Used Zikun Zk-Ad2-B1B1-Tf2Fl for sale (378)

Condition: used, maximum load weight: 13,330 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, loading space length: 6,150 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, Year of construction: 2026, Equipment: ABS, - 2 steerable axle sets ECO/low-maintenance with disc brakes, each with a load capacity of 9,000 kg - Dual-circuit EBS pneumatic braking system according to EC guidelines, with ALB control and parking brake as a spring-loaded accumulator, automatic linkage adjusters. Duomatic brake connection - Air suspension with raising and lowering function - Chassis: Stable welded construction made of high-strength fine-grained steel sheets, formed and welded to prevent twisting. The longitudinal and transverse beams form a single plane with the main frame. - Tires: 4 x 385/55 R22.5 on steel rims Dcedpfx Aezp Ak Ujcmsk - Fixed drawbar with DIN towing eye 40 mm (length-adjustable drawbar) - Electrical system: According to StVZO guidelines, in a protected installation, 5-chamber tail lights integrated into the underrun protection, Euro plug, 15-pin socket, 2 red position lights above the rear portal. ABS with connection cable. 1 marker light mounted on each side of the rear frame. - Floor: Made of 24 mm thick vehicle construction panels, film-coated underneath to prevent moisture penetration, with a non-slip screen-printed texture on top, laid flat and sealed around the edges. - Front wall: Made of special vehicle construction plastic panels, closed up to the roof, with a central strut laid flat. Without a front wall cover at the top front. - Side walls: ZIKUN flap swivel mechanism, continuous sideboard, horizontally divided. By folding down the lower sideboard, the upper wall is mechanically swung onto the roof. The lever kinematics, supported by a spring pull, is attached to the front wall. Sideboard upper parts made of special aluminum composite panels, 25 mm. - Fixed roof consisting of steel stringers with permanently glued aluminum sheets, powder-coated in white RAL9010 on the outside - Steel impact rail welded on both sides as a forklift protection. Rubber impact buffer mounted at the rear under the rear door - PVC quarter fenders on the axles - 1 set of mud flaps for the fenders - 2 wheel chocks with holder - Lateral underrun protection, galvanized and foldable brackets, aluminum planks with rounded end pieces - Continuous splash guard under the underrun protection at the rear - Complete body sandblasted, primed and painted in a single color - Chassis: MAN graphite black - Outer frame and body: RAL 9010 pure white - Inspection 60001-0002 TÜV approval trailer/semi-trailer - Drawbar fork length-adjustable - Central lubrication strip for slewing ring and drawbar - 2-leaf rear door made of aluminum sandwich panels with internal rotating bar locks. The doors have a smooth surface - Clad the front wall in the lower area with a 280 mm high aluminum profile as impact protection. - 2 x retractable access steps in the lower part of the folding wall on the left and right, approx. 600 mm long - Integrated cargo securing system with CRS system (4 rows) in the roof and floor, including 4 load securing bars with 6 horizontal spring telescopic rods (CRS system Ancra-Jungfalk, Dekra tested according to VDI 2700 Code XL) - Interior light as an LED spotlight, switched via parking lights, with a separate switch - Additional interior lighting as an LED spotlight mounted at the rear - 2 x pallet stopper on the left and right - Tire pressure monitoring system according to ECE R 141 - Additional camera on the trailer for rear view video system, camera at the rear above the rear door

