Used Ati Porta Sens 11 for sale (16,046)

Condition: used, This listing is for the ATI Porta Sens 11 Gas leak detector The unit is in full working condition and is ready for immediate use Key Specifications (PortaSens II) Sensor Compatibility: Accepts H10 “Smart Sensor” modules for detecting over 30 different gases, including toxic, flammable gases, and oxygen. Range & Accuracy: Accuracy typically within ±5% of the measured value (dependent on sensor). Lasdexv Dh Ispfx Am Nsa Display: Backlit graphics LCD for clear visibility in varying lighting. Alarms: Three levels of gas concentration alarms, low flow alarm, and low battery alarm. Sampling Modes: Supports both instantaneous and timed sampling. Data Logging: Stores up to 12,000 data points with customizable intervals (1–60 minutes). Power Supply: D-cell alkaline battery (75 hours) and NiCad rechargeable backup (6 hours). Pump: Internal rotary vane pump (~400 cc/min flow rate). Operating Range: -25°C to 55°C; 0–95% RH (non-condensing) Size & Weight: 3.5″ W x 9″ H x 5.5″ D; ~7 lbs

Condition: used, This listing is for the ATi Portsens111 Gas Leak Detector The unit is in full working condition and is ready for immediate use The ATI PortaSens III is a portable, handheld gas leak detector designed for locating and measuring gas leaks across a wide range of environments—from chemical plants to pharmaceutical labs, food processing facilities, and confined spaces Key Features & Capabilities Interchangeable Smart Sensors Attaches a variety of pre‑calibrated smart sensor modules, each combining sensor, amplifier, and memory into one. These allow detection of 30 to over 60 different gases, depending on configuration Swapping sensors takes under a minute and requires no user calibration Built-in Sampling Pump & Flexible Wand Enables pinpoint detection of leak sources via one‑hand operation Color Touch-Screen Display Features a backlit, graphic or touch-enabled LCD for easy reading in all lighting conditions Data Logging & Connectivity Includes a 4 GB internal data-logger, capturing millions of data points. Log intervals are programmable from 1 to 60 minutes, with USB connectivity for data transfer Lodpfxsxhfqbs Am Njaa Power Options Runs on either rechargeable NiMH “D” cell battery or traditional alkaline D-cell batteries Alarms & Alerts Offers both visual and audible alarms—including low flow and low battery warnings—plus multiple gas concentration thresholds Supported Gases The D16 PortaSens III can detect a broad spectrum of gases, including but not limited to: Toxic gases: Hydrogen sulfide (H₂S), hydrogen peroxide (H₂O₂), formaldehyde, chlorine, sulfur dioxide, ammonia, and others Common industrial gases: Oxygen (O₂), ozone (O₃), carbon monoxide, carbon dioxide Specialty/exotic gases: Arsine (AsH₃), diborane, ethylene oxide, phosphine, silane, bromine, iodine, and more

Condition: repair required (used), Year of construction: 2005, functionality: limited functionality, machine/vehicle number: 101121, travel distance X-axis: 230 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 3, number of slots in tool magazine: 72, tool length: 220 mm, input voltage: 380 V, type of input current: three-phase, PORTACENTER is a 3-spindle CNC machining center designed for high-precision operations such as milling and drilling steel, brass, cast iron, aluminum, and more. The machine we are offering is no longer capable of producing reliably. Our Italian subcontractor offers a complete retrofit of this machine for €300,000. Today, a new equivalent machine costs around €800,000. Lodoxg Rxnepfx Am Njaa

Condition: new, Year of construction: 2026, color: grey, maximum load weight: 12,000 kg, empty load weight: 1,700 kg, loading space volume: 11 m³, loading space width: 2,330 mm, loading space length: 6,000 mm, loading space height: 800 mm, machine/vehicle number: 83357, Roll-off container made in Germany – currently in stock Manufacturer: BITA Model: GRB S SLC 60, heavy-duty design Dimensions: 6000x2330x800 mm Colour: pebble grey RAL 7032 Payload: 12,000 kg Hook in accordance with DIN 30.722, hook dimension DIN 3640 mm Laedpfx Amoyiud Uo Noa Straight front wall Double-leaf rear door with central locking as per UVV Continuous tarpaulin hooks with rope guide Initial UVV inspection: February 2026

