Used Artech Grinding Line for sale (13,230)

Condition: good (used), Year of construction: 2004, machine/vehicle number: 300 584, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 400 V, input current: 85 A, type of input current: three-phase, overall weight: 8,000 kg, year of last overhaul: 2016, We are selling a complete shredding line including: - Artech RS75 shredder - Pusher / compactor - Electrical control cabinet Hnjdsxrtwwopfx Agysk - Overband magnet - Sampler The loading conveyor and the discharge conveyor after shredding are not included in the sale.

Condition: ready for operation (used), approx. 120 pieces = 480 running meters of safety conductor rails Number of conductors / number of poles: 5 in standard lengths of: 4 m Busbar cross section: 10 mm² for mains voltage up to: 500 V Load capacity at 100% ED: 60 A Weight per meter: 2.1 kg Hjdped Hurbefx Agysnk

Condition: good (used), Grinding and separating line Seydelmann MG 160 B / SEPAmatic 1200 Seydelmann mixer-grinder with lifter for 200 liter meat bins, type: MG160B, plate diameter: 160 mm, dimensions: 2000 mm x 1700 mm x 2200 mm. Switch cabinet, dimensions: 1230 mm x 1000 mm x 600 mm. Mobile elevating belt, s/s frame, plastic belt, belt width: 370 mm, elevating height: 1950 mm, total dimensions: 2950 mm x 850 mm x 2080 mm. Hnodpfx Agevnbtijyjk Sepamatic separator, type: SEPA 1200, 400 V, 50 Hz, 12 A, 6 kW, plastic belt, belt width: 180 mm, perforations: 3 mm, total dimensions: 1500 mm x 1400 mm x 1750 mm. S/s trolley with extra drum, perforations: 5 mm, total dimensions: 850 mm x 700 mm x 1100 mm.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4410x3050x2727 mm Weight 13070 kg Hnsdpov A Hf Tsfx Agysk Total power requirement 172 kw Wide Belt Sanding machine Linie SANDOMAT WT-RRC1300+SUR-RP1300 Wide Belt Sanding machine WT RRC1300 (Roller+Roller+combination)- Max. Working width 1300mm- Min. Working Length 490mm- Working Thickness 3-150mm- First unit: Contact roller Ø240- Second unit: Contact roller Ø240- Third unit: Ø240 pad- Total: Motor 77kw- First Unit: Motor 30kw- Second Unit: Motor 22kw- Third Unit:Motor 18.5kw- Conveyor belt: Motor 4kw- Lifting Motor 0.55kw- Brush roller: Motor 1.5kw- First unit: Contact roller shore Steel- Second unit: Contact roller shore 80sh- Third unit: Contact roller shore 55sh- Conveyor belt: Speed 5-30m/min- Abrasive Belt Size 1350*2620mm- Air Pressure 0.6Mpa- Overall Dimensions 2235×3050×2600mm- Net Weight 5700 kgs- Working Table Fixed- Working table height from the ground 900mm- Voltage 400v/50hz/3phases- Air jet for each belt Optional- Automatic centering of conveyor belt YES- Press roller (rubber) YESWide Belt Sanding machine SUR-R-P1300 (Roller+Roller+Pad)- Max. Working width 1300mm- Min. Working Length 350mm- Working Thickness 10-100mm- First unit: Contact roller Ø255- Second unit: Contact roller Ø255- Third unit: pad- Total: Motor 95kw- First Unit: Motor 37kw- Second Unit: Motor 30kw- Third Unit:Motor 18.5kw- Conveyor belt: Motor 4kw- Lifting Motor 0.55kw- Brush roller: Motor 0.55kw- First unit: Contact roller shore 80sh- Second unit: Contact roller shore 70sh- Third unit: Contact roller PAD- Conveyor belt: Speed 5-30m/min- Abrasive Belt Size 1320*2000mm- Air Pressure 0.6Mpa- Overall Dimensions 2175×2976×2727mm- Net Weight 7370 kgs- Working Table Fixed- Working table height from the ground 1038mm- Voltage 400v/50hz/3phases- Air jet for each belt YES- Automatic centering of conveyor belt YES- Press shoes(steel) YES

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4630x3005x2334 mm Weight 12160 kg Total power requirement 135,6 kw Hnodpov A Hftefx Agyjk

Condition: excellent (used), Year of construction: 2019, Wanrooe Grinding Line Year 2019 Consisting of a single shaft crusher, a conveyor elevator of approximately 4 meters with suction installation Hodpfjwqtuiex Agysnk

Year of construction: 1973, condition: used, grinding length 1600 mm Hnodjpid Ivepfx Agysk centre height 185 mm diamter spiral cutter 55mm mm indexing 4-32 Modul length 5900 mm width 2300 mm height 2000 mm weight 7 t