Condition: new, power: 355 kW (482.67 HP), fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Options: * Climate package * Chassis front: base plate * Fixed cab entry * Rear view camera * Door handle and trim: Black, side trim: cab color * LED daytime running lights * Air-suspended cab * High-roof sleeper cab * Laminated glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windshield with sun protection film * Headlights with height adjustment * LED skylights * DAF Corner View * LED headlights, cornering and fog lights * Chassis color: anthracite gray * Color of headlight trim: Crystal White * Color of bumper: Crystal White * Lower step, cab: Crystal White * Steering wheel with silver accents * Interior trim color: Luxury * Center storage compartment * LED interior lighting * Auxiliary heater with waste heat pump and timer * Sunroof with electric operation * Auxiliary air conditioning, integrated * Driver's seat: Luxury Air * Passenger seat: Cinema seat and table, fabric upholstery * Xtra Comfort mattress for lower bunk * Upper bunk * Automatic cab climate control * Safety net on both bunks * Curtains with partition curtain * Refrigerator and drawer * Armrests on both sides of the driver's seat * Accessory power supply: Standard + 2x 40 A * ECAS remote control with extended functions * Adaptive cruise control with FCW and AEBS-3 * Driver Performance Assistant * Wireless charger * Digital tachograph, VDO 1C, version G2V2 * DAF Infotainment, Exclusive preparation, Luxury speakers * Antennas: DAB preparation, radio, 2x mobile, GNSS extra: CB * Lane change warning system * Hill start assist * DAF Side and Turn Assist * Electronic stability program (VSC) * Speed limit recognition * DAF Drowsiness Detection * Compliant with UN regulations R155 and R156 * Alcohol interlock, prepared * Rear view warning system * Rear axle load capacity: 13.00 t * Load limiter: 11.5 t * Manual operation of lifting mechanism * Lifting mechanism * Rear: 20.00 t, air suspension, SR1344 * Front axle 1, 8.000 kg, load capacity index 156 * Rear axle 1, 11600 kg, load capacity index 145 * Rear axle 2, 7500 kg, load capacity index 154 * Front: 8.00 t, air suspension, 161 N * Tire pressure monitoring system * Steel disc wheels, silver-gray * F1, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA * R2, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * Emission class Euro 6 * Eco-Fuel * Idle shutdown, 5 minutes * Automated transmission, TraXon, 12 gears * Traction control system (ASR) * Urge-to-move * Rear axle ratio: 2.38 * Mechanical differential lock * 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 * MX-13 engine, 355kW/483PS, cab emblem: 480 * Compressor 2 cylinders without clutch * Drive rear axle with disc brakes * Pneumatic control for parking brake * ZF Intarder * Front underrun protection * Wheelbase 4.80 m / rear overhang 2.70 m * Rear lights with LEDs * EAS unit right, hor. battery box + 75-l-air tank left * Longitudinal member 310/7.0 mm, with inner reinforcement front/rear * 620-l aluminum fuel tank left, height 620 mm Dcsdpfx Asx Dptlecmok * Use with drawbar, nameplate, up to max. GVW * Pneumatic connection for trailer, swivel coupling * Cross member D137 + ringfeder coupling D137 * Electrical connection for trailer, 24 V/15-pole * Side marker lights * Battery energy monitoring * Generator 150 A, batteries 2 x 210 Ah AGM * Plus warranty, powertrain, 3 years / 300,000 km First registration date: December 17, 2025 Body: ZIKUN Swing Bo

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 700 kg, warranty duration: 12 months, Precision & stability through robust construction. The static, dynamic, and rigid mechanical design ensures long-term operational stability with high performance. Linear glass scales in X, Y, and Z axes enable precise position detection and minimize measurement errors. Compact & rigid mechanical concept. The short C-frame design, combined with generously dimensioned cast components, guarantees mechanical stability and precision throughout the machine’s entire service life. Its high level of robustness absorbs all machining forces, ensuring a consistently accurate spark gap between workpiece and electrode. Key features at a glance: - Manual eroding with jog function via hand control and joystick functionality - High vibration damping due to sturdy cast construction - Maximum removal rates and accuracy for all material pairings - Low-wear final dimension tuning - Fully encapsulated, integrated measuring systems - Fully integrated work area lighting - Automatic centralized lubrication Technical data: - Height: approx. 2400 mm - Width: approx. 2410 mm - Depth: approx. 2270 mm - Weight without fluids: approx. 2800 kg - Table (L x W): 700 x 400 mm Djdpfjyh Nf Uex Acmeck - Dielectric above table: 350 mm - Dielectric filters: 3 cartridge filters - Max. workpiece weight: 700 kg - Travel range X-Y: 400 x 300 mm - Travel range Z: 350 mm - Resolution X-Y-Z: 0.001 mm - Max. electrode weight: 50 kg - Dielectric capacity: 450 l - Required cooling capacity: 4.5 kW - Air flow rate: 10 l/min - Required air pressure: min. 6 bar - Electrode changer: 4-position

