Used 4 Rol Plate Bender 3500 X 110 Mm for sale (117,314)

Year of construction: 2018, condition: good (used), Make: FACCIN Type: 4HEL 3590 Control: Siemens TOUCH Year: 2018 Specifications Metric US Standard Rolling width 3500 mm Rolling thickness 3x toproll Ø 80 mm Rolling thickness 5x toproll Ø 110 mm Rolling thickness prebending 90 mm Top Roll Ø 900 mm Top Roll Ø 900 mm Bottom Roll Ø Godpfxokvm Nfj Aqgsuh 800 mm Side roll Ø 600 mm Number of rolls 4 Rolling speed 0-6 Adjustiment lower roll 0-200 mm/min. Adjustment side rolls 0-400 mm/min. Top support yes Side supports yes Number of driven rolls 2 Power 90+75+9 kW Dimensions (Estimate) Length 4430 mm Width 8800 mm Height 11000 mm Weight 178000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, - *Brand: FAMAR S.N.C. Officine Meccaniche - ALBIATE (MI) Italy* - *MODEL: A311 - 15/4* - *SERIES No. 571 - YEAR 1990* - Compliance: MAY 1990 - Art. R.233-69 of the Labor Code (French plate) - Type: Asymmetrical 3-roll bending machine *Features:* - Usable length: *1500 mm* (15 = 15 decimeters) Gusdpoz E R Aujfx Aqgeh - Thickness: *4 mm max in steel* (15/4 = 1500 x 4) - Rolls Ø ~ 110-120mm, hardened steel - Motorized: rear green motor as seen, 2.2kW - Control: remote control panel *FORWARD / REVERSE + UP / DOWN* (lower roll adjustable) - Weight: *~ 1,250 kg*

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) Guedpoz Nyc Hsfx Aqgsh 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: good (used), Cast iron bed - Floor Plate Guodpfx Aqoz I A Ubogeh Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Godoy Aubuepfx Aqgjuh Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: used, Cast iron bed Gsdpfx Aqez H Ixcjgouh Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 Guodpfswk Rlxsx Aqgeh max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 4ROLL DUAL PREPINCH, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 430 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 35 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness brass (max.): 50 mm, overall weight: 35,000 kg, total length: 6,100 mm, total width: 2,225 mm, total height: 2,700 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 7, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, PLATE BENDING MACHINE 4 ROLL HYDRAULIC 3000 X 40 MM brand OMCCA YEAR 2009 DOUBLE INITIAL PINCH Machine used in working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 30 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 430 mm One extra smaller upper roll D=350mm fast interchangeable • Hardening of the rolls high strength surface • All 4 rolls driven hydraulic powered rollers rotation • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. Guedpfx Asz Rw R Doqgsh • Opening of top roll hydraulic drop-end to unload the plate being formed • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and digital readout 3 axis. • Digital readouts of the rolls position and top support • Power electric 50 Hp voltage 3-phase 400 /50 • Dimension 6100 x2225 x H 2700 mm - weight 35000kgs Additional tooling with the machine Top central support motorized to hold in place the formed plate up to diameter 3500 mm Side support hydraulic dual articulation

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Godpfszt Sxvsx Aqgsuh Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Gujdekvm S Nopfx Aqgeh Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length Gujdpfx Aokvm Szeqgoh 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Guedeyzc Iaopfx Aqgeh Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 4ROLL 3000X 15 MM, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller diameter: 310 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, overall weight: 8,500 kg, total length: 5,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 7.35 kW (9.99 HP), number of digital displays: 2, warranty duration: 12 months, cone diameter: 400 mm, working length: 3,000 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells Guodpfx Aowfc S Tsqgeh -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat

Condition: used, Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Godjz Izmispfx Aqgouh Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Gsdoz I A Nropfx Aqgsuh Weight: approx 4,5 T

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Thickness: 300 mm Height on feet: 900 mm Guodez H Iymopfx Aqgeh Delivered with 12 leveling feet Weight : 6,3 T

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 22 mm pre-bend 18 mm --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Godpfx Aeid Al Noqgouh Manuals and schematics originals

