Used Arbor Feeder For Planer for sale (7,535)

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 900 mm, feed rate X-axis: 40 m/min, overall weight: 900 kg, roll diameter: 35 mm, total width: 6,000 mm, total length: 2,500 mm, total height: 1,200 mm, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, height adjustment type: mechanical, roller diameter: 140 mm, transport height: 1,200 mm, transport length: 2,500 mm, transport width: 1,250 mm, input frequency: 50 Hz, power of feed motor: 1,500 W, This video demonstrates the feeder of a four-side planer processing an oak board. Pgodpfjyftgaox Amxot Technical specifications: Feeding speed: 5-60 m/min Minimum board length: 1.2 m Maximum board length: 6 m Minimum board width: 40 mm Maximum board width: 300 mm Minimum board height: 10 mm Maximum board height: 120 mm Number of feed rollers: 2 Feed drive power: 1.5 kW each Chain conveyor drive power: 1.1 kW Feeders can be equipped with chain conveyors featuring various numbers of chains, different chain spacings, and conveyor lengths to suit specific requirements. ARBOR also offers design and manufacturing services for sawmill and woodworking lines of any complexity.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,000 kg, roll diameter: 60 mm, total width: 6,200 mm, total length: 3,000 mm, total height: 2,000 mm, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, height adjustment type: mechanical, travel distance Y-axis: 1,200 mm, transport height: 2,200 mm, transport length: 6,200 mm, transport width: 2,400 mm, input frequency: 50 Hz, power of the servo motor: 3,500 W, Destacking device and feed table for four-side planners Podpfsv H R Dhox Amxjgt Fully automatic destacker and feed table Designed for sawing 2-edged and 4-edged cant Productivity - 120 m3 per shift (10 hours) Complete set: destacking device, feed table

Condition: new, functionality: fully functional, Year of construction: 2026, The wobbler feeder is a feeding system that delivers superior performance, especially when handling large, sticky, and moist materials. Its structure, consisting of rotating elliptical rods, creates a vibrating motion during material flow. This motion separates fine materials from larger particles and provides consistent feeding to crushers and screens. As a result, clogging is prevented and the overall efficiency of the plant is increased. Widely used in the mining, aggregate, and recycling industries, wobbler feeders are typically placed in front of primary crushers. This ensures that the material undergoes pre-screening in the initial stage. Its ability to operate without clogging, even with sticky and clayey materials, makes it an ideal solution for demanding conditions. Its mechanically simple design, ease of maintenance, and long-lasting performance keep operating costs to a minimum. With these features, wobbler feeders are a reliable choice for all plants requiring a continuous and balanced material flow. Wobbler Feeder Technical Specifications Body Liners: HARDOX 450 – 10 mm Feeding Capacity: 150 - 200 t/h Weight: 18.5 tons Dimensions: 4,000 x 1,000 mm Wobbler Motor: 14 x 3 kW, 1500 rpm, GAMAK brand Gearbox: Heavy-duty type Walking Platforms: Available Psdpfx Asxqcn Ajmxegt Steel Feet: Available Why Choose CONSTMACH Wobbler Feeders? CONSTMACH wobbler feeders stand out with their high-quality, durable materials, heavy-duty gearboxes, and ease of maintenance. Each one is designed to offer long-lasting, low-cost operation. HARDOX body liners provide maximum resistance to wear, while the adjustable design easily adapts to different material types. CONSTMACH is a trusted name in the industry for its production quality, engineering support, and after-sales service. Invest in a wobbler feeder with the CONSTMACH guarantee for the continuity and performance of your facility. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products designed to meet the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Item for sale: 1 x BDT VX 370 for the following machines: Canon imagePRESS V1350 incl. S-Bridge Condition: This is a brand-new unit in its original packaging Pjdpeyuuc Iefx Amxogt Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: like new (used), Feeder for four-sided planer VANHOLD, 0.55 kW Pgjdpsyq Hxmofx Amxot

Condition: excellent (used), Vibratory feeder with linear feeder and sound insulation by California Vibratory Feeders. 110 Volt, 50 / 60 Hz, 2.5 Amp. Was only used for a trial. Equipped with an integrated light barrier on the linear guide rail for switching off the vibratory bowl and an air nozzle for part separation. Pgsdsxrb S Nspfx Amxst

Condition: like new (used), functionality: fully functional, Hydraulic feeder type 814 300 80 m/min. Motor power: 5.5 kW Pjdpsyi Afmjfx Amxjgt Control panel Year of manufacture: 1991

Condition: ready for operation (used), hydraulic workpiece length: 300–3000 mm smooth speed adjustment weight: 130 kg power supply: 380V Podpfx Asyyy Sgomxjgt year: 2003