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing. Dsdpfx Acjy A H Umjmjck

Condition: used, Year of construction: 2000, Diesinking / EDM Dcjdpfovtfn Usx Acmek Travel distance X: 825 mm Travel distance Y :680 mm Travel distance Z: 405 mm table size X: 1200 mm table size Y: 850 mm max. workpiece weight: 3000 kg electrode changer: 50 - time Generator POCON 60 Quill holder: EROWA heavy duty adapter O module halogen light

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Boehringer-Sturm- Variator-gear-box model D 57 ZK Djdjw D T Sbopfx Acmjck Input speed: 1.500/min. Output speed: 0 - 1.320/min.

Year of construction: 1991, condition: used, max. wheel diameter 0 mm max. number of teeth 0 max. module min. module total power requirement kW weight of the machine ca. t dimensions of the machine ca. m CNC controlled milling machine for synchronous rings Dodpfxot Hwv Hj Acmock

Year of construction: 1975, condition: used, max. wheel diameter 280 mm Dcsdet Hw Dkjpfx Acmok max. number of teeth 100 max. module 6 min. module 1 total power requirement 6 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2015, number of axes: 4, Two Wire EDM machines manufactured in 2015 and 2019. These 4 axis ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) features a travel distance of 400 x 350 x 350 mm and a table size of 575 x 500 mm, accommodating workpieces up to 700 kg. Includes a controlled C axis and rotary spindle, along with a CO/2 Kraft & Bauer fire extinguishing system. Consider the opportunity to buy this ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) wire EDM machine. Contact us for further details. Dedpfx Acsyip Arsmsck • 1x ZK Genius 700 (2015) — 22,056 hours • 1x ZK Genius 700 (2019) — 8,255 hours • Table size: 575 x 500 mm • Max workpiece weight: 700 kg • Generator power: 96 A • Controlled C-axis and rotary spindle • C module (for carbide, PCD, or dressing) • O module (for very fine surface roughness) Additional equipment • CO/2 Kraft & Bauer fire extinguishing system • Extraction device • CIMCO Editor for path erosion • 1x Chameleon Quad (2015) automation: • 176 electrode slots • 9 UPC pallet slots with loading drawer • Double rotary gripper for Erowa ITS • Single gripper for UPC pallets

Condition: used, axle configuration: 2 axles, Year of construction: 2008, Carrying capacity: 22.000 kg VAT/margin: VAT qualifying Dodpfjzbl Axox Acmsck

Condition: new, Year of construction: 2026, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Working capacity Ø 120x120 mm, No. of belt stations (Z) 1, No. of brush stations (K) 1, Sanding belt, dimensions 120x1850 mm, Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, feed motor 0.25 kW, Total power 4.75 kW, Power consumption 12A, Dodpfx Acst D D Nzemock Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg

Condition: used, Year of construction: 1999, GUK ZK-500 Mobile Knife Unit The GUK ZK-500 is a mobile knife unit known for its versatility and compact design. Thanks to its mobility, the ZK-500 can be easily integrated into existing production lines and offers reliable performance. Key Features - Mobility: The ZK-500 is specifically designed for cross folding and can be flexibly used in various production environments - Compact Design: Space-saving design that integrates easily into existing production lines Dcjdpfx Acew Eu U Hemok - Reliability: With its robust construction and electronic control, the ZK-500 is particularly reliable and low-maintenance Specifications - Format: Maximum 480 mm x 310 mm; Minimum 160 mm x 70 mm - Nominal Voltage: 230V - Nominal Power Consumption: 0.45 kW - Nominal Current: 5.0 A All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: new, FC120 ZK flat finishing machines were developed thinking in simplicity of operation whenever flat bars, rectangular tubes or flat elements need to be belt finished or polished. These machine enable the work up to 120 mm width with a range of 3 possible combinations of belt heads and brushes. FC120 ZK combines the abrasive belt head (Z) with an abrasive brush (K). Abrasive belt head: Finishing and removing imperfections of square of rectangular tubes, flat bars or any flat component. Abrasive brush head: Smooth finishing after belt grinding operation with non-woven brush. Square or rectangular tube finishing: High quality of surface finishing on stainless steel tubes, tube after tube - also flat bars finishing. Quick abrasive belt replacement: Tool-free abrasive belt replacement. Fast and easy belt change in few seconds. NS Máquinas can supply different conveyor solutions in order to grind small items. Technical Details - FC120 ZK Working capacity (Ø mm) 120x120 No. belt stations (Z) 1-2 No. brush stations (K) 0-1 Dodpfx Aced Ix I Aemjck Abrasive belt dimensions (mm) 120x1850 Abrasive brush dimensions (mm) 120xØ200 Abrasive belt speed (m/s) 20 Abrasive brush speed (m/s) 15 Feeding speed (m/m) 12 Abrasive belts motor per head (kW) 3 Abrasive brush motor per head (kW) 2.2 Feeding motor (kW) 0.25 Total power (kW) 5.5 (ZK) Consumption (A) 12 (ZK) Dust extraction connection per head (Ømm) 80 Dimensions (mm) 1450x800x1800 (ZK) Weight (kg) 500 (ZK)

