Used Alfa Laval Pump Up To 25.000 L/H for sale (94,088)

Condition: good (used), Year of construction: 2023, Alfa Laval LKH-UP70 Centrifugal pump Dodou N Hz Sjpfx Adrecn Serial: 298034 2023, Stainless centrifugal pump, 22Kw motor, 3Ph

Condition: used, Year of construction: 2003, Capacity: up to 25.000 l/h Dcedpfx Adez Iclmoren

Condition: good (used), Year of construction: 2017, Item: LC-10549 – Alfa Laval pump LKH70-110kW Alfa Laval LKH-70 Centrifugal Pump – 110 kW Used Alfa Laval LKH-70 sanitary centrifugal pump, suitable for high-capacity applications in the dairy, food, and beverage industries. The pump is equipped with a large Ø280 mm impeller and a powerful 110 kW motor. Technical data: Manufacturer: Alfa Laval Type: LKH-70 Year: 2017 Serial No.: 215309 Motor power: 110 kW Dedpfxjzymx Dj Adrscn Frequency: 50 Hz Impeller diameter: Ø280 mm Inlet: approx. DN100 Outlet: approx. DN80 Maximum flow according to Alfa Laval performance curve: up to approx. 260 m³/h, depending on the required head and product characteristics. CE marked Hygienic stainless-steel design Suitable for pumping milk, dairy products, water, and other low-viscosity food products. Original Alfa Laval performance curves are available. Machine located in Denmark and available for sale.

Condition: used, - Flat bottom tank with 2% slope - Brand : ALFA LAVAL - Total capacity : 30200 liters - Material : 316 L stainless steel - Interior finish : Cold rolled - Exterior finish : Cold rolled - Temperature controlled ROOF - Conical - 1 off-center chimney at the front Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 - 1 connection for level sensor BOTTOM - 2% sloped plate with drain - 1 total drain valve with plug DIMENSIONS - Diameter : 2800 mm - Total height : 6000 mm - Ferrule height : 4800 mm - Conical upper dome : 500 mm - Chimney : 300 mm Dedpfxjw Ngqts Adrjcn

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Cream Pasteurization Line Alfa Laval / Tetra Pak Cream Pasteurization Line | Piston Pump, Buffer Tank, Flowmeter, Pasteurizer Complete cream pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with high-quality pumps, valves, flowmeters, and control cabinets. The line is designed for hygienic and efficient cream pasteurization in the dairy industry. Capacity: 35,000 liters/hour Main components of the line: 1. Circumferential Piston Pump Manufacturer: Alfa Laval Type: DURACIRC 73 Serial Number: E256143 Year of Manufacture: 2021 Dimensions: 1600 × 600 × 800 mm Included: various valves and stainless steel filter housing 2. Stainless Steel Buffer Tank Tank dimensions: Ø 1100 × 1700 mm Total dimensions: Ø 1200 × 2900 mm 3. Alfa Laval Valves, Type: Unique SSV (6 pcs.) High-quality single seat valves for food applications 4. Flowmeter Manufacturer: Endress + Hauser Model: Promag P / Promag P Dimensions: 200 × 200 × 350 mm High-precision flow measurement for food-grade liquids 5. Centrifugal Pump Manufacturer: LKM Type: LKH 20/155 Power: 5.5 kW Production Number: 20-02319 Dimensions: 700 × 380 × 400 mm Stainless steel construction, suitable for CIP operation 6. Valve Manufacturer: Armaturen AG Type: MA9.31A6 5S Po Dimensions: 600 × 400 × 400 mm Dedpfx Adsxtu Ugorscn 7. Cream Pasteurizer Manufacturer: Alfa Laval / Tetra Pak Type: C10-SH Serial Number: 30104-38526 Year of Manufacture: 2003 Capacity: 1311 liters Operating parameters: Operating pressure (PS): 0 / 20.0 bar Test pressure (PT): 28.6 bar Temperature range (TS): 0 / 130 °C Dimensions: 5000 × 800 × 2200 mm High-efficiency heat exchanger system ensuring stable pasteurization 8. Centrifugal Pump Manufacturer: Pomac Type: CP29068/230 X 15 Serial Number: 22 818 Year of Manufacture: 12/2011 Capacity: 45 m³/h Power: 15.0 kW Dimensions: 950 × 400 × 500 mm 9. Nocado Valves (5 pcs.) Process valves for food applications 10. Control Cabinets Manufacturer: Eldon and IPBE Dimensions: 400 × 230 × 770 mm 1000 × 300 × 1000 mm The Alfa Laval / Tetra Pak Cream Pasteurization Line is a complete industrial solution with a capacity of up to 35,000 l/h, designed for high hygiene, precise process parameter control, and maximum reliability. Ideal for dairies, cream and milk fat producers.