Year of construction: 1979, condition: ready for operation (used), Max. grinding diameter: 300mm, Max. grinding length: 1950mm, Max. workpiece length: 2000mm Max Feed rate 1 – 30 m/min. Coolant supply 100 l/min Inf. variable speed range 2.000 – 6.000 RPM. Spindle 88 mm Centers height 150 mm Grinding wheels 100 – 250 mm Spindle power 3,5 kW Hnsdpfxehq Uigj Agyek Grinder Power 15 kW – 380 V – 50 Hz

Year of construction: 1973, condition: good (used), 1 used spline shaft grinding machine make Fritz Werner type FKR 16 year 73 No. 5275/8012 Hodpfx Ajn Atchegysnk technical data center height 185 mm max.grinding length1600 mm passage diameter 55 mm pitches 4-32 L 5900 x W 2300 x H 2000 mm weight 7 to

Condition: ready for operation (used), Year of construction: 1980, machine/vehicle number: 134B, functionality: fully functional, operating hours: 15 h, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding height: 270 mm, height adjustment type: mechanical, total height: 1,900 mm, total length: 3,450 mm, total width: 1,513 mm, overall weight: 4,900 kg, travel distance X-axis: 1,120 mm, travel distance Z-axis: 190 mm, grinding length: 850 mm, workpiece weight (max.): 80 kg, disc diameter: 125 mm, distance stand to spindle center: 362 mm, distance table to spindle center: 180 mm, feed length X-axis: 1,120 mm, feed length Z-axis: 190 mm, feed rate X-axis: 15 m/min, grinding spindle speed: 7,400 rpm, grinding wheel diameter: 125 mm, grinding wheel width: 16 mm, grinding width: 320 mm, pivoting range: 369 °, rotational speed (max.): 7,400 rpm, rotational speed (min.): 2,880 rpm, spindle speed (max.): 7,400 rpm, spindle speed (min.): 2,880 rpm, table length: 1,000 mm, table width: 250 mm, tank capacity: 127 l, working range: 850 mm, Spline Grinding Machine MSZ 3451Б (Profile grinding machine for splined shafts) The MSZ 3451Б is a specialized spline grinding machine designed for precision grinding of external splines and profiled shafts. Manufactured by МСЗ (Moscow Machine Tool Plant), this machine is intended for industrial applications requiring accurate profile grinding and reliable repeatability. The machine is suitable for workpieces with a maximum length of 1000 mm, while the maximum grinding length is 850 mm. It supports workpieces with a maximum diameter of 320 mm and a maximum weight of 80 kg, making it ideal for medium-sized splined shafts. The machine allows grinding of parts with 3 to 48 splines, covering a wide range of spline configurations. The grinding spindle is designed for grinding wheels with diameters from 25 to 125 mm and a maximum wheel width of 16 mm. The spindle operates at stepped speeds of 2880 / 4550 / 6300 / 7400 rpm, driven by a total installed power of 4 kW. The permissible grinding wheel speed corresponds to the selected spindle speed and wheel diameter, ensuring safe operation. The machine features a rigid worktable with a length of 1000 mm and a width of 250 mm, with a travel distance along the X-axis from 200 to 1120 mm and a Z-axis travel of 190 mm. Height adjustment is performed via a mechanical system, providing precise and stable positioning during grinding operations. With overall dimensions of approximately 1513 × 3450 × 1900 mm and a machine weight of about 4900 kg, the MSZ 3451Б offers excellent stability and vibration damping. The machine operates on three-phase power (3 × 400 V, 50 Hz) and is supplied with factory documentation, facilitating operation, setup, and maintenance. Key Features: *Specialized spline grinding machine *Maximum workpiece length: 1000 mm *Grinding length up to 850 mm *Maximum workpiece diameter: 320 mm *Workpiece weight up to 80 kg *Number of splines: 3–48 *Grinding wheel diameter: 25–125 mm *Grinding wheel width: max. 16 mm *Spindle speeds: 2880 / 4550 / 6300 / 7400 rpm *Total installed power: 4 kW *Mechanical height adjustment *Rigid industrial construction (~4900 kg) Hnjdpfsx S Hc Nox Agysk Typical Applications: *Grinding of external splines *Profile grinding of splined shafts *Precision machining in machine-building industries *Repair and refurbishment of transmission components *Small- and medium-series production of splined parts

Condition: ready for operation (used), Year of construction: 1978, Spline shaft grinding machine Fritz Werner type SKR 30 Y.o.m.: 1978 center height: 200 mm max. grinding diameter: 150 mm min. grinding diameter: 10 mm max. length between centers: 3000 mm max. grinding length: 2950 mm min./max. diameter of the grinding wheel: 40 / 250 mm Hnsdev Sm Nqepfx Agysk main drive power: 8.5 kW With accessories. Movie with machine underpower available

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM Hnjdothg Diopfx Agysk

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Hsdpfstiy Ntox Agyjnk Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: ready for operation (used), Dry sorting line (17 pockets) Manufacturer - SATEKO (Valmet) modified - 1996 (7pcs) & 2023 (3pcs) Total number of pockets - 17 pcs Separate rake conveyor on top. Drop from above Latest update 3 pockets in 2023 (Biocone) Main layout attached Hnedpfx Aexmr Rrsgysk

