Used 44 Connectors for sale (5,174)

Condition: new, functionality: fully functional, !!! We have two pcs in stock. Price is for one pc only !!! Performance & Measurement • Measurement Principle: Thermal mass flow bypass sensor with a laminar flow element. • Flow Range (10K Sub-code): Configured for low to mid-range capacities, nominal 0.08 to 10 ln/min (up to 15 ln/min max depending on the specific gas calibration). • Accuracy: ±0.5% of Reading plus ±0.1% of Full Scale (standard for dry/clean gases). • Repeatability: < ±0.2% of Reading. • Settling Time: Standard 1 to 2 seconds. • Turndown Ratio: 1:50 in analog mode (digitally extendable up to 1:187.5). Mechanical & Environmental • Ingress Protection: IP65 dust-tight and water-jet proof rugged housing. Kedpfez Hq Rbox Ahijnc • Pressure Rating: Up to 64 bar abs (PN64). • Operating Temperature: -10°C to +70°C. • Wetted Materials: Stainless steel 316L or equivalent. • Weight: 1.4 kg. Electrical & Communication • Power Supply: +15…24 Vdc (±10%). • Power Consumption: Max 320 mA (approx. 3.5 W typical at 24V). • Analog I/O: 0…5 (10) Vdc or 0 (4)…20 mA. • Digital Interfaces: Standard RS232 with configurable fieldbus options (e.g., PROFIBUS DP, DeviceNet, Modbus RTU, EtherCAT, PROFINET). Model code breakdown: • AGD: Represents the precise hardware configuration configuration, internal control valve size, and basic orifice profile. • 44: Specifies the primary electrical connection setup (typically an 8-pin DIN male connector for power/analog/RS232 plus secondary M12 fieldbus options optimized for IP65 environments). • V: Denotes Viton (FKM) internal elastomer seals and plunger materials. Brand new never used. Please check out our other listings as well.

Condition: good (used), Connectors, plugs, sensor modules Knsdpfoul H D Dex Ahioc -Connectors: 3-pin, 44 pieces Type: unfortunately without a designation -Price/Sale: complete -Dimensions: 41/39/H17 mm -Weight: 2.2 kg

Condition: used, Year of construction: 2007,

Condition: used, Year of construction: 2000, Motor: 7.5 kW Tersa cutterhead, Z = sliding rollers in the thickness table, height-adjustable, steel feed roller, ribbed, infeed roller before and after the thickness table, safety bar. Cutterhead speed: 5000 rpm. Planing height: 2.8 - 250 mm with digital display. Planing width: 630 mm. Max. chip removal: 8 mm. Dust extraction port: 160 mm. Weight: approx. 1115 kg. Dimensions: 1140 x 1260 x 1200 mm. Knsdpfx As Aay D Rohisc Location: Supplier.

Condition: used, Year of construction: 2006, - 528345 Safety device - 528110 CNC central lubrication system Knsdpfjz Algfjx Ahioc - 529166 Central extraction system - 529214 24-position tool changer - 528837 Work table with supports - 528716 16x TV vacuum cups, 145x145 mm - 528717 8x TV vacuum cups, 145x50 mm - 528719 6 positioning aids - 528200 2 cross lasers - 528715 Preparation for clamping cylinder - 528600 Clamping cylinder, Morbidelli - 528121 Vacuum pump - 529207 Reinforced inverter - 528487 Drilling head speed controlled via machine inverter - 523025 Dongle for Xilog - 528409 Software preparation for teleservice - 529334 Clearance height 280 mm - 528525 PC control Storage location: Nattheim

