Used Plantec Uk 600 Ha 90 Grad for sale (32,248)

Condition: new, Year of construction: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its easy operation and quick, convenient material changes. This model only allows for 90° cuts! The saw feed operates automatically at the press of a button, and material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard features include a minimum quantity lubrication system and an air spray gun for machine cleaning. This machine is equipped with connections for a chip extraction system. Additionally, it can be optionally fitted with a digital mitre angle display, a layout laser, and pneumatic lifting for the protective hood. Equipment: - Large support table, high-performance drive motor - Two-button control for initiating the sawing process (optional single-button control available) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydro-pneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved rearwards to increase cutting capacity - Large protective hood covers the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Adjustable saw blade feed speed - Air gun for machine cleaning - Saw blade diameter: 600 mm Work Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust lift speed 4. Bring clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button – the machine is ready for operation 7. Press and hold both SAW buttons to initiate cutting 8. After cycle completion, release SAW buttons and press the STOP button 9. Open the clamping fixture and remove or advance the material Hedpfxepa Nxdj Amgon For technical data such as cutting range, performance, etc., please refer to the data sheet in the email attachment. We look forward to your inquiry! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Hjdpjgcbwgsfx Amgjn

Condition: new, Year of construction: 2026, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm • Saw blade 600mm • Saw blade not included! Hedpsgwt S Eofx Amgon Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default Hodpfsidun Dox Amgjn this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine predominantly used for cutting profile materials made of aluminum cast, copper, and hard plastics (solid materials are possible to a limited extent). The machine stands out for its ease of use, rapid and convenient material change, and simple adjustment of mitre angles. The UK 352 HA features a steplessly adjustable mitre range from 45° left to 0° right. Saw feed is automatic at the push of a button, while material clamping is handled by two pneumatically operated vertical clamping cylinders. The machine comes standard with a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction unit are provided on this model. Equipment: • Precision under-table circular saw • Mitre adjustment: left 45º / 90º / right -45º degrees • Includes 2 pneumatic vices (vertical) • Steplessly adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction connection for chip extraction unit • Mist spray device for air-oil cooling Hedpfxjgwt Rre Amgsn • Air gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically positioned control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in delivery! You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us for an appointment. We look forward to your enquiry! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, The UK-400-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-400 A has an infinitely adjustable miter range left and right up to 20° (swivel range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed Hjdpfx Asgwt Rnsmgjn • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 130mm • Saw blade 400mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 125 mm Hedpfsgwt Rysx Amgen • Saw blade 350mm • Saw blade not included!

Condition: new, Year of construction: 2026, The UK 500 HA semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 500 HA has an infinitely adjustable miter range of up to 30° on the left and 0° on the right. The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) Hsdpfxjgwt R Dj Amgsn • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 180 mm • Saw blade 500mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 800 HA, semi-automatic The UK 800 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 800 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default Hedpfxeidun Is Amgon this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 800 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Hodpfx Amsgwt Rvjgen

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank We offer here a used post protection of the manufacturer Gemac for sale. The mullion protection is suitable for a frame profile width of max. 90 mm. Included in the scope of delivery: 01x post protection, used Material colour: cream white Design: V f. Upright profile width: approx. 90 mm Total height: approx. 600 mm total width: approx. 113 mm height of deflector: approx. 60 mm Material thickness: approx. 4 mm Hole Ø: approx. 8 mm Leg dimensions: approx. 85 x 85 mm Weight / piece: approx. 4.888 Kg Hedpjfdqkajfx Amgon 02x mounting plates, used Material colour: cream white Dimensions: 130 x 91 mm (WxD) Material thickness: approx. 7 mm 04x hexagon head screw: M10 x 35 mm 04x tooth nut: M10 04x washers: M10 Our services at a glance: (prices on request) Mounting, construction our general terms of assembly are to be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out in accordance with the Requirements of BGR 234 visual inspection for all rack systems Delivery with our own vehicle fleet (without unloading)

Condition: used, Band saw machine, double miter saw Hedpjy Urigjfx Amgjn The machine was used for cutting fiberglass bales. Additional charge: excludes machine loading!

