Used Back-Pressure Steam Turbine Gt 500-4 for sale (77,233)

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. Dcodpsz E Nh Njfx Adren The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: KT 615-7, pressure: 15 bar, power: 1,700 kW (2,311.35 HP), temperature: 325 °C, rotational speed (min.): 7,673 rpm, Steam turbine M+M Turbinen-Technik – 1.7 MW Industrial top quality For sale: Complete, high-quality industrial steam turbine installation from the renowned German brand M+M Turbinen-Technik GmbH. The steam turbine has already been dismantled by a specialized company. All necessary documents, manuals, diagrams, etc., are complete and available. Key specifications: Dedpfx Adezbkgijrocn Type: KT 615-7 Power: 1700 kW (1.7 MW) Year of construction: 2009 Speed: 7673 rpm Inlet pressure: 15 bar (abs) Outlet pressure: 0.1 bar (abs) Inlet temperature: 325 °C Description: This robust steam turbine is built according to German quality standards and guarantees high efficiency and a long service life. The installation is complete with control and measuring systems, valves, and piping, and was used in an industrial environment. The turbine is currently dismantled/disassembled in preparation (as shown in the photos), which simplifies transport and reinstallation. Ideal for reuse in a new installation or as an expansion of existing capacity. Advantages: Reliable and proven technology Compact and powerful output (1.7 MW) Complete system (including control equipment) German top quality Suitable for various industrial applications Applications: Combined heat and power (CHP) Industrial power supply Waste heat recovery Process industry 📩 Interested or would you like more information? Please feel free to contact us for technical details, a viewing, or a customized quote.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, planing width: 500 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,700 rpm, total length of planing tables: 800 mm, total width: 920 mm, total height: 1,140 mm, overall weight: 450 kg, VEBA S500 PLANER | 500 MM | 4 KNIVES | 4.3 kW | 2009 | ITALY | Professional VEBA S500 planer/thicknesser from the renowned Italian company VEBA Meccanica S.r.l. This machine is designed for the precise planing of wooden components to a specific thickness. Its robust, compact design and 4-knife cutterblock make it ideal for use in both carpentry workshops and for the production of solid wood components. Made in Italy, this machine is used and ready for operation. KEY FEATURES: - Renowned Italian brand VEBA - Model S500 - Planing width of 500 mm - 4-knife cutterblock - Traditional knives - Robust construction - 2 feed speeds - Material height range up to approx. 240 mm - Maximum planing depth of 8 mm - Table height adjustment - 2 rollers in the table to facilitate material feed - Machine equipped with CE marking - Year of manufacture 2009 TECHNICAL DATA: - Planing width: 500 mm - Work table dimensions: approx. 500 × 800 mm - Material height range: approx. 4–240 mm - Maximum planing depth: 8 mm - Planing cutterblock: Ø 110 mm - Number of knives: 4 pcs - Type of knives: traditional - Cutterblock rotational speed: approx. 4700 rpm - Feed speed: 6.5 / 13 m/min - Table rollers: 2 pcs Dcsdpfx Adez A A Iwersn - Height adjustment: electric and mechanical MOTOR / POWER SUPPLY: Motor power: 4.3 kW Voltage: 400 V Power supply: 3 phases DIMENSIONS AND WEIGHT: Machine dimensions: approx. 1000 × 920 × 1140 mm Weight: 450 kg – according to the nameplate We invite you to test the machine on-site. Financing options available through leasing or installment plans. WE ORGANIZE TRANSPORT.

Condition: excellent (used), Price quoted per unit. Professional LeCroy 9354AL digital oscilloscope designed for advanced measurements and diagnostics of electronic circuits. The device is equipped with 4 measurement channels, a 500 MHz bandwidth, and a high sampling rate, making it suitable for research laboratories, electronics service centers, industrial automation, and R&D departments. Dcodpfxozaf Skj Adron Technical specifications: • Manufacturer: LeCroy • Model: 9354AL • Type: digital oscilloscope • Bandwidth: 500 MHz • 4 measurement channels • Sampling rate up to 2 GS/s • Acquisition memory up to 8 Mpts • BNC inputs • Built-in CRT screen Condition: Used device, fully functional. The oscilloscope starts up correctly and displays waveforms. Normal signs of wear and tear are visible, resulting from use and storage. Note: One of the plastic housing elements at the back has a crack. The damage is purely cosmetic and does not affect the device's operation or performance parameters.

