Used Amtech Ultrasonic Welding Machine for sale (66,582)

Year of construction: 2010, condition: good (used), functionality: fully functional, The Branson ultrasonic welder is used for joining plastic parts without the use of joining material. Frequency 20 kHz, power 1000-2000W, voltage 230 V AC, stroke 100 mm Kdsdovt Sc Ejpfx Afvel LxWxH: 400 x 500 x 1200 mm

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Frequency: 35 kHz Power: 1000 W 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Kdodpfx Afsyimqwjvol Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg Kdodoy A Iftjpfx Afvjl

Condition: good (used), functionality: fully functional, Ultrasonic welding unit BRANSON, model 8.200 Kodpfx Asylpqbofvjdl

Year of construction: 2013, condition: excellent (used), Ultrasonic welding system Manufacturer: KLN Stock number: Year of manufacture: 2013 or 2009 Type: PXO number P600031440 MXO number M60413293 Equipment: the system consists of two stations, Ksdpfevxppaox Afvsdl Individual sale possible Price: EUR 5,000 per station Price including 19% VAT: EUR 5,950 per station

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed -Manufacturer: Nucleus, lowering unit - flatbed for ultrasonic welding machines -Eco FR360102 -Servomotor: NuDC42I25R-1000 Voltage 24 V -Number: 5x lowering unit available -Price: per piece -Dimensions: 340/240/H130 mm Kjdpfx Aoxrz Taefvodl -Weight: 4.5 kg/pc.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column Ksdoxzb E Ijpfx Afvsdl -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Number: 4x lowering unit available -Price: per piece -Dimensions: 250/220/H85 mm -Weight: 2.3 kg/pc.

Condition: used, functionality: unexamined, machine/vehicle number: Ultraweld-40, input voltage: 220 V, Used Amtech Ultraweld 40 ultrasonic metal welder with parts and controllers Manufacturer: Amtech Model: Ultraweld-40 (R4A actuator) Includes manual Kdedpfx Aox A A Exofvel

Condition: not inspected (used), functionality: unexamined, total height: 1,000 mm, total width: 800 mm, total length: 1,100 mm, overall weight: 150 kg, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to collecting the items within the period from 23/06/2026 to 26/06/2026! Auction of an ELEKTRA BECKUM electrode welding machine & an oxy-fuel welding unit! MACHINE DETAILS Dimensions (L x W x H): 1,100 x 800 x 1,000 mm Weight: 150 kg Note: The gas cylinders pictured are not included in the scope of delivery. Kdedpfx Aey D Nqasfvol External reference: 17

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Kjdsxrb Tgepfx Afvedl Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: PS1/9173/9169/2, type of input current: three-phase, input voltage: 400 V, overall weight: 775 kg, electrical fuse: 105 A, compressed air connection: 5 bar, This Schlatter PS 130 is a robust, industrial spot welding machine renowned for its reliability in metal welding applications. Ksdpfx Ajy Snycofvjdl

Condition: used, 1 pipe welding machine with rotary table/indexing head SDT-0.5, capable of welding pipes with a diameter of up to 100mm and a length of 1000mm, custom-built, mobile Color: as shown in the pictures, according to the images and on-site inspection Dimensions L/W/H: 190x180x80cm Condition: used Ksdoy Thlhopfx Afvedl

Condition: used, Welding edge former INDUMASCH SIEGEN type V 12 Machine. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45° Working speed approx. 3 m/min. Motor power 2 kW Kdsdpfx Aorz Tupjfvjl Mains connection 400 Volt, 50 Hz - Forward / return - Built-in guide roller for 45° bevel angle - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm weight 75 kg good condition

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Kdsdpfxjwa Uwdj Afvsl Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Stepless adjustment range Open circuit voltage approx. 50 V Open circuit voltage approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function Ksdpjyv H Eljfx Afvjdl - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Throat 500 mm Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Electrode arm Ø 45 mm Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling Ksdpfx Ajit Rq Hofvjdl - Foot pedal operation - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Very good condition

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Kdsdpfxohpf Iye Afvel Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder Ksdpoycv Sasfx Afvjdl - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: used, Year of construction: 1977, This SCHLATTER industrial resistance welding system, type GPu 300/250, will be auctioned off in our complete online auction "Site Clearance - Fire trucks, trailers, containers, transport boxes, paternoster storage system." Further details on the machine: Kdsdpsy Takvefx Afvjl Industrial resistance welding system from the Swiss manufacturer Schlatter. SCHLATTER welding system, type GPu 300/250, serial no. S1.3644.1095, year of manufacture 1977; primary voltage 380 V / 3-phase / 50 Hz, apparent power 196.87 kVA, welding current 230 A / 795 A, cooling water requirement 30 l/min at 4 bar. As shown in the pictures, functionality not tested. Does not include any other items shown in the pictures.

