Used Automatic Spindle Moulder for sale (32,045)

Condition: used, Year of construction: 2005, functionality: fully functional, SECOND-HAND AUTOMATIC SPINDLE MOULDER CASADEI MATRIX 5 (4+UNIVERSAL) - CE rules - Year 2005 - Composition: Iijdpfsx Rp Ixjx Abmef Horizontal bottom Vertical right Vertical left Horizontal top Universal - Total installed power Kw 31,9

Condition: ready for operation (used), Year of construction: 2017, operating hours: 7,315 h, functionality: fully functional, machine/vehicle number: 4445, travel distance X-axis: 2,320 mm, travel distance Y-axis: 1,980 mm, travel distance Z-axis: 860 mm, controller model: Siemens Sinumerik 840D sl, spindle speed (max.): 40,000 rpm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €425,000 plus VAT! Note: This sale concerns the sister machine of the identical Hamuel Reichenbacher machine that was recently auctioned. TECHNICAL DETAILS Travel distance X1/X2 axis: 2,320 mm Travel distance X3/X4 axis: 2,320 mm Travel distance Y1/Y2 axis: 1,980 mm Travel distance Z1/Z2 axis: 860 mm Rotational range B1 axis: ±181° Rotational range B2 axis: ±181° Rotational range C1 axis: ±361° Rotational range C2 axis: ±361° Spindle speed: 40,000 rpm Tool holder: HSK-E40 Spindle power: 7 kW Number of spindles: 2 Travel speed in X direction: 90 m/min Travel speed in Y direction: 45 m/min Travel speed in Z direction: 90 m/min Number of tools: max. 6 Tool diameter with 4 tools: max. 40 mm Tool diameter with 2 tools: max. 240 mm Tool length from reference plane: max. 270 mm Tool weight: max. 2 kg Total weight of all tools: max. 24 kg MACHINE DETAILS Control system: Siemens Sinumerik 840D sl Compressed air supply Compressed air quality: according to DIN ISO 8573-1 Pressure: min. 7 bar Air volume flow: approx. 1,000 Nm³/min Voltage: 400 V (±5 %) Frequency: 50 Hz Mains connection: 3 phases, neutral conductor and protective conductor Short-circuit strength Ic: 17 kA Dimensions & Weight Dimensions (X x Y x Z): approx. 5,800 x 3,600 x 3,000 mm Machine weight: approx. 15.0 t Operating Hours Spindle hours, spindle 1: 7,872 h Spindle hours, spindle 2: 7,315 h Iodpjztxczofx Abmjif EQUIPMENT Chip conveyor Hexagon 3D measuring probe Note: Further technical details can be found in the attached offer. Clamping devices and tools are not included in the offer.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 917, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle type: Z80-K530.04 Drive type: SIE / HD MACHINE DETAILS Power: 24.5 kW Voltage: 230 / 400 V Frequency: 50 Hz Motor type: SERVO EQUIPMENT CE marking Measuring probe Iiodpfeztxgmex Abmjf Tool holders (as shown in the picture)

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Iedpfx Aszmukuebmjif

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 8.25 kW (11.22 HP), spindle diameter: 30 mm, total length: 2,400 mm, total width: 950 mm, overall weight: 1,200 kg, Equipment: documentation/manual, Table milling machine PANHANS with pivoting spindle, D=30mm and D=40mm; pivoting and height adjustment are electric. Table extension to the left and right, extendable table support. Iisdszrnlcjpfx Abmjf

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, actuation type: electric, table length: 205 mm, Equipment: CE marking, rotational speed infinitely variable, We are selling a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise panel saw K 700 (year of manufacture 2010) and the matching mobile dust extraction unit AF 14. Both machines are in a well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers who are looking for a complete solution. 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Voltage / Frequency: 400 V / 50 Hz (three-phase) Features: Smooth-running aluminum sliding table, large extension table with retractable guide rail and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece clamping device (eccentric clamp). 2. Felder AF 14 mobile dust extraction unit (included): Model: Felder AF 14 (movable on rollers) Isdpfxezrl A Es Abmoif Power: Powerful motor with robust steel fan wheel Airflow: Max. 2,350 m³/h for excellent chip extraction Convenience: Practical quick-change system for chip bags Accessories: Includes flexible extraction hose (as shown) for direct connection to the panel saw. The system is completely coordinated – connect it and start working dust-free immediately! The machines can be viewed on-site and tested while powered up after prior arrangement.