Year of construction: 2019, condition: ready for operation (used), An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documentation available. On-site inspection is possible. Dcodpewdwztofx Acmek

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 20369, table width: 400 mm, table length: 570 mm, controller model: POCON 60, empty load weight: 6,000 kg, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Bidding obligates you to collect the item on time between December 1, 2025, and December 5, 2025! TECHNICAL DETAILS Table width: 400 mm Table length: 570 mm Magnet dimensions: 260 x 150 mm Control unit: POCON 60 MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Connection: 5 kVA Dimensions & Weight Dimensions: 3,500 x 3,000 x 2,600 mm Weight: 6,000 kg EQUIPMENT - 4 T-slots - Clamping system Dodpfx Acjxm Sf Nsmjck - Magnetic clamping plate - ZIMMER + KREIM electrode changer system - Electrode holder - 50-position electrode changer - Storage system with various clamping plates - 2 tool trolleys with suitable electrodes and clamping systems

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Dcjdpfxsw R Rane Acmjk Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint, RAL 7035 light grey

Condition: good (used), Tecna Saima D2 pasta sheeting machine with built in mixer. Produces 300mm pasta sheet. Djdpfon Utypox Acmsck

Condition: excellent (used), mileage: 372,000 km, power: 294 kW (399.73 HP), first registration: 12/2015, fuel type: diesel, axle configuration: 6x6, wheelbase: 5,300 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, number of seats: 2, total length: 8,500 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2015, Equipment: ABS, air conditioning, crane, cruise control, electric window regulation, fog lights, parking air conditioner, power assisted steering, trailer coupling, = Additional Options and Accessories = - 2-pedal control - All-wheel drive - Leaf spring suspension - Refrigerator - Radio/CD player - Rotating beacon - Rearview camera - Sun visor - Tool box - Xenon headlights - Central lubrication system - Tow hitch = Notes = 6x6 Euro 6 Leaf spring suspension Hyva two-sided tipper with Boardmatic Hydraulic cover flap Crane: Hyva 1643 Z2 2 hydraulic extensions High-position control TÜV (German technical inspection) valid until 17.12.2026 In good condition! Ready for immediate use = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Transmission Transmission: ZF, 12 gears, automatic Axle Configuration Suspension: Leaf spring suspension Maximum front axle load: 9000 kg Rear axle 1: Max. axle load: 9500 kg; Reduction: External planetary axles Rear axle 2: Max. axle load: 9500 kg; Reduction: External planetary axles Weights Unladen weight: 17,760 kg Payload: 10,240 kg GVWR: 28,000 kg Dcedpeztcr Hsfx Acmsk Functional Crane: HMF 1643 Z2, year of manufacture 2015, behind the cab Body manufacturer: Hyva, 2-sided tipper with Boardmatic Tipper: Left / Rear Maintenance, History and Condition APK (Technical Inspection): inspected until 12/2026 Technical condition: very good Optical condition: very good Identification License plate: 96-BGR-2

