Used Ott-Jakob Is-40 - B1-1.0 Einbauspanner - ! - for sale (28,992)

Condition: new, OTT-JAKOB IS-40-B1-1.0 built-in clamp, unused in opened original packaging, 100% functional, delivery as per photos Bedsx Et Swspfx Aphjdf

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation chamber System Structure: The unit consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% RH, measured in supply air Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test chamber load; with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (WxDxH): approx. 2260 x 4648 x 2260 mm - External dimensions (WxDxH): approx. 2660 x 6460 x 2800 mm - Clear door passage test chamber door (WxH): 2260 x 2260 mm - Climate module KB 127 (WxDxH): 1700 x 800 x 1400 mm - Control cabinet (WxDxH): 800 x 500 x 2000 mm Design: - Airflow: Supply air via perforated plate at the rear wall, ceiling area; exhaust air via perforated plate at the rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior lining: Stainless steel - Exterior cladding: Galvanized, plastic-coated steel sheet - Floor: Stainless steel, floor load 15,000 N/m² - Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, externally coated with viewing window (WxH): 1000 x 1000 mm - Test area lighting: 4 spotlights, 500 W each Bedpfx Apezizk Hjhedf - Insulation: Dual-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc): EDB 40 Color scheme: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10%, 3/PE N, 50Hz - Rated power: 95 kW - Rated current: 150 A

Condition: good (used), geared motor, electric motor -Speed: 40/80 rpm -Power: 0.6/1.0 kW -Design: B5 -Shaft diameter: Ø 48 mm -Protection class: IP 44 Bedsd Al Hxjpfx Aphodf -Price: per piece -Quantity: 1 available -Dimensions: 655/250/H320 mm -Weight: 53.5 kg

Condition: good (used), geared motor, electric motor Bodpef D Tl Hsfx Aphjdf -Speed: 80/40 rpm -Power: 1.0/0.6 kW -Design: B5 -Shaft diameter: 48 x 110 mm -Brake: 23.3 Nm -Protection class: IP 44 -Price: per piece -Quantity: 2 pieces -Dimensions: 690/251/H320 mm -Weight: 55 kg

Condition: good (used), geared motor, electric motor -Handover: in its current condition as inspected -Brake: not working -Speed: 80/40 rpm -Power: 1.0/0.6 kW -Design: B5 -Shaft diameter: 48 x 110 mm -Protection class: IP 44 Bdodpfof D Tl Aex Aphof -Price: per piece -Quantity: 2 pieces -Dimensions: 690/251/H320 mm -Weight: 55 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders Bdedpfx Apsv N D Dyohsf -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 40 mm -Type: B1-32/14x40 TGL10906 -Piston rod: Ø 14 mm / M12 -Holes: Ø 20 mm -Dimensions: Ø 50 x 204 mm -Weight: 1.6 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 200 mm -Type: B1-40/18x200 /O TGL 10906 -Piston rod: Ø 18 mm / M16 -Hole diameter: 100 x 11 mm -Number: 1x cylinder available -Dimensions: 350/95/H95 mm -Weight: 4.2 kg Bdodpfx Apsv S U Dcshsf

Condition: new, neu Bdodjy Hf Rzjpfx Aphsf ca. 2 - 4 Wochen ab Auftr Deutschland 2792.28 € 10 mm B 16 220 mm 250 - 3000 U/min 0,45 kW 320 mm 520 mm 820 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Art. - No. 217.410 with intermediate table and table height adjustment via toothed rack OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 10999, DESCRIPTION Double-sided grinding machine / grinding machine top/bottom Manufacturer Löwer Type DSM 3000 with workpiece return Bthgq0Ygu0 Working width: 290 mm Grinding thickness: 2-200 mm Shortest workpiece length: approx. 320 mm Equipped with: 1x grinding unit from above, 7.5 kW 1x brushing unit from above, 0.37 kW Bodpjv Dfp Hefx Aphedf 1x grinding unit from below, 7.5 kW 1x brushing unit from below, 0.37 kW Grinding belt dimensions: 300 x 1800 mm Electric height adjustment, 0.37 kW Adjustable feed, 6/11/16 m/min. Compressed air: 6-8 bar Dimensions approx. 2700 x 1100 x 1900 mm Weight approx. 1600 kg