Year of construction: 2002, condition: excellent (used), The Sedgwick spindle moulder is designed with a backward tilting spindle - 45 degrees with a forward tilting of 5 degrees. Isdpfx Abozumtqsmsif Motor Power 4kw 1.1/4" Spindle diameter Spindle length 140mm Ex College Machine - Like New Year 2002

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0803024, functionality: fully functional, 4-SIDED PLANKER-MOULDER 5 REINFORCED MOTOR TOOL HOLDERS & 3.00 M CHROME TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken before servicing & cleaning) MAKING CAPACITIES: - 4-sided planer and moulder - Max. cross-section: 130 x 230 mm - Thicknesses: 10 to 130 mm - Widths: 15 to 230 mm - Minimum length for single workpiece: 600 mm > 760 mm with use of the universal spindle - Adjustable infeeds: max. 10 mm - Spindle speed: 6000 rpm PLANKER COMPOSITION: - Robust frame Welded machine shop - Secure, soundproof, and fully panoramic enclosure on gas struts with interior lighting - Digital counters (Siko type) for precise manual adjustments of each operation - Raised control panel and operator face - Cast steel infeed table (LxW): 2980 x 255 mm Table height from ground: 900 mm - Side infeed spring-loaded pusher - Digital pass-taking indicators 1) Planer spindle 7.5 kW Tool holders Ø125 x L.230 mm 2 & 3) Right & left vertical spindle 12 kW Tool holders Ø125 x L.130 mm 4) Upper horizontal spindle with independent adjustment 11 kW Tool holders Ø125 x L.230 mm - Adjustable pressure shoe at the output 5) 360° universal spindle 11 kW Spindle Ø 50 x L. 240 mm - Vertical idler wheel presser DRIVE: - Feed with variable speed drive: 6 to 24 m/min Drive motor: 3 kW - Helical steel infeed roller in the table Cardan shaft drive - 7 pneumatic pressure rollers 2 notched steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller in the table at the planer outlet OTHER FEATURES: - Main power supply: 400V. Three-phase + T 50 Hz - Installed power: 53 kW (72 hp) IN 95.6 A - Automatic star-delta starting - Motors with brakes - Toothed belt drive - Electrical thickness adjustment by raising and lowering the beam. 0.37 kW motor - Shaft diameter: Ø50 mm - Minimum working air pressure: 6 bar - Suction: 5 x Ø 120 mm Recommended flow rate: 6100 m3/h Speed: 20 to 28 m/sec depending on the humidity of the wood being machined Isdpfx Abev Tzw Eomsif - CE marking - Padlockable contactor, mushroom stops Dimensions in operating order (W x H): 3000 x 2250 mm Dimensions: 5100 x 2000 x H 1810 mm Weight: 4300 kg Machine supplied with mounted sharpening irons, manual, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or vacuum systems. Upon request, the machine will be serviced and brought into compliance, with inspection and dynamic functional testing. With a 3-month warranty and certificate of compliance. Ex-stock price excluding VAT. Delivery and additional services upon request.