Condition: excellent (used), mileage: 402,383 km, power: 210 kW (285.52 HP), first registration: 04/2017, fuel type: diesel, tire size: 265/70 R 19.5, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,550 mm, total width: 2,550 mm, permissible axle load (axle 1): 5,000 kg, permissible axle load (axle 2): 9,440 kg, Year of construction: 2017, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, power mirror, soot filter, spoiler, tail-lift, traction control, trailer coupling, = Additional Options and Accessories = Dedezr Ni Aspfx Acmsck - Outside thermometer - Heated mirrors - Passenger seat - Leaf spring suspension - Sunroof - Roof spoiler - Differential lock - Digital tachograph - Rear doors - Air conditioning - Air suspension - Air-suspended seats - Particle filter - Radio/CD player - Rearview camera - Side door - Sun visor - Lane keeping assist - Stability control - Tow hitch = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 7,698 cc Axle Configuration Tire size: 265/70 R 19.5 Brakes: Disc brakes Front axle: Max. axle load: 5000 kg; Steered; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle: Dual tires; Differential lock; Max. axle load: 9440 kg; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 7,405 kg Payload: 6,595 kg GVW: 14,000 kg Functional Tail lift: DHOLLANDIA DHLM.20, tailgate, 1500 kg Body manufacturer: SPIER Condition Technical condition: very good Optical condition: very good Identification License plate: 83-BJK-7

Condition: used, mileage: 203,395 km, power: 290 kW (394.29 HP), first registration: 07/2021, fuel type: diesel, empty load weight: 10,240 kg, maximum load weight: 7,760 kg, overall weight: 18,000 kg, tire size: 385/65 22,5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,900 mm, next inspection (TÜV): 05/2027, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, operating hours: 203,395 h, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, number of beds: 1, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, onboard computer, parking heater, sliding door, trailer coupling, truck registration, Vehicle number for inquiries: 41630 Mercedes-Benz, Arocs * Year of manufacture: 2021 * ABS, Anti-lock Braking System * Trailer coupling * EBS, electronic brake system * Power windows * Cab * Automatic climate control * Air suspension * Retarder / ZF-Intarder * Power steering * Sleeper cab * Heated seats * Auxiliary heater * Cruise control * On-board computer * Differential lock * Short-haul transport > 7.5 tons Dedpfezr T Ntjx Acmjck * Digital tachograph * Radio CD * Bluetooth * USB interface * OBU preparation * Electric windows and mirrors * AdBlue tank * Fog lights * Comfort suspension seat * Multifunction steering wheel * Sun visor * Collision warning system * Hydraulic suspension support * Remote control * Inspections: MOT / Emissions test valid until 05.2027 * Transmission type: Automatic * Suspension: Leaf spring / Air * Gross vehicle weight: 18,000 kg * Tare weight: 10,240 kg * Payload: 7,760 kg * Permissible gross vehicle weight: 18,000 kg * Tire condition, 1st axle: 70% -- 70% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 30% | 30% -- 30% | 30% - Tire size: 385/65 R22.5 * Wheelbase: 3900 mm * Tire sizes: 385/65 R22.5 Disclaimer: Subject to changes, prior sale and errors excepted. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Processing of all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists; we will be happy to advise you.