Condition: used, Roller conveyors with chains pull 90° RA1846 Type: Transnorm 3300-600-550 Hodjk Abg Dspfx Amgon Length: FL = 3300 mm Conveyor width: FB = 550 mm Total width: 600 mm The chains off slide width: 700 mm height (BH): 140 mm Support roller pitch: 80 mm including pneumatic stopper Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1995, Transnorm angled infeed outfeed rejector inlet roller conveyor 45°/90°-600-500 RA2033 Year of manufacture: 1995 discharge angle: 45° + 45° curve Nominal/external width (NB): 600 mm Useful width (NUB): 500 mm Hodpera Emlofx Amgjn Conveyor speed: 0,68 m/s Roller diameter: 50 mm steel + conical plastic coated rollers Drive: SEW gear motor with brake Electrical data: 0,37 kW, 380-480 V center distance: 75 mm Height: 120 mm, 375 with motor Optionally available: Supports Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Roller conveyors with chains pull 90° RA1847 Hedpsk Abg Iofx Amgsn Type: Transnorm 9900-600-550 Length: FL = 9900 mm Conveyor width: FB = 550 mm Total width: 600 mm The chains off slide width: 700 mm height (BH): 140 mm Support roller pitch: 80 mm including pneumatic stopper Optionally available: Supports: Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Transnorm curved roller conveyor driven 90°-680-600 IR800 RA1242 Conveyor curves Make: Transnorm Type: TS 2712 Year of construction: 2005 Conveying speed V = 0.58 m/sec Conveyor angle: 90° Conveyor width: 600 mm Total width outside: 680 mm Inner radius: 800 mm Drive Center Role: slide stored with conical plastic molding Shipping weight: 130 kg on euro pallet Transportmasze: L x B x H = 1800 x 900 x 450 mm Optionally available supports side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Hjdpfek Aa N Hex Amgsn Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Transnorm Belt Curve Conveyor left GKF 90°-780-600 IR600 both sides transmission RA2019 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 780 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees Hsdpfxek Abufe Amgon support feet: optionally available Conveying speed (v m/s): Depending on the following band, please contact us Drive:no motor, both sides Transmission possible, two belts one Motor Scope of delivery: without supports Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1999, Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising) Incline: 191 mm / 90° = 764 mm / 360° Support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 1999 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Hsdpfxsk Abtpo Amgjn For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Transnorm curved belt conveyor left 90°-800-600-IR600 RA2169 Make: Transnorm Running direction: 90° left running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you plan and implement your projects. We look forward to hearing from you. Hodjq Awytspfx Amgjn With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Transnorm curved belt conveyor right 90°-800-600-IR600 RA2162 Make: Transnorm Running direction: 90° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Hjdpfx Amoq Uap Hjgen Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor left GKF 90°-600-400-IR1000 - NEW RA2307 Technical data: Frame width (NB): 600 mm Frame width with Bearing cover and motor: 850 mm belt width (GuB): 400 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 1000 mm Conveying angle: 90° degrees Conveying speed (v m/s): 1,0m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 / S1 Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Frequency converter for stepless speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Hjdpfx Amjuicgzegjn Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, roller curve right or left tight division 90°/190°-660-600 IR500 RA2314 Hedpfx Aeuxg U Djmgon Make: Running direction: 90° right running/ left running Roller width (RB): 600 mm conical, plastic coating Nominal/outer width (NB): 660 mm Center roller axle distance: 60mm, 3mm roller distance Inner radius (IR): 500 mm Overall height frame: 120 mm Height including motor: 400 mm Motor MOVI-Mot 3x300-500V 0,25kW 1400 u/min max Brake 220-240V Gear motor: SEW Conveyor speed: 0.6 m/s 2 90° curves can be screwed together to 180° Optionally available: Supports Sideguides Sideguides Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Transnorm Pneumatic Pusher 900-600-500 90° RA2092 Technical Specifications: External Dimensions of Mounting Frame: LxWxH=980x700x825 mm Maximum Product Width: 900 mm Maximum product height: 640 mm Maximum conveyor belt-frame width (NB): 600 mm Maximum conveyor belt-frame height (BH): 90 mm Support feet: available as an option Drive: Pneumatic cylinder Hedpfx Ajy R Hcgomgon Optionally available : Control system Prices net plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Year of construction: 2026, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Hsdpfx Ajkqz H Dsmgsn

Condition: new, Year of construction: 2026, Aluminum circular saw UK 352 P, manual The UK 352 P semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple miter angle adjustment. The UK 352 P has an infinitely adjustable miter range left up to 45° and right up to 0° The saw feed takes place automatically at the touch of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. Connections for a chip extraction system are available on this machine. equipment manual guiding of the saw blade Double miter 30° - 90° - 0°, large support plate, Hjdpfoidunvex Amgsn powerful drive motor Clear control panel Two vertical pneumatic clamping cylinders Fixed material positioning jaw, can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area minimum lubrication system Air gun to clean the machine Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) Bring the clamping cylinder up to 20 mm of material 4) Pneumatic clamping of the material 5) Press the start button to start the saw blade 6) the saw cut must be carried out manually with a hand lever 7) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.