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Compact welding cell ABB Robotics IRB 1400 with manual rotary table and Fronius TPS 4000 welding machine. Overall dimensions: approximately 4000x2350mm Robot: ABB Robotics IRB 1400 Controller: S4-M98A Max. working radius: approximately 1450mm Payload: 5kg Year of manufacture: 1998 Bdedpfx Aozmq U Nsphjf Used – normal signs of wear and tear. Further details, article numbers and pictures available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city and postal code. Freight costs available upon request – please specify delivery address.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, ABB Robotics IRB 1400 S4C + M2000 robot with a rotary table and Fronius TPS 3200 welding machine, as well as a Fronius burner cleaner. Number of axes: 6 Max. payload: 5 kg Max. working range: 1450 mm Year of manufacture: 2003 Scope of supply: Robot, controller, cables, teach pendant, circuit diagrams Floppy disk drive for data backup, Fronius TPS 3200 pulse welding machine, rotary table, Fronius robot hose package. Used item – shows normal signs of wear, but is fully functional. Further details, article numbers and pictures available on request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city and postal code. Freight costs on request – please specify delivery address. Bodjzl Anxspfx Aphedf

Condition: ready for operation (used), Siemens 6FC5356-0BB14-0AA0 NCU 561.4, serial number: ST-V22037257. This item has been fully overhauled and comes with a 3-month warranty. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Bdjdpoi Ed Ebofx Aphsf

Condition: ready for operation (used), Bosch SD-B3.031.030-14.000, brushless servo motor, serial number: 964000616. Professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please inquire about the price separately! Bsdpei D E S Dofx Aphjdf

Condition: ready for operation (used), SEW WF10 CMP40M/BP/KY/AK0H/SB1 worm gear motor, serial number 01.1909224001.0001X13, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bdsdpfx Aey T Urujphsf

Condition: ready for operation (used), Bosch speedometer for SD-B 4.140.020-01.010 permanent magnet servo motor, used, in good condition, 100% functional, scope of delivery as per photos, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Bdjdpforlxrpex Aphjf

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 3x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32/40 mm Bodpfx Ajb A R R Dsphjdf -Dimensions: 150/100/H100 mm -Weight: 3 kg

Condition: good (used), Speed control unit, speed controller, controller, motor controller, motor control, motor control controller, motor controller Bdodpfx Ajxx R U Tophsf Manufacturer: Ott, Motor control motor controller -Type: K10024-02 -Motor control: M-BL-10-24 -Number: 2 controllers available Price: per piece -Voltage: 15VDC to 30VDC -Dimensions: 75/45/H105 mm -Weight: 0.2 kg/pc.

Condition: used, axle configuration: 3 axles, first registration: 12/2003, color: other, Year of construction: 2003, Empty weight: 6.500 kg Axle 1: left 10 mm right 16 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right10 mm Bedpfjx Elfisx Aphedf We have the possibility to stack trailers! 

Condition: new, SNFA SEB140 7CE3 DDM precision ball bearing, unused in original packaging, 100% functional, scope of delivery as per photos Bodpfoxah Hpsx Aphjdf

Condition: ready for operation (used), Veeder-Root TLS-350 4-Input Probe Thermistor Module 330724-001, used, normal signs of use, 100% functional, scope of delivery as per photos Bdsdpfxexaifgj Aphof

Condition: excellent (used), Weishaupt RGMS 40 dual-fuel burner for gas and heavy oil. 2700 kW. Bdedpomnqbtefx Aphof