Condition: used, mileage: 3,000 km, power: 135 kW (183.55 HP), first registration: 11/2024, fuel type: electric, axle configuration: 1 axle, brakes: other, color: black, driver cabin: other, gearing type: other, suspension: other, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, sliding door, traction control, ON-BOARD COMPUTER, gear selector lever grip in leather, steering column (steering wheel) height and reach adjustable, sliding door for the cargo/passenger compartment on the right, central locking with remote control, audio system: radio with USB and Bluetooth hands-free function, Audio System 13: digital radio reception (DAB/DAB+), audio system: radio with 12-inch multifunction display, electric parking brake, speed limiter system 130 km/h, audio navigation system, windscreen wipers with rain sensor, cruise control system (cruise control), heated windscreen, tire repair kit, tire pressure monitoring system, Power KeyFree start function, ConstructionTimeMapping, anti-lock braking system (ABS), fog lights, electrically adjustable and heated exterior mirrors, front and rear parking sensors, electric windows, metallic paint, driver's seat armrest, steel rims 6.5x16, cornering light in the headlight, overhead storage compartment in the driver's cab, increased front axle load to 1.85 t, trailer stability program (TSA), electrically folding exterior mirrors, hill-start assist, turn signal in exterior mirror, brake assist, docking station (MyFord Dock), entry lights, electronic brake-force distribution (EBD), electric motor 135 kW, electronic stability program, electronic traction control, driver's seat (4-way adjustable) - double front passenger seat incl. seat heating, fabric, driver's seat with lumbar support, FordPass Connect incl. eCall, 180 degree rear wing doors, heating with recirculation switch, body/construction: high-roof panel van, automatic climate control, radiator grille with chrome trim, LED cargo area lighting, leather steering wheel, medium-height roof, My Key - programmable second key, digital radio reception (DAB+), radio remote control on the steering wheel, radio pre-wiring - 4 speakers, wheelbase 3750 mm, rearview camera with color display, headlight assistant with day/night sensor, rear mud flaps, front mud flaps, crosswind assist, lane departure warning, lane departure warning with driver fat ... Changes, prior sale and errors excepted. Dodpfoyk Rmbex Acmsck

Condition: excellent (used), Year of construction: 2020, operating hours: 1,470 h, functionality: fully functional, fuel type: electric, color: grey, CLEANsweep CS 5110 EH / Stolzenberg Twin Top TT 1100 / E – Ride-on sweeper-vacuum cleaner CLEANsweep CS 5110 EH / Stolzenberg Twin Top TT 1100 / E – Year of manufacture 2020 | approx. 1,470 operating hours | Gel batteries | new side and main sweeping rollers | new drive chains | high-dumping system | adjustable speed of side brushes | solid rubber tires | incl. charger | sweeping width 1100 mm | Tandem roller system TWS | 4.5 h runtime | 1320 W drive Technical data: Manufacturer: CLEANsweep Model: CS 5110 EH Condition: very good Year of manufacture: 2020 Operating hours: approx. 1,470 h Sweeping roller width: 700 mm Total sweeping width: 1100 mm Tandem roller system: TWS Turning radius: 1.2 m Drive: forward & reverse / differential rear-wheel drive Dirt container: 90 L Filter cleaning: electric Cleaning area: up to 12,000 m² Sweeping performance: 6,600 m²/h Climbing ability: 20 % Runtime: 4.5 h Drive: 1320 W / 4x 6 V 180 Ah battery Charger: included Dust extraction: 900 m³/h Material: impact-resistant PE plastic Equipment: Gel batteries, new side and main sweeping rollers, new drive chains | high-dumping system | adjustable speed of side brushes | solid rubber tires | incl. charger Highlights & Equipment: - Professional sweeper-vacuum cleaner – ready for immediate use - Gel batteries, new side and main sweeping rollers, new drive chains, high-dumping system, adjustable speed of side brushes, solid rubber tires - Tandem roller system (TWS) – excellent cleaning performance, even with fine dust & sand - Working width 1100 mm – high area performance up to 6,600 m²/h - Electric filter cleaning – consistently high suction power - Robust PE housing – impact-resistant & durable - Ideal for indoor & outdoor use – versatile - Very well-maintained condition – immediately available Areas of application: ✓ Industrial halls & storage areas ✓ Car parks & underground garages ✓ Workshops & manufacturing ✓ Outdoor cleaning of areas & paths Dcedpfx Acezrzgmjmjk ✓ Agriculture & municipal services Location: Warehouse D-46514 Schermbeck (NRW) – inspection & collection possible Delivery: throughout Germany & internationally on request Price: ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Other models available! ➡️ New & used machines, accessories & spare parts Buy CLEANsweep CS 5110 EH | Electric ride-on sweeper | Used sweeper-vacuum cleaner | Industrial sweeper | Ride-on sweeper for indoor & outdoor use | Battery-powered sweeper | Stolzenberg Twin Top | Sweeper-vacuum cleaner for warehouses | Cleaning machine 1100 mm | Ride-on sweeper with high-dumping system | Electric industrial sweeper Your reliable partner for cleaning technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure immediately available machines! If required, we will gladly arrange a virtual inspection of the machine via video call.