Condition: excellent (used), Technical specifications: Guodpfx Aezbcwmjqgjh Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Godpfezbqquox Aqgjuh Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm Gsdpfey D Ngzsx Aqgeuh pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: good (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: 4roll 2000x6 mm, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 155 mm, roller (top) diameter: 165 mm, side roll diameter: 120 mm, roller diameter: 165 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 600 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, overall weight: 2,200 kg, total length: 3,400 mm, total width: 1,150 mm, total height: 1,100 mm, power: 2.21 kW (3.00 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, emergency stop, hardened rollers, -roll 2000x6 mm plate bending machine Davi model MAX2017 year 2004 used plate roll in working condition, Planetary dual pre-pinch Performance Capacity: Plate width 2000 mm plate thickness 6 mm pre-bend 5 mm minimum rolling diameter ID 350 mm rollers length 2050 mm Gjdpezy N Afofx Aqgouh Upper roll 165 mm Pinch roll 155 mm Side rolls 120 mm Power electric motor 3 kw on hydraulic unit Vac 400/50 mm Installed configuration Rollers surface hardened high strength Conical plate rolling, cone bending Hydraulic commands via leverage distributors Infinitely variable speed control Digital position readout --- Hydraulic driven motorized the central rolls Pre-pinch pressure adjustable for pre-bend Drop-end front open to unload closed shells Re-rolling system for calibration of welded shell Safety and emergency stop machine dimension 3400x1150xH 1100 mm -weight 2200kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 3ROLL 4000 X 6 MM, roller (bottom) diameter: 300 mm, roller diameter: 310 mm, roller length: 4,050 mm, working width: 4,000 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 11,000 kg, total length: 5,700 mm, total width: 1,500 mm, total height: 1,700 mm, type of input current: three-phase, working length: 4,000 mm, Equipment: documentation/manual, emergency stop, 3 ROLL PLATE BENDING MACHINE WITH PREPINCHING capacity plate roll 4000 x 6 mm Plate width 4000 mm Thickness plate rolling 6 mm Pyramid 3 rolls with pre-pinch cylindrical plate rolling Conical plate rolling Rollers surface length 4050 mm Top roll 310 mm Side rolls 300 mm Datasheet power rollers rotation 15 Hp -3 rolls driven rotation with gear unit power bending- prebend side lower rollers 7,5+7,5 Hp Cene bending attachment rollers tiltable for plate conical forming - hardened contrast pad roller type Hydraulic open front drop-end , top-roll tilt-up wide opening for unloading Console electric on wheels, electric push buttons commands remote Digital readouts rollers position repetability safety and emergency installiton Gusdpfx Aqsvn I Hcogsh machine in working condition dimension 5700 x1500 x H1700 mm weight 11 Ton

Condition: used, Longitudinal circular saw Longitudinal panel saw Cross-cut / longitudinal circular saw, year 1999 operates from below Gusdoq E Ivtspfx Aqgoh for lengths up to 4.7 m material thickness up to 110 mm also suitable as a travelling saw behind a production line INFO!! For such a new Flender circular saw flat motor 10 kW, you pay 4,700 EUR which is more than you pay for the entire machine at company jöma.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use Gusdpfx Aqoza D U Djgoh The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, sheet thickness steel (max.): 4 mm, back gauge: 1,000 mm, CIDAN EVO DUO metal shear is the strongest mechanical shear on the market, with a capacity to handle sheet thicknesses from 0.5 mm to 4.0 mm in the same machine (applies to EVO DUO 32). EVO DUO is a powerful built guillotine shear equipped with two (DUO) gearmotors that distribute power and load optimally. The CIDAN EVO DUO metal shear is available in two lengths, 3200 mm and 4100 mm. The machine is well equipped as standard with a lot of features that creates a perfect working environment that meets the greatest demands on efficiency and ergonomics: Blade gap adjustment Sheet support – supports the material during the cut, as standard designed for return to sender. As option with delivery to the rear side of the machine. Pneumatic hold-down beam that enables gentle handling of softer materials, such as aluminum. The distance from the hold-down beam to the cutting line is less than 35 mm, which minimizes the material waste. Guodsm Nbq Repfx Aqgeh Flexible table with T-groove rails for table pans, fixed and adjustable angular stops and support arms that can be rearranged and replaced. EVO DUO guillotine shear can be equipped with a 750 or 1000 mm programmable back gauge with CutLink finger touch control. The back gauge is a fast and accurate positioning system with many interesting functions that facilitate the handling of the sheet metal. CIDAN shear EVO DUO fits well with the CIDAN philosophy of low environmental impact, as the machine has low energy consumption, a very low noise level and is designed for maximum usability.