Used 2022 Friulair S.max40 Ac for sale (12,362)

Condition: used, Year of construction: 2022, This used Partenair S.MAX40/AC refrigerated compressed air dryer, built in July 2022 by Friulair, handles a nominal flow of 366 m³/h. It runs on single-phase 230 V, 50 Hz, draws 0.82 kW and uses R407C refrigerant. Maximum working pressure is 14 bar. The DMC 35 controller shows the dew point on an LED bar. A one-piece aluminium heat exchanger and an electronic condensate drain complete the unit. Dimensions: 555 x 580 x 885 mm, weight 54 kg. Applications This second-hand air dryer removes moisture from compressed air downstream of a screw or piston compressor of about 40 hp. It protects pneumatic tools, cylinders, valves and air networks in mechanical workshops, sheet metal shops, woodworking, packaging and paint lines (food processing with suitable filtration). Key features / Advantages Kodpoz H Nqmjfx Ahijnc Proportional capacity control keeps the dew point stable at any load. Pressure drop is low, below 150 mbar on average according to the manufacturer. The compact, light unit connects in 1.5 inch BSP and plugs into a single-phase supply. Friulair is a well-known Italian dryer manufacturer, sold in France under the Partenair brand. The 2022 build year and clean appearance make resale and installation easy. Used refrigerated air dryer for sale at All Metal, specialist in used industrial machinery. Weight: 54kg Height: 885mm Length: 580mm

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Ksdpfx Aozp E T Sohienc Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Year of construction: 2020, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Magni Rotating and Extendable Work Platform for Roof Work / 1,000 kg / Suitable for RTH Series / Year of Manufacture: 2022 Price: €17,890.00 net / €21,289.10 gross - Max. load capacity: 1,000 kg - Width: 1,800 mm - Length (closed): 2,470 mm - Length (extended): 3,420 mm - Front opening: 2,020 mm - Frontal descent: 740 mm - Rotation range: +/- 90° Knjdjzgq U Nepfx Ahioc - Maximum occupants: 3 - Automatic attachment recognition: yes Key features: - Rotating, extendable work platform - Foldable guardrail for safe entry and exit - Suitable for entering/exiting at height - Sensor monitoring prevents machine movement when the entry is open - Galvanised, reinforced steel construction - Non-slip flooring for safe work at heights - Overload sensor - Rack-and-pinion drive ensures smooth and jerk-free rotation during start-up and braking - Equipped with convenient fork pockets for transportation by forklift - Remote control is required for using the work platform and must be installed on the machine This attachment is suitable for the RTH series. Product code: ATT-01-020 We have many other immediately available attachments for Magni in stock! Mr. Herden (Tel. ...) will be happy to assist you. We are pleased to provide financing options upon request. We are official sales and service partners for Magni, OilQuick, Weber MT, Holp Telehandlers, DMS, Seppi M., Westtech, JCB Construction Machinery, Mercedes-Benz, and Iveco. With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the full range of Magni products! Subject to prior sale and errors. Internal No.: 019085 = Further information = New: No Usage: Construction Contact Marius Herden for more information.

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Kedoyzc Ruopfx Ahionc

Year of construction: 2022, condition: used, For inquiries regarding this attachment, please contact Mr. Herden (via telephone). Westtech Woodcracker C450 Harvesting Grapple / incl. collection grapple / incl. rotator / incl. autospeed function / incl. power rotator / incl. OQ70/55 quick coupler adapter plate / incl. V90 electrical connector / incl. electrohydraulic switching / in stock & immediately available / Year of manufacture: 2022 / very good condition Price: €50,390.00 net / €59,964.10 gross - Cutting diameter softwood (mm): 500 Kjdpoyix N Iefx Ahijnc - Cutting diameter hardwood (mm): 450 - Grapple opening (mm): 1,600 - Shear opening (mm): 800 - Own weight (basic – fully equipped) (kg): 1,760 – 2,350 - Recommended hydraulic flow main circuit (l/min): 80 – 160 - Recommended operating pressure (bar): 280 - Recommended hydraulic flow auxiliary circuit (l/min): 45–60 - Carrier vehicle operating weight (t): 20 – 25 Equipment: - incl. collection grapple - incl. autospeed function - incl. endless rotator - incl. power rotator - electrohydraulic switching between collection grapple and rotator - incl. OilQuick OQ70/55 adapter plate - incl. V90 electrical connector We also have a wide range of further adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a large selection of various products from Westtech that are available for immediate delivery! Mr. Herden (phone) will be happy to assist you. On request, we are also pleased to provide you with a financing offer. We are an official sales and service partner for Magni telehandlers, OilQuick, Weber MT, Holp, DMS, Gierking GMT, Seppi M., Westtech, JCB construction equipment, Mercedes-Benz, and Iveco. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products for you! Subject to prior sale and errors! Internal No.: 522255 = More information = New: No Part suitable for: Application in forestry Please contact Marius Herden for further details.