Condition: excellent (used), I am offering for sale a professional LeCroy WaveJet 354A digital oscilloscope, designed for laboratory, service, and industrial applications. This is a high-quality measuring instrument with a bandwidth of 500 MHz and a sampling rate of 2 GS/s. Technical specifications: • Manufacturer: LeCroy • Model: WaveJet 354A • Bandwidth: 500 MHz Dsdpfxjzru Sie Adrjcn • Sampling rate: 2 GS/s • 4 analog channels • USB port • Built-in carrying handle • Power supply: 90–264 V AC, 47–63 Hz Condition: • Used, in good visual condition with normal signs of use. • The device powers on and functions correctly – the display is working, as can be seen in the photos.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2954, turning length: 100 mm, spindle speed (max.): 4,000 rpm, total height: 1,900 mm, total length: 4,800 mm, total width: 1,800 mm, overall weight: 3,600 kg, bar passage: 42 mm, number of driven tool stations in tool turret 1: 2, Equipment: documentation/manual, MÜGA GT 542 M CNC turning machine - Number of NC axes: 5 - Swing diameter: max. 700 mm - Rapid traverse rate: 17.5 m/min - Spindle power: 7.5 kW - Collet chuck: ISO DIN 173E Djdpfx Asz I I Umodrjcn - Tool holder, square: 20 x 20 mm, round: 20/25 mm - C-axis resolution: 0.1° - Tool positions: 14 external, main spindle: 5, internal: 3 + 4 - Driven tool positions: 2 - Simultaneous machining on the inside and outside - With technical documentation - With accessories such as various clamping jaws, holders, square turning tools, indexable inserts, etc. - With bar guide, length approx.: 2200 mm - Dimensions of the machine body: 2600 x 1800 x 1900 mm FCA-D 97711 gauge block – loaded onto a truck.

Condition: used, Year of construction: 2022, operating hours: 540 h, Okleiniarka wąskich płaszczyzn + + stacja XES200 Producent: HOMAG Typ: EDGETEQ S-500 KAL375 AT Rok 2022 + stacja XES200 przeznaczoną do obsługi systemu klejowego PUR zastosowanie technologii airTec Sterowanie: HOMAG powerControl PC23 z ekranem powerTouch Wyposażenie: agregat wstępnego frezowania, jednostka klejowa technologia airTec Dsdpfx Aezkmqzodrscn agregaty obcinające agregaty frezujące, agregaty zaokrąglające cykliny polerki Dodatkowe wyposażenie: stacja serwisowa HOMAG XES 200. only 540 working hours!!

Condition: used, Year of construction: 2012, functionality: limited functionality, power: 45 kW (61.18 HP), Steam turbine Manufacturer: Siemens Type: AFA 2.5 Year of construction: 2012 Fresh steam pressure: 4.10 bar Fresh steam temperature: 153°C Fresh steam quantity: t/h Wheel chamber pressure: bar Wheel chamber temperature: °C Exhaust pressure: 0.90 bar Exhaust temperature: 140°C Electrical power: 45 kW Rated speed: 3,000 rpm Quick stop speed: 3,600 rpm Steam turbine with generator and vacuum condenser with pumps, without inspection, as is, without overhaul at current location. bps Consulting GmbH CONSULTING | PLANNING | SERVICE Dcedpfx Adex H Rwyjrjn Steam turbines | Power plant systems and components info(at)bps-energie.de

