Used Abm Greiffenberger 3 Df 1/132 Sa-2 for sale (120,124)

Condition: good (used), Electric motor, three-phase motor -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sa-2 -Power: 5.5 kW -Speed: 2890 rpm -Shaft: Ø 38 x 65 mm -Design: B5 Bsdpfowkr Rvjx Abljwr -Protection class: IP 54/55 -Number: 2x available -Price: per piece -Dimensions: 430/300/H250 mm -Weight: 36 kg

Condition: good (used), Electric motor, three-phase motor Bwodpswktbpefx Abljr -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sb-2 -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection class: IP 54/55 -Dimensions: 450/300/H250 mm -Weight: 43 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor, crane motor -Manufacturer: ABM Greiffenberger -Engine: Type 3G225F/132 / D 80 b-4 -Power: 0.75 kW -Speed: 4 rpm -Design: B5 -Shaft: Ø 65 x 105 mm -Protection class: IP 54/55 Bwedoxamghspfx Ablor -Dimensions: 705/305/H400 mm -Weight: 106 kg

Condition: used, Three-phase motor, electric motor -Power: 3 kW -Speed: 950 rpm Bwodpfx Aecng U Usbljr -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP44 -Number: 1x available -Price: per piece -Dimensions: 520/300/H245 mm -Weight: 48 kg

Condition: used, Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 450/295/H250 mm Bwedpfx Aoc Nirxsbler -Weight: 43 kg

Condition: used, Three-phase motor, electric motor Bwedpfxedwf Tgj Abljr -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP55 -Dimensions: 450/295/H250 mm -Weight: 43 kg

Condition: good (used), Electric motor, three-phase motor -Manufacturer: ABM Baumuller, electric motor type 3.DF 63 o-4/2 -Power: 0.18 / 0.25 kW -Speed: 1390/2820 rpm -Shaft: Ø 11 x 22 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 205/160 / H130 mm -Weight: 4.8 kg Bwedpfxeg Dg R Tj Ablor

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: DF 132-G90 S/6 -Speed: 22 rpm -Power: 1 kW Bodpfsx Tdy Uex Ablswr -Shaft: Ø 40 x 80 mm -Protection rating: IP54 -Dimensions: 575/250/H240 mm -Weight: 42 kg

Condition: used, Double coiler, coiler, decoiler, for sheet metal processing, punch, eccentric press, hydraulic press, punching machine Bodjd Nttnjpfx Ablswr -Handover in the current condition as seen -Drive: without -Max. Recording: Ø 590 mm -min Recording: Ø 250 mm - Recording width: 300 mm -Dimensions: 1460/1000/H1400 mm -Weight: 332 kg

Condition: used, Electric motor, three-phase motor -Manufacturer: VEM, electric motor from milling machine WMW HECKERT FSS 315-V -Type: KR 132. 1/2 Bedogxcu Aspfx Abljwr -Power: 5.5 kW -Speed: 2870 rpm -Shaft: Ø 32 x 80 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 470/340 / H410 mm -Weight: 74 kg

Condition: good (used), 3 kW 1.500 UpM 8,7 - 52 UpM 444-800 Nm Bwsdeylcn Tepfx Ablor

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Electric motor: 80 V with 2 hydraulic pumps -Power: 2.2 kW Bwodpfxodvmbpj Ablsr -Speed: 1480 rpm -Dimensions: 340/290/H590 mm -Weight: 45 kg

Condition: used, axle configuration: 3 axles, first registration: 05/2003, total length: 11,300 mm, total width: 2,500 mm, total height: 3,800 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2003, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Notes = Number of axles: 3, Unladen weight: 6,500 kg, Gross weight: 34,000 kg, Chassis type: Incomplete chassis, Chassis material: aluminum, Kingpin size: 2 inch, Alloy wheels, Suspension type: air suspension, ABS, EBS, Body year: 2003, Body material: aluminum, Sidewall material: insulated, Drum volume: 34,000, Type of load: heated liquids, Axle type: SAF, 32,000 LITER OIL = Further Information = Bwsdpsyyli Defx Ablsr General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 10 mm; tyre tread right: 9 mm Axle 2: Tyre tread left: 11 mm; tyre tread right: 11 mm Axle 3: Tyre tread left: 9 mm; tyre tread right: 10 mm Weights Unladen weight: 6,500 kg Payload: 27,500 kg Gross vehicle weight: 34,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers for used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, years of manufacture, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good prices • Fair trading • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The safety of 'recognizable quality' • And much more.... Please visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.