Condition: used, Year of construction: 2022, operating hours: 2,487 h, Equipment: all wheel drive, JCB 3CX Compact backhoe loader from the year 2022, including a hydraulic hammer and 3 buckets! Kjdoz Ed Dljpfx Ahienc ---- * Manufacturer: JCB * Model: 3CX Compact * Year of manufacture: 2022 * Recorded operating hours: approx. 2,487 * Operating weight: 6,275 kg * Power: 55 kW * Includes hydraulic hammer * Includes 3 buckets * Good condition! * Telescopic arm * Folding bucket * More photos and video available upon request (WhatsApp Erik) * Price: EUR 49,900, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee; errors and prior sale are reserved.

Condition: excellent (used), Year of construction: 2022, Make: HSM Knsdpoz Snziefx Ahisc Model: V-Press 1160 max Year of manufacture: 2022 Pressing force: 594 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feeding opening dimensions: 119.5 cm x 65 cm

Condition: used, functionality: fully functional, machine/vehicle number: FN 67xxxx, Year of construction: 2022, operating hours: 6,030 h, load capacity: 1,500 kg, lifting height: 5,500 mm, free lift: 1,825 mm, fuel type: electric, mast type: triplex, construction height: 2,415 mm, fork length: 1,150 mm, empty load weight: 3,206 kg, total length: 1,779 mm, drive type: Elektro, construction width: 1,060 mm, Electric 3-wheel forklift Knodpfxezqhile Ahiec Chassis number: FN 67xxxx Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire size: SE 18x7-8 Rear tire type: Superelastic Rear tire size: SE 140/55-9 Battery voltage: 48V Battery Ah: 500Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2022 Description: serviced, technically and visually refurbished, safety inspection passed, sold as is/no warranty for defects Side shifter, integrated 3rd valve, rear work light, front work light, impulse control, full free lift, CE certificate, Floor spot light front and rear, Solo-Pilot, panoramic mirror, battery (04/2022) with Aquamatik, external charger included

Condition: good (used), Year of construction: 2008, screw conveyor diameter: 75 mm, Type: KME 75-36 R AC Knjdps Abnidefx Ahisc Year of manufacture: 2008 Capacity: Screw ø 75-36D; approx. 660 kg/h Condition: Functionality tested Drive: A.C. motor 182.0 kW Note: Co-extruder, year of manufacture 2015

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: 101920101021,

Condition: good (used), Year of construction: 2008, screw conveyor diameter: 75 mm, Capacity: Screw conveyor, ø 75-36D; approx. 600 kg/h Drive: A.C. motor, 182.0 kW Ksdpfj Abc Hkox Ahienc

Condition: used, Year of construction: 2022, operating hours: 1,700 h,

Operating hours: 1,801 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 2,000 kg Forks Fork length: 1,150 mm Battery Battery voltage: 24 V Battery capacity: 375 Ah Battery type: 3 PzS Battery resting voltage: 24.6 V Knodsz R D E Uopfx Ahijc Operating data Operating hours: 1,801 h Inspections and service Service valid until: 09/2027 UVV (Occupational Safety) certificate valid until: 09/2027 MACHINE DETAILS General Manufacturer: Linde Type: T20AP Year of manufacture: 2022 Dimensions and weight Overall length: 1,900 mm Overall width: 800 mm Overall height: 1,000 mm Own weight: 800 kg EQUIPMENT Fronius battery charger Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 331

Operating hours: 10,778 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast Mast type: Duplex mast with full free lift Lifting height: 3,760 mm Load capacity: 3,000 kg Knsdpfxsz R D Ago Ahisc Fork length: 1,200 mm Hydraulics: 3rd valve Side shifter: included Drive and Battery Drive type: Electric Battery voltage: 80 V Battery capacity: 775 Ah Battery date of manufacture: Week 48/2022 Battery voltage at rest: 84.5 V MACHINE DETAILS General Manufacturer: Linde Type: E30HL Year of manufacture: 2018 Operating hours: 10,778 h Dead weight: 5,800 kg Dimensions Overall length: 3,700 mm Overall width: 1,200 mm Overall height: 2,500 mm Inspections and Service Service valid until: UVV (German accident prevention regulations) valid until: EQUIPMENT Duplex mast with full free lift Side shifter Semi-cabin with windshield wiper Roof panel Lateral fall protection, removable LED work light, front LED work light, rear Safety light, front Safety light, rear Comfort seat Facelift model with tilt angle indicator All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for trucks with a height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 193