Condition: excellent (used), functionality: fully functional, Electronic control of X-axis X-axis positioning speed (m/min) 25 Pneumatic tilting heads External tilt 45° Mechanical adjustment of intermediate angles Hydro-pneumatic blade feed Usable cutting length (mm) 4,000 Minimum standard cut with 2 heads at 90° (mm) 310 Blade diameter (mm) 500 Feelers / copy sensor Dedpfx Aoyn Adyodrjcn

Condition: new, functionality: fully functional, Year of construction: 2023, control type: PLC-controlled, degree of automation: automatic, actuation type: electric, controller manufacturer: SIEMENS, coil inner diameter: 450 mm, coil outer diameter: 1,200 mm, coil weight: 500 kg, coil width: 300 mm, sheet thickness (max.): 3 mm, overall weight: 190 kg, power: 0.55 kW (0.75 HP), input voltage: 240 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: CE marking, documentation/manual, Motorized Coil Sheet Decoiler Model: VILTECH/DOREMA DCT 500/4 CE Strip width: 10 – 300 mm Strip thickness: 0.3 – 2.5 mm (capable up to 3 mm) Coil inner diameter: 450 – 500 mm Dcedpfx Adoyqxx Esrsn Coil outer diameter: max. 1200 mm Load capacity: 500 kg Motor: SIEMENS single-phase 0.55 kW Coil centering: manual Drive: geared motor transmission Operation: automatic with direction reversal Delivery from stock Also available: motorized, non-motorized, and hydraulic decoilers with load capacities from 200 kg up to 20,000 kg.

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Dcsdpfx Aez Hxmwedron Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2109, pressure: 12 bar, power: 814 kW (1,106.73 HP), temperature: 192 °C, Fire-tube steam boiler HKB SHP 1250, 1250 kg steam/hour, 12 bar certified pressure, 814 kW. Dodoyu Ikxjpfx Adrscn The listed price is for the boiler in its current condition, but we can offer various additional services. Such as: New insulation, control cabinet, overhaul and pressure test, burner and devices, installation, etc.

Condition: used, This listing is for the APC Back-Ups CS 500 UPS The unit is in full working condition and is ready for immediate use Key Specs & Performance Capacity: 500 VA / 300 W – suitable for basic PC setups, modems, routers, or low-power peripherals Runtime: ~2.4 minutes at full 300 W load ~13.8 minutes at half load (150 W) Topology: Off-line (standby) UPS with ~6 ms transfer time Waveform Output: Stepped approximation to a sine wave Connections & Interfaces Input Connection Type: IEC 60320 C14 Output Connection Types: 3 × IEC 60320 C13 (Battery Backup + Surge Protection) 1 × IEC 60320 C13 (Surge Protection Only) 2 × IEC jumper surge-protected outlets Number of Cables: 2 included Data-Line Protection: RJ-11 phone/fax/DSL line Communication Ports: USB + optional RS-232 Management Software: Supports APC PowerChute Personal Edition Battery & Power Battery Type: Sealed lead-acid maintenance-free (VRLA) Battery Cartridge: APC RBC2 Battery Recharge Time: ~8 hours User-replaceable: Yes, hot-swappable Battery Life Expectancy: 3–6 years Dcjdpsxv Duzjfx Adrjn Cold-Start Capable: Yes Self-Test: Automatic periodic testing Surge & Safety Features Surge Energy Rating: 300–310 J Noise Filtering: Full-time EMI/RFI filtering Audible Alarms: Yes – for battery use, overload, low battery LED Indicators: Status display panel Certifications: CE, VDE, GOST, C-Tick Resettable Circuit Breaker: Included Physical Characteristics Height: 16.5 cm Width: 9.1 cm Depth: 28.4 cm Net Weight: 6.03 kg Color: Beige/Light grey (typical for CS series) Noise Level: Approx. 40–45 dBA

