Used Amboss + Langbein Gravimetric Dosing Station for sale (6,168)

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Fpsdpfx Aash Akm Tegjh

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 503382, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, total length: 1,300 mm, total width: 650 mm, total height: 1,750 mm, overall weight: 150 kg, number of chambers: 2, year of last overhaul: 2023, We are offering this ready-to-use Amboss Langbein D2x8 dry air dryer with cooler, manufactured in 2006. Fpsdpfx Aozarqmoagjh Manufacturer: Amboss Langbein Model: D2x8 Year of manufacture: 2006 Condition: ready for use Type: Dry air dryer with industrial cooler Hopper volume: 2 x 50 liters Flow rate: 2 x 15 kg/h Drying temperature: 30-160 degrees Celsius Dry air volume: 80 m3/h - 180 m3/h If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Key operating parameters and performance: Drying temperature: from 30 °C to 160 °C (adjustable via a precise 3-point controller). Dew point: stable at approximately -60 °C, ensuring thorough drying of hygroscopic materials. Fedpfx Aey Ud T Rsageph Dry air flow rate: from 80 m³/h to 180 m³/h for devices in the compact series. Pre-drying time: reduced to only 3–4 hours for standard materials. Throughput: from 4 kg/h to 70 kg/h (values measured for Polyamide PA max).

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2.23024635/4097, overall weight: 15 kg, type of input current: AC, power: 1 kW (1.36 HP), tank capacity: 10 l, Motor power: 1 kW Supply voltage: 230 V AC (+/- 10%) Frequency: 50–60 Hz Container volume: approx. 10 liters Conveying capacity: approx. 10–120 kg/h (depending on material and distance) Required compressed air connection: approx. 5 bar (for filter cleaning/control) Fpedpfxjy Hkyhs Aagsh Device weight: approx. 15 kg Material: stainless steel

Condition: good (used), functionality: fully functional, conveyor belt length: 3,600 mm, conveyor belt width: 510 mm, conveyor belt speed: 70 mm/s, total length: 2,800 mm, total width: 1,300 mm, total height: 1,650 mm, overall weight: 250 kg, discharge height: 1,360 mm, power: 0.12 kW (0.16 HP), motor manufacturer: Getriebemotor TP63A4, Equipment: type plate available, Manufacturer: Amboss + Langbein Year of manufacture: 2019 Overall dimensions (LxWxH) in mm: 2,800 x 1,300 x 1,650 Width including side panel in mm: 580 Width including drive in mm: 1,300 Side height in mm: 210 / 160 / 260 Total conveyor length in mm: 3,600 Conveyor length, horizontal in mm: 900 at bottom, 1,000 at top Conveyor length, vertical in mm: 1,600 Conveyor width in mm: 510 Belt type: Plastic slats, link belt Belt width in mm: 570 Cleats (cleat height/cleat spacing) in mm: 50 / 290 Substructure: Rollable Height adjustable from: 320 mm to: 460 mm Sliding surface: metal Inlet height in mm: max: 320 min: 460 Outlet height in mm: max: 1,220 min: 1,360 Drive: head drive Motor type: gear motor TP63A4 Motor data: 0.12 kW Motor position: right Conveyor speed in m/s: 0.07 Net weight in kg: 250 Fpsdpoylvgpefx Aagoh Special features: Cross belt attached centrally under the outlet, left and right run Condition: used / fully functional Function test: OK

Condition: used, Amboss + Langbein Industrial Drying Oven Amboss + Langbein WTS 20 3B – 80°C – 400 V – 5 kW For sale is an industrial drying oven / heat drying cabinet from the manufacturer Amboss + Langbein, model WTS 20 3B. This unit is ideally suited for drying, heating, and tempering workpieces, components, or materials in workshop, industrial, or laboratory environments. The drying oven features digital temperature control, a safety thermostat, and a robust industrial design with multiple stainless steel shelves. Thanks to its castors, the unit is easily movable within the facility. Technical specifications: Manufacturer: Amboss + Langbein Model: WTS 20 3B Year of manufacture: 04/2010 Operating voltage: 400 V Frequency: 50 Hz Power: 5 kW Fjdex Uz Rtopfx Aagsph Max. temperature: approx. 80°C Temperature control: digital Safety thermostat included CE marking Dimensions / Weight (approx.): Height: 170–180 cm Width: 80–90 cm Depth: 70–80 cm Weight: 180–220 kg Condition: used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: good (used), Year of construction: 2014, functionality: fully functional, conveyor belt length: 2,510 mm, conveyor belt width: 415 mm, conveyor belt speed: 60 mm/s, total length: 2,040 mm, total width: 660 mm, total height: 1,265 mm, overall weight: 110 kg, discharge height: 575 mm, power: 0.12 kW (0.16 HP), TAF item number: 1000005779 Manufacturer: Amboss + Langbein Year of manufacture: 2014 Overall dimensions (LxWxH) in mm: 2,040 x 660 x 1,265 Width incl. side panel in mm: 790 Width incl. drive in mm: 660 Side height in mm: 220 Conveyor length, total in mm: 2,510 Conveyor length, horizontal in mm: 1,310 Conveyor length, vertical in mm: 1,200 Conveyor width in mm: 415 Belt type: Plastic hinged plate belt and plastic cleats Belt width in mm: 430 Cleats (cleat height/cleat spacing) in mm: 30 / 485 Substructure: Rollable / height-adjustable Sliding surface: steel Inlet height in mm: max: 575 min: 325 Outlet height in mm: max: 1,460 min: 1,210 Drive: head drive Motor type: gear motor, TPG3A4N Motor data: 0.12 KW Fpjdpfx Ajxtaaueagsh Conveyor speed in m/s: 0.06 Net weight in kg: 110 Special features: Includes cycle control, continuous operation possible, automatic stop in case of belt blockage Condition: used / fully functional Function test: OK