Condition: used, Machine: ALOWAG FZU 20A Pump up to 25.000 l/h Dsdpfx Adoz Iatzjrscn

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) Djdpfx Adog N Db Hjrscn 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: ready for operation (used), ALFA LAVAL VELVES COMPLETE PROCESSING SMART UNIT WITH CONTROLL BOX YOM 2015 30 VELVES IN COMPLETE EXCELLENT CONDITION The unit is designed for the automatic safe separation of product flows, the management of different product streams, and the safe cleaning of one line without halting production on the other. Dsdpfx Ajz Hwhtodrjcn

Year of construction: 2012, condition: excellent (used), Alfa Laval Centrifugal pump Type LKH 85/240, 25,0 kW , Dcedohck S Espfx Adrsn Stainless Steel. Used! Good condition! Inlet: 6" - Outlet: 6"

Condition: good (used), Alfa Laval LKH70 Centrifugal pump Serial: 49700 Djdju N Hxdjpfx Adrjcn Stainless centrifugal pump, 22Kw motor, 3Ph

Condition: good (used), Alfa Laval LKH70 Centrifugal pump Serial: 39398 Dodpfx Adeu N Hv Nsrocn Stainless centrifugal pump, 30Kw motor, 3Ph

Condition: good (used), Alfa Laval LKH70 Centrifugal pump Serial: 83321 Dodpfxou N Hybs Adrocn Stainless centrifugal pump, 30Kw motor, 3Ph

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Buttermilk Pasteurization Line Complete buttermilk pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with a buffer tank, circulation pumps, process valves, flowmeter, and control cabinet. The system is designed for hygienic thermal processing of buttermilk in dairy plants. Capacity: 25,000 liters/hour Main components of the line: 1. Siersma Scheffers Stainless Steel Buffer Tank Serial number: Karnemelk Year of manufacture: 1995 Capacity: 1,000 liters Overall dimensions: Ø 1100 × 3000 mm Material: stainless steel (s/s) 2. APV Valves (4 units) High-quality process valves for food applications 3. Pomac Centrifugal Pump, type: CP19555 / 165 x 10 Serial number: 20080 Year of manufacture: 2007 Capacity: 30 m³/h Power: 5.5 kW Dimensions: 700 × 350 × 450 mm 4. Endress + Hauser Flowmeter, model: Promag H / Promag 300 Dimensions: 350 × 200 × 200 mm Provides precise measurement of liquid food products 5. Samson Valve Dimensions: 560 × 300 × 300 mm Application: flow and pressure regulation in process systems 6. Alfa Laval / Tetra Pak Buttermilk Pasteurizer, type: C8-K8M Serial number: 30107-33855 Year of manufacture: 2012 Capacity: 559 liters Operating parameters: PS: 16.0 bar PT: 22.9 bar TS: 120 °C Dimensions: 3200 × 550 × 1850 mm High-performance heat exchanger system optimized for buttermilk processing Djdpfx Adjxtvfterocn 7. Hovap Centrifugal Pump, type: HP-5032/170 Serial number: 33740 Capacity: 35 m³/h Power: 7.5 kW Dimensions: 700 × 320 × 550 mm 8. IPBE Control Cabinet (s/s) Purpose: control and supervision of the buttermilk pasteurization line Dimensions: 620 × 230 × 770 mm The Alfa Laval / Tetra Pak buttermilk pasteurization line with a throughput of up to 25,000 l/h is a complete, integrated system for the thermal processing of dairy products. Use of components from Alfa Laval, Tetra Pak, Pomac, Hovap, Endress + Hauser, and APV ensures high reliability, durability, and process quality.