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. Dcjdpfsyidvdex Adron The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Plockmatic SD-500” booklet-making system Item for sale: 1 x Plockmatic SD-500 with the following equipment: incl. SD BM Booklet Maker incl. SD-BF Bookfold incl. SD RCT Rotate Crease Trim incl. SD-BF Bookfold Meter readings: Total: Approx. 4187 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order Packaging and dispatch: Dcsdpfx Adozz Rp Asrsn You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Year of construction: 2008, operating hours: 79,894 h, functionality: fully functional, pressure: 62 bar, power: 5,552 kW (7,548.61 HP), temperature: 480 °C, rotational speed (min.): 10,700 rpm, rotational speed (max.): 11,785 rpm, type of cooling: water, For sale: two complete GTA units (MAN turbine with heat extraction, gearbox, generator, lubrication systems, control systems, spare parts...). Dcsdpfx Adezdqmyorsn One GTA unit is designed for steam at approximately 52 bar and 450°C, the other for steam at approximately 62 bar and 480°C. Please contact us by email for any further information. Submit your offer per GTA unit.

Condition: used, Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dcjdpez Izmijfx Adrjn Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Condition: good (used), Year of construction: 2016, functionality: fully functional, Oce Arizona 460 GT Year of manufacture: 2015 (installed in 2016) Color: 4C + 2 white Resolution: 1440 dpi Djdpozzpf Aefx Adrecn Speed: up to 34 m²/h Variodot: 6 pl - 42 pl Format: 2.5 m x 1.25 m

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MINVAP VPXpert K 10c, Manufacturer: Grabner Instruments Messtechnik GmbH - Type: MINVAP VPXpert K 10c - Year of manufacture: 2017 - Technical data: > Measured temperature range: 0 to 120°C (user programmable) > Temperature stability: ±0.01°C > Temperature profiles: single temperature, stepped, or ramp mode > Pressure range: 0 to 1000 kPa (0 to 145 psi) > Pressure resolution: 0.1 kPa > Pressure tolerance: 0.1 kPa > Vapor-liquid ratio: 0.02/1 to 100/1, adjustable per selected method > Power requirement: 90-264 V AC, 45-63 Hz, 200W (mains supply) > Field application DC/AC power converter: 12V / 200W > Dimensions (W x H x D): 253 x 368 x 277 mm (10 x 14.5 x 10.9 in) > Weight: 9 kg (20 lb) > Precision data: Dodpfx Adjxt H Hherocn > Repeatability: ±0.3 kPa (0.04 psi) > Reproducibility: ±0.7 kPa (0.10 psi)

Condition: ready for operation (used), Bow saw RUCOCO, type RSR 500 - 4 -SAW DIAMETER 500 mm -STROKE RATES 34-48-60-85 strokes/min -MITER CUTTING DEVICE -REPLACEMENT SAW BLADES 850x75x4mm -MACHINE FEET -COOLANT SYSTEM -DOCUMENTATION Dsdjzbz Tgepfx Adrocn Dimensions: L x W x H 2.2 x 1.5 x 1.5 meters / Weight 2800 kg Errors and omissions excepted.

Condition: used, Technical specifications: Max. planing width: 520 mm Max. planing height: 300 mm Cutterhead diameter: 110 mm Number of knives: 4 pcs Feed rate: 5/8/12/19 m/min Electric lifting Dust extraction port: 160 mm Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 1060 mm Width: 1050 mm Height: 1280 mm Dcsdpfxjzvmlpj Adron

Year of construction: 1997, condition: used, Technical details: Rated capacity: 1100 kVA Revolution per minute: 1500 U/min type of fuel: Wasserstoff / Steam / Vapor max. temperature: 420 Grad weight: 3,9 t STEAM TURBINE other data: - Power: normal 560 kW and max. 820 kW - P1 64 bar - P2 11,5 bar - 1N = 1500 Ampere - Generator type DSG74-M1-4W; 400 V; - Generator nominal power: 1053 kVA / nominal effective power 820 kW - Turbine is suitable for operation with exhaust steam temperature of approx. 405 °C. - A throughput of 2.8t live steam / h in continuous operation is only possible in load-free condition. Sale of the turbine as described and as is! The performance data given are manufacturer's data. These may vary due to age-related wear! We do not have and do not sell spare parts. For spare parts please contact the manufacturer: Dresser-Rand Siemens !!! i.D. Dsdpju Nvbuefx Adrjcn *

Condition: good (used), Falch T5H, 500 bar, 30 l/min, 2850 operating hours. Dsdpfxsy Dvmus Adrocn Completely overhauled by a Falch service center in 2021.