Condition: good (used), Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Siemens, Simatic S 5 fan assembly from Demag D 100-275 NC injection molding machine -Type: 6ES5 981-0 HA 11 -Voltage: 230/115V Ledpfsn Hbb Ajx Am Nsaa -Dimensions: 490/175/H265 mm -Weight: 2.9 kg

Condition: ready for operation (used), Heidenhain Id. 324 952-11 interface board SN:8985870A, the item has been fully refurbished and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as per photos. Lasdpfxox Erygj Am Noa

Condition: ready for operation (used), Heidenhain Id. 324 952-11 interface board SN:8592093A, the item has been fully refurbished and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as shown in the photos. Lajdpfxjx Erx No Am Nea

Condition: ready for operation (used), Heidenhain 324 955-14 interface board SN: 11 390 618, the item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% fully functional, scope of delivery as shown in the photos Lodpjx Erudjfx Am Nsaa

Condition: ready for operation (used), Heidenhain Id. 324 952-11 interface board SN:8656681A, the item has been fully refurbished and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as per photos. Laodpjx Eryajfx Am Nja

Condition: ready for operation (used), Heidenhain Id. 324 952-11 interface board SN:8533139A, the item has been completely overhauled and comes with a 3-month warranty, used, normal signs of use, 100% functional, scope of delivery as shown in the photos. Lodpfx Asx Dwrpem Noaa

Condition: ready for operation (used), Bürkert SC00015-6U F03F05-N-DS-11 AU Pneumatic rotary actuator 214529, coil voltage 24 VDC, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Ljdpfoi D Ul Djx Am Njaa

Condition: used, machine/vehicle number: 1916, mileage: 394,891 km, power: 162 kW (220.26 HP), first registration: 12/2012, fuel type: gasoline, empty load weight: 7,700 kg, maximum load weight: 2,300 kg, overall weight: 10,000 kg, color: white, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 5,150 mm, loading space width: 2,450 mm, loading space height: 2,600 mm, Equipment: ABS, air conditioning, cooling unit, onboard computer, tail-lift, Special features - MAN BrakeMatic engine brake - Air conditioning - Electric mirrors, heated - Electric exterior mirrors with wide-angle, heated - Electric windows - Driver's seat air-suspended with armrest - Central locking - Radio - On-board computer - Rear axle air suspension - Sunroof Body Box from AUBINEAU - Length 5.15 m Width 2.45 m Height 2.6 m (internal dimensions) - Interior lighting Carrior Supra 450 unit Dhollandia DHLM.30 tail lift - 1500 kg Lsdsi Aq Uvepfx Am Nsaa - Remote control MAN TGL is a vehicle suitable for the transport of delicate goods, in which the interior temperature can be set as desired from +25℃ to -25℃. With a 6-seater cabin, 2.7 m tail lift and air suspension, the vehicle is ideal for moving and transporting works of art, flowers and frozen food, medicines and more. Immediately available - Location Langenfeld NEW! - We offer a G U A R A N T E E from MultiPart New TÜV ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. The presentation is carried out exclusively with original photos, which were taken directly at our premises – thus we guarantee full transparency concerning the actual condition of the vehicle. Our vehicles undergo a comprehensive reconditioning in our own specialist workshop before sale – including mechanics, bodywork, and painting. They are thus optimally prepared for the next technical inspection. In addition, we guarantee the authenticity of the stated mileage. Trust is good – control is better: On request, the vehicle can gladly be inspected by independent inspection organizations such as TÜV, DEKRA, or KÜS – also as part of a remote inspection. Our service offer for you: Delivery of your vehicle to your desired location Complete handling of export formalities, including export plates Individual financing and leasing offers Trade-in of your current vehicle Installation of special equipment as desired Are you looking for something specific? If you currently do not find a suitable vehicle for your company in our stock, please contact us – we are happy to help. For technical details, further photos or a personal consultation, we are at your disposal at any time. All stated prices are net prices. The contents of our website have been created with the greatest care and are regularly updated. Nevertheless, they are solely for general information and do not replace individual advice. Only the details stated in the sales contract are binding. Subject to change, errors, typing errors and prior sale.

