Used Auger Drill for sale (5,180)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Virtually as-new machine Traded in for CNC after only a few months of operational use. - R0.22.16 CE version Codpfxjx Rcuxs Adrorh - 58.01.03 Automatic horizontal/vertical movement of the drill head - 59.03.93 Servo-controlled adjustment of the descent speed of the drilling group - 58.01.00 Tool holders diameter 10 mm - 58.01.18 Pneumatic hold-downs

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Crodpfertrx Rjx Adroh Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Crjdpowuz Dgofx Adrsh

Condition: used, overall weight: 45,000 kg, Maus MTV4LSL500 Turning Machine/Drill. Credpjz Hc Npsfx Adrjh Weight 45,000 kg. Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured.

Condition: used, Year of construction: 2008, machine/vehicle number: LV082, overall weight: 44,000 kg, Pittler PV1250 Vertical Turning Machine/Drill. Weight 44,000 kg. Condition Machine needs work. Delayed removal unit will be ready for removal by the end of September. Csdpfoz Hb U Rjx Adrerh Buyer responsible for removal, contractor must be licensed and insured.

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Solid construction – weight 76 kg. 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Codpfszt H Nvjx Adrorh Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: excellent (used), Year of construction: 2008, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 30762, spindle speed (max.): 3,000 rpm, type of input current: three-phase, total length: 10,000 mm, total height: 2,000 mm, total width: 5,000 mm, table length: 3,100 mm, drilling capacity: 40 mm, drilling depth: 130 mm, workpiece weight (max.): 7,500 kg, Manufacturer: Ficep Year of manufacture: 2008 Serial number: 30762 Technical specifications: Maximum workpiece width: 3,100 mm Minimum workpiece width: 400 mm Minimum workpiece length: 1,900 mm Maximum workpiece length: 6.4 m Maximum material thickness: 130 mm Maximum drilling diameter: Ø40 mm Maximum workpiece weight: 7,500 kg Plasma source: Hypertherm HPR260 Spindle speed: 180–3,000 RPM Minimum workpiece size: 200 × 150 mm Equipment: Complete line with motorized roller conveyors for feeding and removing material Approximate feeding conveyor length: 8 m Approximate removal conveyor length: 5 m Codpfx Adoz Inhgerorh Includes a wide conveyor for removing metal scrap.

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Credpfxowuz Ekj Adroh Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, WE OFFER AN NICE CONDITION DEEP HOLE DRILLING IXION WITH BRAND NEW CONTROLS Crodpfxoyk Ixbe Adroh

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, feed length W-axis: 1,600 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information Codsz Iy Ncspfx Adrorh incl. 15 plates

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Direction of rotation: Right to left Condition: As is (Very good condition) Credez A D H Uepfx Adrsh Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm - Spindle cooling Water-cooled - Control & Software Schraml software with Siemens electrical components - Included accessories Automatic sharpening device for tools - Separate vacuum pump for glass fixing - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Dismantling, loading and installation can be carried out on request by our service team.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Drilling capacity in steel (diameter): 2-20 mm Overhang: 210 mm Drilling stroke: 100 mm Distance spindle/table max.: 450 mm Speed range: 355 – 710 – 1400 - 2800 rpm Spindle taper: MK2 Cjdpfx Adoz H T Dkjrerh Table clamping surface: 340x280 mm Total power requirement: 1.1 kW Machine weight approx.: 165 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Facom foratrice Through-hole drill f-v3r-2l-3f+2tagr1 used 2015 Brand: Facom foratrice Model: Through-hole drill f-v3r-2l-3f+2tagr1 Description: Through-feed drill F-V3R-2L-3F+2TAGR1 All heads and saws are screw-adjustable with mechanical indicators. Drilling depth is controlled electronically. Minimum workpiece length: 300-350 mm Maximum: 2000 mm Automatic feeder Cedpfxox Rd Ele Adrjrh Bsbtt Sov U Uw Ujx Nteda Double-sided cutting with angle adjustment Double-sided drilling with angle setting 3 drill heads top + 2 wheels + 2 rear All heads have angle adjustment Electronic position markers I can send a video via WhatsApp The machine is operational and connected; you can test it 2015 Year: 2015

