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: excellent (used), Stäubli Industrial Robot TX60 with CS8C-TX60 Controller – 6-Axis Robotic Arm For sale is a pre-owned Stäubli TX60 industrial robot, including the CS8C-TX60 control unit. The robot is ideally suited for precise handling, assembly, or inspection tasks in automation technology. Technical Data – Robotic Arm TX60 Axes: 6 Max. load capacity: 4.5 kg (up to 9 kg possible) Reach: 670 mm Repeatability: ± 0.02 mm Mounting: Floor, wall, or ceiling Protection rating: IP65 (optional IP67 at wrist) Nwsdpfx Aew El Hmog Djf Robot weight: approx. 51.4 kg CS8C-TX60 Controller Power supply: 1X230V-50/60Hz, 1700 VA, 120 kA Compact 19" controller with VAL3 control system Communication via Ethernet / RS232 / fieldbus (optional) Digital inputs/outputs and expansion options Protection rating: IP20 (optional IP54) Dimensions: approx. 331 × 445 × 455 mm Controller weight: 31 kg Scope of Delivery Stäubli TX60 robotic arm CS8C-TX60 controller Connection cables (robot–controller) Teach pendant, handheld programming device Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and details!) We are happy to answer any further questions by phone.

Condition: ready for operation (used), Brinkmann motor consisting of Siemens 1LE10011DA634FB4 - Z - three-phase motor SN: UD 1311/1580810-001-001,Z see nameplate + Brinkmann Pumps 6UMFR0AA-D05105 control SN: 90549LJP00002,used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nwodpfeldln Usx Ag Djf

Condition: ready for operation (used), Brinkmann motor consisting of Siemens 1LE10011DA434FB4 - Z - GP three-phase motor SN: UD 1312/1583831-001-002,Z see nameplate + Brinkmann Pumps 6UMFR1AA-D05104 control SN: 90549MFQ00001,used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nwsdpeldlpcefx Ag Dof

Condition: ready for operation (used), Lehmann NC dividing head with PL gear 420-112 rotary table Serial number: A4199 Material number new: 829070AR1 / Material number old: WM780647B,used, normal signs of wear, 100% functional, scope of delivery according to photos,ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Njdpfx Aet Sn Udog Dewf

Condition: new, Müller co-ax 5-PCS-2 15 NC valve with external drive 24V DC ,unused, 100% functional, scope of delivery according to photos Njdpfxei Eb Tdo Ag Dswf

Condition: new, müller co-ax 5-PCS-2 10 NC valve with external actuator 24V DC ,unused, 100% functional, scope of delivery according to photos Nwsdpfx Agji Eb Tao Dof

Condition: new, Year of construction: 2023, functionality: fully functional, Welding booth with robot, welding power source and controller for welding small workpieces Components as new, suitable for salvage (1) Crede Welding System (Unit price EUR 60,000) consisting of: - T13 Controller for controlling 2 welding stations - LT 5000A Power Unit - Cooling unit - 2x split seam welding heads SSK (2) Robot KUKA KR 20 R1810-2 (Unit price EUR 20,000) with: - Ethercat communication to external Beckhoff PLC - Diagnostics Safety 3.2 - SafeOperation 3.6 - GripperSpot Tech 5.0 Nedpfx Aevwz Huog Djwf

Condition: used, Candle Filter System – Automatic, 3 Filters 2x Filter housings 30" x 3 FBFM33 Nodpfx Agsxyt Eqo Djwf 1x Candle filter FBT013GNW25J 1x Sepex pump 1x Pump for injection of oenological product after filtration or reinjection of wine 1x Mounted on skid, fully equipped with fixed piping

Condition: refurbished (used), functionality: fully functional, -Very good condition -1. year operating time after revision Nwodpfxeuq A Age Ag Dsf -Digital analog control with RS232 interface. The recommended price is 6,000.00 EURO. The associated control unit is 800.00 EURO.

Condition: ready for operation (used), Stäubli TX90 industrial robot arm SN:F04/50Y0A1/A/01 with CS8 C complete control and operating panel,used, normal signs of wear, 100% functional, scope of delivery according to photos,ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nwedpfexah I Hjx Ag Def

Condition: used, Used YASKAWA industrial robot MH 50. Year of manufacture: 2010. With DX100 control unit. Nsdpfx Aoxhg S Hjg Dswf

Condition: used, Used YASKAWA industrial robot HP 20. In good condition. With NX100 controller. Nodpfx Aexhg S Tsg Dewf

Condition: as good as new (ex-display), Year of construction: 2023, Incl. control for entering the bending angle. Strokes per minute with 15 mm stroke 34 /min. Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Flat steel (2 inclinations) up to max. 350x10 mm Flat steel (5 inclination) up to max. 350x15 mm 90 degree angle steel up to max. 80x80x8 mm Bar steel up to max. 35 mm Square steel up to max. 30 mm Notching up to max. 10 mm Bending capacity: Fixture up to max. 100x10 mm Nwjdoxyyy Uopfx Ag Djf Motor power 3.0 kW Net weight 950 kg Gross weight 1150 kg

Condition: used, Table dimensions 2500x 780 mm Motor output 7,5 kW Nwjdpoxpi D Isfx Ag Djf Spindle diameter nach Bedarf mm reus 1.500 - 10.000 U/min