Used Arnold Laser Welding System for sale (49,710)

Year of construction: 2002, condition: good (used), Machine type: Laser welding system Pjdpfx Aiekv Upie Togu Manufacturer: Arnold Factory number: 20435 DCS Year of manufacture: 2002 Available from January 2027 Available at the current location for self-dismantling. Optionally, we can offer dismantling and loading services.

Condition: used, Eos EOSINT plastic laser sintering system P380, fully operational with extensive accessories. Pedpfx Ajyghhuei Tegu

Condition: used, Bielomatik Type: K3633/023 Bielomatik Laser Welding System Machine Description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. In the middle part of the machine frame is the working area with the welding station, the tool (on the rotary table), and the clamping system for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area by a laser-proof enclosure. The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser Type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic Data Machine Equipment: 1 complete machine frame with enclosure, substructure, and safety devices, painted. Adjustable machine feet, designed for transport with a forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is firmly mounted on the back of the machine. Laser system from IPG. 1 fiber laser 300W cw, at the fiber optic end, 1070nm - completely air-cooled. 1 power supply for laser unit, pilot beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour 1 Scanner - 20 aperture Optics, F-Theta lens, focal length determines the processing field and processing distance 2x base tool, tool coding with transponder Clamping system for holding a mask with absolute encoder with pneumatic clamping system for controlled pressing of each welding part Pneumatic air shower for protection of the lens housing Microbox PC427B incl. RTX (Siemens) Pre-installed software - Siemens S7 PLC Profibus, Profinet, Ethernet, RS232 interface Touch panel 15” for operation and data/parameter input, machine lighting Connection flange for on-site extraction Machine Data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly screwed onto the machine frame. Area requirement: 5400 x 5400mm Podpfxszgaazs Ai Tsgu Technical Data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse: 16A Exhaust: Nominal diameter ∅160 Air volume 500-1000 m³/h Weight approx. 2000 kg Condition: used (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Tekol / Trumpf Laser welding system Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 extraction system Description: For sale is a professional Tekol LAP S4 laser welding system with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction system. The system is a closed, precision laser welding station for fine, pinpoint and low-distortion welding operations on metal parts. The pulsed laser enables very controlled heat input, clean weld spots and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototype construction and small series production. Closed protective cabin with safety system, control unit, rotary table and extraction/filter system. Technical data – system Tekol LAP S4 Operating voltage: 400 V ~ N / PE Current type: 3~ 400 V, 50 Hz Rated current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel ranges X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary table: 2-stage Technical data – laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical data – extraction system TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Air volume flow, free-blowing: approx. 390 m³/h Effective volume flow: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound pressure level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: Pre-filter Particle filter Activated carbon filter Weight approx. 900 kg Condition: used Podpfxezizpco Ai Tegu Scope of delivery: (See picture) Laser welding system Tekol LAP S4 TRUMPF TruPulse 44 laser unit Extraction system TBH GL 230 Documentation / folders / data storage media Keys and accessories as shown in the photos (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Föhrenbach Laser Welding System Furthermore, I would like to inform you that the laser has been stored for shipping in 2 wooden crates. Data sheets are available as PDF files. Complete data package (4 folders). Pgjdexuri Dspfx Ai Teu As previously mentioned, since this is a "custom machine," there are no off-the-shelf solutions here.