Condition: new, Year of construction: 2026, Standard equipment: Bjdpelfdufofx Aphjdf - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1 = M30x3.5 / R2 = M24x3 / R3 = M36x4 Spindle MK IV Drilling depth: 160 mm Overhang: 300 mm Column diameter: 140 mm Usable table surface (W x D): 590 x 450 mm Speed display: digital Drilling depth display: digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with reduction gear) 0-4,000 rpm Optionally R1 or R2 without additional charge Additional charge for R3: € 2,250 Accessories drilling package 6 (€ 910.00) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: Free to your site including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, NEW – directly from the factory Drill depth and speed display – digital with backlight Thread-cutting capacity M30 (dependent on pitch) Optional: R1 spindle speeds with step-less pre-selection, speed range 100-2000 rpm Bdodpfx Ajd H Rhnophef Optional: R2 spindle speeds with step-less pre-selection, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drill depth 160 mm Overhang 300 mm Usable table surface (swiveling) 590 x 450 mm Manual feed Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor – three-phase, 400 V, pole-changing, 1.5/3.0 kW Weight 420 kg 3 years warranty FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Threading unit OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Maximum threading capacity - R1 M30x3.5 - R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Overhang (mm) 300 Column diameter (mm) 140 Bdjdpfsd Su Agex Aphjf Usable table surface (W x D) (mm) 590 x 450 Speed display, digital Drilling depth display, digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table (mm) 150-700 Machine dimensions without control panel (mm) 610 x 900 x 1,980 mm Machine dimensions with control panel (mm) 670 x 1,100 x 2,200 mm Motor, three-phase, 400V with frequency converter (kW) 4.0 Spindle speeds, infinitely variable R1 (1-stage) 0-1000 1/min R2 (1-stage) 0-1600 1/min Manual feed Weight (kg) 400 Optional drilling package 6 (€ 910.00 plus VAT) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) Delivery in Germany, free of charge, including packaging! NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: ready for operation (used), Year of construction: 2005, Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details. • Adhesive application: Hot/cold melt adhesive process; application roller with synchronous and counter-rotation • Edge thickness: 0.3–10 mm • Workpiece thickness: 8–60 mm • Workpiece width: minimum 70 mm • Workpiece length: minimum 150 mm • Operating pressure: 6 bar • Feed power: 3.0 kW • Feed speed: 14–20 m/min • Electrical connection: 3x 400 V, 50 Hz • Extraction requirement: 1x Ø180 mm at 20 m/s = 35 m³/min • Air speed (minimum): 20 m/s • Compressed air consumption: approx. 300 l/minProcessing units / equipment on the machine: • Joining: • 2 x 2.2 kW, n=14,600, 250 Hz; two application-controlled working spindles • Combi-melt gluing unit: • Top-mounted, changeable hopper for EVA, PUR hot melt adhesive or cleaning granulates; hopper volume 2.5 l • AKM (automatic edge magazine): • Automatic edge magazine with optical monitoring for strip edges in fixed lengths • Capping: • 2 x 0.8 kW, n=12,000, 200 Hz; automatic swivel 0°/5°; 2 HM saw blades Ø140 x 3.2 x 16, z=34 • Flush milling: • 2 x 0.7 kW, n=12,000, 200 Hz; single-sided probing; 2 carbide-tipped indexable knife heads HF70, Ø70 x 20 x 16, z=4 • Fine milling (bevel 15°/30°/45°): • 2 x 0.3 kW, n=12,000, 200 Hz; double-sided probing; 2 carbide indexable insert cutter heads HF70, Ø70 x 20 x 16, z=4 • AWSR (radius R2–R5): • 2 quick-change sets for fine milling cutter, 2 x 0.3 kW; 2 carbide indexable insert cutter heads AR73 x 16 x 16, z=3, R2–R5 • AKF (copy milling): • Automated copy milling with two separate working spindles for end faces and longitudinal radii; 2 x 0.37 kW, 12,000 rpm; tools R1–R3 • Scraper blade: • 2 x carbide scrapers, automatic feed • Surface scraper: • 2 x carbide scrapers, with fine adjustment device • PU set: Bsdpjyn I U Rjfx Aphedf • 5-way spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent), fine buffing device with cloth disc • Edge cleaning: • 2 x 0.2 kW, n=2,800, 50 Hz, oscillating brushes