Condition: new, Year of construction: 1983, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm Csdpfx Aez Iy Nvodrjrh - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: used, Workbench Drilling Machine GUILLARDON GT 16 Cone: CM2 Spindle exit: 150 mm Rotation: from 150 to 3000 RPM Table size: 400 x 400 mm Rotation right / left Throat depth: 280 mm Spindle diameter: Ø 60 mm Column diameter: Ø 105 mm 2 speeds motor Speed variation by belt drive Non-functional electronic drive Manual Descent Crjdpfx Ajz I Diaedrsh Maxi height mandrel/table: 450 mm Mini height mandrel/table: 150 mm Sold with the table Voltage: 380 V Width: 500 mm Depth: 900 mm Total height on the table in high position: 2100 mm Total height on the table in a low position: 1700 mm Weight: approx 350 kg

Condition: used, Year of construction: 2011, working width: 1,300 mm, workpiece height (max.): 50 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum workpiece thickness: 50 mm Number of working areas: 2 Number of controlled axes: 3 Drilling units Number of drilling units: 4 Crjdpfx Asz Ekggodrjh Drilling unit 1: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 2: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 3: Bottom Horizontal drilling spindles in Y-direction: 42 Drilling unit 4: Bottom Horizontal drilling spindles in Y-direction: 42 Milling units Number of milling units: 2 Milling unit 1: Top Controlled axes: 3 Motor power: 6.6 kW Milling unit 2: Top Controlled axes: 3 Motor power: 6.6 kW Sawing units Number of sawing units: 2 Sawing unit 1: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm Sawing unit 2: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm EQUIPMENT Albatros machine programming software Collets for workpiece clamping The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5446

Year of construction: 2023, operating hours: 139,959 h, condition: used, Serial number: 750 Complete installation: - BySmart 3015 Fiber 10.000 - ByTrans Modular - BySort 3015 - Tower-Linie 3015 1T Working Area & Cutting Range: Nominal sheet dimensions (X × Y): 3000 × 1500 mm. Max. cutting range (X × Y × Z): 3048 × 1524 × 100 mm. Max. weight on shuttle table: 1,100 kg (fully loaded shuttle table). Table changeover time: Approximately 27 seconds. Dynamics & Speed Drive: High-rigidity gantry system. Max. axis speed (parallel X, Y): 100 m/min. Max. simultaneous positioning speed: 140 m/min. Maximum axis acceleration: Up to 12 m/s², ensuring fast corner and hole processing. Accuracy (according to ISO 230-2) Positioning accuracy (Pa): ± 0.1 mm. Repeatability (Ps): ± 0.05 mm. Edge detection accuracy: ± 0.5 mm using the automatic optical measurement sensors on the cutting head Laser Cutting Head & Technology (2023 Standard) Cutting Head: Original Bystronic Engineered fiber cutting head with automatic focal point adjustment (Autofocus). Nozzle Handling: Automatic nozzle centering and automatic nozzle changer (depending on the selected factory options). Credpfx Adjzyq H Seroh BeamShaper (Optional): Adjusts the laser beam profiles for better cutting quality and higher speeds in thick carbon steel Laser Power: 10 kW Carbon Steel (Mild Steel): Up to 25 mm (30 mm with BeamShaper). Stainless Steel: Up to 30 mm. Aluminum: Up to 30 mm. Brass / Copper: Up to 15 mm / 12 mm. Control & SoftwareCNC control: ByVision Cutting with a 21.5-inch HD touchscreen mounted directly on the machine. Software Integration: Fully compatible with BySoft CAM (automatic nesting, cutting path optimization, and integration with the Bytrans extended automation systems). Cutting hours: 1399,59 Operating hours: 19720,58 Pneumatic pre-pressure: nominal 6 bar Pneumatic pressure cut-off point: 5 bar Power: 400 V/50 Hz Maximum positioning speed: X/Y axes parallel: 100 m/min Maximum positioning speed: X/Y axes simultaneous: 140 m/min Maximum axis acceleration: 8 m/s² Maximum laser power: 10 kW Power range: 1,000 to 10,00 Online auction of modern and very well maintained metalworking machines (e.g. 2023 BYSTRONIC BYSMART FIBER 3015 10kW laser incl. tower- and sheet storage modules complete, 2x 2023 BYSTRONIC XPERT PRO press brakes, 3x 2023 VALK WELDING incl. PANASONIC welding robots, Q-FIN deburring and finishing, KASTO automatic saws, SIEGMUND welding clamping tables, HAAS machine tools etc.), previously in use at Lemken, the well-known manufacturer of agricultural equipment - including plows and seeders - in Dinteloord, The Netherlands, due to the relocation of the manufacturing. The online auction opens Thursday 3 September and closes Thursday 8 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 6 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with...