Condition: good (used), Year of construction: 2013, 1 laser system with 1 loading station, 2 nests each - Up to 4 welding fixtures - Laser power: 3.3 kW - Beam source: Trumpf Trudisk 3302 disk laser - System manufacturer: Sitec - Operating hours: approx. 70,000 h - Max. workpiece dimensions: approx. 300 x 100 x 100 mm - Larger workpieces possible - Beam guidance via laser light cable (LLK) - Laser welding with Trumpf BEO D 70 welding optics on one axis system. - Inline laser monitoring system for weld seam monitoring - Welding speeds: up to 5600 mm/min - Welding penetration depth: 1.5 mm - Welding with shielding gas possible! For aluminum or stainless steel - Fixtures can be water-cooled! - 2 rotary axes per table side, individually programmable PROGRAMMING: 4 cylinder clamping circuits per tool 10 inputs via slip ring rotary distributor 8 additional inputs per tool via radio system Inputs freely configurable via user interface (end position / part control / setup control) Clamping and release programs and part queries fully programmable via NC program No PLC programming required System fully programmable via Siemens control (G-code) Pgsdpfx Aowm I H Soi Tju Laser programmed via Trumpf TruControl and called via Siemens control (G-code). Output Guidelines T 1: 2 weld seams (each 100 mm in diameter, weld penetration depth = 1.5 mm) 2 components per side of the table approx. 250 parts per hour T 2: 17 weld seams (each 10 mm in diameter, weld penetration depth = 1.2 mm) 2 components per side of the table approx. 190 parts per hour The system can be viewed live!

Condition: used, Scanlab PowerScanII 50i Aperture 50 mm Angle encoder, galvanometer scanner, analog position detector Optics, wavelength ranges (standard): 9400 nm, 10600 nm Max. laser power: 2500 W @ 9400 nm, 10600 nm Typical deflection angle: ±0.35 rad (optical) Dynamics, number of installed tunings: 1 Typical tuning: Fast-Vector-Tuning Settling time: < 0.45 ms Positioning speed (f = 160 mm): 20 rad/s Step response (100% full scale) 1% full scale: 1.0 ms 10% full scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position resolution (max.)*: 18 bits for XY, 16 bits for Z * Non-linearity: < 2.1 mrad / 44° 8-hour drift (after 30 min) Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner Digital controller card Control interface (alternatives): digital SL2-100 Pjdpfx Aiezikcfo Togu Extended diagnostics: yes (iDRIVE) Supply voltage (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan axes: 3-axis system with integrated varioSCAN Housing versions: scan head Connector positions: relative to beam exit Weight without lens (standard housing): 35 kg Size (L x W x H) (standard housing) (433 x 268 x 266) mm³ (with varioSCAN) Beam offset: 72.72 mm Other features Water cooling: yes Air cooling: yes Other specifications Operating temperature: 25 °C ± 10 °C Deviation of deflection angle: < 5 mrad Deviation from zero position: < 5 mrad Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Shipping & Collection: Secure shipping on a pallet (by arrangement) or collection on site is possible. We will be happy to answer any further questions you may have by telephone.

Year of construction: 2021, condition: ready for operation (used), A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment. Psdpfxsyugl Ue Ai Togu

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) Pgjdpfxeh Ad E Hj Ai Tsu 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Year of construction: 2007, condition: ready for operation (used), Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible. Pgjdpsy U Nrfefx Ai Teu

Condition: new, Year of construction: 2026, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Pgedpjn Sl D Refx Ai Tju