Condition: excellent (used), functionality: fully functional, Min./max. workpiece height: 15-100 mm Min./max. workpiece length: 500-2000 mm Pgsdpfxjzz Nhko Amxst Min./max. workpiece width: 25-230 mm Feed speed: 5-36 m/min

Condition: excellent (used), Max board width: 16 cm. Magazine height: 70 cm. Overall dimensions: Height 180 cm, width 60 cm, length 200 cm. Pgedpfx Aoy Avf Usmxjt

Condition: ready for operation (used), Pneumatic material feeding Feeder roller width: 40 cm Pedpfx Ajwigbasmxegt Material feeding from stack Stack height: 84 cm Maximum working width: 26 cm Total length: 240 cm Width: 42 cm Height without stack: 83 cm

Condition: excellent (used), functionality: fully functional, Pneumatic material feeding Feed roller width 40 cm Material feeding from a stack Stack height 84 cm Pgedpfx Aewhdm Rjmxot Maximum working width 26 cm Total length 240 cm Width 42 cm Height without stack 83 cm

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Ready to ship worldwide Podpfjw D Ev Eex Amxjgt More pictures and videos available upon request

Condition: excellent (used), functionality: fully functional, Pneumatic material feeding Feeder roll width: 40 cm Material fed from a stack Stack height: 80 cm Maximum working width: 26 cm Psdpfx Amowgb Amsxegt Total length: 180 cm Width: 42 cm Height without stack: 78 cm

Condition: new, Spare parts category: safety mat for CNC Allen Bradley Lignum 1600x 800 Brand: safety mat for CNC Allen Bradley Lignum 1600x 800 Model: safety mat for CNC Allen Bradley Lignum 1600x 800 Description: safety mat for CNC Allen Bradley Lignum 1600x 800 Allen Bradley Lignum CNC safety mat new, thickness: [value missing] series: 440-F, range: MatGuard, length: 1.5m, width: 1m, thickness: 16mm, Plastisol vinyl, IP67 Allen Bradley protective mat, length 1.5 m, width 1 m - 440F-M2030BYNN The Allen Bradley series MatGuard safety mat from Rockwell Automation is a safety device that detects human presence in hazardous areas. It can be connected to the control circuits of industrial machinery in hazardous environments, creating a protected area of 1.5 m (length) x 1 m (width). When the mat's detection surface senses a person, it sends a signal that shuts down the machine, preventing injury and increasing workplace safety. The durable vinyl material is resistant to bleach, acids, and other industrial chemicals, making it a suitable choice for use in demanding industrial settings. This mat is commonly used to restrict access to hazardous areas in factories. Features and advantages: • Hardened sheet steel construction increases durability. • 4-wire open and short-circuit detection system for enhanced electrical safety. • Can withstand a high static pressure of 4,500 psi (pounds per square inch) for use in heavy-duty applications. Standards and certifications: • CSA (Canadian Standards Association) • ISO13849-1 (International Organization for Standardization) • IEC/EN60204-1 (International Electrotechnical Commission) • TÜV (Technischer Überwachungsverein) Pjdpfxsz Eggvo Amxjgt Is this mat safe to use in damp or wet areas? IP67 rating CE certified TUV certified CSA certified cULus approved EN1760-1 EN954-1 ISO 13849-1 IEC/EN60204-1 ANSI RIA R15.06 ANSI/B11.19 AS4024.5 The mat is rated IP67 (ingress protection), meaning it is protected against dust and can be water-resistant for up to 30 minutes. This makes it safe for use in humid environments. Technical specifications: Attribute Parameter MatGuard Range 440-F series Protected area 1500 x 1000mm Length 1.5m Width 1m Thickness 16mm Mat material Plastisol vinyl IP rating IP67 Year: 2023

Condition: new, Year of construction: 2025, functionality: fully functional, Material feed unit for four-sided planer IF-100 Maximum and minimum length of workpiece: 1050 – 6100 mm Maximum and minimum width of workpiece: 50 – 247 mm Maximum and minimum thickness of workpiece: 12 – 100 mm Feed speed controlled by frequency inverter: 20–100 m/min Main motor power: 5 kW Accelerating upper feed rollers: 2 pcs Accelerating lower feed rollers: 2 pcs Podoxz Ax Nopfx Amxjgt Driven feed rollers: 3 pcs Feed roller dimensions: 180 × 100 mm Feed motor power with flat chain: 0.37 kW Number of flat feed chains: 5 pcs