Condition: used, functionality: fully functional, sheet thickness steel (max.): 21 mm, Sacma Hydromatic Shear 1250 X 21 C 11-12 Manufacturer: Sacma Model: Hydromatic C 11-12 Cutting Capacity: 21 Mm. Cutting Length: 1,250 Mm. Passage Between Shoulders:1,410 Mm. Recess: 250 Mm. Main Motor Power: 30 Hp. No. of Strokes Per Minute: 25 Total Weight: 15.5 Tons. Motorized Register Stroke 1,000 Mm. Lajdpowq Sv Sefx Am Noa Internal Code: Svr 325

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 1,700 mm, type of input current: AC, total width: 750 mm, total length: 900 mm, overall weight: 300 kg, input voltage: 230 V, table load: 15 kg, year of last overhaul: 2025, ambient temperature (max.): 30 °C, ambient temperature (min.): 12 °C, maximum load weight: 20 kg, Equipment: documentation/manual, lighting, type plate available, Fully factory-refurbished and modernized multisensor coordinate measuring machine Mahr MS222 with a modern 64-bit CNC controller and Windows 11, including 12 months warranty and full support from the specialized service company. The measuring device has been completely factory overhauled and reconditioned, equipped with a modern new controller and the latest version of our measurement software. Laedpswcxb Sefx Am Nsa The measuring system will be delivered and set up at the customer’s site for the above-mentioned price. Additional optional services: On-site commissioning / calibration Training Custom measurement programming for immediate start of part inspections Complete package includes: Measuring machine 64-bit CNC controller Industrial PC with Windows 11 Perpetual software license OptiCheck3D 2025 (full license of the measurement software with no subscription or maintenance contract) Multisensor head with high-resolution industrial camera Renishaw TP20 touch probe system (alternatively TP200 system available) including one standard force module Calibration artifact Acceptance certificate / calibration certificate (pre-shipment condition) Free delivery within Germany (EU and international shipping available on request) Specifications: Measuring range: 200 x 200 x 200 mm Load capacity: 10 kg on glass plate Scale resolution: 0.1 µm Max. travel speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Accuracy according to VDI/VDE 2617 Sheet 6, ISO 10360-2: U1 = 1.9 + L/200, U2 = 2.2 + L/150, U3 = 2.9 + L/100

Condition: excellent (used), Year of construction: 2012, Technical Data Product Number SK 11-320 Year of Manufacture 2012 Blade Length 517mm Height 900 mm Width 750 mm Length 980 mm Power 1 kW Power Supply Electric: 400V 50Hz 3N The Townsend SK 11-320 membrane skinning machine is a compact, high-quality device for removing membranes from all types of meat. It is intended for butcher shops and production facilities. The machine features a built-in knife with a length of 517 mm. The device is easy to clean and operate. No tools required for disassembly and cleaning Lajdpfoycvyqjx Am Nea Additional information and videos for interested parties can be sent via email The machine is in perfect condition without any defects after a complete overhaul Drum is very sharp New bearings and seals Meets all European Union standards and safety requirements – CE certificate.

Condition: ready for operation (used), Year of construction: 2006, Technical Data Product Number SK 11-320 Year of Manufacture 2006 Blade Length 517 mm Height 900 mm Width 750 mm Length 980 mm Power 1 kW Electric Power: 400V 50Hz 3N The Townsend SK 11-320 meat remover is a compact, high-quality device for removing all types of meat. It is designed for butcher shops and production plants. The meat remover has a built-in 517 mm knife. The device is easy to clean and operate. No tools required for disassembly and cleaning Laedpfxoxdvq Rj Am Nja I can send more information and videos to interested parties at my email address The device is in perfect condition without any defects after a major service Very sharp shaft New bearings and oil seals

Condition: excellent (used), Year of construction: 2006, Technical Data Product Number SK 11-350 Machine dimensions: 700 x 700 x 1,100 mm (W x D x H) Ledpfx Amsxxm Uco Nsaa Blade width: 520 mm Weight: approx. 240 kg Protection class: IP 69 Capacity: 16 tons/8h Very sharp roller Machine after complete overhaul, ready for operation The machine is equipped with two tables, enabling skinning of round and flat components The machine is ergonomically designed to maximize operator efficiency and productivity. Downtime for cleaning is significantly reduced.