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: P2060, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: RAYCUS, laser source model: fiberlaser, laser power: 3,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, workpiece weight (max.): 27 kg, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, type of cooling: water, overall weight: 12,000 kg, total length: 12,000 mm, total width: 5,000 mm, total height: 5,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Fiber laser tube cutting machine Golden Laser P2060A-3D 3000 W for sale. The machine is in daily production use, fully functional, and can be inspected while powered on. Main configuration: Laser source: Raycus 3,000 W fiber laser Cutting head: 3D 5-axis bevel cutting head with auto focus CNC control and software: PA (Germany) Nesting software: Lantek (Spain) Servo motors: Yaskawa (Japan) Reducers: APEX (Taiwan); gears and rack: alpha (Germany) Linear guides: HIWIN (Taiwan) Pedpj Afwzwsfx Ai Togu Proportional valve: SMC (Japan) Main electrical parts: Schneider (France) Chiller: Tongfei Automatic bundle loader (load size 800 x 800 x 6,000 mm) Automatic unloading / collecting device (max. collecting length 3,000 mm) Pneumatic double chucks with auto-centering Floating support system and floating rear material support Weld seam recognition camera (round and rectangular tubes) Automatic lubrication Dust extraction unit / air dust dryer 5.5 kW Technical data: Tube diameter range: 20–200 mm Max. tube length: 6,000 mm Tube types: round, square, rectangular, oval, obround, H, angle, I and irregular profiles Max. tube weight: 37 kg/m Remnant length: 50–80 mm (Ø < 100 mm), 180–200 mm (Ø ≥ 100 mm) X/Y positioning speed: 95 m/min X/Y acceleration: 1.5 G Chuck rotation speed: 160 rpm Positioning accuracy: ±0.03 mm Axis travel: X 7,180 mm / Y 250 mm / Z 125 mm Axis motor power: X 3 kW, Y 2 kW, Z 2 kW Machine power: 30 kW, 380 V AC, 50/60 Hz Machine weight: approx. 12 t Footprint: approx. 12 x 5.5 m Year of manufacture: 2022 Location: Slovenia Inspection and test cutting possible by appointment.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-1500-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1500 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Pgsdpsthigrsfx Ai Tou Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. Pgsdpfjthit Eox Ai Teu The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Manual laser welder 3000 W There are two features that characterize Otinus laser welders - perfectly repeatable welds and ease of use. The kit includes: laser welder with a built-in cooling system welding gun features with a focal length adjustment and a set of accessories MAX Photonics fiber laser source automatic wire feeder lead and hose kit nozzle and lens starter kit Specifications laser power output 1500 W laser wavelength 1064 nm welding speed: up to 120 mm/s feed voltage 230 V 50 Hz Pjdpferumymjx Ai Tegu dimensions (including the laser head rack) 630x1300x1500 mm Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Fiber optics connecting the welding gun with the laser source allows the operator to work freely at multiple workstations. Small heat affected zone prevents from severe distortions. The weld is applied in a short time achieving proper and strong joint between materials. Intended use The laser welder is designed for professional use in workshops and plants where high welding quality and aesthetics are required. Laser source output power: 1000 W Carbon steel: up to 3 mm Stainless steel: up to 3 mm Aluminum: 2 mm Brass: 0,8 – 1 mm Laser source output power: 1500 W Carbon steel: up to 4 mm Stainless steel: up to 4 mm Aluminum: 3 mm Brass: 1 mm Laser source output power: 2000 W Carbon steel: up to 5 mm Stainless steel: up to 5 mm Aluminum: 4 mm Brass: 2 mm Laser source output power: 3000 W Carbon steel: up to 8 mm Stainless steel: up to 8 mm Aluminum: 7 mm Principle of operation The laser welder melts down the welding wire together with material edges by means of a laser beam. After switching on and setting up the unit, the welding gun is positioned at the beginning of the future weld line. Then, by pressing the trigger of the welding gun, the beam is generated at the fiber laser source located inside the housing. The beam propagates along the optical fiber to the laser head. The beam is focused and emitted toward the welding wire, which is fed by a wire feeder and toward a location where the gun has been placed. After the trigger is pulled, the head should be pulled along the weld line according to the wire feed rate. The cooling system maintains a constant temperature for the gun and the laser source by means of a water recirculation system. Radiation level and cooling are managed using a controller that adjusts the parameter values according to the user’s parameter settings.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0720, Year of construction: 2015, overall weight: 370 kg, laser power: 200 W, travel distance Z-axis: 570 mm, laser source model: LS-PEC 200, A comprehensive service costing €5,000 was recently performed on the system by the manufacturer. Pjdpfx Ajzlqt Noi Tjgu The lamp, mirror, and cooling circuit pump were replaced. The system was initially used as an exhibit from 2015 to 2018. From 2020, the system was used at approximately 50% capacity, and from 2023, only one day per week! Ideal for toolmaking, repair, or die-casting part refurbishment! TECHNICAL DETAILS Laser type: Nd:YAG Laser source: LS-PEC 200 Average power max.: 200 W Pulse peak power: 9 kW Pulse energy: max. 100 J Pulse duration: 0.4–20 ms Pulse frequency: 1–20 Hz (100 Hz) Focus diameter: 0.2–2.0 mm Positioning speed: 0.5–15 mm/s X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 570 mm MACHINE DETAILS Electrical connection data Mains voltage: 400 V Phases: 3 Mains frequency: 50 Hz Dimensions & weight Dimensions (L x W x H): 950 x 1,550 x 1,250 mm Weight: 370 kg Total pulses: 56,527,413 EQUIPMENT Joystick control LED lighting Swivel device for the resonator to weld large molds Protective gas supply directly controlled via a solenoid valve Heavy-duty castors Laser resonator including resonator mechanics Laser rod Resonator cavity Resonator mirror Safety shutter Power supply including mains fuse Mains switch Emergency stop switch Motor protection switch Interface with hardware monitoring function Lamp switch Industrial controller Capacitor bank