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Hnsdstqmwgjpfx Agysk Lubeca LW792 can filler Lubeca LW303 can seamer

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator, drive power: 250 kW, control cabinet with star-delta starter. Rotor length: 1200 mm, rotor diameter: 800 mm, number of knives/rotor: 36 pcs, number of knives/stator: 4 x 6 pcs. 2 hydraulically swiveling stators with 2 rows of counter-knives each. Hydraulic pusher, bearing temperature monitoring, central lubrication for rotor bearings. Net weight: 29,800 kg. Year of manufacture: 2005, overhauled in 2025, all wear parts have been replaced. Hodpjxiw Hwofx Agyjnk

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets CNC control: FANUC 15M Hsdpfxjyzxyxe Agyonk Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871

Condition: used, functionality: fully functional, Price with dismantling. Hnedpfxoyzhvvs Agyok Drysorter with control system Mitsubishi A2. Drysorter capacity 80 pc/min after rebuild 2021 new control system Siemens S7 1500, ABB580 frequency converters and Finscan 2019 automatic sorter. Drysorter equipped with Dynagrade 2015 (updated 2020).

Condition: used, functionality: fully functional, Wet board sorting line 27 bins. Price with dismantling. Control system Siemens S7 400 and Rema 9050 Hnodpfxeyzhnxs Agysk Stick handling/robot (ALMAB) with control system Mitsubishi A2n.

Condition: excellent (used), Year of construction: 2018, Stork / Marel AMF Filleting Line AMF-i Professional Chicken Breast Filleting Line – High Efficiency and Precision We offer a complete Marel / Stork AMF-i filleting line designed for advanced poultry processing plants. This system provides automated, precision filleting of chicken breasts, guaranteeing maximum efficiency and top product quality. Key Benefits Intelligent Filleting (Adaptive Filleting) The system automatically adapts its settings to the size of the raw product, ensuring optimal quality and yield, regardless of piece dimensions. High Production Throughput Handles up to approximately 60 fillets per minute – ideal for high-volume processors. Consistent Quality and Maximum Yield Minimized waste and effective recovery of valuable by-products such as tendons, skin, and trimmings. Modular Design The line is configurable and expandable, allowing easy adaptation to specific production requirements. Process Automation Reduced labor input and improved process consistency. The offered set includes: - Loader module - Filleting line with integrated measurement (encoder) system - Skinning module - Splitting module with automatic adjustment - Separation module - Tendon collection system - Original control cabinet Technical Specifications Model: AMF-i Manufacturer: Stork / Marel Year of Manufacture: 2018 Capacity: up to 60 fillets per minute Condition: Very good / Ready for immediate operation Type: Chicken breast filleting line Hedpfxox Hymds Agyenk STORK / MAREL / AMF / FILLETING LINE / CHICKEN BREAST

Condition: ready for operation (used), Year of construction: 2003, Complete Tetra Pak line TBA 21-1000 Slim, includes: 1. TBA/21 1000 Slim filler, V050, YOM 2003, 52.000 running hours Hnsdpfx Ajycwvasgysk 2. CAP30 cap applicator for Helicap23 Pro26 3. Easy Ride Terplus cartons accumulator 4. TCBP70 wrap around packer 5. Conveyor system 6. Conveyors system The line is in very good condition, still in production till April. Can be sold without CAP30 applicator.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, working width: 1,600 mm, total length: 75,000 mm, total width: 17,000 mm, Technical Details: Cefla painting/finishing line with roller coating machines for panel finishing *Maximum working width: 1650 mm *Automatic loading system with integrated robot *Line dimensions: 75 x 17 m *Line configuration: *3 x Cefla Smartclean 32-B brush cleaning machines *3 x Cefla Smartcoater MF Evo roller coating/painting machines *1 x Cefla Smartcoater SP1 Evo finishing machine *2 x Cefla UV-R M1 1600 UV curing tunnels (1 UV lamp each) *1 x Cefla UV-R M3 1600 UV curing tunnel (3 UV lamps) *1 x Cefla UV-R M2 1600 UV curing tunnel (2 UV lamps) *Cefla TR500 motorized conveyor line *Cefla automatic panel turner *Costa top sanding machine with 1 roller and 1 finishing pad Hodeyv Hzgopfx Agysnk *Automatic loading system with 2 x ABB robots

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Hnedpfx Agoyq Tb Ieysk Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: ready for operation (used), Complete Frying line Batter Mixer Koppens 400 mm Curtain Enrober Stein 16 inch (400 mm)Pre Duster Stein 16 inch (400 mm) Tempura Enrober Stein 16 inch (400 mm) Breader for Japanese Crumb Hsdpfx Aoyucv Aogyjnk Stein Fryer - 360 mm belt - 1.5 mm fry length electric heating

Year of construction: 2008, condition: used, Complete Omag production line with Masa circulation. Double concrete mixing plant Hnsdsyx D Hlspfx Agyek 5000 production boards Assyx 1400/1000 10 moulds