Condition: used, empty load weight: 6,890 kg, maximum load weight: 5,110 kg, overall weight: 12,000 kg, axle configuration: 2 axles, first registration: 10/2005, loading space length: 7,500 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, loading space volume: 40 m³, total height: 92,000 mm, suspension: air, color: white, Year of construction: 2005, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, tail-lift, * German trailer * First owner * Condition: see photos * 2-axle Schmitz tandem trailer, type ZK018 * Body: Refrigerated box with CARRIER underfloor refrigeration unit, type SUPRA 950U * Deep-freeze unit with a cooling capacity from 0°C to -20°C * Standby and on-the-road cooling via diesel and electric drive * Loading area dimensions: Length 7,500 mm x Width 2,450 mm x Height 2,200 mm * Front roller shutter door for drive-through loading * Multiple anchor rails on the right, left, and top * Rear roller shutter door * Loading platform BÄR, type BC 1500S Dsdpfx Ajzrnpzecmock * Load capacity 1,500 kg * 3 support legs * Schmitz axles * Air suspension * ABS + EBS * Storage compartments * Gross vehicle weight (GVW) 12,000 kg * Unladen weight 6,890 kg * Payload 5,110 kg * Load volume 40 m³ If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV (German Social Accident Insurance) inspection, a new SP (safety report), or a new UVV (accident prevention regulations) inspection. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer an inspection and examination of the goods so that the buyer does not have any false ideas about the condition and suitability. Inspections and examinations are possible and expressly desired at any time after making an appointment. All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale and errors.

Condition: used, empty load weight: 4,880 kg, maximum load weight: 5,620 kg, overall weight: 10,500 kg, axle configuration: 1 axle, first registration: 01/2019, loading space length: 7,450 mm, loading space width: 2,490 mm, loading space height: 3,100 mm, loading space volume: 57 m³, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Dautel DL1500 S tail lift, load capacity 1,500 kg, with own batteries, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dcjdpfeztd U Nex Acmek

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 7,490 kg, color: violet, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, FUSO CANTER 7C18, latest generation, with Jotha CombiCon 5518 demountable tipper body * 3.0L turbocharged diesel engine, 129 kW / 175 hp, EURO 6 * 5-speed manual transmission * Wheelbase 3400mm * Rear axle with twin tires and automatic differential lock * Traction tires 205/75 R16C * 4-wheel disc brakes * Electronic Stability Program (ESP) * ABS with electronic brake force distribution 3-year warranty on the base vehicle from the date of initial registration or up to 100,000 km. Optional warranty extension up to 5 years or 200,000 km available for an additional fee. Comfort cab with the following equipment: * Electric windows * Electrically adjustable and heated mirrors * Central locking with remote control * Immobilizer * Adjustable steering wheel and steering column * Tachograph with digital technology * Driver's log with EC control unit * Storage compartment above the windshield & behind the seat * Double passenger seat * Driver airbag * Lane keeping assist * Emergency braking assist * Turning assist * Driver's suspension seat with armrest * Headrests * Lockable glove compartment * Fog lights with automatic daytime running lights * Tilting cab * Automatic climate control * Double DIN radio with Apple CarPlay and rear view camera * Canter safety package * Sun visor * Steering wheel with control unit * Body: Jotha CombiCon 5518 * For demountable containers with a capacity of 2 to 10 m³ according to DIN 30720, as well as Jotha flat-bed containers. * Lifting capacity up to 5500kg * Optional remote control Dcedpfx Aozr S Arjcmsk * Telescopic arms individually controllable * Lifting stroke 1000mm * Loading area width between the lifting arms 2025mm * Hydraulic support on the right/left * Hydraulic safety hook * Adjustable lateral and front container stops * Chains with safety locking hooks and chain shortener * Other cab variants, wheelbases, bodies, and hydraulic systems for snowplows and spreaders in stock or available for short-term delivery. Please inquire! More vehicles of the Fuso Canter and Multicar brands can be found at: Leasing / Financing / Rental / Trade-in of your used vehicle. * ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors. * Our general terms and conditions apply.