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 2 x Videojet Laser Marking Systems for date/batch coding and marking with 1 x AD Oracle laser fume extraction system. Date of manufacture - 2019. Pjdpfx Aiezyu Igj Tegu The marking of the product surface is performed by the effect of intense laser radiation on the product material. The laser beam is focussed onto the product surface and heats up the topmost layer of the material, which causes a color change or a vaporization of the topmost dye layer. Laser Marking System model – 3340 IP54 LASER MARKING SYSTEM. Laser Marking System serial numbers - V1098/498 and V1908/499. Laser Marking System electrical requirements - 100-240 V / 50-60 hz / 1 phase. Fume extraction system model - AD Oracle. Fume extraction system serial number - 50067797003. Fume extraction system electrical requirements - 115-230 V / 50-60 hz - 1 phase.

Condition: good (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 790 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 2,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 2kW – Top Technology for Efficient Sheet Metal Welding Demonstration Unit – Excellent Condition Pgsdpfx Asn Sl Dbei Teu Discover the smart and high-performance solution for precise laser welding: the Airtech handheld laser welding system with 2,000 watts of power! Perfectly suited for demanding sheet metal fabrication – efficient, safe, and highly versatile. Highlights and Features: - Power output: 2,000 watts for superior weld quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – ideally designed for ergonomic operation - Robust housing and intelligent internal structure for maximum durability - Touchscreen display for intuitive operation - Optional automatic multifunctional wire feeder - Safety features: three-color alarm, safety interlocks, and protection against operating errors - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Benefits - Work safely thanks to comprehensive protection mechanisms and alarm systems - Flexible applications, including automatic wire feed and robot integration - Low operating costs and easy maintenance due to well-designed engineering and long-life components For more information or consultation, the Airtech team will be happy to assist you!

Condition: new, Scanlab Podpfx Aezikb Usi Tjgu PowerScanII 50i Aperture 50 mm Angle encoder, galvanometer scanner, analog position detector Optics, wavelength ranges (standard): 9400 nm, 10600 nm Max. laser power: 2500 W @ 9400 nm, 10600 nm Typical deflection angle: ±0.35 rad (optical) Dynamics, number of installed tunings: 1 Typical tuning: Fast-Vector Tuning Settling time: < 0.45 ms Positioning speed (f = 160 mm): 20 rad/s Step response (100% full deflection) 1% full deflection: 1.0 ms 10% full deflection: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position resolution (max.)*: 18 bits for XY, 16 bits for Z * Non-linearity: < 2.1 mrad / 44° 8-hour drift (after 30 min.) Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner Digital controller card Control interface (alternatives): Digital SL2-100 Extended diagnostic options: Yes (iDRIVE) Supply voltage: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan axes: 3-axis system with integrated varioSCAN Housing options: Scan head Connector positions relative to beam exit Weight without lens (standard housing): 35 kg Size (L x W x H) (standard housing): (433 x 268 x 266) mm³ (with varioSCAN) Beam offset: 72.72 mm Other equipment Water cooling: Yes Air cooling: Yes Other specifications Operating temperature: 25 °C ± 10 °C Deviation of the deflection angle: < 5 mrad Deviation from the zero position: < 5 mrad Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Shipping & Pickup: Secure shipping on a pallet (upon arrangement) or local pickup possible. We will gladly answer any further questions you may have over the phone.

