Used Autopack Vibratory Feeding Hopper for sale (13,085)

Year of construction: 2019, condition: excellent (used), Autopack Vibratory hopper 2019, Stainless, 150Kgs stainless hopper, 250mm discharge width, overall length 1500mm x overall width 1050mm, 1Ph Ljdpfx Ajzcg Ewsmmshh

Condition: used, Vibratory hopper, dosing hopper, storage bunker, linear vibratory feeder, sorting device Vibratory bowl feeder, spiral feeder / vibratory feeder Vibratory bowl, screw feeding with vibratory feeder for screwdriving technology Feeding system, feed device Lhedpfx Amsy E T Dtsmsh Manufacturer: MÜLLENDERS Type: MLF-G2 Year of manufacture: approx. 2000 Hopper capacity: approx. 4 liters Vibration frequency: 6000 Hz Control voltage: 24 volts DC (an external power supply is required) Mains connection: 230 volts, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24 VDC power unit). - REO control unit, type Reovib RS6 439-459, for adjustable vibration speed - Stainless steel hopper, hopper open to the rear - Base frame made from aluminum profile system Required space L x W x H: 380 x 210 x 700 mm Weight: 20.5 kg Good condition

Condition: used, Linear feeder / Vibratory feeder / Sorting device Vibratory linear feeder, vibratory hopper, dosing hopper, storage hopper Vibratory bowl feeder, bowl feeder Vibratory bowl, screw feeding system with vibratory feeder for screwdriving technology Ljdpsxf Urvjfx Ammohh Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Year of manufacture: approx. 2000 Useful load: approx. 1.5 kg Oscillation frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W = 170 x 60 x 12 mm - Mounted track length 340 mm - Overall height with base plate and oscillating plate approx. 115 mm Required space L x W x H: 400 x 280 x 400 mm Weight: 9 kg Good condition

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Lhsdpfx Amsy Urtfemsh Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, No. 10012 Feed hopper Rema Used Metal plate conveyor / steel plate belt Defective gearbox (Bonfiglioli) Drive power 15 kW Belt width 2000 mm Axis length 10000 mm The system has been out of operation since the end of January 2025 due to gearbox damage Without output conveyor Transport dimensions approx. 15000 x 3000 x 4000 / 5500 mm LWH Lhedpsv N E Iyofx Ammeh Sale on behalf of customer, ex location near 78628 Rottweil, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Feed technology / feed system / vibratory conveyor / sorting device / screw conveyor Vibrating bowl, sorting device / screw feeding with vibratory conveyor for screw feeding technology Feed system DEPRAG, Type: 0611-P/0.75-1S No.: 1183885, 2011 - 2012 The system was used to feed electrical plug contact pins. Product dimensions: Ø 4 mm, length 39 mm The pins are pre-sorted in the material hopper, and the feed belt conveys the pins on demand to the screw conveyor. From the screw conveyor, the product is fed to the product orienter via the linear conveyor. The product orienter aligns the product into the correct position and releases it for further processing. The unit comes from a prototype system; the external electrical control is not available and should be provided by a PLC. Without modification, it is suitable, for example, for the automatic and position-correct feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 belt hopper / feed conveyor belt DEPRAG Type: B 10 Mfg. No.: 1178201, Order No.: 415050A, Year of manufacture: 2011 Filling volume: 10 liters Belt speed: 100 mm/min Operating voltage: 24 volts (DC) - Belt surface with knurling - Folding stainless steel chute Weight 11 kg 1 screw conveyor vibrating bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Pot diameter at the top: 200 mm Pot diameter at the bottom: 100 mm Pot internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 volts, 50 Hz 1 DEPRAG vibrator controller for the screw conveyor Type: SZG Controller 6 Serial No.: 35 1 linear conveyor KENDRION Type: WS3B/36 Part No.: WSB003, 564025 Operating voltage: 230 volts, 50 Hz 1 DEPRAG vibrator controller for the linear conveyor Type: SZG Controller 6 Serial No.: 35 1 product orienter FESTO with 180° swivel range - 1 FESTO valve manifold CPV10-VI 18200 - Compressed air requirement approx. 6 bar Lhsdpfjkpwuuex Ammsh - 1 MURR base module, type MVP12 - Complete unit mounted on a steel plate with 4 feet Space requirement L x W x H: 1150 x 520 x 860 mm Weight: 100 kg very good condition