Operating hours: 7,209 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,400 kg Lifting height Lifting height: 1,844 mm Forks Fork length: 1,150 mm Battery Battery type: Lithium-ion Battery voltage: 24 V Battery capacity: 410 Ah Measured idle voltage: 25.5 V Operating data Operating hours: 7,209 h MACHINE DETAILS General Manufacturer: Linde Type: L14AP Year of manufacture: 2022 Own weight: 1,400 kg Dimensions Overall length: 210 mm (?) Overall width: 800 mm Overall height: 1,490 mm Inspections and service Service valid until: 09/2027 UVV (Occupational Safety) valid until: 09/2027 EQUIPMENT Folding platform Lithium-ion battery Charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Knjdpfxsz R Rfpe Ahijc Lateral loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 464

Condition: used, total height: 1,500 mm, total length: 5,500 mm, total width: 1,100 mm, Year of manufacture: 2022 Colour: White Weight: 1.650 kg Price: On request Kjdpfx Aezx Aghehionc - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 1000054777 - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - - Tools available: Yes - └ 4th unit type: Fine milling unit - └ 5th unit type: Corner rounding unit - └ 6th unit type: Radius scraping unit - └ 7th unit type: Flat scraping unit - └ 8th unit type: Brushing unit - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 5 - Edge band height [mm]: 64 - Min. panel thickness [mm]: 10 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 50 - Min. panel length [mm]: 150 - Max. panel length [mm]: 3200 - Feed speed control: Continuously adjustable - Glue system: Glue pot - Type of glue: PUR/EVA - Voltage [V]: 400 - Current consumption [A]: 22 - Power [kW]: 11.9 - Transport dimensions: 5500mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 1650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), mileage: 196,599 km, power: 350 kW (475.87 HP), first registration: 04/2022, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 4x2, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, onboard computer, power assisted steering, power mirror, retarder, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive cruise control - Alarm system - Aluminum fuel tank - Outside temperature gauge - Heated mirrors - Passenger seat - Leaf spring suspension - Sunroof - Differential lock - Digital tachograph - Speed limiter - Air conditioning - Refrigerator - Air suspension - Air-suspended seats - Air horn - Radio/CD player - Rear view camera - Sleeper cab - Side door - Sun visor - Lane keeping assist - Stability control - Automatic heating system - Tool box - Power take-off (PTO) - Tow hitch = Further Information = Technical Information Number of cylinders: 6 Kjdpfx Ahszvfiteionc Engine displacement: 12,809 cc Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65 R 22.5; Max. axle load: 7500 kg; Steered; Tire tread depth left: 90%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Rear axle: Tire size: 315/80 R 22.5; Dual tires; Differential lock; Max. axle load: 11500 kg; Tire tread depth left inside: 80%; Tire tread depth left outside: 60%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 10,840 kg Payload: 7,160 kg GVWR: 18,000 kg Functional Body manufacturer: MEILLER AK 12 MT Pump: Yes Condition Technical condition: very good Optical condition: very good Damage: none

Condition: used, Year of construction: 2007, machine/vehicle number: 0185476, Offer 26283 Technical data: - Water-cooled WIG – DC welding system, mobile - Welding current continuously adjustable with digital display - min. 5 A to max. 420 A - Mains connection 400 V - Including: - SYNERGIC control with programmable welding tasks - 2-cycle – 4-cycle setting - HF ignition and Liftarc - Gas pre-flow control, etc. - Hose set 8m, lightweight design - Ground cable - Pressure regulator - Space requirement approx. W 700 x H 1200 x D 1200 mm Knsdoz Rwiyjpfx Ahiec - Weight approx. 200 kg

Condition: excellent (used), functionality: fully functional, Manufacturer AMADA Model AC255NT Year 2008 Machine type CNC Turret Punch Press Punching force 20 tons / 200 kN Drive system Single AC Servo Drive Kodpfxozzn Tle Ahisnc CNC control AMNC-F X-axis travel 1,270 mm Y-axis travel 1,270 mm Sheet capacity with repositioning Approx. 2,500 × 1,270 mm Max. mild steel thickness Approx. 3.2 mm Max. workpiece weight Approx. 150 kg Max. punching diameter Approx. Ø88.9 mm Turret configuration Depending on configuration: 45 / 51 / 58 stations Auto Index stations Depending on configuration Turret rotation speed Approx. 30 rpm Auto Index speed Approx. 60 rpm Max. punching speed Approx. 370 strokes/min Marking speed Up to approx. 900 strokes/min Punching accuracy Approx. ±0.1 mm Power requirement Approx. 19 kVA Air pressure Approx. 5 bar Machine weight Approx. 12,000 kg Machine dimensions Approx. 4,100 × 2,560 mm, depending on configuration Feeder Automatic sheet feeder / loading system Sheet size for feeder Approx. 1,250 × 2,500 mm fully functionel