Condition: used, Year of construction: 2014, Amboss + Langbein dryairdryer D 4 x 1 mit 4x 1 Liter tanks year 2014 price: 6.450€ Fpsdpst Hgvpefx Aagjh Contact: Mr. Rainer Eckerle

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Fedpsx Eifksfx Aagjph Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: excellent (used), Epson G10-854SR Robot Assembly Station and Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 KK+SW Assembly Area, and 3.3 Front Assembly Area. (KK = Heat Sink, SW = End Wall Bracket) St. 3.1: Dispensing Area: - A workpiece carrier (WT) with mounted chassis and PCBs enters the dispensing area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. Fjdpfsibx S Njx Aageph - The X-Y-Z handling moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling moves to the rest position, and the WT is placed back on the belt. - Continued transfer to the KK+SW assembly area (provided there is no WT in the mounting position). St. 3.2: KK+SW Assembly Area: - A WT from the dispensing area arrives in the KK+SW assembly area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. The chassis side walls of the partially assembled unit are aligned. - KK tray and SW tray positioning occurs simultaneously. - A stack of 12 KK trays and a stack of 12 SW trays are manually placed on their respective infeed conveyors outside the safety enclosure. - The two safety shutters are opened, and the loaded tray stacks move into the gripper position of the respective stacker. - The safety shutters are closed again. - The respective grippers pick up the corresponding tray. - The tray is separated using the Z-axis and transported upward (above the normal pick-up height). - For centering and stabilization, a centering support is positioned beneath each tray using X-axis handling. - With the stacker's Z-axis, the respective tray is placed on the centering support. - The trays are ready for component pick-up. - With the multi-gripper on the SCARA robot, the KK is picked up from the tray and placed in an intermediate position as an alignment aid (to achieve exact pick-up positions for assembly). - The KK is scanned, picked up again, and if the scanner result is OK, mounted onto the WT. - Any KK that is not OK is placed in a reject box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and mounted onto the WT. - Assembly continues in the front assembly area. Technical Data: Design: SCARA (4-axis robot) Nominal Load Capacity: 5 kg, Maximum: 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability (Horizontal): +/- 0.025 mm Repeatability (Vertical, J3): +/- 0.01 mm Repeatability (Orientation, J4): +/- 0.005° Maximum Working Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User Wiring (electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter: 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cables: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator Fpodpfx Aaju D E A Djgeh The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, DOPAG Micromix Fjdpfx Aaexcgpzsgeph The devices in the micromix series are solvent-free, compact, pneumatically driven dosing and mixing units with piston pumps. They are used for processing multi-component, low- to high-viscosity media based on, for example, epoxy, polyurethane, and silicone, with a mixing ratio from 100:100 to 100:4 in spray or continuous flow operation. The materials can be both abrasive and filled.

Condition: defective spare-parts repository (used), Year of construction: 2015, The equipment is incomplete and is being sold for parts. Fjdpfeyhb S Njx Aagsph

Condition: ready for operation (used), Anvil & Stand Length x Width x Height 1000x350x360 mm (dimensions of the anvil) Weight approx. 300 kg Fjdpfszcqpyjx Aagoph Errors and omissions excepted.

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t Fpodpevzxpuefx Aagoh ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, Year of construction: 2019, functionality: fully functional, 400 kVA transformer station, year of manufacture 2019, station UK220-2.9X, transformer DOTUL400/10, year 2013, oil-cooled transformer, 10kV ±2x2.5%/400V, with HV plug-in bushings AK, with LV porcelain bushings, pointer thermometer. Fpodpfjxzq Hbsx Aagjh

Condition: used, Number of sanding units 2 st. sanding width ca. 450 mm mm Fpedpfx Aaolfdxmjgjh spindle diameter 45/35 mm Double grinding block, long leg with left side

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm Fpjdpfjvuuknsx Aagjh ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 4,900 mm, total width: 1,500 mm, total height: 2,300 mm, overall weight: 1,500 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O., Type: PAK 5.0, Machine number: 457, Year of construction: 2015, Voltage 400 V, 3 Ph, Power 7.5 kW, Pressure 6-8 bar, Fsdpfx Aov Abm Eoageph Weight: 1500 kg, 2-track cup denester, Dimensions: 4900 mm x 1500 mm x 2300 mm.

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Fpedoyil A Sjpfx Aagjh Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm

Condition: used, KMA Heat Exchanger and Pumping Station Fpodpoym Dx Ajfx Aageh

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. Fpedpeyb Tw Rjfx Aageh AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,150 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O. Type: DOSOWNIK 2G, Number: 439, Year of construction: 2014, Voltage: 400 V, 3 Ph, Power: 2.5 kW, Pressure: 6-8 bar, Weight: 1150 kg, Fpedpsvz H N Nsfx Aagjh Dimensions: 4200 mm x 1300 mm x 1800 mm.

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: foot pedal Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Fsdpfsx R Dh Hex Aagoph Construction according to GMP rules Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g Fpjdex R Df Sepfx Aagoh   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available