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Type: RNF-65 Kjdpjwq Hp Tsfx Afvodl Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Designed for mobile use on a 3000 mm gauge Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) There are (currently) no dimensions for this machine. Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: good (used), Year of construction: 2014, Manufacturer: MIBA Type: LNF65 Kdedpfxewq Hqke Afvel Control: SIEMENS 840D Year: 2014 Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, working range: 500 mm, machine/vehicle number: RC-1-0505, CNC Stud Welding Machine RC-1-0505 consisting of: 2-axis system 500 x 500 mm, motor-driven KAH100 welding head and automatic stud feeding system CDP-99 capacitor discharge (CD) welding unit Stud diameter: M3-M8; length range: 8-25 mm Weldable materials: steel, stainless steel, aluminium Fully enclosed housing with pneumatically operated safety door and additional light curtain safeguarding User-friendly control system The RC-1-0505 stud welding system stands out due to its high-quality equipment and a safety enclosure with protective panels and additional light grid. The system includes a CDP-99 stud welding unit using capacitor discharge technology, a fully automatic stud feeder, and a KAH100 welding head. The working area of the machine is 500 x 500 mm. The system is easy to operate and program, even for inexperienced operators. Welding positions can also be set via teach-in procedure using a crosshair laser and handheld control unit. Model: RC-Z-0505 NEW and unused Working area: X 500 mm x Y 500 mm, motor-driven; Z 150 mm, manual Kdjdpfx Afjy Stahevel External dimensions: L 1016 mm x W 1350 mm x H 1663 mm Travel speed: max 40 m/min Compressed air: 6 bar; storage tank for pressure fluctuations included Power supply: 380 V / 50 Hz, CEE 16 A connection, 2.5 kW

Condition: used, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, continuous power: 3,000 kW (4,078.86 HP), Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – State-of-the-Art Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precision laser welding: the Airtech Handheld Laser Welding System with 3,000 Watt capacity! Ideally suited for demanding sheet metal processing – efficient, safe, and highly versatile. Highlights and Features: - Output power: 3,000 watts for superior weld quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – ergonomically positioned for comfortable operation - Robust housing and intelligent internal structure for maximum service life - Touchscreen display for intuitive operation - Optional automatic multifunctional wire feeder - Safety features: three-color alarm, safety interlocks, safety mechanism against incorrect operation - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components meeting European standards Kdodey R I Tgepfx Afvjl Your Advantages: - Safe operation thanks to comprehensive safety mechanisms and alarm systems - Flexible applications, including automatic wire feeding and robot integration - Low operating costs and easy maintenance thanks to well-designed technology and durable components

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, welding current (min.): 5 A, welding current (max.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 Step Pulse Pre gas / Post gas Up slope / Down slope Start current / End current Elektrode option Steel + Stainless Steel weldable test welding possible Including 4 Meter SR17 welding torch, earht work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. Kdsdpfx Aoy Rqh Tofvel We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: MB 0484 / 2014, type of input current: three-phase, continuous power (apparent): 10 kVA, type of cooling: air, total width: 1,119 mm, total length: 2,595 mm, total height: 2,510 mm, overall weight: 1,700 kg, For sale is a capacitor discharge welding system (CD welding system) from the brand GLAMATRONIC, model GKS-S4/12-Q, manufactured in 2015. The system is in good condition and is suitable for industrial welding applications with high process reliability and precise energy output. The system has been regularly maintained and is immediately ready for operation. The control cabinets are equipped with additional air cooling. Technical data: Make / Type: GKS-S4/12-Q Year of manufacture: 06/2015 Rated voltage: 3 x 400 V AC / 50 Hz Control voltages: 230 V AC / 24 V DC Rated power: 10 kVA Welding energy: 4 kJ Kdodpfx Asy Rmk Djfvel Welding force: 12 kN Max. supply line fuse: 32 A Frame weight: approx. 1,700 kg Control cabinet weight: approx. 1,000 kg