Condition: good (used), Wohlenberg 132 TS ASE Paper guillotine Machine in perfect condition, ready for production. Year of manufacture 2015. Available immediately from stock. Equipped with the ASE automatic trim removal system. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes a variety of cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface Bwodpfx Ajzp I Hhoblor – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools, and a conveyor belt.

Condition: used, mileage: 265,818 km, power: 170 kW (231.14 HP), first registration: 01/2014, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, color: blue, gearing type: automatic, emission class: euro6, total length: 8,350 mm, total width: 2,550 mm, total height: 3,400 mm, loading space length: 5,417 mm, loading space width: 2,292 mm, loading space height: 412 mm, Equipment: ABS, crane, electronic stability program (ESP), * Pioneer CD radio with Bluetooth hands-free system * GARMIN navigation * Onboard computer with multi-function steering wheel * Air conditioning * Leaf/air suspension * Hill start assist * Engine brake with constant throttle * HMF 1030 K3 loading crane * Radio remote control system * 2 additional hydraulic outriggers * Max. reach 9.6m with 910 kg lifting capacity * Max. lifting capacity 2400 kg at 3.9m * KLEMM-SUPERTRUCKS window frame, year of manufacture 2013, with 900 kg lifting capacity * Flatbed body with rail system * Storage boxes * Spare wheel * Front tire dimension: 255/70R22.5 * Rear tire dimension: 255/70R22.5 Bwodpfx Aszlnf Nebler * Fuel tank: 180 liters * AdBlue tank: 55 liters * Technical gross vehicle weight: 13500 kg * Unladen weight: 7740 kg * Permissible trailer load: / * Overall length: 8350 mm * Wheelbase: / * Next inspection due: * Vehicle number: 12254 * Subject to errors and prior sale * Advertisements and various lettering have been digitally removed. * We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * TÜV/inspection approval * Complete export handling * Arranging financing * Application for export license plates * Vehicle delivery * Vehicle registration * Recovery and vehicle transport * YOUR VTS TEAM

Condition: used, Electric motor, three-phase motor Bwjdpfx Aoghndyebljr -Power: 0.75 kW -Speed: 2770 rpm -Shaft diameter: 20 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 315/160/H200 mm -Weight: 8.15 kg