Condition: used, Year of construction: 1986, Alfa Laval Drehbürstensieb Dcsdpfxsz Ia D To Adrsn

Condition: used, Year of construction: 2005, Machine: ALOWAG Pump 25.000 l/h Dsdpfx Adez Icvxsrecn

Condition: ready for operation (used), 30 kw main drive 3250 rpm 1.2 kg /dcm. exelent conditions Dcedpex Aurkefx Adrsn

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Dcodpjvhctwefx Adrsn Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: repair required (used), Year of construction: 2017, functionality: not functional, AS-07251-Alfa Laval Clarifier Module 10 m3/h ALFA-LAVAL PURE SOX (SWPX 810 SGV-34CGL) CLARIFIER MODULE, 316SS. Capacity min. 10,000 L/H Offering 4 identical units INCOMPLETE! Only for spare parts (Machine without bowl) Dsdpfsw Ap I Ajx Adrscn Max. bowl speed 7200 RPM, rated at 10,000 LPH, bowl volume 15 L, sludge capacity 9.4 L, liquid discharged under pressure, solids discharge pump with cyclone tank, 35 kW motor 460/3/60/1728 RPM, Pure SOx scrubber, unitized on a common skid with all valves, piping, control panel, tools, spares, and manual Year of Manufacture 2017

Year of construction: 2026, condition: new, functionality: fully functional, power: 200 kW (271.92 HP), load capacity: 1,300 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding Dcjdpfxjyy Rk Hj Adrsn • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: excellent (used), ALFA LAVAL CAF 2H/1 – Double-Head Aseptic Filler – Stainless Steel ALFA LAVAL CAF 2H/1, a 2-head aseptic filler, designed for the sterile filling of liquid, semi-liquid, and viscous food products into large-format aseptic packaging within industrial processing lines. The dual filling head configuration allows operation with two stations, facilitating process continuity and increasing operational flexibility. This type of equipment is especially suitable for packaging pre-sterilized products that must be maintained under aseptic conditions until sealing. Its stainless steel construction, protected filling zones, and automatic control system allow it to be integrated with sterilizers, aseptic tanks, and complete processing lines for fruits, tomatoes, and other food products. MAIN FEATURES -Manufacturer: ALFA LAVAL -Model: CAF 2H/1 -Type: Automatic aseptic filler -Number of heads: 2 -Dual filling station configuration -Product filling under aseptic conditions -Designed for pre-sterilized product -Automatic process control system Dcodpfx Adjzxk Tperen -Sanitary product circuits -Construction primarily in stainless steel -Integrated process instrumentation and valves -Central control panel -Closed filling zones with safety guards -Roller conveyors for handling the packaging -Designed for industrial operation -Integrable into complete aseptic processing lines PROCESS The ALFA LAVAL CAF 2H/1 receives the product that has already undergone sterilization and guides it to the filling heads, maintaining the required hygienic conditions during filling. The packaging is positioned at the corresponding station and connected to the filling system, with the product transferred within a protected and controlled zone. Once filling is complete, the packaging can be removed and replaced with another to continue production. The 2-head configuration is particularly useful for maintaining an efficient workflow during packaging changeover operations. APPLICATIONS Especially suitable for processors of tomatoes, fruits, and vegetables, as well as manufacturers of purees, pulps, concentrates, juices, and sauces that need to package sterilized products for storage or distribution. Depending on the installed configuration, it can be used with aseptic bags in drums, bins, or other industrial containers. It can be integrated with aseptic sterilizers, buffer tanks, sanitary pumps, CIP systems, and UHT lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 1996, Item: AL-010188-Alfa Laval Separator MRPX314HGV-74C Alfa Laval MRPX 314 HGV-74C Milk Clarifier Separator Pre-owned Alfa Laval MRPX 314 HGV-74C self-cleaning clarifier separator in stainless steel construction. Manufactured by Alfa Laval Separation A/S, Søborg, Denmark. Complete unit in good used condition – ideal for clarification of milk or other low-solids dairy liquids. Technical Details Type: MRPX 314 HGV-74C Manufacturing No.: 2969923 Product No.: 881007-01-00 Bowl speed: approx. 8,000 rpm Drive motor: approx. 11 kW Operation: self-cleaning (automatic sludge discharge) Material: acid-resistant stainless steel (AISI 316 L) Bowl volume: approx. 6 L Capacity: up to 10,000 L/h for milk clarification Design: hermetic bottom feed with paring-disc liquid outlet Features • Continuous separation of milk and whey with minimal product loss • Gentle, hermetic feed system – prevents air entrainment and foaming • Automatic solids discharge system • Includes complete bowl assembly: - Top Part No.: 538544-80 - Bowl No.: 537872-80 - Bottom Part No.: 537503-64 Dcjdpfxsxqqqle Adron Condition Machine disassembled, cleaned, and stored indoors in Denmark. Available for inspection by appointment. Price Price on request (EXW Denmark)