Condition: used, Year of construction: 2022, Loma IQ3 metal detector on conveyor, built in 2022 This Loma IQ3 metal detector is mounted on its own conveyor with a 300 mm wide modular belt and a reject bin. The aperture is 350 × 100 mm (w × h), the belt is 2,300 mm long. The detector is operated via the touchscreen on the detector head. Located in Emmeloord, the Netherlands. Available on request, price on request. More photos and full specifications: / Type: Metal detector with conveyor Aperture: 350 × 100 mm (w × h) Knjdoz Nc Tmepfx Ahisc Belt width: 300 mm Belt length: 2,300 mm Dimensions: Approx. 2,300 × 900 × 1,450 mm (l × w × h)

Condition: ready for operation (used), WEISSER SÖHNE UNIVERTOR AC-2 High-precision, twin-spindle vertical CNC turning center. Complete and fully ready for operation. Knjdpfx Aoz Sd D Iohijc

Condition: excellent (used), mileage: 138,779 km, power: 350 kW (475.87 HP), first registration: 07/2022, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 4x2, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2022, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, onboard computer, power assisted steering, power mirror, retarder, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive Cruise Control - Alarm System - Aluminum Fuel Tank - Outside Temperature Gauge - Heated Mirrors - Passenger Seat - Leaf Spring Suspension - Car Kit - Sunroof - Differential Lock - Digital Tachograph - Speed Limiter - Air Conditioning - Refrigerator - Air Suspension - Air-Suspended Seats - Air Horn - Particulate Filter - Radio/CD Player - Rearview Camera - Sleeper Cab - Side Door - Sun Visor - Lane Keeping Assist - Stability Control - Power Take-Off (PTO) - Tow Hitch Knsdozvfm Sspfx Ahisc = Additional Information = Technical Information Number of Cylinders: 6 Engine Displacement: 12,809 cc Axle Configuration Brakes: Disc Brakes Front Axle: Tire Size: 385/65 R 22.5; Max. Axle Load: 8000 kg; Steered; Tire Tread Depth Left: 60%; Tire Tread Depth Right: 60%; Suspension: Leaf Spring Suspension Rear Axle: Tire Size: 315/80 R 22.5; Dual Tires; Differential Lock; Max. Axle Load: 11500 kg; Tire Tread Depth Left (inside): 60%; Tire Tread Depth Left (outside): 60%; Tire Tread Depth Right (inside): 80%; Tire Tread Depth Right (outside): 80%; Reduction: single reduction; Suspension: Air Suspension Weights Unladen Weight: 10,840 kg Payload: 7,160 kg GVW: 18,000 kg Functional Body Brand: MEILLER AK 12 MT Pump: Yes Condition Technical Condition: very good Optical Condition: very good Damage: none

Condition: used, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Year of manufacture: 2022 Colour: Grey Empty weight: 4.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes Kodpfx Ahezwul Hsisnc - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: WoodFlash - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 - Tools included: Yes - CNC options: Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2010, machine/vehicle number: IntNr231643, LTA AC 3001 _E120 Knsdpfxoz Ruv Ds Ahijc Infinitely variable fan speed control (0-10V in the 230V version) · Low energy consumption thanks to filter elements with minimal pressure loss and energy-efficient fans · Filtration stages for the separation of coolant mist · Mechanical solid particle filter · Suitable for use with oil/emulsion mist · High-voltage generator with two pre-programmed voltage levels · Direct mounting on the machine is possible · Separation efficiency of up to 99% - Dimensions (L x W x H): 1130x625x610 mm - Weight: 135 kg Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, machine/vehicle number: PKY391L00221, Year of construction: 2022, operating hours: 15,536 h, load capacity: 2,000 kg, lifting height: 3,150 mm, fuel type: gas, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 3,150 mm MACHINE DETAILS Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,150 x 2,196 mm Self-weight: 3,290 kg Next service due in: 464 hours UVV certificate valid until: 06/2027 Kedjz Nxf Tepfx Ahisnc Tires replaced: 06/2026 Operating hours: 15,536 hours EQUIPMENT Facelift model with tilt angle indicator Clear-view mast without central hydraulic cylinder 3rd hydraulic valve Side shifter Full cabin Air conditioning Heater Windshield wiper LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Seat heating LPG gas tank All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is carried out at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 181