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Pgjdpfx Aijziww Ae Teu Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Condition: ready for operation (used), Year of construction: 2021, operating hours: 300 h, functionality: fully functional, total height: 1,000 mm, total width: 550 mm, total length: 1,200 mm, laser power: 1,500 W, laser wavelength: 1,075 nm, ambient temperature (max.): 45 °C, The machine is in very good condition with less than 300 operating hours! Pedpfxozb Nl Rj Ai Tsgu TECHNICAL DETAILS Laser power at the workpiece: 1,500 W Wavelength: 1,075 ± 5 nm Type of laser beam delivery cable: LLK-A / BF 10 Laser safety Laser protection class: 4 Performance Level Emergency Stop button (PLE) TSS – Triple Security System Installation conditions and options Ambient temperature: 5–45 °C Integrated cooling Operating concept Machine control: Touch panel Programmable channels: 9 WLAN MACHINE DETAILS Dimensions (W x H x D): 550 × 1,000 × 1,200 mm EQUIPMENT Integrated pilot laser BLT laser welding device PenWelder Laser beam delivery cable Connection cable Contact tips and guide rail Configurable access control OPC-UA interface Remote service

Condition: good (used), Year of construction: 2015, • ASYS INSIGNUM 2000 CO₂ laser with integrated rotating station • Year of manufacture: 2015 • Max. marking area: 350 x 350 mm (without axis movement) • Printed circuit board formats: Min. 70 x 50 mm to Max. 460 x 460 mm • Board thickness: 0.8 mm to 3.0 mm (Permissible weight up to 2/3 kg) • Camera system: Integrated camera • Connection power: 230 V / 50 Hz / approx. 0.7 kW • Compressed air supply: 6 bar • Dimensions (approx.): 701 mm x 1,548 mm x 1,522 mm (LxWxH) Pgjdo Agfwqspfx Ai Tou • Incl. extraction system

Condition: like new (used), Year of construction: 2018, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20RD.(Payload: 20kg, H-Reach: 2017mm, Robot Mass: 293kg, 2010.04) Podpjh Ad E Uefx Ai Tegu 1 x YASKAWA DX100 controller.(2010.05). 1 x IPG YLS-4000.(2017). 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD(S.N.:BIMO2W17013). Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, continuous power: 3,000 kW (4,078.86 HP), Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine SURE3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: The SURE handheld laser welding system with 3,000 watts of power! Perfectly suited for demanding sheet metal processing – efficient, safe, and flexible to use. Pedjy R I Tgopfx Ai Tsgu Highlights and Features: Power: 3,000 watts for the highest welding quality and speed Laser wavelength: 1080 nm, continuous operation with a modulation frequency of up to 20 kHz Handheld laser welding head – optimally positioned for comfortable operation Robust housing, intelligent internal structure for maximum service life Touchscreen display for easy operation Automatic multi-function wire feed possible Safety features: Three-color alarm, safety interlocks, protection mechanism against incorrect operation Cooling via a separate water circuit with a 13-liter tank volume CE-certified components according to European standards. Your Advantages Work safely thanks to extensive protection mechanisms and alarm systems Flexible application possibilities, including automatic wire feed and robot integration Low operating costs and easy maintenance thanks to well-designed technology and durable components.

Condition: used, Eos Type: EOS M270 Metal Laser Sintering System Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (including build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-Theta lens, high-speed scanner The system has been upgraded with a Scanlab hurrySCAN 30 for a more accurate print result. Focus diameter: 100 μm Dimensions (W x D x H) system: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please contact the manufacturer. Scope of delivery: Eos M270, cooler, and software Pgsdozh Dn Eopfx Ai Tju Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.