Condition: excellent (used), Brand: Rational Model: VCC 211 Length: 1140 mm Width: 920 mm Height: 1110 mm Connection voltage (V): 400 Power (W): 22000 Ljdpeyvtp Rjfx Am Nsaa

Condition: excellent (used), Year of construction: 1998, Ferromatik Milacron K110D-S/2F / 2K injection molding machine Year of construction: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Injection pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 470x470 mm Size of the clamping platens: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Ferromatik Milacron Additional equipment: 2-component injection molding machine Euromap 67 Robot interface Hydraulic core pull x 4 Control system with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in the vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine has been regularly serviced The service center recently replaced the machine's cylinder with screw and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/width/height: 5.00x1.60x3.60 m All offered machines are started by our service technicians before sale. Lajdpfey Dqcwsx Am Noa It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2011, operating hours: 40,885 h, overall weight: 6,500 kg, displacement volume: 49 cm³, clamping force: 110 kN, injection pressure: 2,236 bar, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) Ljdpfx Amsw N Egao Nsaa delivery time: on request terms of payment: 100% prior to delivery

Condition: used, GS international Capacity 12 tons Year of construction 2010 Immediately available Lajdpfx Amjyxv E Hj Nea Loading bridge needed on site? We can transport the loading bridge for you

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm Laedpfx Asvuuknem Nsa column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Fröling Turbomatic TMC – automatic wood chip boilers (35–110 kW) Several Fröling Turbomatic TMC units in stock – ready for immediate delivery. Output (kW) – Price (net) 35 kW – 5,000 EUR 55 kW – 6,000 EUR 70 kW – 7,000 EUR 85 kW – 8,000 EUR 110 kW – 10,000 EUR The Fröling Turbomatic is a fully automatic biomass boiler, suitable for wood chips, shavings and pellets. ✔ Fully automatic operation ✔ Heavy-duty industrial design ✔ High operational reliability The price already includes the feeding screw (dosing auger), which automatically transports the fuel directly into the combustion chamber. The complete extraction system (raumaustragung) is usually not included (available separately). 👉 For the 110 kW model, the complete extraction system is already included. ⸻ Key technical features: • Lambda-controlled combustion for optimal efficiency and low emissions  • Automatic grate with vibration and tipping function for self-cleaning operation  • Multi-pass heat exchanger with automatic cleaning (WOS system)  • Automatic ash removal system (combustion chamber + heat exchanger)  • Induced draught fan ensures safe operation even with poor chimney conditions  • Large refractory-lined combustion chamber for stable high-temperature combustion  Lodpfxjwakkto Am Neaa ⸻ Additional benefits: • Modular system – easy installation • Individual drives → high system stability • Automatic adaptation to fuel quality and moisture ⸻ 📍 Location: Mosonmagyaróvár, Hungary 📦 Immediate availability

Condition: like new (used), functionality: fully functional, Year of construction: 2023, The RM Super Rain 890 GX 110/550 is a hose reel irrigator (reel system) from the Super Rain / GX series by the Italian manufacturer RM Irrigation. The designation 110/550 refers to a hose with a diameter of 110 mm and a length of 550 m. It is designed for irrigating large agricultural areas. Lasdpfx Amsxgha Ns Noa

Year of construction: 1975, condition: used, machine/vehicle number: 27749, height of centers: Schleif-Ø 250 mm distance between centers: Schleiflaenge 575 mm grinding wheel measures: 500 x 60 x 127 mm electrical connection: 380 V, ca. 9 kVA kW Ledpjz Hc Iefx Am Nsaa space needed: 2650 x 2600 x 2240 mm weight: 3400 kg