Condition: excellent (used), Year of construction: 2023, Swivel spindle milling machine Manufacturer: Hofmann Type: TFS 107 Year of manufacture: 2023 Swivel range: -45.5° to +45.5° Table: 2,000 x 813 mm Table height: 890 mm Power: 7.5 kW Speed: 1,500 - 10,000 rpm, stepless speed adjustment Spindle diameter: 30 mm / 40 mm Vertical adjustment: 145 mm Tool holder: MK5 Feed: Yes Motor brake: Yes Dust extraction port diameter: 120 mm Iiedpfx Asztzntebmef Weight: approx. 820 kg Included: - Augner stop jaws - 40 mm spindle

Condition: excellent (used), Catalogue number 7340 TECHNICAL DATA - spindle diameter: 25mm Iiodpoztznaofx Abmof - spindle working height: 120mm - exchangeable spindle - spindle locking - height adjustable up/down - original cast iron fence with full adjustment - 4 spindle speeds + right/left rotation - table dimensions: 1030x900mm - motor: 3.8kW - overall dimensions (L/W/H): 1030x1000x1080mm - weight: 614kg ADVANTAGES – manufactured in Poland – very good condition – used milling machine Net price: 6,900 PLN Net price: 1,640 EUR depending on the exchange rate of 4.2 EUR (Prices may fluctuate due to exchange rate changes)

Condition: excellent (used), Catalog number: 8073 TECHNICAL DATA - Spindle diameter: 30mm - Spindle working height: 100mm - Adjustable up/down and angle - Original guide - Crosscut carriage - 4 types of rotational speeds: 3000, 6000, 8000, 10000 rpm - Table dimensions with carriage: 660x950mm - Cast iron table - With electric brake - Motor: 4kW - Dust extraction port diameter: 120mm - Dimensions (L/W/H): 980x810x1350mm - Weight: 230kg ADVANTAGES - Made in Germany - Crosscut carriage Iijdpfx Aozuk Daobmof - Tilting spindle - Brake - Unpainted - Used milling machine, very good condition Net price: 8900 PLN Net price: 2119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 1984, Design: swivelable Swivel angle forward: +45° Swivel angle backward: -5° Table length: 2200 mm Table width: 1100 mm Extendable frame support: Yes Selection of speeds: Belt change + pole change Taper of the milling spindle: MK 5 Diameter of the milling arbor: 30 Material of the stand: Steel Control panel position: below Height adjustment of the spindle: electric Swivel adjustment of the spindle: electric Spindle locking: manual Spindle brakes: electric Dust extraction diameter of the milling fence: 120 mm Spindle rotation direction: Left/right Iisdpfx Aezu Rkysbmsf Motor power: kW Electric axes: Swivel / Raise / Lower adjustment Closing of the table opening: Insert segment Design of the fence jaws: Aigner fence system Fence adjustment: manual Milling fence adjustment: Manual Feed device: yes, 4 rollers Weight approx.: 1200 kg Dimensions: 2200 x 1500 x 1600 mm Location: Nattheim

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. - Dovetail and slot table - Aigner integral fence Isdjztwr Iopfx Abmeif - Elu feed system - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation - Spindle: 30 mm #8503 Net price

Condition: repair required (used), Year of construction: 1991, Tilting spindle moulder Manufacturer: Panhans Model: 240 Year of manufacture: 1991 The electronic angle value detection (actual value) is not functional. Table: 135 x 80 cm Power: 11 kW Tilting range: -5° to +45° Iiedpfx Asx Tgtwjbmsf Angle adjustment: Electric Height adjustment: Electric Spindle speeds: 3/4.5/6/9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 780 kg Incl. power feed

Condition: good (used), Year of construction: 1979, Schütte SF51 6-spindle automatic bar lathe Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle automatic bar lathe with a 51 mm spindle bore, ideal for the efficient serial production of turned parts. These robust machines feature an electronic cam control system that offers high process stability and flexibility for turning, drilling, and threading operations. Iisdpfeyhpvpsx Abmef The machine is valued for its stability and flexibility in manufacturing demanding workpieces. Technical status: The machine has been regularly modernized and is up to current technical standards. Maintenance & Servicing: Professional maintenance performed strictly according to schedule by specialists. Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle automatic bar lathe Number of spindles: 6 main spindles Control system: Conventional Spindle bore: 51 mm Max. feed: 125 mm Max. turning length: 102 mm Max. drilling depth: 102 mm Threading unit Chip conveyor 6-position bar loader Voltage: 400 V The orange transport rack for long stock is included in the offer. The scissor lift table is not part of this auction but can be purchased from us separately. Gruse ELS 2-13-9 hydraulic scissor lift table "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 1989, condition: good (used), - tilting spindle under the account Iiodpfxjgxpile Abmsf - shaft diameter 50mm - up and down adjustment - pneumatic adjustment of the spindle position - 400V power supply - THE FEED IS NOT THE SUBJECT OF THE OFFER