Condition: new, functionality: fully functional, Year of construction: 2026, The wobbler feeder is a feeding system that delivers superior performance, especially when handling large, sticky, and moist materials. Its structure, consisting of rotating elliptical rods, creates a vibrating motion during material flow. This motion separates fine materials from larger particles and provides consistent feeding to crushers and screens. As a result, clogging is prevented and the overall efficiency of the plant is increased. Widely used in the mining, aggregate, and recycling industries, wobbler feeders are typically placed in front of primary crushers. This ensures that the material undergoes pre-screening in the initial stage. Its ability to operate without clogging, even with sticky and clayey materials, makes it an ideal solution for demanding conditions. Its mechanically simple design, ease of maintenance, and long-lasting performance keep operating costs to a minimum. With these features, wobbler feeders are a reliable choice for all plants requiring a continuous and balanced material flow. Wobbler Feeder Technical Specifications Body Liners: HARDOX 450 – 10 mm Feeding Capacity: 150 - 200 t/h Weight: 18.5 tons Dimensions: 4,000 x 1,000 mm Wobbler Motor: 14 x 3 kW, 1500 rpm, GAMAK brand Gearbox: Heavy-duty type Walking Platforms: Available Pgjdjxpvh Tjpfx Amxet Steel Feet: Available Why Choose CONSTMACH Wobbler Feeders? CONSTMACH wobbler feeders stand out with their high-quality, durable materials, heavy-duty gearboxes, and ease of maintenance. Each one is designed to offer long-lasting, low-cost operation. HARDOX body liners provide maximum resistance to wear, while the adjustable design easily adapts to different material types. CONSTMACH is a trusted name in the industry for its production quality, engineering support, and after-sales service. Invest in a wobbler feeder with the CONSTMACH guarantee for the continuity and performance of your facility. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products designed to meet the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), Catalog number 6765 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 160mm number of spindles 4: 1) horizontal lower 230mm, 5.5kW 2) vertical right 160mm, 5.5kW 3) vertical left 160mm – electrically adjustable right/left from the control panel, 5.5kW 4) horizontal upper 230mm – electrically adjustable up/down from the control panel, 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm from above: - infeed rollers, toothed, pulling, 6 pcs, including 2 double rollers - outfeed rollers, pulling, rubber, 2 pcs from below: - infeed roller, toothed, pulling, metal, twisted in the lower table + - outfeed roller, pulling, metal, smooth - rollers adjustable pneumatically - length of infeed table (with pneumatic feeder) 3390mm - possibility of operation without activating the pneumatic feeder, - table adjustable up/down Pjdsztzmcspfx Amxjgt - central lubrication - electric adjustment of planing thickness - stepless adjustment of feed rate - feed on Cardan shafts - feed motor 4kW - enclosed in a cabinet - diameters of dust extraction nozzles 4x120mm - dimensions (L/W/H) 7000x1950x1700mm, - weight approximately 3000kg – for wet and dry wood – pneumatic feeder on the infeed table, – used planer, very good condition Net price: 65900 PLN Net price: 15326 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages. Pjdjtz Dkaepfx Amxsgt

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Podpfx Ameb Umtkjxegt

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Psdpfxjcr Ru Ds Amxogt Cost of delivery Client cover startup type negotiated Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads Pgjdol Dw Nxspfx Amxjt long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: used, machine/vehicle number: SN: R050A-24E0011, I-PULSE F2 Feeder F2-44mm___1 piece F2-32mm___2 pieces F2-24mm___4 pieces F2-16mm___5 pieces F2-12mm___6 pieces F2-84mm___39 pieces F2-82M_mm___6 pieces Pgjdpsww Etwjfx Amxjt Feeder Stick____1 piece

Condition: excellent (used), Year of construction: 2003, Feeder Caps 8006 automatic disc feeder, sorting machine Fully automated, variable dosing speed, manual height adjustment. Stainless. Year of production: 2003 Power: 0.55kW max. dosing capacity: approx. 1000 pcs / min Diameter: 1400mm Pgsdpfx Asg Rkwmsmxst Siemens control. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, Year of construction: 2018, operating hours: 6,000 h, functionality: fully functional, We are offering this used FOR REC Rotary Shear FX5000 4x90 KW, manufactured in 2018. Make: FOR REC Model: Rotary Shear FX5000 4x90 KW Year of manufacture: 2018 Condition: used Operating hours: 6000 The supply includes: - FOR REC FX5000 rotary shear complete with hopper and discharge chute. - Remote control - Electrical control panel with HMI touchscreen and existing connection cables Podpozf Adgofx Amxegt - Hydraulic power unit 4x90 KW complete with oil cooling system and existing hydraulic hoses - Documentation (User Manual, Electrical and Hydraulic Diagrams) - 1 set of spare rotors with new blades installed - Other spare wear and replacement parts If you have any questions or require further information, please do not hesitate to send us a message or give us a call.