Condition: used, mileage: 958,238 km, power: 210 kW (285.52 HP), first registration: 12/2008, fuel type: diesel, number of seats: 41, gearing type: automatic, next inspection (TÜV): 02/2027, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 Ü (41+44+1+2 emergency seats), fully air-conditioned (Vehicle 727) Kjdpfx Aoz H Ecxohienc First registration: 05.12.2008 958,238 km Engine: 6,374 ccm 210 kW / 286 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 02/2027 Permissible total weight: 19,000 kg, unladen weight: 11,960 kg, payload: 7,040 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approximately 40/60%, rear approximately 40/40% Single door at the front, double door at the rear Driver's cab with door Ramp Fully automatic transmission Microphone 2 x electric and heated mirrors Fully air-conditioned Auxiliary heater + 2nd heater Stop brake 41+44+1+2 emergency seats Emergency exit 12-volt socket Chassis with slight rust 07.02.2024: ECAS height sensor, rear axle, right side, new 03.05.2024: Handbrake valve, new 24.07.2024: Front axle, brake disc + pads, new 13.05.2024: Steering knuckle, front axle, left side, new 24.07.2024: Crankshaft oil seal, transmission side, new 18.09.2024: Upper triangular arm, front axle, right side, new 07.10.2024: Lower triangular arm, front axle, right side, new 08.04.2025: Front axle, left side, 2 x triangular arms + bearings, new 22.04.2025: Pressure regulator/air dryer, new 13.05.2025: Belt tensioner + V-belt, air conditioning, new; air conditioning refilled, actuator, flap, roof, right side, new; wheel brake cylinder, rear axle, right side, new 09.07.2025: 2 x condenser fan, new 05.08.2025: Coolant reservoir, new; 2 x alternator, new 12.05.2026: Front axle, right side, air spring, new; rear axle, right side, shock absorber, new + shock absorber mount, new; Haldex valve, overhauled 03.08.2026: Brake caliper, front axle, left side, new Various signs of wear, consistent with age Last inspection on 05.08.2025 at 913,055 km, next inspection at 973,055 km Price: €5,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the District Court of Ludwigslust; for disputes exceeding this value, it is the Regional Court of Schwerin. Errors, typos, and prior sale are reserved.

Condition: good (used), functionality: fully functional, Dovetail cutter / Trapezoidal groove cutter with stops. Knjdpfxezvn Hbj Ahiec

Year of construction: 2025, condition: new, functionality: fully functional,

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Kedpfx Aeqy Em Tohijnc Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Storage location: Customer Knodpey D Rv Djfx Ahiec

Condition: used, Year of construction: 1978, Liter per hour: 7000 Kjdpfxoz N S T Dj Ahisnc

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, 1. Currently, everything is designed exclusively for use with Inarca connectors/housings. To use other connectors that are not physically identical to Inarca versions, conversion is necessary (the Komax team is most familiar with this). 2. Double crimping is not possible; only single crimping is supported. 3. The ZETA 633/654 machine is equipped with 4 presses. The ZETA 633/656 machine has 3 presses (refer to the PP image from the first email). 4. The Zeta 654 machine features automatic sleeve insertion on the fastons. This is possible for 6.3 and 4.8 terminals. 5. The system can be adapted for different connector pole counts. We used connectors with various pole configurations (2P, 3P, 4P, 7P, 8P), depending on the customer’s requirements. On the 654 machine, connector feeding into the machine is automatic via a vibratory feeder. On the 656 machine, connectors are manually placed onto a pallet (one is inserted, the other pallet is in the stack and conductors are automatically inserted). 6. The presses are “smart” and automatically adjust the clamping height to the conductor. Knsdpfx Ahjy Nfm Isioc 7. The machines do not have an injection molding unit. 8. In practice, the maximum processed length has been 1,500 mm. According to technical specifications, even longer lengths are possible (see technical data below for each machine). 9. On the Zeta 656, connectors can be crimped on both ends of the conductors. On the Zeta 654, this is only possible on one end (see image below).