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Ljdpouzn Nnofx Ammjhh Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Year of construction: 2005, condition: excellent (used), For sale is a used dosing hopper with an internal dosing conveyor and an internal conveying rake: Dimensions: L: 3.90 m, W: 0.86 m, H: 1.50 m. Conveyor belt width: 0.75 m. Includes an associated conveyor belt: Length: 4.20 m, belt width: 0.50 m. In very good condition. Technical details: See photos. Lhodpfx Ajiuxucommjh

Condition: used, functionality: fully functional, gearing type: mechanical, fuel type: electric, Year of construction: 2019, Height: approx. 4,700 mm Bunker volume: approx. 60 m³ Plate conveyor width / length: approx. 1,150 x 4,800 mm Length: approx. 7,400 mm Width: approx. 5,200 mm Bonfigioli gearbox: Type SK 185 Siemens electric motor: 346 to 524 volts, 160 watts Lhsdpfx Amjwk E Emomeh

Condition: ready for operation (used), * Brand: Nordberg Lhjdpfsywmkkex Ammjh * Model: feeding table with hopper * ding table: 5000 x 1100 mm * Dim. hopper: 5500 x 3700 x 2500 mm * Driving: 22 kW E-motor

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Serial numbers – Bulk Hopper: 706-E15 & Bucket Elevator: 706-E11. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Lhjdpsynnliefx Ammeh Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: good (used), - Output: up to max. 30to/h - Motor: 400V, 50Hz - Without electrical equipment Ljdpfxomn I Nqs Ammehh Mass: - Length: approx. 2000mm + discharge screw - Width: approx. 1700mm - Height: approx. 1700mm

Condition: good (used), Machine type: Vibratory bowl feeder / Parts feeding systems Design: Bowl feeders and linear tracks Lsdpfoytqgmex Ammjhh Version: Multiple feeding systems available Conveying system: Vibratory bowl feeder with linear track Feeding unit material: Stainless steel / Metal construction Function: Automatic feeding and orientation of plastic parts Application area: Injection molding automation / Assembly systems / Packaging lines Buffering system: Bowl container for parts storage Integration: Component of automated production lines CE marking: Available Further information, technical specifications, and quantity upon request.

Year of construction: 2000, condition: used, machine/vehicle number: 000101-6, stainless vibratory feed conveyors, adjustable vibration for product control, on stainless frame. 1Ph. Lhededg H Ipspfx Ammsh

Condition: used, Stainless steel dosing screw, feed screw conveyor, auger Equipped with additional feed hopper with aluminium lid Screw diameter: 200 mm Motor power: 3 kW, 36 rpm Lodpfxsx Nzu Uo Ammshh Total length: 1730 mm See our other listings VMA Wekerom

Condition: good (used), conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Belt conveyor on solid base frame with feed hopper -Speed: 3.4/6.6 m/min -Belt width: 190 mm Lhedevazpuspfx Ammoh -Conveyor length: 745 mm -Drive: VEM 0.14/0.25 kW, see photo nameplate -Transport dimensions: 460/1255/H1185 mm -Weight: 149 kg

Condition: good (used), Feed container for blasting system, sandblasting system, blasting system, sandblasting cabinet, rotary basket system, wire belt, overhead conveyor and roller conveyor blasting system, free blasting system -Handover: in its current condition as inspected -System: Individual components see photos -Feed container: Type Exactomat 2 G - 60 -Vacuum pump flow rate: 26.2 m³/h Lhodeqcyzwopfx Ammsh -Dimensions: 830/580/H1730 mm -Weight: 296 kg

Condition: excellent (used), Offered is a used feed hopper with pre-screening. Manufacturer: Haver & Boecker. Year of manufacture: 1995. Type: UF 1200x3650. Lhedpfxjv N H Hdo Ammoh Very good condition, fully functional.

