Used Vapm-10Tn for sale (5)

Condition: new, load capacity: 10,000 kg, rotational speed (distance/time): 1,000 mm/min, Capacity: 10Tn Type: Self-aligning Minimum diameter: 320 mm Maximum diameter: 2.800 mm Wheel dimensions: 300 x 160 mm (Diameter x Width) Tedpfx Afeuf A Ahjweb Wheel coating: Polyurethane rubber Rotation speed (Min.-Max.): 100 - 1.000 mm/min. Motor power: 1,1 KW Inverter: Danfoss Electrical components: Schneider Included: 1 motor-driven + 1 idler Control unit with 6 meter extension pole and digital display with the speed of rotation.

Condition: excellent (used), turning diameter over cross slide: 1,100 mm, spindle bore: 102 mm, turning diameter: 1,600 mm, turning diameter over bed slide: 1,950 mm, center height in crank: 800 mm, Lathe Gurutzpe Super BT 800 x 2000 mm e.p,with dimension display,turning on bed 1580mm,on cross slide 1100mm,on the neckline 1950mm,length of the neckline in front of the chuck 620mm,shank hole 102mm,36 speeds 2,8-400rpm,motor 30cv,4-jaw independent chuck diameter 1400mm, bed width 800mm, tailstock shaft diameter 180mm, lathe with dimension display, max weight on lathe between points 10tns with one steady rest 12tns, estimated weight of lathe and tooling 14450kg. Tjdpsq R Rknefx Afweb

Condition: excellent (used), Year of construction: 1980, Gurutzpe Super BT lathe 700 x 6000 mm e.p, turning over bed 1380mm, over cross slide 1045mm, over neck 1770mm, neck length before plate 620mm, diameter of the spindle bore 102 mm , speeds 2.8-400rpm, 40cv motor, plate of 4 independent jaws with a diameter of 1200mm, with a fixed steady rest and a mobile one, bed width 800 mm, diameter of the tailstock axis 140mm, max weight on lathes between points 10tns with a steady rest 12tns, estimated weight of the lathe 17600kg, pre-owned lathe electrical panel in very good condition condition Tedpfx Aoiqyv Ijfwob

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Todpfxezizrks Afweb Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Condition: good (used), functionality: fully functional, machine/vehicle number: 24732, Ficep 1105 punching machine, 110tns, multifunction machine, punching 30 x 25, shear 510 x 16mm, 400 x 19mm, 300 x 22mm, 200 x 25mm, 90º angle cutting 150 x 150x16mm, 45º angle cutting 100 x 10 mm, round and square cut 50mm, punching max diameter 32 thickness 26mm, with several working elements, with electric stop, with different accessories, in good condition Tjdpfx Afotvfcmswsb