Condition: ready for operation (used), bar length: 4,400 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Knedpfxsw Rfkbs Ahijc Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg

Condition: used, functionality: fully functional, Wohlenberg 44 FS 50 automatic three-knife trimmer. Complete with accessories. Knjdpfxexdm Dbe Ahisc

Condition: used, Year of construction: 1988, Technical details: pressure: 10 t workpiece diameter - max.: 40 mm Knjdpsw D Aq Tefx Ahiec threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm revolution per minute: 47-94 U/min feed speed: 0,5 - 6 mm/s work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories *

Condition: excellent (used), Year of construction: 2015, Extraction unit HURRICAN JSS-3-6-44-800, year of manufacture 2007/2015. Current air volume flow: 87,900 m3/h. Filter area: 796 m2. Maximum surface load: 130 m3/m2/h. Reserve capacity: 15,800 m3/h. Length approx. 8,950 mm + return air. Width: 2,950 mm. Height: 9,720 mm. Dust type: wood chips/dust. Knedpfx Ahsv Dfr Ueijc

Condition: used, mileage: 839,600 km, power: 210 kW (285.52 HP), first registration: 11/2009, fuel type: diesel, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: air conditioning, parking heater, * Mercedes-Benz Ciatro O530K * Transmission recently renewed * 30+44 seats * 10.6m length * EVOBUS * LAWO destination display * Wheelchair ramp * Air conditioning * Auxiliary heater * Tachograph * Euro 5 * Subject to prior sale, errors and alterations excepted Kjdpfx Aoxc Rxyehionc

Condition: used, mileage: 436,340 km, power: 206 kW (280.08 HP), first registration: 12/2015, fuel type: diesel, number of seats: 45, gearing type: automatic, next inspection (TÜV): 06/2027, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typos, and prior sale: MAN Lions City UE A20, 45+44+1 + 2 emergency seats (Vehicle 80) First registration: December 16, 2015 436,340 km Engine: 10,518 ccm 205 kW / 279 hp Euro 6 MOT valid until 12/2026, TÜV (technical inspection) valid until 06/2027 Permissible gross vehicle weight: 19,500 kg, unladen weight: 11,687 kg, payload: 7,813 kg Overall length: 11,980 mm x overall width: 2,500 mm x overall height: 2,985 mm Single door at the front, double door at the rear Driver's cabin with door 45+44+1+2 emergency seats Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave Kjdsz E Abijpfx Ahijnc 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system with ticket machine Tires 275/70R22.5, front approx. 60%, rear approx. 30/40% March 26, 2024: New oil filler tube, December 9, 2024: Upper axle strut on the right rear axle new, left engine mount new, serpentine belt for the alternator new, December 9, 2024: Brake chamber on the right front axle new, brake caliper on the left front axle overhauled, brake caliper on the left rear axle new, December 10, 2024: Pressure relief valve next to the gearbox new, tie rod end new, June 3, 2025: Left engine mount new, December 15, 2025: Left engine mount new. Various signs of wear and tear, commensurate with the age of the vehicle. Good overall condition. Last inspection at 428,444 km on March 3, 2026, next inspection at 498,464 km. Price: € 40,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Errors, typos, and prior sale are subject to change.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 1. Currently, everything is designed exclusively for use with Inarca connectors/housings. To use other connectors that are not physically identical to Inarca versions, conversion is necessary (the Komax team is most familiar with this). 2. Double crimping is not possible; only single crimping is supported. 3. The ZETA 633/654 machine is equipped with 4 presses. The ZETA 633/656 machine has 3 presses (refer to the PP image from the first email). 4. The Zeta 654 machine features automatic sleeve insertion on the fastons. This is possible for 6.3 and 4.8 terminals. 5. The system can be adapted for different connector pole counts. We used connectors with various pole configurations (2P, 3P, 4P, 7P, 8P), depending on the customer’s requirements. On the 654 machine, connector feeding into the machine is automatic via a vibratory feeder. On the 656 machine, connectors are manually placed onto a pallet (one is inserted, the other pallet is in the stack and conductors are automatically inserted). 6. The presses are “smart” and automatically adjust the clamping height to the conductor. 7. The machines do not have an injection molding unit. 8. In practice, the maximum processed length has been 1,500 mm. According to technical specifications, even longer lengths are possible (see technical data below for each machine). 9. On the Zeta 656, connectors can be crimped on both ends of the conductors. On the Zeta 654, this is only possible on one end (see image below). Kjdpfx Ahsy I Dr Tsienc