Condition: repair required (used), feed hopper / buffer hopper Ledpowydmnsfx Ammjhh

Year of construction: 2025, condition: new, For sale: New buffer hopper with a loading grate equipped with a removable deagglomeration screen Lsdpfsw Tc Txox Ammjhh

Year of construction: 2021, operating hours: 1,513 h, condition: used, functionality: fully functional, overall weight: 11,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B205, Our robust FEED HOPPER is specifically designed for the precise dosing of challenging, hard-to-meter feed materials. Equipped with a plate belt, the hopper reliably handles abrasive or coarse-grained materials. With a capacity of 7 m³ and an optionally integrable leveling roller, the feed rate can be adjusted. Lhodpfx Amoxta D Tsmsh This module is part of our rental fleet.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 66184003, type of input current: three-phase, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 380mm Chipping Width : 650mm Rotor - Diameter : 1200mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 30-40 t/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Electric Motor : 2 x 125kW Voltage : 380-400V Geared Motors : 2 x 11kW Sew Eurodrive Infeed Rollers : 9 Pcs Ledpfx Amsw U A Skomshh Feeding : Horizontal Drive : By Belt

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: TH 600 / 1050 / 11, overall weight: 35,000 kg, type of input current: three-phase, total height: 2,310 mm, total length: 4,400 mm, total width: 2,906 mm, input voltage: 380 V, feed length X-axis: 1,054 mm, feed length Z-axis: 651 mm, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 600mm Chipping Width : 1050mm Rotor - Diameter : 1600mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 50-150 rm/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Electric Motor : 2 x 400kW Voltage : 380-400V Geared Motors : 2 x 15kW Sew Eurodrive Infeed Rollers : 11 Pcs Feeding : Horizontal Lhodpfjw S In Ejx Ammjh Drive : By Belt GT54 x 2

Year of construction: 2006, condition: excellent (used), functionality: fully functional, KIREMKO BRSET660 | Double screw conveyor with hopper / Vertical conveyor Manufacturer: Kiremko Model / Type: BRSET660 Serial number: 05-1070-AE Year of manufacture: 2006 Power supply: 400 V, 50 Hz, 3 phases Screw diameter: 600 mm Screw pitch: 250 mm Lifting / discharge height: 2800 mm Dimensions: 6800 x 2200 x 4300 mm Ledpfezczqzjx Ammohh Professional, high-performance double screw conveyor from the Dutch brand Kiremko – a global leader in the production of processing lines for the potato and vegetable industry. The device is designed for continuous operation in demanding industrial conditions. It is ideal for large fruit and vegetable processing plants (potatoes, root vegetables). The heart of the machine is a powerful, integrated buffer and feed hopper, working with two massive stainless steel screws with an impressive diameter of 600 mm and a pitch of 250 mm. This configuration prevents the material from "jamming," ensures even distribution, and allows for trouble-free transport of materials with varying particle sizes and high viscosity to a height of up to 2800 mm.

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: presumably SRC-N 250-2R Year of manufacture: approx. 2000 Bowl diameter (bottom): 250 mm Bowl diameter (top): 380 mm Bowl internal height: approx. 90 mm Sorting track width: 30 mm Overall height (drive + bowl with sorting track): 405 mm Oscillation frequency: 100 Hz / 6000 min-1 Mains connection: 230 volts, 50 Hz - Control unit RNA, type ESG 90 for adjustable vibration speed - Vibratory bowl with rubber coating - The conveyor was used for feeding automotive fuses Lhjdpfx Aezbhuqemmoh Space requirement Ø x H: 430 x 405 mm Weight: 38 kg Good condition A spiral conveyor always consists of two essential components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.