Condition: good (used), Year of construction: 1993, functionality: limited functionality, power: 11 kW (14.96 HP), spindle diameter: 30 mm, total length: 2,600 mm, Planed cast iron table Table length 2600 mm Motorized height and swivel adjustment Iiedpfozp I Ekjx Abmsf Swivel range -5° to +45° Feed unit 4 speeds 3/4/6/9000 rpm Adjustment range of the milling cutter arbor 150 mm Aigner stop jaws The machine is in very good condition Motor brake defective Digital display defective

Condition: used, Year of construction: 1988, Spindle swivels: Yes, -5 to 45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Height indicator: scale Swivel angle indicator: scale Milling stop indicator: scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 8000, 10000 Motor power: 6 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1,200 mm Machine width: 1400 mm Weight: 1100 kg Iiedpfozq Dc Iex Abmef

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, the lower platen can be pulled out with the tool. Iodpfx Abetty Nksmoif -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: used, Year of construction: 1986, Table milling machine Manufacturer: Schneider Type: SK2/4 II Year of manufacture: 1986 Technical data - 3,000 - 10,000 rpm - Runs in both directions (left/right) - with Haffner feed unit - including accessories Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Ijdpfxjzuyxao Abmeif

Condition: excellent (used), Swivel spindle milling machine Manufacturer: SAC Type: TS 145 Electrically adjustable in height and swivel angle Spindle diameter: 30 mm Spindle height (stroke): approx. 150 mm Swivel range: -5° to +45° Spindle speeds: 3,000; 4,500; 6,000; 8,000; 10,000 rpm Isdpjzn H Hwsfx Abmeif Motor power: 7.5 kW Very good condition, little use.

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 Iijdpfx Abozt Ai Esmjf with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, power: 8 kW (10.88 HP), pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, tilting table milling machine MARTIN. Type T23, spindle diameter D=30mm, spindle swivel function, table extension to the left and right. Ijdpfx Abszakl Aomjif

Condition: used, Year of construction: 1992, Machine cleaned, function tested, partially overhauled. Spindle runout extremely precise, maximum 1/100 mm. Pneumatic hoses, filter pressure regulator, and mist lubricator replaced. Test run carried out. Used machine, excellent condition, premium features with plunge spindle. With this milling machine, both entry and exit milling operations can be performed. This means the milling spindle can be pneumatically controlled to plunge in and out via a table operated by adjustable limit switches. Manufacturer: Hofmann Model: TFS 1200 Year of manufacture: 1992 Machine no.: P127-92-222-723 Motor: 5.0 / 6.2 kW (reinforced) Swivelling range: -5° to +45° Motor brake Motor: 2 speeds, pole-changeable 6 speed levels: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Forward/reverse rotation Table size: 2,000 x 830 mm Milling arbor diameter: 30 mm Milling fence with fine adjustment Digital displays for milling fence, diameter, and cutting depth Electric height adjustment Electric swivel adjustment Iodjy Ay Dzepfx Abmeif Digital displays for swivel angle and spindle height Extraction connection: 2 x 120 mm diameter Required space: approx. 2,000 x 1,600 x 1,400 mm Weight: approx. 1,000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, function tested without overhaul, without warranty or guarantee

Condition: used, Year of construction: 1980, machine/vehicle number: 18.742, Table milling machine with rigid milling spindle Table size 1,920 x 900 mm, Motor 6/8 kW (8/11 HP), 4 speeds 3,000/6,000/4,500/9,000 rpm, Milling arbor D = 30 mm with Morse taper MK 5, weight approx. 700 kg, ex location Seevetal, Iedpfjul Sfmex Abmsif Sale in "as is" condition as inspected, without transportation, subject to prior sale