Condition: new, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, ZWF/W 18 Center Tube, Central Axle Lift Trailer, Tire Size 22.5, Single Dimensions Chassis designed for interchangeable bodies from 7150 to max. mm (symmetrical bodies) Chassis designed for rear-flush mm (with impact buffer) Test lowering heights: ZWF: Vehicle must lower at least +70mm and raise -20mm, WF: +60mm/-20mm, WFS: +60mm/-20mm Axle loads: 18,000 kg (2 x 9,000 kg) Spring center approx. 1300 mm Support load approx. 1000 kg Lowering heights approx. 1120 to max. 1320 mm via air suspension of the trailer and the tractor unit Coupling height (low coupling) approx. 400 mm unladen Ride height unladen approx. 1100 mm 2nd ride height, if axle lift is used, is approx. 40 mm higher (tire lift via axle lift increases the ride height), only if necessary Ground clearance approx. 1070 mm on level ground Chassis No. generally stamped on the side of the longitudinal member, right side, approx. 100 mm from the front E-wheel holder Prepared for E-wheel holder in winch design for 1 E-wheel Front stop, foldable and adjustable for 7150 mm symmetrical interchangeable bodies Support winches 1 set of drop-leg supports at the rear, height-adjustable 1 set of support winches at the front Coupling device Coupling spring travel approx. 1400 mm Intermediate distance 760 mm (with mm interchangeable body) Connection lines for lights/brakes, route lines inside/on the drawbar on the right Storage for connection lines on the side of the drawbar Drawbar rigid (center tube) with bolted drawbar eye Drawbar eye ø 50 mm SMB axle with Haldex/Wabco/Knorr brake and Weweler air suspension selected 2x axle with large disc brake (430, or 4309/4312/4345) 2x axle 9t 22.5 disc brake, single tires for air suspension Bellows plates, rotate at 340-400 lift (not on the bogie, not with SMB) Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Axle distance approx. 1360 mm (with total lift of approx. 300 mm, 340 mm or 400 mm) 2x air suspension, total lift approx. 400 mm 1 coupling head each, red and yellow Test nipple for brake cylinder pressure on the brake cylinder at the front right Air reservoir 2 x approx. 80 l in steel, painted black (1x brakes, 1x lifting and lowering) Lifting and lowering device at the rear left in the direction of travel Tire pressure control, basic version, connected to the CAN bus system of the EBS Brake/ABS EBS brake system, manufacturer Knorr/Wabco/Haldex at our choice, with Roll Stability Program 2x wheel attachment by center centering 4x tires 385/55 R 22.5 instead of 385/65 22.5, brand manufacturer at choice, system on -wheel 11.75 x 22.5 Brand tires 385/55 R 22.5 at choice Spiralflex Spiralflex cables and hoses for light and brake connection to the tractor unit, with mounting plate (standard) 15-pole plug or socket at the front Lighting system 24 Volt with large multi-function lamp Lighting system/wiring system, manufacturer at our choice (closed lighting system) License plate lighting Rear lights (LED) under the rear container support, beam of light to the rear Rear lights (LED) at the very front, under the stop, beam of light to the rear Side marker lights (LED), flashing (all SIDE lights flash), attention! Possible problems with tractor units! 9 (min.)-pole cable as connection front-rear (min.) Position lights (LED) mounted on a separate holder (not attached to the lamp) Bwsdpfx Abszir Ipelsr Position of position lights: Mounted on the underrun protection (if there is a kink to the rear, the UFS will not be pinched) Position light (LED) at the

Condition: used, empty load weight: 12,640 kg, maximum load weight: 28,360 kg, overall weight: 41,000 kg, first registration: 07/2023, next inspection (TÜV): 01/2027, loading space length: 9,900 mm, loading space width: 2,550 mm, loading space height: 910 mm, loading space volume: 22 m³, suspension: air, tire size: 235/75 R 17.5, color: other, mileage: 86,347 km, gearing type: other, front tire size: 235/75 R 17.5, driver cabin: other, emission class: none, Available for rent from 4 weeks onwards – immediate availability – contact O. Schinke. Rent – please contact Mr. Schinke. Platform length 3,800 mm, loading length 9,400 mm, loading width 2,550 mm, access ramp 1,300 mm, Rear loading ramps 2950 x 1,700 x 900 mm, access angle approx. 11 degrees, hydraulic ramp lift, ramp hydraulically adjustable, Bjdpfxszhknro Ablswr Lubrication aid, Smart Board, loading platform extension, Spare wheel holder, including spare wheel, storage box, 1 front support: telescopic support, aluminum alloy, for coupling, 2 foldable rear support legs with spring holder, to operate the hydraulic components, a suitable truck hydraulic system with forward and return lines is required (not included in the scope of supply). Also available for long-term rental! Contact us – we will provide you with our individual offer. * ABS * Axle steering on the 2nd and 3rd axles * Lateral impact protection * Rubber-metal pads on the loading ramps * Plastic toolbox * Single lift axle * Platform side panels * Hydraulic ramp lift * Ramp hydraulically adjustable * Spare wheel holder * Rotating beacon * SAF axles * Smart Board * Supports * Warning package * Central lubrication system We explicitly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is without guarantee; subject to changes, prior sale, or errors. We strongly recommend and offer an inspection and examination so that no false impressions arise about the condition and suitability with the buyer. Inspections and examinations are possible at any time by appointment and are expressly desired. We will take care of all formalities and hand over the vehicle with the desired transport license plates for an extra charge. The images have been partially edited and are only for initial viewing; if you are interested, please contact us and request current images.