Condition: new, functionality: fully functional, operating pressure: 180 bar, empty load weight: 135 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KARCHER HDS 8/18-4 CXA PRESSURE WASHER TECHNICAL DATA: Model: HDS 8/18-4 CXA Manufacturer: KARCHER Country of manufacture: Germany Series: Professional Condition: NEW (washer in factory packaging) Type: Hot water Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Discharge capacity (l/h): 300-800 Working pressure (bar): 30-180 Maximum pressure (bar): 220 Fuel consumption (kg/h): 5.2 Water heating range (°C): min 80 - max 155 Fuel consumption in eco mode! (kg/h): 4.2 Connected power (kW): 6 Power cable (m): 5 Hose length (m): 15 Fuel tank (l): 15 Weight with packaging (kg): 135 Dimensions (L x W x H) (mm): 1250 x 650 x 920 KARCHER HDS 8/18-4 CXA EQUIPMENT: Pressure gun: Karcher Professional !EasyForce Advance High-pressure hose: Karcher Professional 15M, DN6, 250BAR, 155°C - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Power nozzle with 25° flat stream. Flat high-pressure jet with high surface coverage and good dirt removal. Pressure regulator: ServoPress pressure regulator Automatic drum: Integrated, original automatic drum WHY CHOOSE THE HDS 8/18-4 CXA? With its ability to heat water to 155°C (steam cleaning above 100°C), the HDS 8/18-4 CXA, combined with a cleaning agent, effectively removes even the most stubborn dirt. The device also uses minimal water and fuel for heating thanks to the eco!efficiency mode, ensuring economical operation. Thanks to its compact dimensions and low weight, the device can be easily transported in a station wagon. Accessory holders on the rear of the housing allow for convenient storage of the lance and power cable. The large water filter installed at the water inlet is easy to remove and clean, further protecting the pump from water contamination. Large wheels and a compact, vertical design make it easy to transport the device over uneven terrain and overcome obstacles such as curbs. AUTOMATIC HOSES REEL: The HDS 8/18-4 CXA model is equipped with a unique, automatic hose reel, which significantly improves workflow. The automatic rewind system helps keep things organized, saves time, and protects the hose from mechanical damage when reeled. The reel itself is made of the highest quality materials, ensuring trouble-free operation. KARCHER HDS 8/18-4 CXA RELIABLE | DURABLE | ERGONOMIC The HDS line emphasizes ergonomics and work comfort. Due to its compact size, the device can operate in hard-to-reach places or where work often requires multiple locations. The device is equipped with a unique, automatic pressure hose reel. Additional handles allow for transporting the device with additional accessories. A brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from contaminants that may be present in the water. Dcjdpfxey Sm Dgs Adron Standard equipment includes an EASY!Force high-pressure gun with a rotating lance, a 15m high-pressure hose with an automatic reel, a pressure regulator, and a power nozzle. EASY!Force technology reduces the force required to hold the gun trigger to zero. The device also features the EASY!Lock accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. The device is brand new and factory-sealed.

Condition: refurbished (used), functionality: fully functional, We offer 4 Schlick turbines - 320 mm, including 7.5 kW motors. Turbine model: Schlick ROTO-JET RB500 5.2/4/7.5 Turbine type: 5.2 Dcsdpfx Adevphf Uorjn Abrasive flow rate: 140 kg/min. Abrasive velocity at the outlet: 70 m/sec. Turbines are overhauled, with original spare parts used. Blasting equipment, shot blasting machine, sandblasting machine… PRICE PER UNIT - 2700 EUR.