Condition: used, mileage: 450,175 km, power: 182 kW (247.45 HP), first registration: 12/2017, fuel type: diesel, number of seats: 44, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro6, color: white, Year of construction: 2017, Equipment: ABS, air conditioning, 7 UNITS AVAILABLE. Ksdpfx Ahez I H Irsienc

Condition: good (used), Stephan Cutter, Model 44 Knodpfx Ajz D Dvxjhiec 400 V

Condition: used, mileage: 567,000 km, power: 309 kW (420.12 HP), first registration: 10/2007, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 5,350 mm, loading space width: 2,450 mm, loading space height: 800 mm, Year of construction: 2007, Equipment: ABS, crane, Renault Kerax 420 DCI Tipper 5,35 m + CRANE + REMOTE CONTROL Accident-FREE Knodpozrkm Aefx Ahioc IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2007 ? MILAGE: 567 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH TIPPER: 535 x 245 x 80 cm (L x W x H) CAPACITY: 14 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 175/247/135 cm TIRE SIZE: 13R22,5 SPRING SUSPENSION ON BOTH AXLE CRANE: PALFINGER PK 44 002 + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 4521

Condition: new, Hose reel plus P40 connection thread 26.44 mm G 3/4 inch GEKA · Robust, powder-coated steel construction · Suitable for drinking water; water-carrying components comply with the drinking water regulations Kedpfe Abxb Dsx Ahijnc · Curved inlet pipe protects against kinking of the hose · Practical device holder · Temperature range: +4 °C to +60 °C · Pre-assembled without hose; spare parts available on request · Other technical specifications: Weight: 15 kg Working pressure bar: max. 20 Weight kg: 15.3 Connection thread inch: G 3/4 Hose capacity: Ø 13 mm (1/2") = 60 m Ø 16 mm (5/8") = 55 m Ø 19 mm (3/4") = 40 m Connection thread mm: 26.44

Condition: used, machine/vehicle number: 007618, Max. panel width: 4400 mm Knjdpfx Aheu N Slioiec Max. panel length: 4400 mm Main saw blade projection: 75 mm No of Grippers: 7

Condition: new, Cable connector assortment, 287 pieces, 0.5-6 mm² in a KNIPEX assortment case · for cable connectors · in a mini-Systainer, 2 stackable plastic inserts with 6 recesses each for connectors · includes a selection of commonly used cable connectors · Contents, item no. 4000 810 389: 1 piece of Universal stripping pliers MultiStrip® 10 (item no. 4000 810 428), 1 piece of crimping pliers PreciForce® (item no. 4000 810 434), 25 pieces each of: - Flat pin sleeves, 6.3x0.8 mm, 0.5-1 mm² - Flat pin sleeves, 6.3x0.8 mm, 1.5-2.5 mm² - Cable lugs, ring type, Ø 4 mm, 0.5-1 mm² - Cable lugs, ring type, Ø 5 mm, 0.5-1 mm² - Cable lugs, ring type, Ø 4 mm, 1.5-2.5 mm² - Cable lugs, ring type, Ø 5 mm, 1.5-2.5 mm² - Cable lugs, ring type, Ø 6 mm, 1.5-2.5 mm² - Cable lugs, ring type, Ø 6 mm, 4.0-6.0 mm² - Cable lugs, ring type, Ø 8 mm, 4.0-6.0 mm² - Butt connectors, insulated, red, 0.5-1 mm² - Butt connectors, insulated, blue, 1.5-2.5 mm² - Butt connectors, insulated, yellow, 4.0-6.0 mm² Kodpfx Ahe Abzkzjienc Contents: 287 pieces