Condition: excellent (used), CATALOG NUMBER 7099 TECHNICAL DATA - Engine power: 132 kW - Shaft diameter: 65 mm - Shipping dimensions (L/W/H): 120x80x700 mm - Engine dimensions (L/W/H): 550x1050x700 mm - Weight: 630 kg ADVANTAGES Bwsdpfezhu T Eox Ablor – Used engine – Very good condition Net price: 10,900 PLN Net price: 2,590 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: used, mileage: 145,207 km, power: 346 kW (470.43 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Retarder, fifth wheel height 1160 mm, air conditioning, Climatronic, auxiliary water heater, 4 kW, MAN radio with SD card, 7 inches, MAN sound system, hydraulic tank 181 liters, no radio, two-circuit tipping hydraulics with high and low pressure, pivoting arm, fifth wheel coupling JOST JSK 37 C, 2 inches, 150 mm overall height of the fifth wheel coupling, 575 mm fifth wheel center distance from the center of the last axle, connections converted to HYVA system (07/23). Bwodpfx Ask Amx Rsbljr

Condition: used, mileage: 293,918 km, power: 375 kW (509.86 HP), first registration: 07/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Standard extended warranty for the powertrain for the 3rd year of operation up to 450,000 km. Hydraulic tipping system retrofitted in 08.22. Safety package, interior lighting package, EBS, full brake assistant, MAN EasyStart, LED lighting, electric glass sunroof, preparation for 2 cameras, one linked to reverse gear, high beam assistant, ASR, lane change assistant LCS and turning assistant, driver alertness system, MAN Media System Navi Advanced 7'', MAN Sound System Advanced with subwoofer, navigation map Europe + Russia, RIO box. Saddle plate height 40 mm, JOST JSK 42 K0 2'' fifth wheel coupling, fifth wheel coupling height 150 mm, fifth wheel distance 575 mm. Bsdpfx Ajzfd S Sjbljwr

Condition: good (used), Year of construction: 2018, functionality: fully functional, TAWI SA 350-2 & VM 120 manipulator in good condition: Year of manufacture: 2018 Vacuum lifter capacity: 40 kg Column height: 360 cm Outrigger length: 400 cm Includes wall bracket for the vacuum pump Bwedozpwhuopfx Ablor One rubber foot on the suction cup is missing Shipping is possible after consultation. #8551

Condition: used, Radial fan, fan, Dahlander electric motor, three-phase motor with 2 speeds, 1.6 kW + 6 kW, BLECHER type 132 S4 / 2 For exhaust, cooling, or ventilation Fan impeller diameter: Ø 400 mm Fan impeller width: 175 mm Shaft diameter, motor shaft: Ø 38 mm Bedpfx Abezinyhsljwr Motor design: Dahlander star / double star Motor speed: 1440 / 2870 rpm Number of poles: 8 / 4 Motor power: 1.6 / 6 kW Mains connection: 400 volts, 50 Hz - Dahlander three-phase motor with 2 speeds - Fan impeller made of metal - Fan cover made of metal, Ø 465 mm - Electric motor with standard foot flange, mounting holes Ø 11.5 / hole spacing 215 x 140 mm Space requirement L x W x H: 570 x 465 x 465 mm Weight: 57 kg Good condition 2 units available, price per unit.

Condition: used, Three-phase motor, electric motor Bodpfx Aodwlqhsblswr -Power: 7.5 kW -Speed: 1440 rpm -Shaft: Ø 32 x 80 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 480/325/H301 mm -Weight: 72.5 kg

Condition: good (used), three-phase motor, electric motor Bwedpfxod E Tfrj Abljr -Handover: in current condition as viewed -Note: the base of the engine has been welded once -Power: 52/143 kW -Speed: 1485/2970 rpm -Shaft conical: Ø 70 to 60 mm 125 mm long -Design: B3 -Protection class: IP 54 -Dimensions: 1130/920/H630 mm -Weight: 876 kg