Condition: used, Year of construction: 1994, System: Decanter / centrifuge, used Manufacturer: Alfa Laval Model: ALDEC 406 Mach. No. 512-0006.01 Year of manufacture 1994 Djdevz Dddjpfx Adrecn Maximum drum speed 4000 l/min Drum inner diameter

Condition: good (used), Name: Replacement Rotor for Alfa Laval Manufacturer: Alfa Laval Type: ALDEC 506 Year built: - Inner diameter drum: 450 mm Interior drum length: 1.240 mm Material: Stainless steel Dimensions: L 1.930 x W 450 x H 450 mm Empty weight: 1.000 kg Technical doc.: No Dcsdpeza Dt Tjfx Adron Condition: Used-good Price: By request

Condition: good (used), power: 5.5 kW (7.48 HP), Item: LC-5833 - Centrifugal pump - LKH-20/155SSS Djdozv R Iuepfx Adrjcn Alfa Laval - Centrifugal Pump LKM Type: LKH-20/155 SSS, 5.5 kW

Condition: used, ALFA LAVAL Separator Type: MRPX 318 HGV-74C / 88-1005-01-00 Manufacturing No.: 2969862 Worm Wheel Shaft: 1420–1500 rpm Tachometer: 1420–1500 rpm Revolution Counter: 110–125 rpm Alfa Laval MRPX 318 HGV-74C self-cleaning hermetic separator, complete stainless steel unit in good condition (dismantled). Dodexqm Rnjpfx Adrjcn Manufacturing No.: 2969862 Product No.: 88-1005-01-00 Technical Details: - Bowl diameter: approx. 318 mm - Speed: approx. 8,000 rpm - Motor: approx. 22 kW - Capacity: approx. 15,000 – 25,000 L/h (depending on product) - Worm wheel shaft: 1420–1500 rpm - Tachometer: 1420–1500 rpm - Revolution counter: 110–125 rpm - Self-discharging (HGV type) Ideal for milk, whey, juice, or other liquid-solid separation in the dairy or food industry. Clean, complete machine ready for operation or integration into a production line. Location: Denmark Condition: Used / tested Price: Upon request Inspection: Possible by prior arrangement