Condition: ready for operation (used), functionality: fully functional, Pillar drill / ALZMETALL AB 3 ES from a vocational school - Well-maintained, original condition - Drilling capacity / steel max. 35mm - Arm reach 280mm - Table size 600x470mm - Drilling stroke 180mm Crodez Iht Nspfx Adroh - Morse taper MK 3 - Stepless speed control - Drilling depth stop - Speed indicator - Drill chuck - Documentation Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight 500 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2006, Mt5 x 1,600mm, 25-2,000Rpm Cedpfx Aez Il R Eedrsrh

Condition: ready for operation (used), functionality: fully functional, ARBOGA UM 3008 / Drilling and Milling Machine -Spindle speeds / 8 stages / 105 - 3020 rpm -Gear / Gear head / Swiveling and tilting -Tool holder MK 3 -Drilling capacity / Steel max. 30mm Codpfez Hy Hrsx Adrerh -Drilling depth / Quill stroke approx. 130mm -Max. distance - Spindle / Table approx. 600mm -Cross table 585x245mm, adjustable via crank Dimensions: L x W x H 0.9 x 0.8 x 1.9 meters / Weight approx. 600 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Horizontal drilling machine gomad unit one piece horizontal drilling .Net price fv.Year of production 2004 very good condition machine operational and complete Cedpfx Astxabwjdrorh

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 114/2021, functionality: fully functional, operating hours: 120 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 40 mm, total width: 1,700 mm, total length: 20,000 mm, total height: 4,000 mm, pressure: 8 bar, HIGH-SPEED DRILLING AND MILLING MACHINE: a compact, high-performance vertical machine suitable for drilling and milling rectangular glass sheets. Ideal for series production and can be integrated with grinding lines or used as a stand-alone unit. The machine can process glass with the following properties: Technical specifications of the drilling and milling machine: Technical specifications of the vertical washing machine Glass type: Clear/extra clear, coated, colored in the mass Glass shape: Rectangular Minimum dimensions of glass processed by the drilling machine: 500x300; minimum dimensions of glass for the washing machine: 150x400 Maximum dimensions: 2400x4000 Csdpfx Adjz Ihfxersrh Thickness: 3-12 mm Hole diameter: 6-40 Working height: 600 ±50 mm Power: 22 kW

Condition: ready for operation (used), Gillardon GB 40 VE 40-1100 Drilling Machine, Bench Drill Drilling capacity (steel): approx. 40 mm Drilling capacity (cast iron): approx. 50 mm Threading capacity: M27-M33 Tool holder: MK4 Codpfx Aez H U Hmsdrsrh Speed range: 60-1600 rpm (stepless) Feed rate range: approx. 0.1; 0.16; 0.25 mm/rev Albrecht drill chuck: 3-16 mm Spindle stroke: 200 mm Overhang: 350 mm Space requirement: 1200 mm x 800 mm x 2100 mm (L x W x H) You are welcome to visit us for an inspection. We would be happy to arrange an affordable shipping service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.

Year of construction: 2002, condition: used, functionality: fully functional, Machine for straight cutting of aluminium and copper tubes. Csdpoyt Spcefx Adrorh

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale the CNC the drilling and milling machine ZAFFERANI GLASS S.r.l Type: AZV MILL 550 Crjdpfx Asz H A Iredrsh Year: 2015 in PERFECT working condition Max. glass size: 3400 x 3210 mm Min Glass Size 500 x 300 mm Glass Thickness 4 - 25 mm Installed Power KW 8